Scribd
Upload
77 views6 pages

LAB 5 Electrical Machine

This lab report describes an experiment on speed control of a slipring induction motor. A group of 4 electrical engineering students conducted the practical work on 27 October 2020 under the supervision of lecturer Hj. Abdul Nasir Bin Abdullah. The aim, theory, procedure and simulation of the experiment are documented. The conclusion discusses how adaptive control techniques were used to identify motor parameters online and control the motor speed by varying the supply frequency to the stator windings. Operation of the induction motor depends on inducing currents in the rotor via a revolving magnetic field from the stator, causing the rotor to rotate at a speed slightly less than the field speed.

Uploaded by

Adrieana Daniella
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views6 pages

LAB 5 Electrical Machine

This lab report describes an experiment on speed control of a slipring induction motor. A group of 4 electrical engineering students conducted the practical work on 27 October 2020 under the supervision of lecturer Hj. Abdul Nasir Bin Abdullah. The aim, theory, procedure and simulation of the experiment are documented. The conclusion discusses how adaptive control techniques were used to identify motor parameters online and control the motor speed by varying the supply frequency to the stator windings. Operation of the induction motor depends on inducing currents in the rotor via a revolving magnetic field from the stator, causing the rotor to rotate at a speed slightly less than the field speed.

Uploaded by

Adrieana Daniella
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

JABATAN KEJURUTERAAN ELEKTRIK

LAB REPORT
DEE30043
ELECTRICAL MACHINES

PRACTICAL WORK TITLE 5 : SPEED CONTROL OF SLIPRING


INDUCTION MOTOR
PRACTICAL DATE: 27/10/20
PROGRAM/SECTION: DEE5D
GROUP NO: B

BIL STUDENT NAME STUDENT ID


1 ASYRAFF DANIEL BIN AHMAD 02DEE18F1008
MA’ARUFF
2 MUHAMMAD ZUHAIRI FIKRI BIN 02DEE18F1026
JAMALUDIN
3 MUHAMMAD BAHIUDDIN FIKRI BIN 02DEE18F1046
BAHAROM
4 MUHAMMAD ALIF DANIEL BIN HAZIZI 02DEE18F1204

Lecturer: HJ. ABDUL NASIR BIN ABDULLAH

TOTAL MARKS: /100


AIM

THEORY
PROCEDURE
SIMULATION

CONCLUSION
In our conclusion for this practical, the problem of designing a control for an induction motor has
been systematically studied and thoroughly discussed using tools from nonlinear system theory, both
for analysis and control purposes. Adaptive control techniques have been used to identify online
critical parameters.Operation of the induction motor is based on the ingenious principle of induction
of EMFs and currents in the rotor that is not directly connected to any supply source. Three-phase
currents in stator windings produce a revolving magnetic field, whose angular velocity, called a
synchronous velocity of the motor, is proportional to the supply frequency and inversely proportional
to the number of pole pairs. The latter parameter, an integer, depends on the configuration of the
windings, and it determines the field pattern. Lastly,the rotor rotates with a speed different than that
of the field. Consequently, lines of magnetic flux intersect rotor conductors, inducing the EMFs and
currents

You might also like