Jeep Renegade Manual

COP RENEGADE GB LUM 10/09/14 08:50 Pagina 1
ENGLISH
OWNER HANDBOOK
WHY CHOOSING
GENUINE SPARE PARTS
We really know the vehicle because we invented, designed and produced it:
we know every minor detail of it. At the Jeep authorised workshops you will find technicians
directly trained by us, providing quality and professionalism needed for all service operations.
Jeep workshops are always close to you for the regular servicing operations,
season checks and practical recommendations by our experts.
This Owner Handbook is intended to show the vehicle's operating conditions.
For the enthusiast user who wants to have insights, curiosities and detailed information about the characteristics and functions With genuine parts your new vehicle will maintain long-term reliability,
of the vehicle, Jeep gives the opportunity to consult a dedicated section which is available in electronic format. comfort and performance: this is why you bought it.
We recommend to always ask for genuine spare parts for the components used on our vehicles,
ONLINE VEHICLE OWNER HANDBOOK because they originate from our steady commitment in research and development
of highly innovative technologies.
The following symbol is reported within the text of the Owner Handbook, next to the subjects for which details are provided.
For these reasons it is advisable to use genuine spare parts,
Go to the www.mopar.eu/owner website and access your personal area.
because they are the ones specifically designed for your vehicle.
The “Maintenance and care” page includes all the information about your vehicle and the link to access eLUM, where you will find
all the details of the Owner Handbook.
The eLUM website is free and will allow you, among many other things, to easily consult the on-board documents
of all the other vehicles of the Group.
Have a nice reading and happy motoring!
Dear Customer,
We would like to congratulate and thank you for choosing a Jeep.
We have written this handbook to help you get to know all the features of your vehicle and use it in the best possible way. This vehicle
is intended for daily use as well as for specific uses, so even routes and uses not suitable for traditional vehicles on the market can
be tackled. Ride and handling capabilities are different from most other vehicles, both on and off road; we thus recommend you to
spend all the time necessary to know the vehicle dynamics.
Here you will find information, advice and important warnings regarding use of your vehicle and how to achieve the best performance
from the technical features of your Jeep.
You are advised to read it right through before taking to the road for the first time, to become familiar with the controls and above all
with those concerning brakes, steering and gearbox; at the same time, you can understand the vehicle behaviour on different road
surfaces.
This document also provides a description of special features and tips, as well as essential information for the safe driving, care and
maintenance of your Jeep over time.
After reading it, you are advised to keep the handbook inside the vehicle, for an easy reference and for making sure it remains onboard
the vehicle should it be sold.
In the attached Warranty Booklet you will also find a description of the Services that Jeep offers to its customers, the Warranty
Certificate and the detail of the terms and conditions for maintaining its validity.
We are sure that these will help you to get in touch with and appreciate your new vehicle and the service provided by the people at
Jeep.
Enjoy reading. Happy motoring!
WARNING
This Owner Handbook describes all Jeep Renegade versions. Options, equipment dedicated to specific Markets or
versions are not explicitly indicated in the text: as a consequence, you should only consider the information which is
related to the trim level, engine and version that you have purchased. Any content introduced throughout the production
of the model, outside the specific request of options at the time of purchase, will be identified with the wording (where
provided).
All data contained in this publication are intended to help you use your vehicle in the best possible way. Chrysler Group
LLC effort aims at a constant improvement of the vehicles produced. For this reason it reserves the right to make
changes at the model described for technical and/or commercial reasons.
For further information, contact a Jeep Dealership.
READ THIS CAREFULLY
REFUELLING
Petrol engines: only refuel with unleaded petrol with octane rating (RON) not less than 95 in compliance with the European specification
EN228. Do not use petrol containing methanol or ethanol E85. Using these mixtures may cause misfiring and driving issues, as well as
damage fundamental components of the supply system.
Diesel engines: refuel only with diesel fuel conforming to the European specification EN590. The use of other products or mixtures may
damage the engine beyond repair and consequently invalidate the warranty, due to the damage caused.
For further details on the use of the correct fuel see paragraph "Refuelling the vehicle" in the "Starting and driving" chapter.
STARTING THE ENGINE

