Management Information System

Table of Contents
MIS

b
A
e
s
i
a
Q
.
r
D
Department of Management Sciences National Textile University
Management

Page I
Faisalabad

Information Systems
Assignment 1

D r
. Q ai
A bba
s
s er
Management Information System

ACKNOWLEDGEMENT

I am very thankful to Mr. Qiaser Abbas for giving this assignment as it has been very useful in
understanding the basic and fundamental concepts of MIS.

Management Information System has now become an important subject for the management
sciences students and it has grew its worth as the use of IT in business become frequent.

There are two more people who helped me in preparing this assignment and has guided me very
much they are;

1. Mr. Qasim Abbas

Student MCS Virtual University

2. Mr. Saleem Akhtar

Lecturer Computers ICON college

Table of Contents Page II

Management Information System

TABLE OF CONTENTS

Acknowledgement.........................................................................................................................II
Question 1........................................................................................................................................1
What is MiS and its classification..............................................................................................1
Management Information System...............................................................................................1
Types of Information Systems.....................................................................................................1
Question 2........................................................................................................................................4
Exlain strtigical MIS in Detail and give Relevent Examples..................................................4
Question 3........................................................................................................................................5
Write a Note on Planning and Development of MIS...............................................................5
Question 4........................................................................................................................................6
Diffrence between Mis and ERP................................................................................................6
ERP vs. MIS...................................................................................................................................6
Question 5........................................................................................................................................7
What are Major Roles of E-Business Management.................................................................7
Question 6........................................................................................................................................8
what are Major Classifications of Information System to capture Functional and Cross
Functional requirements............................................................................................................8
Question 7........................................................................................................................................9
What are success and Failure of Information Technology for providing business
Strategies......................................................................................................................................9
Question 8......................................................................................................................................10
What are the steps to Design Information System.................................................................10
PHASES OF SYSTEM DEVELOPMENT LIFE CYCLE.......................................................10
Question 9......................................................................................................................................15
Diffrence Between MIS and Decision Support System.........................................................15
Mangement Information System vs Decision Support System.................................................15
References.....................................................................................................................................17

Table of Contents Page III

Management Information System

QUESTION 1

WHAT IS MIS AND ITS CLASSIFICATION

MANAGEMENT INFORMATION SYSTEM

MIS is a computer system in an organization that presents information about business

operation. This is also used to pass on to the human resource, which control these systems.
Usually, in a big company, MIS refers to a centrally synchronized structure of computer know-
how and administration, often including workstations but also put together extensions of the
corporation’s whole network of computer resources. Originally, business computers were used
for the sensible business of calculating the payroll and maintaining track of financial records.  

TYPES OF INFORMATION SYSTEMS

Information systems differ in their business needs depending upon the different levels of
Managements. On the following bases information systems are classified into following three
major types of Information Systems are as under:

1. Transaction Processing Systems

2. Management Support Systems
3. Decision Support Systems

TRANSACTION PROCESSING SYSTEMS

It records or process data resulting from a business transaction or batch processing also
known as real time processing (online processing).

MANAGEMENT SUPPORT SYSTEMS

It produces management-oriented reporting for planning, control and decision making. These
reports are usually generated in predetermined schedule and appear in prearranged format. MIS
use operational data to generate these reports.

DECISION SUPPORT SYSTEMS

Decision Support System is an information system application that provides its user with
decision oriented information whenever decision making situation arises, it does not require
database up-gradation and use to calculate profitability and for future forecasting as well as risk
analysis.

The following Figure will help in a better understanding of these types.

Management Information System

RELATION OF INFORMATION SYSTEMS TO LEVELS OF ORGANIZATION

Transaction Processing Systems

TPS processes business transaction of the organization. Transaction can be any activity of the
organization. Transactions differ from organization to organization. For example, take a railway
reservation system. Booking, canceling, etc are all transactions. Any query made to it is a
transaction. However, there are some transactions, which are common to almost all
organizations. Like employee new employee, maintaining their leave status, maintaining
employees’ accounts, etc. This provides high speed and accurate processing of record keeping of
basic operational processes. These include calculation, storage and retrieval. Transaction
processing systems provide speed and accuracy, and can be programmed to follow routines
functions of the organization.

