www.osram-os.

com
Produktdatenblatt | Version 1.1
SFH 4737
 

SFH 4737
OSLON ® P1616
IR Broadband Emitter

Applications
——Infrared Spectroscopy

Features:
——Package: diffuse silicone
——Corrosion Robustness Class: 3B
——ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
——Spectral range of emission: (typ) 650 ... 1050 nm
——Wide viewing angle of 130°
——Small outline dimensions

Ordering Information 
Type Total radiant flux 1) Ordering Code
typ.


IF = 350 mA; λ = 600 nm - 1050 nm; tp = 10ms 
Φe

SFH 4737 74 mW Q65113A0772



1 Version 1.0 | 2020-09-28

 SFH 4737
 

Maximum Ratings
TA = 25 °C
Parameter Symbol Values

Operating temperature Top min. -40 °C

max. 85 °C
Storage temperature Tstg min. -40 °C
max. 105 °C
Junction temperature Tj max. 125 °C
Forward current IF max. 500 mA
Surge current IFSM max. 1A
tp ≤ 10 ms; D = 0.005 
Power consumption Ptot max. 1750 mW
ESD withstand voltage VESD max. 2 kV
acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

For the forward current and power consumption please see “maximum
permissible forward current” diagram




2 Version 1.0 | 2020-09-28

 SFH 4737
 

Characteristics
IF = 350 mA; tp = 10 ms; TA = 25 °C
Parameter Symbol Values

Half angle φ typ. 65 °

Forward voltage 2) VF typ. 2.9 V
max. 3.4 V
Forward voltage 2) VF typ. 2.95 V
IF = 500 mA; tp = 100 µs max. 3.5 V
Radiant intensity 3) Ie typ. 27 mW/sr
λ = 350 - 600 nm 
Radiant intensity  3) Ie typ. 18 mW/sr
λ = 600 - 1050 nm 
Total radiant flux 1) Φe typ. 160 mW
λ = 350 - 600 nm 
Total radiant flux 1) Φe typ. 74 mW
λ = 600 - 1050 nm 
Spectral flux Φe,λ typ. 210 µW/nm
λ = 750 nm
Spectral flux Φe,λ typ. 210 µW/nm
λ = 850 nm
Spectral flux Φe,λ typ. 240 µW/nm
λ = 950 nm
Thermal resistance junction solder point real 4) RthJS real typ. 4.5 K / W
max. 5.5 K / W




3 Version 1.0 | 2020-09-28

 SFH 4737
 

Relative Spectral Emission 5), 6)

Ie,rel = f (λ); IF = 350 mA; tp = 10 ms

[ ]
1

0.1

0.01

10-3

400 600 800 1000

λ[ ]

Radiation Characteristics 5), 6)

Ie,rel = f (φ)

φ[ ]
-10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
-20° 1.0


: 0° -30°
0.9
-40°
0.8
-50° 0.7
0.6
-60°
0.5

-70° 0.4
0.3

-80° 0.2
0.1
-90° 0.0


4 Version 1.0 | 2020-09-28

 SFH 4737
 

Forward current 5), 6) Relative Total Radiant Flux 5), 6)

IF = f (VF); Φe/Φe(350mA) = f (IF); λ = 600 - 1050 nm;

single pulse; tp = 100 µs single pulse; tp = 100 µs
Φ
[ ]
1000 Φ

500
1

0.5

100

50

0.1

0.05

10
2.7 2.8 2.9 3.0 3.1 0.01 0.05 0.1 0.5 1
[ ] [ ]

Max. Permissible Forward Current Permissible Pulse Handling Capability

IF,max = f (TS); Rthjs = 5.5K / W IF = f (tp); D = parameter; TS = 85°C

[ ] 0.5 [ ]
1.0

0.4

 0.8

0.3
0.6

0.2 0.4 :D=1

: D = 0,5
: D =0,2
: D =0,1
0.1 0.2 : D =0,05
: D =0,02
: D =0,01
: D =0,005
0.0 0.0 -5
0 20 40 60 80 10 10-4 10-3 0.01 0.1 1 10
[ ] [ ]


5 Version 1.0 | 2020-09-28

 SFH 4737
 

Dimensional Drawing 7)

Further Information:
Approximate Weight: 6.8 mg

Package marking: Anode

Corrosion test: Class: 3B

Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC
60068-2-43)




6 Version 1.0 | 2020-09-28

 SFH 4737
 

Recommended Solder Pad 7)




7 Version 1.0 | 2020-09-28

 SFH 4737
 

Reflow Soldering Profile

Product complies to MSL Level 2 acc. to JEDEC J-STD-020E
OHA04525
300
˚C
T 250
240 ˚C Tp 245 ˚C
217 ˚C tP
200
tL

150
tS

100

50
25 ˚C
0
0 50 100 150 200 250 s 300
t

Profile Feature Symbol Pb-Free (SnAgCu) Assembly Unit

Minimum Recommendation Maximum
Ramp-up rate to preheat*) 2 3 K/s
25 °C to 150 °C
Time tS tS 60 100 120 s
TSmin to TSmax
Ramp-up rate to peak*) 2 3 K/s


TSmax to TP
Liquidus temperature TL 217 °C
Time above liquidus temperature tL 80 100 s
Peak temperature TP 245 260 °C
Time within 5 °C of the specified peak tP 10 20 30 s
temperature TP - 5 K
Ramp-down rate* 3 6 K/s
TP to 100 °C
Time 480 s
25 °C to TP

All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range


8 Version 1.0 | 2020-09-28

 SFH 4737
 

Taping 7)




9 Version 1.0 | 2020-09-28

 SFH 4737
 

Tape and Reel 8)

