Virtual smart phone

CHAPTER 1
INTRODUCTION
For every leaving specie communication is a way by which they share/pass their
thoughts/fillings to one another. In this we introduce VSP, a virtual smart phone which is
basically a step to connect both physical and virtual world, by using a tiny projector, camera,
speaker, mike and cloud computing technology over the internet in the form of wearable devices.
In VSP all the required component are fabricated in the wearable devices by which use
communicate with the help of natural hand gesture, Hand movement and internet. In VSP user
communicate with each other by Virtual mobile phone with the help of touch gesture radio
waves and cloud computing technology

VSP will end the physical dependency of mobile phone.VSP provide novel interaction method
to seamlessly communicate with each other in a fun and intuitive way. The user can touch their
palm to make call and can also be used for watching movies or images on their palm/wrist.
Touch gesture is used for making and terminating the call.VSP uses touch-based interaction for
establishing communication between the different users.

The recent advent of novel sensing and display technologies has encouraged the development
of a variety of multi-touch and gesture based interactive systems. In these systems user may
interact directly with information using touch and natural hand gesture. Today there are lots of
way by device over the network.VSP basically turns the human which we can connect to digital
world in the controlled environment using multi-touch and gesture based interaction.
Unfortunately, most gestural and multi-touch based interactive systems are not mobile and small
mobile devices fail to provide the intuitive experience of full sized gestural systems. Moreover,
Information still resides on screens or dedicated projection surfaces. There is no link between our
interaction with these digital devices and interaction with the physical world around us. In this
paper, We present VSP-Virtual Smart Phone, a multi-touch and gesture based interaction system.
Which replaces the physical mobile phone device to the virtual multi-touch & natural gesture
based interaction on the use palm by which user communicate with other digital hand as a mobile
phone by which is able to user connect to the digital world as well as other peoples like their
friends and relatives.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

RELATED WORK

Recently, there have been a great variety of multi-touch interaction and mobile device products
or research prototypes that have made it possible to directly manipulate user interface
components using touch and natural hand gestures. Most of these systems depend on the physical
touch-based interactions between the user’s finger and physical screen and thus do not recognize
the incorporate touch independent freehand gestures. When we bring in connectivity, we can get
interact with the technology is mainly based on hand augmented reality, gesture recognition,
computer vision based algorithm etc

Augmented Reality:

Augmented reality(AR)is a term for live direct or indirect view of a physical real world
environment whose elements are augmented by virtual computer-generated imagery. It is related
to a more general concept called medicated reality in which a view of reality is
modified(possibly even diminished rather than augmented)by a computer.

Virtual Smart Phone uses Augmented Reality concept to superimpose digital information on the
physical world. With the help of advanced AR technology the information about the surrounding
real world of the user becomes interactive and digitally usable. Artificial information about te
environment and the objects in it can be stored and retrieved as an information layer on top of the
real world view .The main hardware components for augmented reality are; display, tracking,
input devices, and computer. Combination of powerful CPU, camera, accelerometers, GPS and
solid state compass are often present in modern Smartphone, which make them prospective
platform.

Gesture Recognition:

Gesture recognition is a topic in computer science language technology with the goal of
interpreting human gesture via mathematical algorithms. Gestures can originates from any bodily
motion or state but commonly originate from the face or hand. Current focuses in the field
include emotion recognition from the face and hand gesture recognition. Many approaches have
been used made using cameras and computer vision algorithms to interpret sign language, thus
building a richer bridge between machines and humans than primitive text user interfaces or even

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

GUIs (graphical user interface),which still limit the majority of input to keyboard and mouse.
Gesture recognition enables humans to interface with the machine(HMI)and interact naturally
without any mechanical devices. Gestures can be used to communication with a computer so we
will be mostly concerned with empty handed semiotic gestures.

Computer vision based algorithm:

Computer vision is the science and technology of machine that can see. As a scientific discipline,
computer vision is concerned with the theory behind artificial systems that extract information
from images. The image data can take many forms, such as video sequences, views from
multiple cameras ,or multi-dimensional data from a medical scanner. The software tracks the
user’s gestures using computer vision based algorithms. The computer vision system for tracking
and recognizing the hand postures that control the menus is based on a combination of multi-
scale color feature detection, view based hierarchical hand models and particle filtering. the hand
postures or states are represented in terms of hierarchies of multi-scale color image features at
different scales, with qualitative interrelations in terms of scale, position and orientation. In each
image, detection of multistage color features I performed.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

CHAPTER 2
RELEVANCE OF TECHNOLOGY
2.1 EXISTING SYSTEM
Smartphone’s are have some disadvantages over the conventional cell phones they have
gradually replaced. They are expensive , usually have a shorter battery life, and with so many
apps available, they can distracting in ways that simpler phones aren’t. Another disadvantage of
smart phone technology is the security risk they present when loaded with personal and business
data. Another disadvantage of smart phone is the price tag, especially for the top models , which
cost several hundred dollars on up to $1,000 or more. That makes them a major expense for
many people. Interruption mobile phones are a constant. Many of people they can’t leave without
Smartphone.