Versions with manual gearbox (petrol engines): make sure that the parking brake is engaged; set the gear lever to neutral, fully depress
the clutch pedal without pressing the accelerator, then bring the ignition device to AVV or press the ignition device button and release the
key or the button as soon as the engine has started.
Versions with manual gearbox (diesel engines): make sure that the parking brake is engaged; set the gear lever to neutral, fully depress
the clutch pedal without pressing the accelerator, then bring the ignition device to MAR and wait for warning lights and to switch
off. Bring the ignition device to AVV or press the ignition device button and finally release the key or the button as soon as the engine has
started.
Versions with automatic transmission: make sure that the parking brake is engaged and that the gear lever is in P (Park) or N (Neutral),
fully depress the brake pedal, then bring the ignition device to AVV or press the ignition device button.
PARKING ON FLAMMABLE MATERIAL

The catalytic converter develops high temperatures during operation. Do not park the vehicle on grass, dry leaves, pine needles or other
flammable material: fire hazard.
RESPECTING THE ENVIRONMENT

The vehicle is fitted with a system that carries out a continuous diagnosis of the emission-related components in order to help protect the
environment.
ELECTRICAL ACCESSORIES
If, after buying the vehicle, you decide to add electrical accessories (with the risk of gradually draining the battery), contact a Jeep Dealership.
They can calculate the overall electrical requirement and check that the vehicle's electric system can support the required load.
SCHEDULED SERVICING
Correct maintenance of the vehicle is essential for ensuring that it maintains its performance and its safety features, its environmental
friendliness and low running costs unchanged in time.
SYMBOLS
Some vehicle components have coloured labels whose symbols indicate precautions to be observed when using this
component.
A plate summarising these symbols can also be found under the bonnet.
ROLL OVER WARNING

