Scribd
Upload
285 views2 pages

PFD Check List

The document provides a checklist for reviewing a Process Flow Diagram (PFD) with 6 parameters: 1) General, 2) Equipment and packages, 3) Instrumentation and process control, 4) Safeguarding, 5) Heat and mass balance, and 6) Input adequacy. Each parameter includes specific items to check to ensure adherence. The overall rating for the PFD according to the checklist is 100%.

Uploaded by

ankur2061
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
285 views2 pages

PFD Check List

The document provides a checklist for reviewing a Process Flow Diagram (PFD) with 6 parameters: 1) General, 2) Equipment and packages, 3) Instrumentation and process control, 4) Safeguarding, 5) Heat and mass balance, and 6) Input adequacy. Each parameter includes specific items to check to ensure adherence. The overall rating for the PFD according to the checklist is 100%.

Uploaded by

ankur2061
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Project OVERALL RATING 100.

00%

Item
Description

Item No

Document PFD/PFS
Description

Document No.

Sr. No Parameter Description Checks Adherence to the Remarks if any


subject Parameter
(Y/N)
1 General 1. Correct drawing title, drawing no. as per Y
drawing and doc. register and revision no.

2. Title block as per project requirement and Y


correct job. No.

3. Drawing continuation flags match between Y


drawings.

4. Standard hold list and action party (in brackets) Y

5. Specific notes included and nos. matching. Y

6. Future facilities (shown dotted if required) Y

7. Original master drawing nos. listed. Y

8. Standard drawing legends followed for Y


equipment, instruments, etc.

9. SDC and client comments incorporated Y

10. Revision triangles and revision clouds shown Y


on drawing updates.

2 Equipment and packages 1. All equipment (operating and standby) Y


included.

2. Battery limits shown for packages Y

3. Equipment and package tag nos. given as per Y


equipment numbering procedure and correct
description given.

4. Design information data included as per data Y


sheets.

5. Directional arrows shown on Process and Y


Utility lines

6. Stream nos. shown on major process streams Y


including intermittent streams.
Sr. No Parameter Description Checks Adherence to the Remarks if any
subject Parameter
(Y/N)
3 Instrumentation and process 1. Control valves and type shown (pneumatic, Y
control motorized, Ball valve, butterfly valve, etc.)

2. All control loops shown Y

3. All key Instrumentation shown. Y

4 Safeguarding 1. Over pressure protection shown Y

2. Process shut down valves (PSD) shown. Y

3. Emergency shut down valves ESDV shown. Y

4. Emergency Blow Down requirements shown. Y

5 Heat and Mass Balance 1. Heat and Mass Balance included separately or Y
as part of PFD.

2. Stream Nos. matching with Process Flow Y


Diagram & Simulation model.

3. Process data e.g. Pressure, temperature, flow Y


rates etc. as per simulation model

4. All options as per project requirements Y


considered.

5. Specific notes included and nos. are matching. Y

6 Input Adequacy Check for Completeness/ veracity of input so as Y


to enable process to go ahead with preparation of
process data sheets.

You might also like