OWEN LUCERO BAUTISTA

Mobile No.: +63 933 369-1789 / +63 915 588 6971 / +63 923 913 4401
Email: [email protected] / [email protected] /
[email protected]
APPLYING FOR.:
- MANUFACTURING and/or PRODUCTION DEPARTMENT HEAD
- ENGINEERING and/or QA/QC DEPARTMENT HEAD / DEPUTY QMR & EMR

NEW PROJECT ENGINEERING METS LOGISTICS INC.

New Plant / Building / Machine for Governor’s Drive, Brgy. Bancal,
Structural / Cold and Dry Warehouse Carmona, Cavite Philippines 4118
And Meat Processing (Toll Packing) February 16, 2015 – January 15, 2017

SUMMARY OF QUALIFICATION (PRODUCTION, QUALITY and EFFICIENCIES).:

 Responsible in monitoring the plans for production to meet the desired targets.
 Responsible in monitoring the efficiency of manpower, machine & equipment.
 Coordinate set-up and implements standard operating procedure for all production operations.
 Ensure preventive maintenance is completed on time per schedule per machine.
 Ensure compliance to prescribed QMS and EMS (IMS).
 Ensure implementation of health & safety procedures aligned to BWC compliance.
 Implement & drive continuous improvement activities through implementation of change management
process & best practices.
 Ensure material and manpower resources needed to meet or exceed the planned KRA/KPI resulting into cost
effective department leading into motivated team of worker.
 Prepare corrective and preventive action plan for non compliance issued to Engineering Department.
 Review floor plan lay-outs and its structural requirements based on the approved lay-out.
 Pre qualification review for new machine, process and storage.
 Involved in new product development and Parts Localization Project/Development of Local Supplier.
 Participates in cost reduction and work conditions improvement of every project.

KNOWLEDGED AND MACHINE ORIENTED.:

 Compressor Machine for Refrigeration System (Ammonia / 404 / 502 – Chilled Water Set-Up).
 Steam Boiler Machine, Cooling Tower, Ice Maker, Condenser Units and Air Compressor.
 Motorized Palette, Reach Truck, Counter Balanced and Forklift (1 Ton to 12 Tons Capacity)
 Meat Processing Machines .: Meat Flakers , Grinder, Mixer, High Speed Bowl Cutter, Emulsifier, Stuffing
Machines, including Smoke House, Cutting and Packaging Machines.

METAL STAMPING / FABRICATION CENTRO MANUFACTURING CORPORATION

PRODUCTION DEPARTMENT HEAD Lot 7, Blk.5 Cavite Light Industrial Park
Brgy. Maguyam, Silang, Cavite Philippines 4118
September 11, 2014 – January 15, 2015

Have ten (10) years experience in Tooling & Die Industry,

Metal Stamping and Fabrication, Aluminum / Metal Gravity
and Die Casting.

DUTIES AND RESPONSIBILITIES.:

 Reporting to the Plant Operation Manager / Production Manager

 Initiates plan, leads qualification run of new product and lines from machinery set-up, process evaluation
including customer sample making up to pre-mass production stage.
 Ensure all processes, documents and procedures are in compliance with product design rules to ensure that
the new product is ready for mass production.
 Ensures assembly related documents such as Control Plan, Manufacturing Working Guide, latest Drawing
Specification are available prior to production release of new product.
 Initiates and recommends plan for continual improvement activities such as cost reduction and machinery
innovation.
 Trains, leads and supervises Quality Assurance Inspector.
 Supervises production leader and inspector to ensure concrete support to production department to attain
rejection free and smooth flow of production.
 Initiates and recommends plan for continual improvement not only in the field of Quality but also in the area
of Productivity and Yield.
 Evaluates and qualifies new products prior to mass production.
 Ensures all Quality Process Documentation are updated.
 Perform stable tools (QC Tools / G8D and MSA (Minitab) to create a strong decision making skills for parts
related issues.
 Monthly performances meeting include in schedule, discussing abnormalities, rejections and non-
conformances on process and product characteristic encountered.

MANUFACTURING DEPARTMENT HEAD MENIMA CASTING PRODUCTS INC.

J.Y Sons Bldg Lot 9& 10 Ph2 FCIE, Brgy. Langkaan
Dasmariñas City, Cavite Phil’s.
January 05, 2012 – June ‘2104

QUALITY CONTROL and ASSURANACE / CHORYO TOOLINGS SYSTEM INC.