The risk of rolling over for off-road vehicles is remarkably higher than for any other type of vehicle. This vehicle has a higher
ground clearance and has a higher centre of gravity compared to many other vehicles for transporting passengers, so that it
allows a better performance to be reached in a wide range of off-road applications.
Anyway, a dangerous driving style can increase the risk of losing control of the vehicle.
The vehicle is more subject to the risk of rolling over because of the higher centre of gravity should the driver lose its control.
Therefore, avoid tight curves or other unsafe driving conditions that may lead to losing the vehicle control. Failure to comply
with these precautions may cause accidents, vehicle rolling over and severe or fatal injuries. Drive carefully.
The main cause for severe or fatal injuries is failing to wear driver and passenger seat belts. In the event of rolling over, a
passenger not wearing the seat belt is much more likely to be fatally injured than a passenger wearing it correctly. Always fasten
the seat belts.
VEHICLE CHANGES/ALTERATIONS
IMPORTANT Any change or alteration of the vehicle might seriously affect its safety and road holding, thus causing accidents,
in which the occupants could even be fatally injured.
USE OF THE OWNER HANDBOOK
OPERATING INSTRUCTIONS
Each time direction instructions (left/right or forwards/backwards) about the vehicle are given, these must be intended as
regarding an occupant in the driver's seat. Special cases not complying with this rule will be properly specified in the text.
The figures in the Owner Handbook are provided by way of example only: this might imply that some details of the image do
not correspond to the actual arrangement of your vehicle. In addition, the Handbook has been conceived considering vehicles
with steering wheel on the left side; it is therefore possible that on vehicles with steering wheel on the right side, some controls
position or construction is not exactly mirror-like with respect to the figure.
To identify the chapter with the information needed you can consult the index at the end of this Owner Handbook.
Chapters can be rapidly identified with dedicated graphic tabs, at the side of each odd page. A few pages further there is a key
for getting to know the chapter order and the relevant symbols in the tabs. There is anyway a textual indication of the current
chapter at the side of each even page.
WARNINGS AND PRECAUTIONS
While reading this Owner Handbook you will find a series of WARNINGS to prevent procedures that could damage your
vehicle.
There are also PRECAUTIONS that must be carefully followed to prevent incorrect use of the components of the vehicle,
which could cause accidents or injuries.
Therefore all WARNINGS and PRECAUTIONS must always be carefully followed.
WARNINGS and PRECAUTIONS are recalled in the text with the following symbols:
personal safety;
vehicle safety;
environmental protection.
NOTE These symbols, when necessary, are indicated besides the title or at the end of the line and are followed by a number.
That number recalls the corresponding warning at the end of the relevant section.
GETTING TO KNOW YOUR CAR
In-depth knowledge of your new vehicle THE KEYS....................................... 7
starts here. IGNITION DEVICE ........................... 8
The booklet that you are reading simply SENTRY KEY® ............................... 10
and directly explains how it is made
and how it works. ALARM ........................................... 11
That’s why we advise you to read it DOORS........................................... 11
seated comfortably on board, so that SEATS ............................................ 14
you can see immediately what is
described here for yourself. HEAD RESTRAINTS........................ 16
STEERING WHEEL ......................... 17
REAR VIEW MIRRORS.................... 18
EXTERIOR LIGHTS ......................... 19
INTERIOR LIGHTS .......................... 21
WINDSCREEN/REAR WINDOW
WIPER ............................................ 22
CLIMATE CONTROL ...................... 24
ELECTRIC WINDOWS .................... 28
ELECTRIC SUN ROOF.................... 29
MYSKY SUN ROOF ........................ 31
BONNET ......................................... 33
LUGGAGE COMPARTMENT........... 34
6
THE KEYS Pressing button again or at the
end of the 90 seconds, the lights
switched on previously will go off (if the
KEY WITH REMOTE parking light function was already
CONTROL active it will remain so). If, when 90
1) 1) 1)
seconds have passed, button is
Metal insert A fig. 1 of the key operates: pressed, the main beam headlights and
❒ the ignition device; the side lights will stay on for further
30 seconds.
❒ the door lock.
2 J0A0315C REQUEST FOR
ADDITIONAL KEYS
Briefly press button : unlocking of
Should a new key with remote control
doors and luggage compartment, timed
or a new electronic key be necessary,
switching-on of internal lights and
go to a Jeep Dealership, taking an
double flashing of direction indicators
ID document and the vehicle ownership
(where provided).
documents.
Briefly press button : lock of doors
and luggage compartment with roof
lights off and single flash of direction
indicators (where provided). WARNING
1 J0A0181C
Press button : remote opening of
Press button B to open/close the metal the luggage compartment (to open the 1) Press button B only with the key away
insert. luggage compartment press the button from your body, especially your eyes and
from objects which could get damaged
ELECTRONIC KEY twice in quick succession). (e.g. your clothes). Do not leave the key
(versions with "Keyless Enter-N-Go" Press button : remote switching unattended, to prevent people, especially
system) on of the main beam headlights, for children, from inadvertently pressing the
a maximum of 90 seconds. button.
On versions equipped with "Keyless
Enter-N-Go" system, the vehicle
features an electronic keyfig. 2, of
which two copies are provided.
7
IGNITION DEVICE VERSIONS WITH

ELECTRONIC KEY
WARNING (Keyless Enter-N-Go system)
2) 3) 6) 7)
VERSIONS WITH To activate the ignition device the

1) The electronic components inside the
MECHANICAL KEY electronic key must be inside the
key may be damaged if the key is
subjected to strong shocks. In order to The key can be turned to three different passenger compartment. The ignition
ensure complete efficiency of the positions fig. 3: device fig. 4 activates also if the
electronic devices inside the key, it should electronic key is inside the luggage
never be exposed to direct sunlight. ❒ STOP: engine off, key can be
compartment or on the parcel shelf.
removed, steering column locked (with
key removed). Some electrical devices
WARNING (e.g. central door locking system,
alarm, etc.) are still available;
1) Remote control used batteries may be ❒ MAR: driving position. All electrical
harmful to the environment if not disposed devices are available;
of correctly. They must be disposed of ❒ AVV: engine start-up.
as specified by law in the special
containers or taken to a Jeep Dealership,
which will take care of their disposal.
4 J0A0022C
The ignition device can enter the

