Scribd
Upload
4K views2 pages

CBE Tactic Hybrid Instructions WEB

The TACTIC hybrid sight is a compact, lightweight, and versatile sight. It features an adjustable elevation mounting system and windage adjustments. The sight can be converted for left-handed use and comes with interchangeable sight scales to suit different bow setups.

Uploaded by

Mario Gallardo Caballero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views2 pages

CBE Tactic Hybrid Instructions WEB

The TACTIC hybrid sight is a compact, lightweight, and versatile sight. It features an adjustable elevation mounting system and windage adjustments. The sight can be converted for left-handed use and comes with interchangeable sight scales to suit different bow setups.

Uploaded by

Mario Gallardo Caballero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TACTIC hybrid INSTRUCTIONS

Tactic series sights - from the name you trust in archery accessories -
delivers features even the most demanding bowhunters need in a compact,
light-weight, and versatile package.

1:A
1:C
1:B
1:G 1:e smart mounttm

1:H 1:f

1:f

1:A 1:d
1:H

MOUNTING YOUR SIGHT WINDAGE ADJUSTMENTS


Your Tactic Hybrid has an adjustable elevation mounting system which To gang adjust windage, loosen the windage lock knob (1:G) and turn
is offered with CBE’s exclusive Smart MountTM system. With the Smart the windage micro knob (2:A) until the housing is in the desired position.
MountTM system, you have three sets of hole options to mount your sight Tighten the windage lock knob when complete.
at the optimal elevation position. Mount your sight to the bow with the To achieve additional windage, the windage mount can be offset towards
two #10-24 X 5/8” screws provided. There are 2 #10-24 holes located on the scope housing. To do this, remove the 2 elevation gang adjust
the riser bracket (1:F) for quiver mounting if necessary. screws (1:A) using a 9/64” hex. Next, move the windage mount (2:B)
to the opposite side of the elevation frame (2:C) – see images below.
ELEVATION ADJUSTMENTS
Reinstall the (2) #8-32 elevation gang adjust screws from the opposite
To make elevation gang adjustments, loosen the (2) #8-32 elevation
side using a 9/64” hex.
gang adjust screws (1:A) using a 9/64” hex. Slide the sight housing
(1:B) to the desired position. Lock the (2) #8-32 elevation gang adjust
2:A
screws down when complete. NOTE: there are 5 mounting holes that can
be used to achieve optimal placement.
To use the hybrid elevation drive, loosen the elevation lock lever (1:D).
2:B
Move the hybrid drive to the desired position using the hybrid drive knob 2:C
(1:E). Lock the elevation lock lever when complete.

CONTINUED ON BACK
2ND AXIS LEVELING ADJUSTMENT
To adjust the 2nd axis on the Tactic Hybrid, loosen the 2 #8-32 screws
(1:H) connecting the windage body to the pin plate using a 9/32” hex.
Level the 2nd axis by rotating the housing until level and retighten the
screws. 3:A

SIGHT PIN ADJUSTMENT FLIP


Pins can be moved individually by loosening the #4-40 screw using a
3/32” hex and moving the pin to the desired location. Retighten the
3:B
screw when complete (3:A).

CONVERTING SIGHT FOR LEFT HANDED ARCHERS


To convert the Tactic Hybrid to left handed, simply remove the 4 screws
that connect the sight housing to the pin plate. Flip the housing and
reinstall the screws (3:B).

SIGHT SCALES
Sight scales are provided to suit most bow setups. First, install one of
the provided blank tapes on the hybrid drive knob. To choose the correct
4:a
sight scale, move the housing all the way up to the Rapid Stop position
(4:A) using the hybrid drive. Now, use the elevation gang adjust and
Smart Mount to set your floating pin. Make a mark on the blank tape
in line with the indicator (4:B). With the floating pin mark set, move to 4:B
60 yards and sight in using the same pin. Make a second mark on the 4:C

blank tape in line with the indicator.


Now, peel the blank tape off of the hybrid drive knob and match the
marks up with the tapes provided (for a 20 yard Rapid Stop, use the 20
yard mark, for a 40 yard Rapid Stop, use the 40 yard mark, etc.) (4:C).
Find a tape that has the same gap between floating pin mark and 60
yard mark as the marks that you created. Install the selected tape to
the hybrid drive knob while the sight is in the Rapid Stop position (4:A). 4:D

(NOTE: You may need to trim sight scale to proper length.) Move the
indicator to the mark on the sight scale corresponding with the Rapid
Stop yardage mark on the tape by loosening the #4-40 screw (4:D) with
a 3/32” hex and sliding the indicator to the correct location. Tighten
the indicator screw when completed.

THANK YOU FOR CHOOSING WARRANTY SERVICES:


IMPORTANT: In the unlikely event that you require service on your product,
CUSTOM BOW EQUIPMENT! please contact Customer Service at 1 (877) 503-5483. If necessary, our Customer
Service Agents will provide you with a Return Merchandise Authorization (RMA)
the outdoor group, llc number and instructions on how to ship the product(s) back. It’s important that you
1325 John Street, West Henrietta, NY 14586
contact a Customer Service Agent before returning any item. Please be sure to include
(877) 503-5483
your RMA number when returning an item, so that we can identify the return as yours.
www.custombowequipment.com Without the RMA, we will not be able to process your return, and your item will not be
returned to you.
LIABILITY DISCLAIMER
The Outdoor Group, LLC is not liable for any personal injury, death, or property damage
that may result from your use of this product. The user of this product assumes all risks of Patent Information
property damage or injury to yourself and others that may arise from its use. Use of this This product is covered by one or more patents. A complete list of Custom Bow Equipment
product binds the user to this agreement. patents can be found by visiting custombowequipment.com/pages/patents

You might also like