Aits 2021 FT Vii Jeea Paper 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 13

ALL INDIA TEST SERIES

FULL TEST – VII


JEE (Advanced)-2021
PAPER –1
TEST DATE-30-05-2021
Time Allotted: 3 Hours Maximum Marks: 198
General Instructions:

 The test consists of total 54 questions.


 Each subject (PCM) has 18 questions.
 This question paper contains Three Parts.
 Part-I is Physics, Part-II is Chemistry and Part-III is Mathematics.
 Each Part is further divided into Two Sections: Section-A & Section-C.
Section-A (01 – 06, 19 – 24, 37– 42) contains 18 multiple choice questions which have ONLY
ONE CORRECT ANSWER. Each question carries +3 marks for correct answer and –1 mark for
wrong answer.

Section-A (07 – 12, 25 – 30, 43 – 48) this section contains 18 multiple choice questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are)
correct answer(s).
For each question, choose the option(s) corresponding to (all) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen:
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen;
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen and
both of which are correct;
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is
a correct option;
Zero Marks : 0 If none of the options is chosen (i. e. the question is unanswered);
Negative Marks : 2 In all other cases.

Section-C (13 – 18, 31– 36, 49 – 54) contains 18 Numerical answer type questions with answer
XXXXX.XX and each question carries +4 marks for correct answer and 0 marks for wrong answer.

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021 2

Physics PART – I

SECTION – A
(One Options Correct Type)
This section contains 06 multiple choice questions. Each question has four choices (A), (B), (C) and
(D), out of which ONLY ONE option is correct.

1. Three identical uncharged metal spheres are at the vertices of an


equilateral triangle. One at a time, a small sphere is connected by a
conducting wire with a large metal sphere that is charged. The center of
the large sphere is in the straight line perpendicular to the plane of
equilateral triangle and passing through its centre (see figure). As a result,
the first small sphere acquires charge q1 and second charge q2  q2  q1  .
The charge that the third sphere q3 will acquire is:

 Assume >>R, >>r,d>>R, d>>r 


q12
(A)
q2
q22
(B)
q1
(C) q1q2
q1  q2
(D)
2
2. The electric flux passing through the cube for the given arrangement
of charges placed at the corners of the cube (as shown in the figure)
is:
1
(A) 
2 0
1
(B) 
2 0
1
(C) 
0
1
(D) 
0

3. Two parallel disks each having radius R are separated by a distance  .


The surface charge densities are  and  . The electric field at
point P, a large distance r along the axis of the disks is:
 R 2
(A)
 0r 3
2 R 2 
(B)
 0r 3

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
3 AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021

 R2
(C)
4 0 r 3
 R2
(D)
2 0 r 3

4. The maximum power delivered to resistance R is:


(A) 0.2W
(B) 0.4W
(C) 0.8W
(D) 0.16W

5. Choose the correct statement for the given capacitor arrangement. (All the
6 capacitors are of same capacitance).
(A) If a battery is connected across AB, all 6 capacitors get charged.
(B) If a battery is connected across AC, all 6 capacitors get charged.
(C) If a battery is connected across AD, all 6 capacitors get charged.
(D) It is not possible to charge all the 6 capacitors using single source.

6. The radius of curvature of the left and right surface of the concave lens are 10cm and 15 cm
respectively. The radius of curvature of the mirror is 15 cm. (Consider direction of incident light
as positive)

(A) Equivalent focal length of the combination is 36cm


(B) Equivalent focal length of the combination is 36cm
(C) The system behaves like a concave mirror.
(D) The system behaves like a convex mirror.

(One or More than one correct type)


This section contains 06 multiple choice questions. Each question has FOUR options (A), (B), (C) and
(D). ONE OR MORE THAN ONE of these four options is(are) correct.

7. A circular conducting loop of radius r0 and having resistance per unit


length  as shown in the figure is placed in a magnetic field B which is
constant in space and time. The ends of the loop are crossed and pulled
in opposite directions with a velocity v such that the loop always
remains circular and the radius of the loop goes on decreasing, then

(A) Radius of the loop changes with r  r0  vt / 


(B) EMF induced in the loop as a function of time is e  2 Bv  r0  vt /  
Bv
(C) Current induced in the loop is I=
2πλ

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021 4

Bv
(D) Current induced in the loop is I=
πλ
8. A large, horizontal disk of radius R, shown below, starts to rotate
from rest with an angular acceleration of  . The rotation is about a
vertical axis through the centre of disk. The disk contains a narrow
channel of length 2R and rectangular cross-section. Gravity acts in
the vertical direction with an acceleration of g. There is a small
rectangular puck that just fits easily in the aforementioned channel,
as shown. The puck is situated a distance r from the axis of
rotation.