PRODUCTION DEPARTMENT HEAD Brgy. Lumil, Silang, Cavite Philippines
November 12, 2003 to April 01, 2013
April 01 to December 30, 2012

DUTIES AND RESPONSIBILITIES.:

 Plans, organizes and directs the daily manufacturing and maintenance operations. Initiates plans and
programs which minimize manufacturing costs through effective utilization of manpower, equipment,
facilities and materials for customer requirements and needs (Wacker Neuson Phil’s. Inc.).
 Works directly with department managers to coordinate purchasing, product development, quality
assurance, production & delivery operations while ensuring product standards that will exceed customers’
expectations.
 Establishes policies and procedures, recommends programs, oversees production schedules, initiates and
conducts performance reviews and motivates staff to meet production goals.
 Implements manufacturing strategies and action plans to ensure the attainment of CTSI’s and MCPI’s
strategic initiatives.
 Upholds a safe & healthy work environment by handling and overview the installation of new machines and
equipments.
  Investigate operational problems affecting operations in the workshop.
 Brings in new methods and processes liasing with other designer.
 Improves the manufacturing, operation process thru improvement of time of management skills of the staff.
 Facilitate workers certification to meet the international standard.
 Performs cost estimation and prepare bill of materials coordinated with Planning and Purchasing
Department.

POLLUTION CONTROL OFFICER CHORYO TOOLINGS SYSTEM INC.

(DENR-EMB / LLDA) Brgy. Lumil, Silang, Cavite Philippines
April 2005 – Present

DUTIES AND RESPONSIBILITIES.:

 Complies with the entire legislative and regulatory requirements and applies corresponding industry codes
of practices.
 Implements policies and disciplines pertaining to hazardous equipment, materials and substances.
 Reviews periodically compliance of the Choryo Toolings System Inc. with the Environmental Standards and
maintain its effectiveness.
 Ensures compliance of associates / workers to health and safety practices in accordance with the
Environmental Standards.
 Coordinates with Safety Practitioners on Emergency preparedness, initiatives, and other Environmental
Programs and related trainings.
 Performs other related duties.
 Training for new updates in Environmental Waste Management and familiar issues in ISO 14001
Implementation and Documentation.
 Patrol and Audit includes in schedules to assure the compliance on environmental aspect and its mitigating
measures.
 Reports to the DENR-EMB Regional Director and LLDA General Manager.

TRAININGS / SEMINARS ATTENDED.:

HOW TO BECOME AN EFFECTIVE MANAGEMENT REPRESENTATIVE (QMR & EMR)

DEPARTMENT OF TRADE AND INDUSTRY - Philippines Trade Training Center
Seminar Room F, 2nd Floor, PTTC Bldg.
Sen. Gil J. Puyat Ave.cor.Roxas Blvd., Pasay City Philippines
March 21, 2014

CONTINUING ENVIRONMENTAL EDUCATION PROGRAM for PCO’s

DEPARTMENTOF ENVIRONMENTAL AND NATURAL RESOURCES
LAGUNA LAKE DEVELOPMENT AUTHORITY - Pasig River Rehabilitation Commission
Camelot Hotel, Quezon City Philippines
December 11 – 13, 2013

REFRESHER COURSE ON RoHS “Restriction on Hazardous Substances“ and C.P.A.R Orientation

Panasonic Manufacturing Philippines Corporation – Quality Control Team
Ortigas Ave. Extension Taytay, Rizal Philippines
November 22, 2012

POLLUTION CONTROL ASSOCIATION OF THE PHILIPPINES, INC. – REGION VI CHAPTER

Pollution Control Officer SUMMIT / CONFERENCE 2011
DEPARTMENTOF ENVIRONMENTAL AND NATURAL RESOURCES
ENVIRONMENTAL MANAGEMENT BEREAU – CALABARZON REGION IV-A
LAGUNA LAKE DEVELOPMENT AUTHORITY
Summit Ridge, Tagaytay City, Cavite Philippines – October 07, 2011
EFFECTIVE LEADERSHIP SKILLS TRAINING and WORKSHOP
DEPARTMENTOF TRADE AND INDUSTRY - Philippines Trade Training Center
Seminar Room G, 2nd Floor, PTTC Bldg.
Sen. Gil J. Puyat Ave.cor.Roxas Blvd., Pasay City Philippines
May 09, 2011

ISO9001:2008 and ISO:2004 Awareness Training - January 29, 2011

EMS Training / Aspect Identification Evaluation - February 12, 2011
Internal Audit Training (ISO9001:2008 and ISO14001:2004 - February 19, 2011
SYSTEMTECH ENGINEERING AND CONSULTANCY
Choryo Toolings System Inc.
Purok 2 Brgy. Lumil Silang, Cavite Philippines

MACRO VISION CONSULTANCY TRAINING & CONSULTANCY

Internal Auditing Course for Legal Requirements / Update on Environmental Legislation
Macro Vision Training Room – Block 4, Lot 11 Diamond St.. Camella Homes
Bay View Park Hotel / South 1 Annex, San Pedro, Laguna Philippines
April 04, 2006 / November 29 to December 01, 2007