Management Information Systems

These systems assist lower management in problem solving and making decisions. They use
the results of transaction processing and some other information also. It is a set of information
processing functions. It should handle queries as quickly as they arrive. An important element of
MIS is database. A database is a non-redundant collection of interrelated data items that can be
processed through application programs and available to many users.

Decision Support Systems

Management Information System

These systems assist higher management to make long term decisions. These type of systems
handle unstructured or semi structured decisions. A decision is considered unstructured if there
are no clear procedures for making the decision and if not all the factors to be considered in the
decision can be readily identified in advance. These are not of recurring nature. Some recur
infrequently or occur only once. A decision support system must very flexible. The user should
be able to produce customized reports by giving particular data and format specific to particular
situations.
SUMMARY OF INFORMATION SYSTEMS

Categories of Information Characteristics

System

Substitutes computer-based processing for manual

procedures.
Transaction Processing System
Deals with well-structured processes. Includes record
keeping applications.

Provides input to be used in the managerial decision

process. Deals with supporting well structured decision
Management information system
situations. Typical information requirements can be
anticipated.

Provides information to managers who must make

Decision support system judgments about particular situations. Supports decision-
makers in situations that are not well structured.
Management Information System

QUESTION 2

EXLAIN STRTIGICAL MIS IN DETAIL AND GIVE RELEVENT

EXAMPLES

Strategic information is the information needed by top most management for decision
making. For example the trends in revenues earned by the organization are required by the top
management for setting the policies of the organization. This information is not required by the
lower levels in the organization. The information systems that provide these kinds of information
are known as Decision Support Systems.
Management Information System

QUESTION 3

WRITE A NOTE ON PLANNING AND DEVELOPMENT OF MIS

Management Information System

QUESTION 4

DIFFRENCE BETWEEN MIS AND ERP

The use of information technology to make businesses more competitive and productive has
become very popular and almost necessary in the last time. There are many systems that are used
by organizations for this purpose. Two such powerful tools that provide management with all the
relevant information that helps them to take better and effective decisions are ERP and MIS. There
are many similarities in these two approaches, although there are launching a glare differences too.
This article will highlight these differences to allow managers to choose one of them according to
their requirements.

ERP

ERP is the Enterprise Resource Planning and refers to a wide range of activities that are
basically served to help direct business in a better way. The information that is available through
ERP helps a manger to learn the values of key indicators or parameters. These values are important
for the administration to judge whether they are moving in the right direction to accomplish the
goals and objectives of the organization. There are many applications of any ERP software as it can
be used for inventory planning, purchasing, product planning, the interaction with suppliers,
customer service has also eye on the orders. Additionally the ERP software can help the
administration in human resource planning as well as in applications to finance. An ERP system
requires new work processes and training of employees.

MIS

It represents the Administration and Computer system is used to make essential information
available to the administration that is vital for the better administration. It is basically a computer
system computer integer operations business. It basically maintains information about all
departments of an organization in a central database and makes available the information that
managers can make better decisions based on this information and also the direct flow of
information from one department to another in a smooth and streamlined manner. MIS has the
ability to produce reports as and when requested by the user. It is mostly used to create reports
based on which decisions are taken.
 