2.2 PROPOSED SYSTEM

In this we introduce VSP, a virtual smart phone which is basically a step to connect both
physical and virtual world, by using a tiny projector, camera, speaker, mike and cloud
computing technology over the internet in the form of wearable devices. In VSP all the required
component are fabricated in the wearable devices by which use communicate with the help of
natural hand gesture, Hand movement and internet. In VSP user communicate with each other by
Virtual mobile phone with the help of touch gesture radio waves and cloud computing
technology VSP will end the physical dependency of mobile phone.VSP provide novel
interaction method to seamlessly communicate with each other in a fun and intuitive way. The
user can touch their palm to make call and can also be used for watching movies or images on
their palm/wrist. Touch gesture is used for making and terminating the call.VSP uses touch-
based interaction for establishing communication between the different users.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

CHAPTER 3
3.1 METHODOLOGY
Working of VSP consist of 7 main steps i. e .Enabling & authenticate VSP ,Make call, receive
call, capture images/video, copying data and paste/pass data to other VSP & digital devices as
follows.

3.1.1. Enabling VSP

The VSP is a wearable device and user has the key to enable the device through the power
button. When user enable the VSP device, an icon appears on the user palm or arm as per user as
per selected by the user for showing the status(if a user has signed in).If not user can touch this
icon to login or change users using different authentication methods like; Enter user name and
password, Drawing a secret sign or pattern, Face recognition, Picture selection and Fingerprint
detection and palm line detection and palm line detection after a user has signed in successfully,
VSP is now ready for making and receive calls and other operations.

3.1.2 Make call

After Enabling VSP now user is able to make call and communicate with their relatives and other
persons. To make call, Dial mobile number using virtual key or using Voice recognition system.
For establishing call between two users, VSP uses two methods that are as follows.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

3.1.3 Make call using SIM:

VSP device has a micro SIM(Subscribe Identity Module)by which device established the call
using GSM/CDMA(Global System for Mobile Communications/Code Division Multiple Acess)
Technology.

3.1.4 Make Call Using VOIP:

VSP device has a WI-Fi(Wireless Fidelity)and Mobile data option which connect the devices to
the Internet/Intranet, by using this user is able to make calls using VOIP(Voice Over
IP)Technology. By using VOIP user is able to make the call to other VSP user as well as all the
others GSM and Internet VOIP enable Digital devices. When user is not connect to
Internet/Intranet, call is simply made using SIM without user’s permission but when user
connect to Internet it ask user to select the option user wanted to make call as per user selection
the call is connect to other person.

3.1.5 Receive Call

When a VSP user called by other VSP user or other digital device user bt(Physical Mobile phone
laptop ,Desktop and PDA)the notification of incoming call will be shown as per user selected
profile if user select vibrate mode, the small vibrator motor indicate incoming call by vibration &
also shows the identity of calling user on back side of palm using high density projector of VSP.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

If user select sound mode, incoming call notified by selecting ring tone with user Name on the
back side palm. In silent mode it only indicate the name of caller in the back side of palm. For
attending the incoming call user just touch, swipe the incoming call icon or other touch gesture
selected by user. To speake the caller user either use Bluetooth headset or wired headset which is
connected to VSP devices using 3.0 connector. User also is able to receive call directly using
VSP device speaker and Mice. For VOIP calls both user must be connected to the internet using
Wi-Fi or Mobile data.

3.1.6 Capture Image/Video

VSP is also to capture high quality images/video using their high quality by click capture image
button or by using gesture for taking photos. After taking the picture it shows the picture on user
hand using VSP system. For shoot video with the same gesture user just required to change the
camera mode photos to video. User also zoom in or zoom out while they capture image/Video
using their hand gesture.

