Scribd
Upload
3K views1 page

SOP Vehicle Movement

The standard operating procedure has 5 steps: 1) Security logs the vehicle entry using an app. 2) The vehicle is weighed to calculate load. 3) Staff informs the guard of company and warehouse details. 4) The guard instructs the driver to park and wait their turn. 5) Loading and unloading follows FIFO with no fixed times.

Uploaded by

Lalitkumar Tayade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views1 page

SOP Vehicle Movement

The standard operating procedure has 5 steps: 1) Security logs the vehicle entry using an app. 2) The vehicle is weighed to calculate load. 3) Staff informs the guard of company and warehouse details. 4) The guard instructs the driver to park and wait their turn. 5) Loading and unloading follows FIFO with no fixed times.

Uploaded by

Lalitkumar Tayade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

STANDARD OPERATING PROCEDURE FOR LOADING, UNLOADING AND

VEHICLE MOVEMENT

1. Vehicle enters the premises and the entry is done on myGate app by the
security.
2. Vehicle drives up to the weigh bridge for calculating the load of the
vehicle. Guard shall escort the vehicle and note the details. Alternatively,
we need to install a digital LED board at the security to facilitate this
entry.
3. Staff present at the weigh bridge shall inform the guard the details of
company as well as the warehouse details for which the vehicle has
come for loading or unloading.
4. Guard will then instruct the driver to get the vehicle parked at our
parking and wait for their turn.
5. There shall not be any fixed time for loading or unloading. FIFO has to be
followed.

You might also like