(A) If the sides of the channel are frictionless but the bottom of the channel has a static

coefficient of friction  , then puck begins to slide at t

g
(B) In case mentioned in option (A), t
r 2
(C) Now, instead, the situation is that the bottom of the channel is frictionless but the walls
g
have a static coefficient of friction  . Now puck begins to slide at t
r 2

(D) In case mentioned in option (C), t

9. A horizontal square platform of mass m and side a is free to rotate
about a vertical axis passing through its centre O. The platform is
stationary and a person of the same mass (m) as the platform is
standing on it at point A. The person now starts walking along the edge
from A to B (see figure). The speed v of the person with respect to the
platform is constant. Taking v = 5 m/s and a = 1m.

(A) Angular velocity of platform when the person is at A is 6 rad/s.


(B) Angular velocity of platform increases first and then decreases again as it reaches B.
(C) Angular velocity of platform decreases first and then increases again as it reaches B.
(D) Angular velocity of platform remains constant as the person goes from A to B.

10. The body is rotated in the vertical plane by means of a thread of


length  with minimum possible speed. At the highest point B the
thread breaks and the body moves under gravity and strikes at C.
Then:
(A) The horizontal range AC is 2
(B) The horizontal range AC is 2
2
(C) Tangential acceleration of the body at point C is g
5
1
(D) Tangential acceleration of the body at point C will be g
5

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
5 AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021

11. Here inductor is connected to a resistor as shown. When a magnet


is moved towards the coil with a constant speed till it comes out of
coil completely. As seen by observer looking at the rectangular
loop as shown.
(A) Current first flows clockwise and then anticlockwise in loop.
(B) Current first flows anticlockwise and then clockwise in loop.
(C) Magnet first experiences a repulsive force and then an attractive force.
d d
(D) When rate of change of flux due to magnet is , current in coil is
dt Rdt
12. A fluid of density  is rotated with a certain angular velocity in a cylindrical
vessel as shown:
2gh
(A) The angular velocity is ω=
R2
4gh
(B) The angular velocity is ω=
R2
16 gh 2 R 2
(C) The kinetic energy of fluid is
15
5 gh 2 R 2
(D) The kinetic energy of fluid is
6
SECTION – C
(Numerical Answer Type)
This section contains 06 questions. The answer to each question is a NUMERICAL VALUE. For each
question, enter the correct numerical value (in decimal notation, truncated/rounded‐off to the second
decimal place; e.g. XXXXX.XX).
13. A point like sound source emits sound in all direction uniformly. An observer who is at a distance
8
of 50 m from the source detects sound of intensity 10 watt/m 2 . If the bulk modulus of air is
1.6×105 N/m 2 and velocity of sound is 340 m/s. Find pressure amplitude at the position of
observer. If your answer is x×10 3 N/m 2 fill value of [x]_____
14. When the voltage applied to an X-ray tube increased from V1  15.5 KV to V2  31KV , the
wavelength interval between the K a line and the short wavelength cut-off of the continuous X-ray
spectrum increases by a factor of 1.3. Find the atomic number of the element of the target. If
N
your answer is N fill value of . (Take: he = 1240 eV and R = 1×10 7/m)
13
15. A 10 kg block B rests on smooth rollers of negligible mass and
is in contact with a 2.0kg solid cylinder of the radius 0.1m
as shown. The rollers ensure that there is no friction between
B and the ground A below B. It is know that k   s  0.5
between B and C as well as between C and ground A. Find
the magnitude of the horizontal force P (in N) for which the
cylinder will roll with an angular acceleration of 20 rad/s 2 on
P
ground A without slipping. Fill on OMR sheet.
16

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021 6

16. A vernier calliper has no zero error, one main scale division = 1 mm and 9 main scale division =
10 vernier scale divisions. A spring is held between jaws without exerting force on jaws. Main
scale reading is 3.4cm and 5th vernier scale division coincides with a main scale division. When
jaws are pressed by force of 10 N on both sides, main scale reading remains 3.4cm , but 1st
division of vernier scale coincides with a main scale division. Now spring is removed, cut into two
pieces and when inserted between jaws without any force, main scale reading =1.1cm and 5th
vernier scale division coincides with a main scale. If we apply force of 30 N on both the jaws,
main scale reading remains 1.1cm and x vernier scale division coincides with a main scale
division. Fill x in OMR sheet.

