Scribd
Upload
995 views1 page

Material Description: HR Coil Is 10748 Gr2 Sialk

This document is a test certificate from Steel Authority of India Limited for a shipment of hot rolled steel strip to be used for welded pipes and tubes. It certifies that the material meets the chemical composition, mechanical, and physical property requirements of standard IS 10748:2004. The certificate provides details on the order, material description, tests conducted, and results that confirm the steel meets the grade specification.

Uploaded by

TARUNKUMAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
995 views1 page

Material Description: HR Coil Is 10748 Gr2 Sialk

This document is a test certificate from Steel Authority of India Limited for a shipment of hot rolled steel strip to be used for welded pipes and tubes. It certifies that the material meets the chemical composition, mechanical, and physical property requirements of standard IS 10748:2004. The certificate provides details on the order, material description, tests conducted, and results that confirm the steel meets the grade specification.

Uploaded by

TARUNKUMAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STEEL AUTHORITY OF INDIA LIMITED IS:10748

BOKARO STEEL PLANT


BOKARO STEEL CITY - 827001, JHARKHAND, INDIA
Test Certificate
HOT ROLLED STEEL STRIP
FOR WELDED PIPES AND TUBES
MATERIAL DESCRIPTION : HR COIL IS 10748 Gr2 SiAlK MILL : HSM TO
TEST CERTIFICATE NO. : 696596 DATE : 17.07.2020 BM BSO GHAZIABAD
SHIPPING ADVICE NO. : 80838380 DATE : 17.07.2020 GAURANG PRODUCTS PVT LTD
WAGON NO. : ECR11552 SOUTH OF GT RD, BULANDSHAHAR RD 201009
GHAZIABAD
We certify that the material described below fully confirms to 10748:2004. Chemical composition and Mechanical / Physical properties
of the product as tested in accordance with the scheme of testing and inspection contained in BIS Certification Marks License No:
CM/L-1327744 are as indicated against each Coil / Cast No or Order No. The Material supplied conforms to the standard rolling /
dimensional and weight tolerances.
(Please refer to 10748:2004 for details of specification requirements)

Chemical Analysis, Mechanical Properties, Specifications & Other Information


ITEM CAST NO. BATCH NO. SALES ORDER & SIZE TON C% Mn% P% S % Si% Al% GRADE
NO. (MM) (0.12 (0.60 (0.04 (0.04 (0.03 (0.01
T X W X L MAX) MAX) MAX) MAX) MIN) MIN)
1 2054075 N699830 1200577315 19.770 0.08 0.27 0.025 0.007 0.089 0.059 IS 10748 Gr2 SiAlK

2.500X1,060
2 2055307 N700459 1200577313 15.810 0.08 0.25 0.025 0.004 0.105 0.032 IS 10748 Gr2 SiAlK

2.100X1,025
3 2055307 N700458 1200577313 15.800 0.08 0.25 0.025 0.004 0.105 0.032 IS 10748 Gr2 SiAlK

2.100X1,025
4 2055307 N700457 1200577313 15.730 0.08 0.25 0.025 0.004 0.105 0.032 IS 10748 Gr2 SiAlK

2.100X1,025
TOTAL TONNAGE : 67.11

Remarks:

LEGEND (where applicable): MAE = Micro Alloying Elements Hard = Hardness THIRD PARTY / DDQA AUTHORISED SIGNATORY
One Mpa=1 Nsq.mm=0.102 kg/sq.mm GC = Galvanised Corrugated IMP = Impact Value (full size)
EL = Elongation GPD = Galvanised Plain Deep Drawing ST-RL=Stretched & Roller Levelled
YS = Yield Stress TXWX L = ThicknessXWidthXLength COR-OD=Corrugated Ordinary
UTS = Ultimate Tensile Strength D.DRW = Deep Drawing R = BOF-SM-HSM (INGOT) FOR SENIOR MANAGER (MTL)
CE = Carbon Equivalent CUP = Cupping Value N = BOF-LF-CCS-HSM RESEARCH & CONTROL LABORATORY

You might also like