Acoples Lovejoy CS-LS (Jaw)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

JAW IN-SHEAR TYPE COUPLING

JAW IN-SHEAR PERFORMANCE DATA


Spider is non-fail-safe and thus acts as a fuse to prevent equipment damage in the event of torque
overloads. It is radially removable, meaning that neither hub (or driver/driven equipment) has to be
moved to make replacement of the spider. This saves time and money in maintenance costs.
The retaining ring which encloses the In-Shear Spider has small pins which simply slide through
grooves in the perimeter of the spider and twist-lock into place. It will not work its way loose and
since there are no fasteners involved, maintenance/removal of the spider takes only a few minutes.
It uses the standard L-Type and C-Type Jaw Coupling hubs. Existing applications using in-
compression spiders can simply be retrofitted with the new In-Shear Spider if the features are
beneficial. The Jaw In-Shear Spider is made from Urethane. The In-Shear coupling has different
power ratings to the standard jaw coupling and also uses different service factors, please contact
Naismith Engineering.

Normal
Power at Nominal Maximum
Part No. Max Bore 100 RPM Torque Speed General specifications of the Lovejoy Jaw In-Shear
kW (Nm) (RPM) Coupling are:-
• 2º angular misalignment capability
LS095 28.6 0.398 38.0 9200
• 0.7mm - 1.2mm parallel misalignment capability
LS100 35.0 0.660 63.0 7700 • 50D shore Urethane material, max temperature of 93ºC (200ºF)
LS110 42.0 1.288 123.0 5900 • Torsional wind-up of 5º at full load
LS150 48.0 2.147 205.0 5200 • Retaining ring is made from #347 cast stainless steel
• Can be used with SS-type Stainless Steel jaw coupling hubs
LS190 55.0 3.455 330.0 4300
• Can be used with AL-type aluminium jaw coupling hubs for sizes AL095,
LS225 66.7 4.974 475.0 3900 AL 100 and Al110
LS276 73.0 8.827 843.0 3100
CS280 76.2 15.738 1503.0 2600
CS285 102.0 22.199 2120.0 2300
DIMENSIONAL DATA
Style 1 Style 2

RD A RD A D

C E C E
B B

Part No. StyLSe Bore A B C D E RD


No. Min Max
LS095 1 11.1 28.6 53.6 76.2 25.4 - 21.1 69.9
LS100 1 11.1 35.0 64.5 105.7 35.1 - 30.7 81.0
LS110 1 15.9 42.0 84.3 127.0 42.7 - 36.8 101.6
LS150 1 15.9 48.0 95.3 138.2 44.4 - 43.4 119.1
LS190 2 19.1 55.0 114.3 147.8 49.3 101.6 43.4 139.7
LS225 2 19.1 66.7 127.0 160.0 55.4 108.0 43.4 155.7
LS276 2 22.2 73.0 157.0 239.5 79.2 127.0 75.4 188.2
CS280 2 31.8 76.2 190.5 239.5 79.2 139.7 75.4 227.1
CS285 2 31.8 102.0 215.9 271.5 95.3 165.1 75.4 254.0

Engineering &
NAISMITH Manufacturing Co. Pty. Ltd.

PAGE 83

You might also like