P004〜43.2002A 02.10.

7 9:12 AM ページ 18

FUJIFILM
PROFESSIONAL DATA GUIDE

1-3. FILM IDENTIFICATION EDGE MARKINGS

AND CODE NOTCHES
FUJICHROME and FUJICOLOR film types are distinguishable by • 120 Size: RVP, RDPIII, RAP, RHPIII, RTP II
either their edge markings or code notches. 220 Size: RVP, RDPIII, RAP
• Roll films: Edge markings
Film Type Emulsion Number
• Sheet films: Code notches
RVP 501

Roll Film Edge Markings RDPIII 001

Edge markings are used for identifying processed film. In addition to RAP 601

edge markings, "DX" codes are also seen on 135-size color negatives. RHPIII 201

RTPII 701

Code patterns are designated for each film type.
The correlation between film type, edge markings, and "DX" and frame
number bar codes is indicated below. FUJI RAP ABCDEF-GHIJ FUJI RAP RAP 601

■ FUJICHROME Films
• 135 Size: RVP, RDPIII, RAP, RHPIII, RTP II, RA, RM, RH
Film Type Emulsion Number
RVP 501

RDPIII 001

RAP 601

RHPIII 201

RTPII 701

RA 651

RM 951

RH 251

RAP 1 RAP 2 RAP 3 RAP 4

Film Type Frame Number 1 through 19 for 120 size

1 FUJI RAP 2 RAP-601 3 FUJI RAP 4 FUJI
1 through 39 for 220 size
■ FUJICOLOR Films
• 135 Size: SUPERIA REALA*, SUPERIA 100*, SUPERIA 200*, SUPERIA X-TRA 400*,
SUPERIA X-TRA 800*, SUPERIA 1600*, NPS*, NPC*, NEW NPH*, NPZ*,
PRESS 400/800/1600*
Film Type *Abbreviated
Production Number Designation
(Emulsion Number)
1 36 1A 2 36 2A 3 36 3A 4 36 4A
SUPERIA REALA* REALA J51 and above
Number of Exposures 24 or 36 Frame Number SUPERIA 100* S-100 E51 and above
SUPERIA 200* S-200 F51 and above
SUPERIA X-TRA 400* S-400 G01 and above
• 35 mm Long Roll: RVP, RDPIII, RAP, RHPIII, RTP II, CDUII SUPERIA X-TRA 800* S-800 L01 and above
Film Type Emulsion Number SUPERIA 1600* 1600 R01 and above
NPS 160* 160 501 and above
RVP 501
NPC 160* 160 901 and above
RDPIII 001
NEW NPH 400* 400 101 and above
RAP Number
601
NPZ 800* 800 001 and above of Exposures
RHPIII 201
PRESS 400* P-400 G01 and above
RTPII 701
Frame Number PRESS 800* P-800 L01 and above 12, 24 or 36
CDUII 301
PRESS 1600* P-1600 R01 and above

2 FUJI RAP 3 RAP-601 4 FUJI RAP 5 FUJI RAP 400 00A 36 0 S-400 0A CH-7 1 S-400 1A FUJI 2 S-400 2A G01 3

2 2A 3 3A 4 4A 5 5A 00A 0 0A 1 1A 2 2A 3

Frame Number Half-frame number preceded by outlined arrow and followed by A.

1 through 43 DX Bar Code Frame Number
1 8 1 9
P004〜43.2002A 02.10.7 9:12 AM ページ 20

FUJIFILM
PROFESSIONAL DATA GUIDE

• 120 Size: NPS, NPC, NPL, NEW NPH, NPZ, SUPERIA REALA, Sheet Film Code Notches and Emulsion Numbers
SUPERIA 100, SUPERIA X-TRA 400 The code notches used in FUJICHROME and FUJICOLOR films serve
220 Size: NPS, NPC, NPH, NPZ, SUPERIA REALA two purposes.
110 Size: SUPERIA 200 (1) They enable photographers and laboratory personnel to distinguish
films by touch and shape.
Film Type Production Number (2) They confirm emulsion surface position when loading film holders.
(Emulsion Number)
It can be ascertained that the emulsion surface is facing upward
NPS160 501
when the code notch is located at the upper right-hand corner of a
NPC160 901
vertical sheet.
NPL160 601

NEW NPH 400 101

NPZ 800 001
Film Designation Code Notch/Emulsion Number
REALA J01 and above
S-100 S01 and above
S-200 951 and above
S-400 FUJICHROME Velvia
V51 and above for Professionals [RVP]
501

FUJI 100 FUJI 100 100 S01 FUJI 100

FUJICHROME PROVIA
100 F Professional [RDP III]
001

FUJICHROME ASTIA
100 Professional [RAP]
601

100 1 100 2 100 3 100 4 100 5

FUJICHROME 64T TYPEII
Professional [RTP II]
Frame Number Film Type 701

1 through 19 for 120 size
1 through 39 for 220 size
FUJICOLOR PORTRAIT FILM
NPS 160 PROFESSIONAL [NPS]
501

FUJICOLOR NPL
160 PROFESSIONAL [NPL]
601

FUJICHROME
DUPLICATING FILM
CDU TYPE II [CDU II]
301

FUJICOLOR
INTERNEGATIVE FILM [IT-N]
801

2 0 2 1