following states:
❒ STOP: engine off, steering column
locked. Some electrical devices (e.g.
central door locking system, alarm,
etc.) are still available;
3 J0A0021C
❒ MAR: driving position. All electrical
NOTE On versions with automatic devices are available. This state can be
transmission the ignition key can only entered by pressing the ignition device
be removed when the gear lever is at P button once, without pressing the brake
(Park). pedal (versions with automatic
transmission) or the clutch pedal
(versions with manual gearbox);
❒ AVV: engine start-up.
8
Starting the engine (with electronic STEERING LOCK
key battery run down): rest the Engagement WARNING
rounded edge of the electronic key (the
side opposite the metal insert) on the Versions with mechanical key: with the
device at STOP, remove the key and 2) If the ignition device has been tampered
button of the ignition device and press
turn the steering wheel until it locks. with (e.g. an attempted theft), have it
this button through the electronic key. checked over by a Jeep Dealership before
Switching off the engine (with IMPORTANT If the ignition key has driving again.
electronic key battery run down): been moved from the MAR to the
3) Always take the key with you when you
hold down the button of the ignition STOP position, the steering lock cannot leave your vehicle to prevent someone
device or press it three times in a row engage until the key is removed from from accidentally operating the controls.
the ignition device. Remember to engage the electric parking
within a few seconds.
Versions with electronic key: the brake. Never leave children unattended
NOTE The ignition device does NOT in the vehicle.
activate if the electronic key is inside steering lock engages when the driver
4) It is absolutely forbidden to carry out any
the luggage compartment and this door is opened, with the ignition device
after-market operation involving steering
is open. button at STOP and speed below 3 system or steering column modifications
NOTE With the ignition device at MAR, km/h. (e.g. installation of anti-theft device) that
could adversely affect performance and
if 30 minutes pass with the vehicle Disengagement safety, invalidate the warranty and also
stationary (versions with manual result in the vehicle not meeting type-
Versions with mechanical key: slightly
gearbox) or with the gear lever at P approval requirements.
moving the steering wheel, turn the key
(Park) (versions with automatic 5) Never extract the mechanical key while
to the MAR position.
transmission) and the engine off, the the vehicle is moving. The steering wheel
Versions with electronic key: the will automatically lock as soon as it is
ignition device will automatically move
steering lock disengages when the turned. This also applies to cases in which
to the STOP position.
ignition device is pressed and the the vehicle is towed.
For more information on the engine
electronic key is recognised. 6) ALWAYS engage the parking brake
start-up, see the description in the before leaving the vehicle. On versions
4) 5)
"Starting the engine" paragraph, in the equipped with automatic transmission,
"Starting and driving" chapter. move the gear lever to STOP (Park) and
press the ignition device to set it to STOP.
When leaving the vehicle, always lock all
the doors by pressing the dedicated button
on the handle.
9
7) On versions equipped with Keyless SENTRY KEY® IRREGULAR OPERATION