Management Information System

QUESTION 5

WHAT ARE MAJOR ROLES OF E-BUSINESS MANAGEMENT

Management Information System

QUESTION 6

WHAT ARE MAJOR CLASSIFICATIONS OF INFORMATION SYSTEM

TO CAPTURE FUNCTIONAL AND CROSS FUNCTIONAL REQUIREMENTS

In any organization Information

Management Information System

QUESTION 7

WHAT ARE SUCCESS AND FAILURE OF INFORMATION

TECHNOLOGY FOR PROVIDING BUSINESS STRATEGIES

The success and failure of the IT for providing the

Management Information System

QUESTION 8

WHAT ARE THE STEPS TO DESIGN INFORMATION SYSTEM

In the System Design terminology, we mean how to create system software which can help in
managing the information system, and therefore it become useful in management decision
making, following different phases of system development life cycle are used in a step wise
sequence:

1. Preliminary study
2. Feasibility study
3. Detailed system study
4. System analysis
5. System design
6. Coding
7. Testing
8. Implementation
9. Maintenance

PHASES OF SYSTEM DEVELOPMENT LIFE CYCLE

Let us now describe the different phases and related activities of system development life
cycle.

PRELIMINARY SYSTEM STUDY

Preliminary system study is the first stage of system development life cycle. This is a brief
investigation of the system under consideration and gives a clear picture of what actually the
physical system. The initial system study involves the preparation of a ‘System Proposal’ which
lists the Problem Definition, Objectives of the Study, Terms of reference for Study, Constraints
and Expected Benefits of the new system as per user requirements.

The system proposal is prepared by the System Analyst (who studies the system). The
management may accept the proposal and the cycle proceeds to the next stage. The management
may also reject the proposal or request some modifications in the proposal. In summary, we
would say that system study phase passes through the following steps:

1. Problem identification and project initiation

2. Background analysis
3. Inference or findings (system proposal)

FEASIBILITY STUDY

The feasibility study is basically the test of the proposed system in the light of its
workability, meeting user’s requirements, effective use of resources and of course, the cost
effectiveness. These are categorized as technical, operational, economic and schedule feasibility.
Management Information System

The main goal of feasibility study is not to solve the problem but to achieve the scope. In the
process of feasibility study, the cost and benefits are estimated with greater accuracy to find the
Return on Investment (ROI). This also defines the resources needed to complete the detailed
investigation. The result is a feasibility report submitted to the management. This may be
accepted or accepted with modifications or rejected. The system cycle proceeds only if the
management accepts it.

DETAILED SYSTEM STUDY

The detailed investigation of the system is carried out in accordance with the objectives of
the proposed system. This involves detailed study of various operations performed by a system
and their relationships within and outside the system. During this process, data are collected on
the available files, decision points and transactions handled by the present system. Interviews,
on-site observation and questionnaire are the tools used for detailed system study. Using the
following steps it becomes easy to draw the exact boundary of the new system under
consideration:

1. Keeping in view the problems and new requirements

2. Workout the pros and cons including new areas of the system

All the data and the findings must be documented in the form of detailed data flow diagrams
(DFDs), data dictionary, logical data structures and miniature specification. The main points to
be discussed in this stage are:

1. Specification of what the new system is to accomplish based on the user

requirements.
2. Functional hierarchy showing the functions to be performed by the new system
and their relationship with each other.
3. Functional network, which are similar to function hierarchy but they highlight
the functions which are common to more than one procedure.
4. List of attributes of the entities – these are the data items which need to be held
about each entity (record)

SYSTEM ANALYSIS

Systems analysis is a process of collecting factual data, understand the processes involved,
identifying problems and recommending feasible suggestions for improving the system
functioning. This involves studying the business processes, gathering operational data,
understand the information flow, finding out bottlenecks and evolving solutions for overcoming
the weaknesses of the system so as to achieve the organizational goals. System Analysis also
includes subdividing of complex process involving the entire system, identification of data store
and manual processes. The major objectives of systems analysis are to find answers for each
business process: What is being done? How is it being done? Who is doing it? When is he doing
it? Why is it being done? How can it be improved? It is more of a thinking process and involves
the creative skills of the System Analyst. It attempts to give birth to a new efficient system that
satisfies the current needs of the user and has scope for future growth within the organizational
constraints. The result of this process is a logical system design. Systems analysis is an iterative
process that continues until a preferred and acceptable solution emerges.
Management Information System

SYSTEM DESIGN

Based on the user requirements and the detailed analysis of the existing system, the new
system must be designed. This is the phase of system designing. It is the most crucial phase in
the developments of a system. The logical system design arrived at as a result of systems
analysis is converted into physical system design. Normally, the design proceeds in two stages:

1. Preliminary or General Design

2. Structured or Detailed Design

Preliminary or General Design: In the preliminary or general design, the features of the
new system are specified. The costs of implementing these features and the benefits to be derived
are estimated. If the project is still considered to be feasible, we move to the detailed design
stage.

