Scribd
Upload
255 views3 pages

Digital Electronics Lab Assignment 2

D flip-flop functionality was studied through a digital electronics lab assignment. The truth table for a D flip-flop was provided. A simulation was conducted where the D flip-flop output toggled between 1 and 0 depending on the D and clock input values. Proper enabling of power sources and a clock pulse of 1 were needed to obtain a precise graph of the simulation results.

Uploaded by

Sanjoy Pathak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
255 views3 pages

Digital Electronics Lab Assignment 2

D flip-flop functionality was studied through a digital electronics lab assignment. The truth table for a D flip-flop was provided. A simulation was conducted where the D flip-flop output toggled between 1 and 0 depending on the D and clock input values. Proper enabling of power sources and a clock pulse of 1 were needed to obtain a precise graph of the simulation results.

Uploaded by

Sanjoy Pathak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DIGITAL ELECTRONICS LAB ASSIGNMENT (PC EE492)

NAME : SANJOY PATHAK (EE1 Y-74),SEM 4


OBJECTIVE: TO UNDERSTAND THE FUNCTIONALLITY OF D FLIP-FLOP.
TRUTH TABLE: (D FLIP-FLOP)

SIMULATION:
WHEN STARTING CLOCK PULSE BY CONNECTING VCC1 AND VCC2:
WHEN (D=1,CLK=1):

WHEN (D=0,CLK=1):
DISCUSSION: IN SIMULATION VCC1,VCC2 SHOULD BE ENABLED BEFORE
PERFORMING EXPERIMENT . CLOCK PULSE IS SET TO 1 FOR GETTING
PRECISE AND SIMPLE GRAPH OTHERWISE GRAPH WILL BE LONG.

You might also like