Enter-N-Go system, do not leave the
electronic key inside or near the vehicle or The Sentry Key® system, prevents If, during starting, the key code is not
in a place accessible to children. Do not unauthorised use of the vehicle, disa- correctly recognised, the icon is
leave the vehicle with the ignition device in bling engine starting. displayed on the instrument panel (see
the MAR position. A child could operate The system does not need to be the instructions in the "Warning lights
the electric windows, other controls or
enabled/activated: operation is and messages" paragraph, "Knowing
even start the vehicle.
automatic, regardless of the fact that the instrument panel" chapter). This
the vehicle's doors are locked or condition leads to the engine switching
unlocked. off after 2 seconds. In this case, bring
When the ignition device is taken to the ignition device to STOP and then to
MAR, the Sentry Key® system identi- MAR; if it is still blocked, try with the
fies the code transmitted by the key. If other keys provided. If it is still not
the code is recognised as valid, the possible to start the engine, contact a
Sentry Key® system enables engine Jeep Dealership.
starting.
If the icon is displayed while driving,
When the ignition device is brought
this means that the system is running
back to STOP, the Sentry Key® sys-
tem deactivates the control unit control- a self-diagnosis (e.g. due to a voltage
ling the engine, thus preventing its drop). If the displaying is still on,
starting. contact a Jeep Dealership.
For the correct engine starting
procedures, see the instructions in the
"Starting the engine" paragraph,
"Starting and driving" chapter.
10
ALARM TURNING THE ALARM DOORS
OFF
Press the button.
Activation of the alarm triggers the LOCKING/UNLOCKING
acoustic warning and the direction IMPORTANT The alarm does not switch DOORS FROM THE
indicators. off when the central opening is INSIDE
IMPORTANT The alarm is adapted to activated using the metal insert in the 8)
meet requirements in various countries. key. If all doors are closed properly, they will
DISABLING THE ALARM automatically be locked once the
SWITCHING ON THE vehicle has exceeded 20 km/h
ALARM To completely deactivate the alarm (e.g. ("Autoclose" function).
With the doors, bonnet and tailgate during a long period of vehicle Central locking/unlocking: press the
closed and the ignition device turned to inactivity), close the doors by turning button on the driver side door panel
STOP, point the key with remote control the metal insert of the key with remote trim fig. 6 or on the passenger side
(or electronic key) towards the vehicle control in the door lock. door to lock the doors. With doors
and press and release button . locked, press button to unlock them.
Except for specific markets, the system IMPORTANT If the batteries of the key
emits a visual and acoustic signal and with the remote control run out or
enables door locking. the system fails, the alarm can
With the alarm on, warning light A fig. 5 be switched off by placing the ignition
flashes on the instrument panel. device to MAR. On versions equipped
with Keyless Enter-N-Go system,
manually open the doors by placing the
metal insert that is in the key in the
driver side door pawl and then place
the same electronic key on the ignition
device. 6 J0A0079C
Manual locking/unlocking: use

lever A fig. 7 on the front door handle.
Position 1: door unlocked
5 J0A0191C Position 2 : door locked
11
Door unlocking from outside: with

the doors closed, press the button
on the key or fit and then turn the metal
insert (located inside the key) in the
driver side door lock.
PASSIVE ENTRY
3)
The Passive Entry system can identify

the presence of an electronic key near
8 J0A0042C
the doors and the tailgate. Thanks to it,
you can unlock/lock the doors (or the Driver side door emergency
tailgate) without having to press any opening
button on the electronic key. If the electronic key does not work (e.g.
If the system identifies that the because its battery does not work
electronic key found is valid, the owner anymore, or the vehicle battery is flat),
of the key can simply grasp one of the emergency metal inside the key can
the front handles to release the alarm be used to operate the lock unlocking
and unlock the door and tailgate on the driver side door.
opening mechanism. Removing the metal insert: operate
7 J0A0027C After the unlocking, pulling the opening on A device fig. 9 and extract, pulling
handle all doors can be opened towards outside, the metal insert B.
LOCKING/UNLOCKING
DOORS FROM THE depending on the mode set through the Then fit the metal insert in the driver
OUTSIDE display menu or the Uconnect system. side door lock and rotate it to release
You can also access the luggage the door lock.
2)
compartment by pressing the Door locking: make sure that you
Door locking from outside: with the dedicated opening button A fig. 8. have the electronic key and are within
doors closed, press the button on NOTE Ensure that you always have the the 1.5-metre operating range of the
the key or fit and then turn the metal electronic key with you (e.g. in your driver or passenger side door handle.
insert (located inside the key) in the pocket) so that the system recognises it Press button A fig. 10 on the handle:
driver side door lock. and lets you enter the passenger this will lock all doors and the tailgate.
compartment and start the engine. Door locking will activate the alarm
as well (where provided).
12
❒ position : device not engaged
(door may be opened from the inside).
9 J0A0038C 11 J0A0023C
DEAD LOCK
(where provided)
9)
This inhibits the operation of the interior
door handles and the door locking/
unlocking button.
Activating the device: the device is
enabled on all the doors by quickly
double-pressing the button on the
10 J0A0040C key.
Deactivating the device: press button
IMPORTANT After pressing the "door on the key with remote control or 12 J0A0041C
locking" button, wait two seconds place the ignition device to MAR.
before the doors can be unlocked again The device remains engaged even if the
using the door handle. It is therefore CHILD SAFETY DEVICE
doors are electrically unlocked.
possible to check whether the vehicle is 10)
locked correctly by pulling the door This system prevents the rear doors IMPORTANT The rear doors cannot be
handle within 2 seconds. The doors will from being opened from the inside. opened from the inside when the child
not be unlocked. The device A fig. 12 can only be lock device is engaged.
Tailgate door lock locking: with engaged with the doors open:
tailgate closed press button A fig. 11. ❒ position : device engaged (door
locked);
13
3) The operation of the recognition system SEATS

