Scribd Logo
Upload

Welcome to Scribd!

  • 183 views

    Precommissioning Activities Reinstatement Checklist

    Uploaded by

    Yusuf
    This document is a reinstatement checklist for an oil project precommissioning activities. It contains 14 check points to verify tasks are completed for turning over a unit, subsystem, or package. These include draining lines, removing temporary items, installing permanent gaskets and bolts, checking valves, instruments, and ensuring welding and supports are installed. The final remarks section allows notes on the status of each check point.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Precommissioning Activities Reinstatement Checklist

    Uploaded by

    Yusuf
    183 views1 page
    This document is a reinstatement checklist for an oil project precommissioning activities. It contains 14 check points to verify tasks are completed for turning over a unit, subsystem, or package. These include draining lines, removing temporary items, installing permanent gaskets and bolts, checking valves, instruments, and ensuring welding and supports are installed. The final remarks section allows notes on the status of each check point.

    Original Title

    Re-Instatement Check List

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a reinstatement checklist for an oil project precommissioning activities. It contains 14 check points to verify tasks are completed for turning over a unit, subsystem, or package. These include draining lines, removing temporary items, installing permanent gaskets and bolts, checking valves, instruments, and ensuring welding and supports are installed. The final remarks section allows notes on the status of each check point.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    183 views1 page

    Precommissioning Activities Reinstatement Checklist

    Uploaded by

    Yusuf
    This document is a reinstatement checklist for an oil project precommissioning activities. It contains 14 check points to verify tasks are completed for turning over a unit, subsystem, or package. These include draining lines, removing temporary items, installing permanent gaskets and bolts, checking valves, instruments, and ensuring welding and supports are installed. The final remarks section allows notes on the status of each check point.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    Reinstatement Check list

    STATE COMPANY
    FOR OIL PROJECT PRECOMMISSIONING ACTIVITIES

    REINSTATEMENT CHECKLIST

    Unit No. System No.

    Sub-system No. Package No.

    Task No.
    NO Check Point COMMENTS

    1 Draining and air blowing of line is successfully completed and accepted YES □ NO □ N/A □

    All the temporary items, blinds, supports and spools installed for the purpose of
    2 YES □ NO □ N/A □
    testing is removed.
    All the flange joints which have been opened after test are fitted with new
    3 YES □ NO □ N/A □
    permanent service gasket and bolts.

    4 Vents and drain valves closed after draining, and provided end cap or blind flange. YES □ NO □ N/A □

    5 Wherever applicable vent / drain caps are seal welded and required NDE is done. YES □ NO □ N/A □

    All the process blinds, spades and spectacle blinds are correctly installed as
    6 YES □ NO □ N/A □
    indicated in P&ID.
    All the valves, Relief valves, check valves, orifice plate are installed and functioning
    7 YES □ NO □ N/A □
    properly.
    Wherever required extended spindles, chain wheels and locking devices installed
    8 YES □ NO □ N/A □
    for vales, and working properly.
    All the inline instruments, equipments, gauges and steam tracing / electric tracing
    9 YES □ NO □ N/A □
    are installed.
    Flow direction correct for strainers, traps, orifice plate, globe valves, control valves,
    10 YES □ NO □ N/A □
    check valves etc..

    11 Welding and NDE of Tie-in joints are completed and accepted. YES □ NO □ N/A □

    Provided all permanent pipe supports, anchors and guides. Cold setting done for
    12 YES □ NO □ N/A □
    Spring support.
    Painting/coating/insulation of line, including weld joints and damaged area is
    13 YES □ NO □ N/A □
    completed and accepted.

    14 Check for proper slope where required. YES □ NO □ N/A □

    Remarks

    CONSTRUCTION HDGSK JV QC EMPLOYER

    Name

    Position

    Signature

    Date
    Form No.: ITRF-PPI-0001-11

    You might also like