Structured or Detailed Design: In the detailed design stage, computer oriented work begins
in earnest. At this stage, the design of the system becomes more structured. Structure design is a
blue print of a computer system solution to a given problem having the same components and
inter-relationships among the same components as the original problem. Input, output, databases,
forms, codification schemes and processing specifications are drawn up in detail. In the design
stage, the programming language and the hardware and software platform in which the new
system will run are also decided.

There are several tools and techniques used for describing the system design of the system.
These tools and techniques are:

1. Flowchart
2. Data flow diagram (DFD)
3. Data dictionary
4. Structured English
5. Decision table
6. Decision tree

CODING

The system design needs to be implemented to make it a workable system. This demands the
coding of design into computer understandable language, i.e., programming language. This is
also called the programming phase in which the programmer converts the program specifications
into computer instructions, which we refer to as programs. It is an important stage where the
defined procedures are transformed into control specifications by the help of a computer
language. The programs coordinate the data movements and control the entire process in a
system.

It is generally felt that the programs must be modular in nature. This helps in fast
development, maintenance and future changes, if required.

TESTING

Before actually implementing the new system into operation, a test run of the system is done
for removing the bugs, if any. It is an important phase of a successful system. After codifying the
whole programs of the system, a test plan should be developed and run on a given set of test
Management Information System

data. The output of the test run should match the expected results. Sometimes, system testing is
considered a part of implementation process. Using the test data following test run are carried
out:

1. Program test
2. System test

Program Test: When the programs have been coded, compiled and brought to working
conditions, they must be individually tested with the prepared test data. Any undesirable
happening must be noted and debugged (error corrections)

System Test: After carrying out the program test for each of the programs of the system and
errors removed, then system test is done. At this stage the test is done on actual data. The
complete system is executed on the actual data. At each stage of the execution, the results or
output of the system is analyzed. During the result analysis, it may be found that the outputs are
not matching the expected output of the system. In such case, the errors in the particular
programs are identified and are fixed and further tested for the expected output. When it is
ensured that the system is running error-free, the users are called with their own actual data so
that the system could be shown running as per their requirements.

IMPLEMENTATION

After having the user acceptance of the new system developed, the implementation phase begins.
Implementation is the stage of a project during which theory is turned into practice. The major
steps involved in this phase are:

1. Acquisition and Installation of Hardware and Software

2. Conversion
3. User Training
4. Documentation

The hardware and the relevant software required for running the system must be made fully
operational before implementation. The conversion is also one of the most critical and expensive
activities in the system development life cycle. The data from the old system needs to be
converted to operate in the new format of the new system. The database needs to be setup with
security and recovery procedures fully defined.

During this phase, all the programs of the system are loaded onto the user’s computer. After
loading the system, training of the user starts. Main topics of such type of training are:

1. How to execute the package

2. How to enter the data
3. How to process the data (processing details)
4. How to take out the reports

After the users are trained about the computerized system, working has to shift from manual to
computerized working. The process is called ‘Changeover’. The following strategies are
followed for changeover of the system.

(i) Direct Changeover: This is the complete replacement of the old system by the new system. It
is a risky approach and requires comprehensive system testing and training.
Management Information System

(ii) Parallel run: In parallel run both the systems, i.e., computerized and manual, are executed
simultaneously for certain defined period. The same data is processed by both the systems. This
strategy is less risky but more expensive because of the following:

1. Manual results can be compared with the results of the computerized system.
2. The operational work is doubled.
3. Failure of the computerized system at the early stage does not affect the
working of the organization, because the manual system continues to work, as
it used to do.

