Dongguan Daly Electronics Co.,Ltd: Confirmation

Dongguan Daly Electronics Co.
,Ltd
Product Specification Confirmation
Product Model：DL-24B-L20S100ATJ-MM00
Customer Name：
Customer P/N：
Product Name：Li-ion 20s72V100A Common port
Version:
Company P/N：
Sample send date：
Confirmation
Verified Approved Operation
Customer Acknowledgement
Remarks：
Sign: Date：
1
Model DL-24B-L20S100ATJ-MM00 P/N
Note：
1. After receiving the prototype confirmation, please return it in time. There is no return and problem feedback
within 7 days. Our default customer test is qualified;
The picture in the book is a general-purpose model picture, which may be different from the sample delivery
machine. This specification book reaches the final interpretation right of Lithium Electronics.
2. Before the customer batches, please sign and return in the specification, and explain the detailed function
description.
1．Product Summary：
 Adopt foreign premium IC in class A protection.
 Use professional high current trace design and process to withstand large current
surge.
 Complete overcharge, over discharge, over current, short circuit function.
2.Electrical Parameters:
Description Specification Unite Remarks
Continue discharge current 100 A

Discharge
Sparkle current 300 A
Charge voltage 84 V
Charge
Charge current 100（MAX） A
Over charge detect voltage 4.25±0.05 V
Over charge protection over charge protection delay 0.5 S
over charge release voltage 4.19±0.05 V
Balance detect Voltage / V

Balance
Balance release voltage / V
Balance current / mA
Over discharge detect voltage 2.8±0.1 V

Over discharge
Over discharge detect delay 20 mS
protection
Over discharge release voltage 2.8±0.1 V
Over current detect voltage /

Over current protection
Over current detect delay 100 MS
2 Industrial Zone, Tutang Village, Changping Town, Dongguan

Address：Building A, 2nd District, Chengxing Industrial Park, No.1
City TEL：0769-82822953
Over current protection current 300±50 A as required

Over current protection release
Off load
condition
Short circuit of
Short Circuit protection condition
external load
Short Circuit ofext load short
Short circuit detect delay 250 uS
protection
Short circuit protection release
Off load
condition
Temp Protect No
Main Circuit Conduct Inner
Inner Resistance ≤20 mΩ
resistance
Working current ≤100 uA
Self Consumption Sleeping current(when in
≤20 uA
discharge)
Working Temp Temp range -20/+70 ℃
3. BMS wiring
(1). Product picture
(2) . Wiring diagram

City TEL：0769-82822953
(3).Wiring operation
（1）First connect the B-line of the protection board to the total negative pole of the battery pack;
（2）The cable starts from the thin black line connecting B-, the second line connects the positive
City TEL：0769-82822953
pole of the first string of batteries, and the next string is connected in turn.
The positive pole of the pool; then insert the cable into the protection board;
(3) After the wiring is completed, measure whether the battery B+, B-voltage and P+,
P-voltage values are the same, the same, that is, the protection board works positively.otherwise
please follow the above re-operation;
(4) When removing the protection board, first pull out the cable (if there are two cables, pull
the high-voltage cable first, then pull the low-voltage cable), then remove Power line B-.
4.Warranty
All our produced Lithium battery BMS, we guarantee 3 years warranty in quality, if the damage is
caused by human improper operation, we will conduct repair with charge
5.Attention Items
1.Lithium batery BMS with different voltage platform can not be used mutaully, eg., Life Po4 BMS
can not be used for Li-ion battery.
2.In utilization, please to make sure to Follow up the designed parameter and utilization conditions.
3.Charge and discharge current can not be higher than the quoted current value in specification.
4.Please to utilize the BMS in the the regulated working temperature range, and make sure of the
well heat dissipation environment.
5.No self taking off and change parts in BMS.
6.Our product has the function of waterproof, but still suggest avoid of long time water immersion.
7.We conduct Anode Oxidation process in BMS dissipation plate, but when the Oxidation layer
destroid, it stll may electricity conductive, it is stll suggest to avoid Dissipation plate contact with
Cell and Nickel band.
8.If the protection board is abnormal, please stop using it, and then solve the problem and use it
again;
9.Do not use two protective plates in series or in parallel.

City TEL：0769-82822953
NOTE：
Our products undergo strict factory inspection tests, but because the environment used by customers
is different (especially at high temperatures,
Ultra-low temperature, under the sun, etc.), it is inevitable that there will be a protection board
failure, so customers need to be friends when choosing and using the protection board.
Use in a good environment, and choose a certain amount of protection board.

City TEL：0769-82822953

Dongguan Daly Electronics Co.,Ltd: Confirmation

Uploaded by

Copyright:

Available Formats

Dongguan Daly Electronics Co.,Ltd: Confirmation

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dongguan Daly Electronics Co.,Ltd: Confirmation

Uploaded by

Copyright:

Available Formats

Dongguan Daly Electronics Co.

Product Specification Confirmation

 Complete overcharge, over discharge, over current, short circuit function.

Continue discharge current 100 A

Over charge detect voltage 4.25±0.05 V

Over charge protection over charge protection delay 0.5 S

over charge release voltage 4.19±0.05 V

Balance detect Voltage / V

Over discharge detect voltage 2.8±0.1 V

Over current detect voltage /

2 Industrial Zone, Tutang Village, Changping Town, Dongguan

Over current protection current 300±50 A as required

Working Temp Temp range -20/+70 ℃

(1). Product picture

(2) . Wiring diagram

3 Industrial Zone, Tutang Village, Changping Town, Dongguan

can not be used for Li-ion battery.

well heat dissipation environment.

5.No self taking off and change parts in BMS.

Cell and Nickel band.

9.Do not use two protective plates in series or in parallel.

5 Industrial Zone, Tutang Village, Changping Town, Dongguan

6 Industrial Zone, Tutang Village, Changping Town, Dongguan

You might also like