Reel Dimensions
A W Nmin W1 W2 max Pieces per PU

180 mm 8 + 0.3 / - 0.1 mm 60 mm 8.4 + 2 mm 14.4 mm 2000




10 Version 1.0 | 2020-09-28

 SFH 4737
 

Barcode-Product-Label (BPL)

Dry Packing Process and Materials

Moisture-sensitive label or print

N s E RS
L
E

re
V
E

tiv
If

e
la ared ag
fr
in pa
L

hu

ck
an

m
id
k,
bl r co
ba

e
de
e be
sela

ity

30
l

˚C
).
(R

/6
R
H

0%
.
Barcode label
TIO
<
_
in IV O % k
IT T of
nta
90 to rs
S C < d ea s ). rs
N U ou
U coSEND d te (p on ,
or de H rs
iti ou
an bjec ng


ou rs
Ais bUagRMEICO ˚C co 72 H
si nd 5 H ou
˚C su es te 48
CThIS co ± e H
y da e 24 6
T E 40 be oc
or ˚C tim e
S < ill pr). ith or tim
O w nt ct 23 w tim e
M TO
at fa lo or
s at le ˚C at at e. al F lo or tim
P th th va l tic F lo or
O on s ui be if: read
ur F lo
m ce eq la lo
w ed
id
en l 4 5 F
vi g, n oc ve l
24 or de be in pr is 5a
de , e nt whe Le ve l 6
te
g: , w
r
co
se ou ke e Le ve l
da Le ve
ba ed flo
ba e m % ba al st
ur e
en re r ur e Le
ed e e tim re> 10 fo se oi st ur e
al op se fo M oi st ur
se is as or . is 33 k, M oi st
k, lo H bed
in g ph , -0 an M oi
e r- an in F R ng ar D bl M
ba
lif is po If bl ith % ki r C. S
T (if r
lf th va p. w 10 ba to et J- ea r ks
he r w, m <
_ m Y ea rs
S te ed iredicat d, EC 1 Y ee
1.
fte
A flody
nt
d
at
qu In no ire D > 1 W Hou
ou e 4 8
2. re
bo M re reity is qu/JE e
to es id 2b re C : tim e 16
a) S tim
ic is IP ed loor tim e
b) ev Humor e or
en F
D 2a king nc te F
lo or tim
a) op lo or
3. b) ba re da e F lo
If fe
al l 1 2 F
re tim ve l
4. se d l 2a
Le ve 3
ag an e Le ve l
B e ur e Le ve
at st ur e
D Le
oi st ur e
M oi st ur
M oi st
M oi
M

M
RA
OS

Humidity indicator
Barcode label
Do not eat.
Avoid metal contact.
Discard if circles overrun.
bag opening.
Please check the HIC immidiately after

check dot WET

Comparator

bake units
examine units, if necessary 15%
If wet,

bake units
examine units, if necessary 10%
If wet,

change desiccant
parts still adequately dry. 5%
If wet,

MIL-I-8835
Humidity Indicator

Desiccant
AM
OSR

OHA00539


11 Version 1.0 | 2020-09-28

 SFH 4737
 

Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of
lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this
data sheet falls into the class moderate risk (exposure time 0.25 s). Under real circumstances (for exposure
time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye ex-
ists from these devices. As a matter of principle, however, it should be mentioned that intense light sources
have a high secondary exposure potential due to their blinding effect. When looking at bright light sources
(e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoy-
ance, visual impairment, and even accidents, depending on the situation.
Subcomponents of this device contain, in addition to other substances, metal filled materials including silver.
Metal filled materials can be affected by environments that contain traces of aggressive substances. There-
fore, we recommend that customers minimize device exposure to aggressive substances during storage,
production, and use. Devices that showed visible discoloration when tested using the described tests above
did show no performance deviations within failure limits during the stated test duration. Respective failure
limits are described in the IEC60810.

Handling:
Solvents, water, liquids, non-conductive plastics and glues are not allowed near the device, because sol-
vents and other liquids could emerge and damage the product.
For further application related information please visit www.osram-os.com/appnotes




12 Version 1.0 | 2020-09-28

 SFH 4737
 

Disclaimer
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version on the OSRAM OS website.

Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of
transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we
shall have to invoice you for any costs incurred.

Product and functional safety devices/applications or medical devices/applications

OSRAM OS components are not developed, constructed or tested for the application as safety relevant
component or for the application in medical devices.
OSRAM OS products are not qualified at module and system level for such application.

In case buyer – or customer supplied by buyer – considers using OSRAM OS components in product safety
devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales
partner of OSRAM OS immediately and OSRAM OS and buyer and /or customer will analyze and coordi-
nate the customer-specific request between OSRAM OS and buyer and/or customer.




13 Version 1.0 | 2020-09-28

 SFH 4737
 

Glossary
1)
Total radiant flux: Measured with integrating sphere.
2)
Forward Voltage: The forward voltages are measured with a tolerance of ±0.1 V.
3)
Radiant intensity: Measured at a solid angle of Ω = 0.01 sr
4)
Thermal resistance: junction - soldering point, of the device only, mounted on an ideal heatsink (e.g.
metal block)
5)
Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es, the typical data or calculated correlations of technical parameters can only reflect statistical figures.
These do not necessarily correspond to the actual parameters of each single product, which could dif-
fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be changed without any further notice.
6)
Testing temperature: TA = 25°C (unless otherwise specified)
7)
Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.
8)
Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.




14 Version 1.0 | 2020-09-28

 SFH 4737
 

Revision History
Version Date Change

1.0 2020-09-28 Initial Version




15 Version 1.0 | 2020-09-28

 SFH 4737
 

Published by OSRAM Opto Semiconductors GmbH

Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.


16 Version 1.0 | 2020-09-28