17. A heavy mass is hung from ceiling as shown. Both wires are
identical. A pulse is produced in both the strings simultaneously
at the point of contact with mass. If it reaches the ceiling in
3 3  103 sec for string on the right, in what time will it reach the
3
ceiling for the left string (in 10 sec).

18. For the inversion of the image we often use a Dove prism (see
figure), representing truncated regular rectangular isosceles
prism. Find approximately the length of side AB (in cm) at
which the beam of light falling on side AD will come out of side
BC completely. The height of the trapezium ADCB is equal
to h  1.05cm . Refractive index of the prism is 1.41 . Angle
A and B are 45 each. (Given: 2  1.41 , 3  1.73 )

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
7 AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021

Chemistry PART – II

SECTION – A
(One Options Correct Type)
This section contains 06 multiple choice questions. Each question has four choices (A), (B), (C) and
(D), out of which ONLY ONE option is correct.

19. Identify the final product 'Z'


O
 i  NaH / THF KOH / H O /  C H CHO / OH 
H 5C 6 C CH2 COOC2H5 
 ii  CH 3COCl  X 
2
 Y  CO2  C2 H 5OH 
6 5

Z

(A) CH3 (B) COOH


C6H5 CH C C6H5 CH C
CH3 COOH

(C) COCH3 (D) C6 H5  CH  CH  COCH3


C6H5 CH C
COCH3

20. A chromatography column, packed with silica gel as stationary phase, was used to separate a
mixture of compounds consisting of (A) benzanilide (B) aniline and (C) acetophenone. When the
column is eluted with a mixture of solvents, hexane: ethylacelate (20:80), the sequence of
obtained compounds is:
(A) (A), (B) and (C)
(B) (B), (A) and C
(C) (C), (A) and (B)
(D) (B), (C) and A

21. Calculate G° for the following cell reaction


Zn  s   Ag 2O  s   H 2O  I   Zn 2  aq   2 Ag  s   2OH   aq 
0
E Ag 
/ Ag
 0.80V and EZn
0
2
/ Zn
 0.76V , F  96500
(Given: K P of AgOH=2×10 8 )
(A) 305kJ / mol
(B) 212kJ / mol
(C) 305kJ / mol
(D) 301kJ / mol

22. The coagulation of 10 cm3 of gold solution by 1 ml 10% NaCl solution is completely prevented by
addition of 0.25 g of starch to it. The gold number of starch is:
(A) 0.025
(B) 0.25
(C) 2.5
(D) 250

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021 8

23. In the given reaction

 A     B   B  will be:



HS OH 
TsCl
Pyridine
OH

(A) (B)
HS OTs -S OH

(C) S (D) O

24. A red solid is insoluble in water. However it becomes soluble if some KI is added to water.
Heating the red solid in a test tube results in liberation of some violet coloured fumes and droplets
of a metal appear on the cooler parts of the test tube. The red solid is:
(A) HgI 2
(B) HgO
(C) Pb3O 4
(D)  NH 4 2 Cr2O7
(One or More than one correct type)
This section contains 06 multiple choice questions. Each question has FOUR options (A), (B), (C) and
(D). ONE OR MORE THAN ONE of these four options is(are) correct.

25. Consider following conversions


O
CH3
X

Y CH2

Where X and Y are reagent or set of reagents. Which of the following statement(s) is/are correct?
(A) Na/liq. NH3 can be used as Y
(B) H 2 /Pd.BaSO 4 can be used as Y
(C) NaNH 2 /Me-1/1% HgSO 4 can be used as X
(D) KOH/Me-1/1% HgSO 4 , dil H 2SO 4 can be used as X

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
9 AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021

26. Which is/are correct statements?


(A) H3C CH3 (B) H3C CH3
H C C CH3 
CH3OH

 H C C CH3 
NaOH

H2SO4 CH3OH
O O

nucleophile attacks here when nucleophile attacks here


epoxy linkage is cleaved
(C) O This is only affected in (D) O
reduction to 2o alcohol: 
 H  O  R 
H

