Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Voltage - Adjust: Cerrar SIS

    Uploaded by

    georgi15685

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Voltage - Adjust: Cerrar SIS

    Uploaded by

    georgi15685
    19 views3 pages

    Original Title

    Voltage - Adjust

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views3 pages

    Voltage - Adjust: Cerrar SIS

    Uploaded by

    georgi15685

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    3406C Generator Set 9ES00001-UP(SEBP2752 - 11) - Estructura del documento Página 1 de 3

    Cerrar SIS

    Pantalla anterior

    Producto: GENERATOR SET


    Modelo: 3406C GENERATOR SET 9ES
    Configuración: 3406C Generator Set 9ES00001-UP

    Pruebas y Ajustes
    VR6 Voltage Regulator
    Número de medio -RENR2480-03 Fecha de publicación -01/09/2003 Fecha de actualización -11/09/2003

    i01968173

    Voltage - Adjust
    SMCS - 4467-025

    Illustration 1 g00779323
    VR6 Voltage Regulator

    (1) Voltage adjustment

    https://127.0.0.1:8443/sisweb/servlet/cat.dcs.sis.controller.techdoc.CSSISFormatTechDoc... 09/06/2006
    3406C Generator Set 9ES00001-UP(SEBP2752 - 11) - Estructura del documento Página 2 de 3

    Illustration 2 g01021519

    The Cat VR6 presents an electrical shock/electrocution hazard. This hazard will cause
    serious injury or death.

    Service by trained personnel only.

    The terminals and heat sinks are live at hazardous voltages when power is applied and
    for up to 8 minutes after power is removed.

    Rotate the voltage adjustment (1) in the clockwise direction in order to increase the voltage. Rotate the voltage adjustment (1)
    in the counterclockwise direction in order to decrease the voltage.

    When the jumper is installed between terminals 4 and 7, the nominal voltage of the generator can be varied over the operating
    range by using the voltage adjustment (1) .

    In order to use an external voltage adjust rheostat, perform the following procedure:

    1. Stop the genset.

    2. Remove the jumper between terminals 4 and 7.

    3. Connect an external voltage adjust rheostat across terminals 6A and 7. The rheostat should be rated at 10 kOhm.

    Note: On some gensets, the voltage adjust rheostat is located on the control panel.

    4. Turn the voltage adjustment (1) on the regulator in a fully clockwise direction in order for the external adjustment to
    operate properly.

    https://127.0.0.1:8443/sisweb/servlet/cat.dcs.sis.controller.techdoc.CSSISFormatTechDoc... 09/06/2006
    3406C Generator Set 9ES00001-UP(SEBP2752 - 11) - Estructura del documento Página 3 de 3

    Copyright 1993 - 2006 Caterpillar Inc. Fri Jun 9 15:40:49 UTC-0400 2006
    Todos los derechos reservados.
    Red privada para licenciados del SIS.

    https://127.0.0.1:8443/sisweb/servlet/cat.dcs.sis.controller.techdoc.CSSISFormatTechDoc... 09/06/2006

    You might also like