depends on various factors, such as, for
WARNING example, any electromagnetic wave FRONT SEATS WITH
interference from external sources (e.g. MANUAL ADJUSTMENT
mobile phones), the charge of the battery
8) NEVER leave children unattended inside 11) 4)
in the electronic key and the presence
the vehicle, let alone leave the vehicle Longitudinal adjustment: lift the lever
of metal objects near the key or the vehicle.
with the doors unlocked in a place that
children can access easily. Children may
In these cases it is still possible to unlock A fig. 13 and push the seat fully forward
the doors by using the metal insert in or backward.
seriously, or even fatally, injure themselves.
the electronic key (see description on the
Also ensure that children do not
inadvertently operate the electric parking following pages).
brake, the brake pedal or the automatic
transmission lever.
9) Always use this device when carrying
children. After engaging the device on both
rear doors, check for proper engagement
by trying to open a rear door with the
internal handle.
10) Once the Dead Lock device has been
actuated, doors cannot be opened from
inside; for this reason, make sure there are 13 J0A0043C
no persons left inside the vehicle.
12)
IMPORTANT Carry out the adjustment

WARNING while sitting on the seat involved (driver
side or passenger side).
2) Make sure to take the key with you once Height adjustment: move lever B fig.
a door or the tailgate is locked, to prevent 13 upwards or downwards to achieve
locking the same key inside the vehicle.
Once it has been left inside, the key can be
the required height.
collected only using the second key Backrest angle adjustment: move
supplied with the vehicle. lever C fig. 13 to adjust the backrest
angle, accompanying it with the
movement of the torso (operate the
lever until the desired position is
reached, then release it).
14
Electric lumbar adjustment: when Two heating levels can be selected:
the ignition device is at MAR, press "minimum heating" (one orange LED lit
button A fig. 14 to adjust the lumbar on the buttons) / "maximum heating"
area support, until getting the maximum (two orange LEDs lit on the buttons).
comfort while driving. After selecting one heating level, you
need to wait for a few minutes until
warm air flows into the compartment.
IMPORTANT To preserve the battery

charge, this function cannot be
15 J0A0044C
activated when the engine is off.
Backrest angle adjustment: press REAR SEATS
switch B forwards or backwards to
Partial extension of the
adjust the backrest angle. luggage compartment (1/3
Electric lumbar adjustment: use the or 2/3)
14 J0A0399C joystick C to actuate the lumbar area
6)
device until getting top comfort while Proceed as follows:
ELECTRICALLY
ADJUSTED FRONT SEATS driving.
❒ remove the parcel shelf, if present;
5)
FRONT SEAT ELECTRIC ❒ completely lower the rear seat head
The control buttons (on the outside of HEATING
restraints;
the seat) can be used to adjust the With ignition device at MAR, press the ❒ move the seat belt to the side,
height, the lengthwise position in fig. 16 buttons. making sure that it is fully extended and
relation to the vehicle and the angle of
not twisted;
the backrest.
Height adjustment: use the front or ❒ actuate lever A fig. 17 to tilt the left or
rear part of the switch A fig. 15 to right part of the backrest: it will
modify the height and/or the angle of automatically tilt forward. If necessary,
the seat cushion. accompany the backrest during the
Longitudinal adjustment: press initial stage of tilting. When you lift the
switch A forwards or backwards to lever, you will see a red mark.
move the seat in the corresponding
direction.
16 J0A0047C
15
13) Make sure that the backrests are HEAD RESTRAINTS