R OH

NaBH4
CH3OH


O
these bonds are affected in esterification

27. 3HCHO  CH3 CHO  NaOH


A
A formed can:
(A) reduce Tollen’s reagent
(B) give Cannizzaro reaction
(C) react with Na
(D) give green colour with Cr2 O 72  / H

28. Which statements(s) is/ are correct


(A) Among transition metals only Zn, Cd, and Hg have one or more typical metallic structures
at normal temperatures.
(B) Among transition metals only V, Nb, Ta, Mo and W have bcc structures and all other can
have different Cr, Mo and W. (in their respective series).
(C) maximum m.pt in transition metal (3d series) series are of Cr, Mo and W. (in their
respective series)
(D) The m.pt of corresponding elements generally follow order 3d series < 4d series < 5d
series

29. Find which is/are correct.


(A) Amides R 2 NCOR are much more nucleophilic on O than they are on N.
(B) Esters are much less electrophilic at C than Ketones.
(C) Acyl chlorides RCOCl are much more acidic than esters
(D) H3C O O is more acidic than O

H3 C

OMe

OAC

30. One mole triatomic vapours of an unknown substance effuses 4/3 times faster than 1 mole O 2
under same conditions. If the density of unknown vapours at pressure P and temperature T is d,
which of the following holds true for the unknown substance?
(A) d N.T.P.  0.8035 g / l
(B) Z  atomic number  =6
(C) Z  compress ibility factor  =18P/dRT
(D) Vapour density=9

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021 10

SECTION – C
(Numerical Answer Type)
This section contains 06 questions. The answer to each question is a NUMERICAL VALUE. For each
question, enter the correct numerical value (in decimal notation, truncated/rounded‐off to the second
decimal place; e.g. XXXXX.XX).

31. In the following compound some undergo disproportionation with conc. NaOH and some do not
give disproportionation with conc. NaOH:
F2 ,Cl 2 ,Br2 ,N 2 , CH 3COCH 3 , CCl3CHO,  C 6 H 5 3 CCHO, P4 , I 2 ,  CH 3 2 CHCHO, HCHO.
'x' are the number of compound which undergo disproportionation and 'y' are the number of
compound which do not undergo disproportionation then x/y is:

32. The standard Gibbs free energy change of the reaction shown below is 2.7 kJ.mol 1 .
Sn  s   Pb 2   Sn 2   Pb  s 
Given that E
0
 Pb 2
/ Pb   0.126V, Find the value of magnitude of E 0  Sn 2 / Sn 

33. Calculate the molar solubility of AgBr in 0.1 M Na2S2O3 (aq.) solution. K sp of AgBr
=5×1013 and K f  Ag  S2O3 2   5 1013 . Give S if molar solubility is S×101 _____
3
 

34. Compute the percentage void space per unit volume of unit cell in zinc sulphide structure.

35. 10g of NH 4 Cl (mol. Weight = 53.5) when dissolved in 1000 g of water lowered the freezing point
by 0.637°C . Calculate the degree of hydrolysis of the salt if its degree of dissociation is 0.75 .
1
The molal depression constant of water is 1.86 kg mol K .
ROUND OFF YOUR ANSWER CORRECT UPTO 2 DECIMAL PLACES

36. The vapour pressure of a certain liquid is given by the equation:


313.7
log10 P  3.54595   1.40655log10 T where P is the vapour pressure in mm and
T
T  Kelvin temperature. Determine the molar latent heat of vaporisation as a function of
temperature. Calculate its value at 80K .

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
11 AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021

Mathematics PART – III

SECTION – A
(One Options Correct Type)
This section contains 06 multiple choice questions. Each question has four choices (A), (B), (C) and
(D), out of which ONLY ONE option is correct.

 /2
37. Consider a real valued continuous function f such that f  x   sin x    sin x  t f  t   dt .
 /2
If

maximum value of the function is equal to k   1 , k  N , then the value of k is:


(A) 1
(B) 2
(C) 3
(D) 4

  sin x  sin 2 x  sin 3x    cos x  cos 2 x  cos 3 x  dx equals:


2 2
38.