Pollution Control Officer (PCO) Appointment and Issuance of Certificate of Accreditation

DEPARTMENTOF ENVIRONMENTAL AND NATURAL RESOURCES
ENVIRONMENTAL MANAGEMENT BEREAU – CALABARZON REGION IV-A
6th Floor DENR by the by Bldg., 1515 Roxas Blvd.,Ermita Manila Philippines
January 16, 2006

LAGUNA LAKE DEVELOPMENT AUTHORITY ( DENR - LLDA )

Seminar / Workshop on Environmental Regulations
Waste Minimization and Pollution Prevention
Camelot Hotel, Quezon City Philippines
April 13-15, 2005

NWPC 1st IV Integrated Course for Managers and Supervisors

Ford Motor Phil’s., Sta. Rosa, Laguna Philippines
February 22-24, 2005

MSA Training Course and Short Intro on Statistical Process Control

Measuring System Analysis (MSA TRAINING COURSE +)
Introduction on SPC – Management Strategies Enterprises
Phinma Training Center, Tagaytay City, Cavite Philippines
October 12-13, 2004

ENVIRONMENTAL MANAGEMENT SYSTEM DEVELOPMENT COURSE

MEPCo - Panasonic, Taytay, Rizal Philippines
August 10-12, 2004

ISO/TS 16949 Awareness and Core Tools Training for FMEA, SPC, APQP, PPAP, MSA
CHORYO TOOLINGS SYSTEM
Brgy. Lumil, Silang, Cavite Philippines
May 12-14, 2004

PROCESS and PRODUCT NIDEC COPAL PHILIPPINES CORPORATION

ENGINEERING SECTION Light Industry Science Park of the Philippines
(HDD and RM) HEAD Brgy. Diezmo, Cabuyao, Laguna, Philippines
July 1999 – January 2003

DUTIES AND RESPONSIBILITIES.:

 Concerns in evaluation and approval of machines and materials prior to production run start process.
 Monitors and updates manufacturing documents such as Work Instruction Procedures, Process Flow Charts,
Inspection Plans and Data Sheets.
 Determines most efficient method of producing TAPE DRIVE MOTORS for customers (Quantum USA)
 Prepares data and work instruction procedures, flowcharts and production inspection and other documents
necessary to assemble Reel Motor / Tape Drive Motor.

SUMMARY OF QUALIFICATIONS (HDD and REAL MOTOR ASSEMBLY).:

 Have more than 4 years of experience working in Electronics Industry.
 Well-experienced in producing, improving and evaluating Motor Driver Assembly for Quantum USA.
 Statistical Process Control development through Six Sigma Belt Approach and Geometric Tolerance.
 Performs and Manages FA1, Cp/CpK and Audit/Test Result Submission Report for new product.
 Concrete knowledge on SPC and Process Control as well as ISO 9001, ISO 14001, QS 9000 and TS 16949
Management System.
 Monitors and updates manufacturing documents such as Work Instruction Procedures, Process Flow Chart,
QC Flow Charts, Inspection Plans and Data Sheets.
 Determines most efficient method of producing TAPE DRIVE/HDD and Spindle Motors (Quantum USA/
Malaysia, NEC /IBM Hong Kong and Seagate Malaysia).

TRAININGS / SEMINARS ATTENDED.:

NCMC Trainer on Motor Baseplate Assembly 1st CIT / QCC Conference

Nidec Copal Philippines Corporation – Philippines NCP Corporation – Philippines
December 03, 2001 October 26, 2001

NCMC Trainer on Motor Baseplate Assembly Advance Training on MSA

Nidec Copal Philippines Malaysia NCP Corporation – Philippines
Nigeri Sembilan / KL Malaysia December 04 - 06, 1999
August 03 to 30, 2001

Advance Statistical Process Control (ASPC) Statistical Process Control (SPC) / FMEA
Nidec Copal Philippines Corporation – Philippines NCP Corporation – Philippines
December 02 - 06, 1999 August 26, 1999

EDUCATION:
 B.S. Electronics and Communication Engineering
TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Manila, Philippines
1993 – 1998

High School Diploma

STA. ROSA EDUCATIONAL INSTITUTES
Sta. Rosa City, Laguna, Philippines
1989 – 1993

Elementary Diploma
MACABLING ELEMENTARY SCHOOL
Sta. Rosa City, Laguna, Philippines
1983 – 1989

PERSONAL INFORMATION.:

Age : 40 years old

Birth Date : February 16, 1977
Civil Status : Single
Citizenship : Filipino
Height : 5’ 10 1/2”
Weight : 205 lbs.
Dialect Spoken : English, Filipino
Passport No. : WW0106054
Date of Issue : 29 August 2007
Date of Expiry : 29 August 2012
Place of Issue : Lucena City

Owen L. Bautista
Applicant