correctly secured on both sides ("red
marks" not visible) to prevent it from ADJUSTMENTS
moving forward in the event of sharp
14)
braking, causing injuries to occupants.
Upwards adjustment: raise the head
restraint until it clicks into place.
WARNING Downwards adjustment: press
button A fig. 18 and fig. 19 and lower
4) The fabric upholstery for the seats has
the head restraint.
been designed to withstand long-term
17 J0A0045C
wear deriving from normal use of the
vehicle. Nevertheless, some precautions
Repositioning the backrests are required. Avoid prolonged and/or
Move the seat belts to the side, excessive rubbing involving clothing
making sure that they are correctly accessories such as metal buckles,
bosses, Velcro strips and the like, which,
extended and not twisted. by applying a high pressure on the fabric in
Lift up the backrests and push them a limited area, could cause it to break,
back until a click is heard for both thereby damaging the upholstery.
hooking mechanisms, at the side. Make 5) Do not arrange objects beneath the
sure that "red marks" on levers A fig. electrically adjustable seat and do not 18 J0A0057C
17 are not visible any more. The "red impede its movement, since the controls
may be damaged. They may also restrict
mark" means that the backrest was not the seat travel.
hooked properly. 6) Before tilting the backrest, remove any
13) objects laying on the seat.
WARNING
11) Any adjustment must be performed

with the vehicle at a standstill.
12) After releasing the adjustment lever, 19 J0A0058C
always check that the seat is locked on the
guides by trying to move it back and forth.
If the seat is not locked into place, it may
unexpectedly slide and cause the driver to
lose control of the vehicle.
16
REAR HEAD RESTRAINTS STEERING WHEEL
(removal)
15) 16)
Proceed as follows to remove the head
restraints: ADJUSTMENTS
❒ raise the head restraints to their The steering wheel can be adjusted
maximum height; both in height and in depth.
❒ press buttons A and B fig. 19 at the To adjust, move lever A fig. 20
side of the two supports, then remove downwards to position 1, then adjust
the head restraints by pulling them the steering wheel to the most suitable
upwards. position and lock it in position by 21 J0A0048C
moving lever A to position 2.
WARNING WARNING
14) The head restraints must be adjusted 15) Any adjustment of the steering wheel
so that the head, rather than the neck, position must be carried out only with
rests on them. Only in this case can they the vehicle stationary and the engine
protect your head correctly. turned off.
16) It is absolutely forbidden to carry out
any after-market operations involving
steering system or steering column
modifications (e.g. installation of anti-theft
20 J0A0056C device) that could adversely affect
performance and safety, invalidate the
ELECTRIC STEERING warranty and also result in the vehicle not
WHEEL HEATING meeting type-approval requirements.
With ignition device at MAR, press
button on the dashboard fig. 21.
When the function is enabled, the LED
on the button switches on.
IMPORTANT If this function is activated

with engine off the battery may run
down.
17
REAR VIEW To adjust the selected mirror, press