3.1.7 Copy data

In VSP allows user to transfer(copy/paste) data from one human body to another human body or
device by using a single touch gesture. For copy data user has to login first VSP device and
connected to Internet/Intranet. For identifying a copy event in VSP users a long press(Detect by
listener Program)on copy able data item indicates to copy that data item. Whenever user touch
any copy able data a touch listener program start counting the time and when time exeeds the
threshold(1.5 sec) a message appears indicating that the data item is being copied and gets copied
to the user’s unique space in the data cloud. They copy data to the cloud can also be done by
alternative ways (instead of long press for 1.5 seconds).For example, double tap on data item or
draw a circle around the data item to initiate copy. Using this process user copy multiple file for
passing/pasting to other device all the copy data save in the cloud on temporary bases with
unique id of each data item.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

CHAPTER 4

IMPLIMENTATION

VSP invention is related to transfer of data and establishing communication from one human
body to other human body or from one human body to digital devices or vice-versa without any
platform dependency.VSP is basically an attempts to make the communication between users
and digital devices more tangible and interactive. The objective of this invention is establishing
the connection/communication between human and also with digital devices by a touch gesture
on the human palm/Hand.VSP work on two type of data transfer.

First, It establish voice communication between the user with the help of GSM technology
without any physical cellular phone.

Second, For transfer of data between the human and also with digital devices. It make use of the
internet ,intranet network or any other type of data servers through which device and human are
connected to and the distinguish from one user to another by the authentication methods such as
username/password, drawing a pattern on the virtual screen, face recognition, palm recognition
using palm lines or fingerprint detection can be used. In VSP voice communication from one
human to another can be done either by using GSM or internet/intranet technology.

The transferring of data from one human being to another or device using VSP. The first and
second digital devices may be gesture recognition VSP system connected to a network including
a data storage cloud and both uses VSP technology.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

TECHNOLOGIES USED
button, Snap button, sound up button, sound down button)and nano SIM card slot. In software it
use gesture recognition system, touch based interaction system, augmented reality, computer
vision based algorithm to fulfill all the objectives. VSP is basically a wearable device which is
combination of hardware as well as software. In hardware VSP consist of processor Unit, Ram &
Rom memory, Power supply(battery),Sensors, LED indicator for device mode(ON/OFF),Micro
vibrator Motor, USB port(for charging or attaching other devices,4 micro projectors(like pico
projectors),1 HD camera for capturing image and videos, low energy required Wi-Fi and
Bluetooth devices, GPS system,4 touch buttons(On/OFF

a. Voice call:
In VSP voice call done by using either by using SIM(GSM/CDMA)or through internet using
VOIP technology.

b. Data transfer:
Data transfer from device in using VSP is done by using data cloud. For accessing data cloud
user may be connected to internet either by Wi-Fi or mobile data using SIM.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

ADVANTAGES:
 This application provide user flexibility to access and use their personal information on
their Smartphone
 The application is highly secure too-user will have their own account created with a
unique username password.
 The digital aspect of our lives becomes more interactive, intuitive and natural because of
virtual Smartphone
 Virtual Smartphone allows users to access and use real-time mobile content
 Variety of multi-touch interaction and mobile devices allow to use

DISADVANTAGE:
 If any mismatch of username and password whole process is stopped
 If any damage in touch screen process is stopped

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

CHAPTER 5
APPLICATIONS:
1. Used in health monitoring system.
2. Used to find information of any product/Item.
3. Used to connect news and weather update.
4. Used to connect different devices virtually
5. Used in education and training system.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

CONCLUSION:
VSP is basically a computer –vision based wearable and gestural interface that augments the
physical world around us with digital information and proposes natural hand gesture as the
mechanism to interact with that information. It connect physical world to Virtual world.VSP give
intuitive way to communicate and data transfer between different users as well as different
digital devices. VSP invention fulfill our two future requirements. First it’s free from physical
dependency of devices. second it connect our physical world to virtual world some application of
VSP .

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

BIBLIOGRAPHY;
[1] p. Mistry, Liyan Chang, P. Maes. ”wuw- wear your world –a wearable gestural
interface”Boston,United ACM 978-1-60558-246-7/09/04.

[2] Happy, Pragti, Dr Niranjan Bhattacharyya, ”Sparsh (Touch The Cloud)”International Journal
of Emerging Technology and Advanced Engineering(IJETAE),ISSN 2250-2459,ISO 9001:2008
Certified Journal, Volume 5,Issue 3,March 2014.

[3] Mikael Goldstein, Didier Chincholle ”the finger-Joint gesture wearable keypad” Stockholm,
Swesen Research,SE-164 80.

[4] Mathias Kolsch, Matthew Turk “keybords without keyboards:a survey of virtual
keyboards”Dept of Computer Science University of California at Santa Barbara,CA.

Dept of CSE, GEC, Haveri 2019-20

 Virtual smart phone

Dept of CSE, GEC, Haveri 2019-20