(iii) Pilot run: In this type of run, the new system is run with the data from one or more of the
previous periods for the whole or part of the system. The results are compared with the old
system results. It is less expensive and risky than parallel run approach. This strategy builds the
confidence and the errors are traced easily without affecting the operations. The documentation
of the system is also one of the most important activity in the system development life cycle.
This ensures the continuity of the system. There are generally two types of documentation
prepared for any system. These are:

1. User or Operator Documentation

2. System Documentation

The user documentation is a complete description of the system from the users point of view
detailing how to use or operate the system. It also includes the major error messages likely to be
encountered by the users. The system documentation contains the details of system design,
programs, their coding, system flow, data dictionary, process description, etc. This helps to
understand the system and permit changes to be made in the existing system to satisfy new user
needs.

MAINTENANCE
Maintenance is necessary to eliminate errors in the system during its working life and to tune the
system to any variations in its working environments. It has been seen that there are always some
errors found in the systems that must be noted and corrected. It also means the review of the
system from time to time. The review of the system is done for:

1. Knowing the full capabilities of the system

2. Knowing the required changes or the additional requirements
3. Studying the performance.

If a major change to a system is needed, a new project may have to be set up to carry out the
change. The new project will then proceed through all the above life cycle phases.
Management Information System

QUESTION 9

DIFFRENCE BETWEEN MIS AND DECISION SUPPORT SYSTEM

MANGEMENT INFORMATION SYSTEM VS DECISION SUPPORT SYSTEM

MIS and DSS are two abbreviations that are often heard in the field
of Business Management. They differ in a few aspects.

It is important to know that MIS stands for Management Information Systems whereas DSS
stands for Decision Support Systems. It is interesting to note that MIS is a type of link that
assists in the communication between managers of various disciplines in a business firm or an
organization. On the whole it plays a very important role in building up communication among
the corporate people.

DSS on the other hand is an improvement of the concept of MIS. It is true that both of them
differ in terms of their focus. DSS focuses more on leadership. It is all about senior management
in a firm providing innovative vision.

On the other hand MIS focuses more on the information gathered and the information that
has poured from different quarters. Experts on managerial behavior say that DSS focuses more
on decision making. MIS on the other hand focuses more on planning the report of various topics
concerned with the organization that would assist the managers to take vital decisions pertaining
to the functioning of the organization.

One of the finest differences between MIS and DSS is that MIS focuses on operational
efficiency whereas DSS focuses more on making effective decision or in other words helping the
company to do the right thing. Flow of information is from both sides, up and down in the case
of MIS. On the other flow of information is only upward in the case of DSS.

In the case of DSS the report can be flexible whereas in the case of MIS the report is usually
not flexible. MIS is characterized by an input of large volume of data, an output of summary
reports and process characterized by a simple model. On the other hand DSS is featured by an
input of low volume of data, an output of decision analysis and a process characterized by
interactive model.

Experts would also say that MIS is a primary level of decision making whereas DSS is the
ultimate and the main part of the decision. This is one of the most talked about different between
the two.

As a matter of fact MIS is all about theory whereas DSS is all about practice and analysis. An
organization should employ both the systems effectively.
Management Information System

SUMMARY OF THE DIFFERENCES

Decision Support System Management Information System

Periodic, exception, demand, Provide information about performance of

and push reports organization

Pre-specified, fixed format by extraction and

Information produced manipulation of data Interactive inquiries and
responses

Ad hoc, flexible, and adaptable Information produced by analytical modeling of

format business data

Provide information and

decision support to analyze
problems
Management Information System

REFERENCES

1. Difference between MIS and DSS cited at http://www.differencebetween.com/difference-

between-mis-and-vs-dss/
2. Types of Information Systems cited at
http://www.freetutes.com/systemanalysis/types-of-information-systems.html
3. Difference between MIS and ERP cited at http://www.vspages.com/ERp-vs-MIS-
5294/
4. Ramesh Behal, James, A, O’Brien Management Information Systems 9th Ed.
Management Information System