Form Reset

For laboratory use only

Public Works Laboratories Collection Request No. (CRN)
Geotechnical Engineering Office, Hong Kong
Test Request No. (TRN)

TESTING REQUEST FOR STEEL BARS

Account No. (if available) Customer Test Request Ref. No.
(Please provide the following project information if account no. is not available)
Customer (Works Dept/Office) Contract No.

Job Title Job No.

Work/Site Location

Please test the accompanying reinforcement bar sample(s) in accordance with : Type of steel reinforcing bar:
(Please select the appropriate box) (Please select the appropriate box)

CS2:1995 ( Class 1 Class 2 Class 3) Straight Decoiled (3)

If decoiled, straightening method:
CS2:2012 & Amendment No. 2/2018 ( Class 1 Class 2)
Manual Machine

Sample Details :
No. of specimen Range of
Nominal Bar Customer Heat/ Size of Name of
Set Electronic
size Grade pattern Sample Cast batch in stockist
No. T B RB sample ID
(mm) code Ref. No. No. tonnes company
(label)(*)

No(s) of corresponding mill certificate(s) attached.

Notes :- T = Tensile test ; B = Bend test ; RB = Rebend test.

(1) To be completed by a project works supervisor grade officer or above.
(2) To be completed by a project inspectorate grade officer or above (or his delegate).

(3) Aging method: heat the test piece to 100oC, maintain at this temperature (+/-10oC) for a period of 60 (+15,-0) min, and then cool
in still air to room temperature.
(*)
Insert the range of label to be used for the set of samples, or fill in the attached sheet for each sample.
#
Delete as inappropriate.

Sample(s) delivery supervised/handed over# by(1) Test(s) requested by(2)

Signature : Signature :
Name : Name :
Post : Post :
Tel./Fax No. : Tel./Fax No. :
Date : Date :

Fill in the box below the name, mailing and e-mail address to which the test report(s) should be sent or else mark “To be
collected” if the customer requests to collect the report(s) from the laboratory in person.

Preliminary results

Fax No.

C Eng D (GEO) 2403 (Sheet 1 of 4) Jan 2019

 For laboratory use only
Public Works Laboratories Collection Request No. (CRN)
Geotechnical Engineering Office, Hong Kong
Test Request No. (TRN)
TESTING REQUEST FOR SURFACE GEOMETRY (RELATIVE RIB AREA ONLY) OF STEEL
BARS
Account No. (if available) Customer Test Request Ref. No.
(Please provide the following project information if account no. is not available)
Customer (Works Dept/Office) Contract No.

Job Title Job No.

Work/Site Location

Please test the accompanying reinforcement bar sample(s) in accordance with : Type of steel reinforcing bar:
(Please select the appropriate box) (Please select the appropriate box)

CS2:2012 & Amendment No. 2/2018 ( Class 1 Class 2) Straight Decoiled

If decoiled, straightening method:
Manual Machine
Sample Details :
No. of
Range of
Nominal specimen Customer Size of Name of
Set Bar pattern Heat/ Electronic
size Grade Sample Ref. batch in stockist
No. Surface code Cast No. sample ID
(mm) No. tonnes company
Geometry (label)(*)

No(s) of corresponding mill certificate(s) attached.

(1)
Notes :- To be completed by a project works supervisor grade officer or above.
(2) To be completed by a project inspectorate grade officer or above (or his delegate).
(*)
Insert the range of label to be used for the set of samples, or fill in the attached sheet for each sample.
#
Delete as inappropriate.

Sample(s) delivery supervised/handed over# by(1) Test(s) requested by(2)

Signature : Signature :
Name : Name :
Post : Post :
Tel./Fax No. : Tel./Fax No. :
Date : Date :
Fill in the box below the name, mailing and e-mail address to which the test report(s) should be sent or else mark “To be
collected” if the customer requests to collect the report(s) from the laboratory in person.

Preliminary results

Fax No.

C Eng D (GEO) 2403 (Sheet 2 of 4) Jan 2019

 For laboratory use only
Public Works Laboratories Collection Request No. (CRN)
Geotechnical Engineering Office, Hong Kong
Test Request No. (TRN)

TESTING REQUEST FOR STEEL BARS

Account No. (if available) Customer Test Request Ref. No.
(Please provide the following project information if account no. is not available)
Customer (Works Dept/Office) Contract No.

Job Title Job No.

Work/Site Location

Please test the accompanying reinforcement bar sample(s) in accordance with : (Please select the appropriate box)

CS2:2012 & Amendment No. 2/2018 ( Class 1 Class 2)

Sample Details :
No. of specimen Range of
Nominal Bar Customer Heat/ Size of Name of
Set Electronic
size Grade Chemical pattern Sample Cast batch in stockist
No. sample ID
(mm) Composition code Ref. No. No. tonnes company
(label)(*)

No(s) of corresponding mill certificate(s) attached.

(1)
Notes :- To be completed by a project works supervisor grade officer or above.
(2) To be completed by a project inspectorate grade officer or above (or his delegate).
(*)
Insert the range of label to be used for the set of samples, or fill in the attached sheet for each sample.
#
Delete as inappropriate.

Sample(s) delivery supervised/handed over# by(1) Test(s) requested by(2)

Signature : Signature :
Name : Name :
Post : Post :
Tel./Fax No. : Tel./Fax No. :
Date : Date :
Fill in the box below the name, mailing and e-mail address to which the test report(s) should be sent or else mark “To be
collected” if the customer requests to collect the report(s) from the laboratory in person.

Preliminary results

Fax No.

C Eng D (GEO) 2403 (Sheet 3 of 4) Jan 2019

 For laboratory use only
Public Works Laboratories Collection Request No. (CRN)
Geotechnical Engineering Office, Hong Kong
Test Request No. (TRN)

SAMPLE LABEL I. D. FORM

Contract No.
Ref. No.

Nominal size Sample label I. D.

Set No.
(mm) T B RB SG CC

Legend : T = Tensile test

B = Bend test
RB = Rebend test
SG = Surface geometry test (relative rib area only)
CC = Chemical composition

C Eng D (GEO) 2403 (Sheet 4 of 4) Jan 2019

Print