2 /3

 
(A)  3 
 3
 
(B)   3
3 
5
(C)  3
3
5
(D) 3
3

39. Let f  x   cos


1
x  cos 1 x  cos 1 x . If f  x   k has one distinct solution then range of k
is:
 
(A) 0, 2 
(B) 0,  
 3 
(C) 0, 2 
(D) 0, 2 
40. Let Tn  3n  2 and T 'm  7 m  2 be two sequences each having 2004 terms. The number of
common terms to the two sequences is:
(A) 283
(B) 284
(C) 285
(D) 286

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021 12

41. In an equilateral triangle R : r : r1 is equal to


(A) 1:1:1
(B) 1:2:3
(C) 2:1:3
(D) 3:2:4

42. If the radius of in-circle and radii of ex-circles of a triangle are consecutive of a geometric
progression then the largest angle of the triangle will be:
(A) 60
(B) 90
(C) 120
(D) None of these

(One or More than one correct type)


This section contains 06 multiple choice questions. Each question has FOUR options (A), (B), (C) and
(D). ONE OR MORE THAN ONE of these four options is(are) correct.

43. If the cubic equation x3  x  1  0 has roots  ,  ,  , then:


(A) 2  2  2  2
(B)  3   3   3  3
(C) 4  4  4  2
(D)  5   5   5  5

 2 1 3
44.
 
Let A  1 1 2 and A   A   A   I , then which of the following holds good?
1 2
 
3 1 1
 
(A)    1
(B) 3        10
(C) 8       11
(D) 8      3

3x 5  2x 3 , x  Rational
45. f(x) =  , then
0 , x  Irrational
(A) f(x) is continuous exactly at one point
(B) f(x) is discontinuous  x  R
(C) f(x) is non-differentiable  x  R
(D) f(x) is differentiable exactly at one point
             
46.       
If vector a,b,c are linearly independent and d  b   c  a   d  c  a  b  d  a  b  c  r   
 
(A) r is collinear with d
  
(B) d  a  r  = 0
       2 
       
(C)
     
If c  m  0, m  c ,  b  c  b  m    c  m    c   b d c  d , where m 
r
  
2 a b c 

   
(D) r is a linear combination of a, b and c

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com
13 AITS-FT-VII (Paper-1)-PCM-JEE (Advanced)/2021

47. The value of the integral e


sin2 x
 cos x  cos x  sinx dx is
3

(A)
1 sin2 x
2
e 
3  sin2 x  c 
2  1 
(B) e sin x  1  cos2 x   c
 2 
3 cos 
2
(C) esin x 2
x  2 sin2 x  c

 2cos x  c
2
(D) esin x 2
x  3 sin2

48. Let ABC be a triangle with fixed base BC = 1 and vertex ‘A’ is variable. If one base angle is
double of the other base angle then locus of A is a hyperbola
(A) Whose eccentricity is 4
(B) Whose L.R is 4
(C) Whose eccentricity is 2
(D) Whose L.R. is 2.

SECTION – C
(Numerical Answer Type)
This section contains 06 questions. The answer to each question is a NUMERICAL VALUE. For each
question, enter the correct numerical value (in decimal notation, truncated/rounded‐off to the second
decimal place; e.g. XXXXX.XX).

49. If a, b, c be the sides of a triangle ABC with right angle at C. The medians AD and BE have
slopes 1 and 2 respectively. Then ab = kc2 where 36k equals __________

50. The greatest value of the function f  x   2.3


3 x  32 x
.4  2.3x in the interval  1,1 is_____

51. Let n be a positive integer. If the number of integers in the domain of the function
f  x   ln  1  x  x  n   is 2n  11, then cot 1  cot n  is equal to:  Use π=3.14

1 
52. If  is a real root of the equation x3  3x  tan 2  0 then the value of tan
1
  tan 1  is
 2
equal to:  Use π=3.14
x y z
53. The plane    1 intersect x-axis, y-axis, z-axis at A, B, C respectively. If the distance
1 2 3
between origin and orthocentre of ΔABC is equal to k , then the value of 'k' is_____

12 22 32 500 2
54. Let S=    .....  . Then the total number of divisions of  S  is____
1.3 3.5 5.7 999.1001
[where [.] denotes GIF.]

Ltd., FIITJEE House, 29-A, Kalu Sarai, Sarvapriya Vihar, New Delhi -110016, Ph 46106000, 26569493, Fax 26513942
website: www.fiitjee.com

You might also like