(©2010 Pearson Education, ln, Upper Sale River NJ. All rights reserved. This material is protected under ll copyright laws as they curently ‘exist No portion ofthis material may be reproduced, in any form or by any means, without permission ia writig rom the publisher. "13-20, The 101b block A travels to the right at v4 = 2fi/sat the instant shown Ifthe coefficient of kinetic fiction is xp = 0.2 between the surface and A, determine the velocity of A when it has moved 4 ft Block B has a weight of 20 1b. Block A: fzp= ms -742= (Soon Weight & +138, = ma, Kinematics: Solving Eqs (1)-(3): ag =—ITATBS YS ay = SETH T= 7331 w= Wh + 2a(8- 5) = QF #2071734 - 0) 10 ay TT 20lb a ® @ 19213-23, ‘The 2-kg shaft CA passes through a smooth journal bearing at B Initially, the springs, which are coiled loosely around the shaft, are unstretched when no force is applied to the shaft In this position s = s° = 250 mm and the shaft is at rest. If a horizontal force of F = SKN is applied, determine the speed of the shaft atthe instant = SO mm, s’ = 430mm. The ends of the springs are attached to the ‘bearing at B and the caps at Cand A Fea = kept = 3000s Fay = kag = 2000 EER, = maz; 5000 ~ 300% ~ 2000 = 2a 22500 ~ 2500x adx~vdy oon 2500(0.2) (2) a 2 2 v= 30m/s 194(© 2010 Pearson Education, Ine, Upper Saddle River, NJ. All rights reserved. This materials protected under ll copyright laws as they curently ‘exist. No portion ofthis material may be reproduced in any form or by any means without permission in writing from the publisher. 13.34, In the cathodo-ray tubecletrons having a mass m are emitted from a source point Sand begin to travel horizontally with an initial velocity. vp. While passing ‘between the grid plates a distance f, they are subjected toa vertical force having a magnitude eV/w, where e isthe 5 charge of an electron, V the applied voltage acting across the plates and w the distance between the plates After passing clear of the plates, the electrons then travel in Straight lines and strike the screen at A. Determine the detection dof the electrons in terms of the dimensions of the voltage plate and tube. Neglect gravity which causes a slight vertial deflection when the electron travel from Sto the srecn and the slight deflection between the plates wv During , constant acceleration, (Ht) ve war naan (Se) sone 2YQ wm Ans 203,"13-36. Blocks A and B cach have a mass m. Determine the largest horizontal force P which can be applied to B so that A will not move relative to B. All surfaces are smooth, Require Block A: +1ER, 43r, Block B: #3F,= ma P~ Nsind= ma P= mg tan6 = mg and P mg tan 204(© 2010 Pearson Education, Inc, Upper Saddle River, NL. Al hts reserved. This materials protected under al copyright laws as they currently xs. No portion of this material may be reproduced in any form oe by any means without permission in writing from the publisher, 13-42. Block A has a mass m, and is attached to a spring having a stiffness k and unstretched length ly. If another block B, having a mass my, is pressed against A so that the spring deforms a distance d, determine the distance both blocks slide on the smooth surface before they begin to separate. What is their velocity at this instant? kma(d ~ 8) Gat) (a+ a) NeOwhen d—x=0, of sad vdv = ads * ee [eda [o> [ran 1k 20a + ma) me Ne —>% 209