MIRRORS button B fig. 24 in the four directions
shown by the arrows.
INTERIOR MIRROR
The mirror is fitted with a safety device IMPORTANT Once adjustment is
that causes its release in the event of complete, rotate device A fig. 24 to
a violent impact with the passenger. position 0 to prevent accidental
Operate lever A fig. 22 to adjust the movements.
mirror into two different positions:
Electrical mirror folding
normal or anti-glare.
23 J0A0059C
To fold the mirrors, press button C fig.
DOOR MIRRORS 24. Press the button again to restore
the mirrors to the driving position.
Electric adjustment WARNING The mirrors must always be
17) open while driving and should never
The mirrors can only be adjusted with be folded.
the ignition device at MAR.
Select the desired mirror using device A
fig. 24: WARNING
❒ device in position 1: left mirror
22 J0A0060C selected; 17) As the driver's door mirror is curved, it
may slightly alter the perception of
❒ device in position 2: right mirror
ELECTROCHROMIC distance.
INTERIOR MIRROR selected.
On some versions, an electrochromic
mirror is available, that can
automatically modify its reflecting action
to prevent dazzling the driver fig. 23
The electrochromic mirror has an
ON/OFF button to activate/deactivate
the electrochromic anti-glaring function.
24 J0A0061C
18
EXTERIOR LIGHTS AUTO FUNCTION DAYTIME RUNNING
(Dusk sensor) LIGHTS (DRL)
LIGHT SWITCH (where provided) "Daytime Running Lights"
Light switch A fig. 25, located on the (where provided)
This is an infrared LED sensor that
left side of the dashboard, controls works in conjunction with the rain 18) 19)
operation of headlights, side lights, sensor and is located on the With the ignition device turned to MAR
daytime running lights, dipped beam windscreen. It is able to detect and the light switch turned to position
headlights, fog lights, rear fog lights and variations in outside lighting based on O the daytime running lights are
instrument panel indicator and control the light sensitivity and adjusts the automatically activated; the other lights
button graphic lighting regulation. display Menu or the Uconnect™ and interior lighting remain off.
system. With the ignition device turned to STOP,
The higher the sensitivity, the lower the bring the light switch to position
amount of external light needed to to switch on the side lights, the
switch the lights on. instrument panel lights and to switch off
Function activation: turn the light the daytime running lights.
switch to AUTO. FOG LIGHTS
Function deactivation: turn the light (for versions/markets where provided)
switch to a position other than AUTO. With side lights and dipped beam
headlights on, press switch to
IMPORTANT This function can only switch on the fog lights.
25 J0A0062C be activated with the ignition device at To switch off the fog lights press the
MAR. switch again or turn it to position O.
The exterior lights can only be switched
on when the ignition device is at MAR. DIPPED BEAM REAR FOG LIGHT
The instrument panel and the various HEADLIGHTS
Press button to switch the light
controls on the dashboard will be lit up Turn the ignition switch to to switch
on/off.
when the exterior lights are switched on the side lights, the instrument panel
The rear fog light switches on only
on. lights and the dipped beam headlights.
when the dipped beam headlights or
The warning light switches on in
fog lights are switched on. The light
the instrument panel.
switches off by pressing button or
by switching off the main beam
headlights or the fog lights.
19
PARKING LIGHTS With main beam headlights on, the To deactivate the automatic function

These lights can be switched on with warning light on the instrument rotate the light switch ring nut to
ignition device at STOP or with key panel will come on at the same time. position .
removed, by moving the light switch to DIRECTION INDICATORS
position O and then to position . Bring left lever A fig. 26 to the (stable)
The warning light switches on position:
in the instrument panel.
❒ upwards: activates the right direction
HEADLIGHTS OFF TIMER indicator;
Function activation: with lights on, ❒ downwards: activates the left
bring the ignition device to STOP. Then direction indicator.
switch off the headlights within 45
"Lane Change" function
seconds: timing will start when the light
switch is turned to O. 26 J0A0063C If you wish to signal a lane change,
place the left lever in the unstable
IMPORTANT To activate this functions The main beam headlights are
position for less than half a second. The
the headlights must be deactivated deactivated bringing the lever back to
direction indicator on the side selected
within 45 seconds after the ignition the central stable position. Warning light
will flash five times and then switch
device has been taken to STOP. switches off in the instrument
off automatically.
Function deactivation: this function is panel.
HEADLIGHT ALIGNMENT
deactivated by switching on the Automatic main beam ADJUSTMENT
headlights, the side lights or bringing headlights
the ignition device to MAR. If the Headlight alignment
This function is enabled with the display corrector
headlights are switched off before Menu or the Uconnect™ system,
ignition, they will go out normally. This device only works with the ignition
and with the light switch turned to
device at MAR and the dipped beam
MAIN BEAM HEADLIGHTS AUTO.
headlights on.
To activate the fixed main beam The first time the main beam headlights
To adjust rotate ring nut A fig. 27.
headlights push left lever A fig. 26 are activated (pushing the left lever),
the function is activated (green warning ❒ Position 0: one or two people on the
(vehicle travel direction). The light front seats;
switch must be turned to AUTO or light come on in the instrument
panel). ❒ Position 1: 4 passengers
.
The unstable position is activated by If the main beam headlights are actually ❒ Position 2: 4 passengers + load in
pulling the lever towards you. on, the blue warning light will also the luggage compartment
come on in the instrument panel.
20
INTERIOR LIGHTS
WARNING
FRONT COURTESY
18) The daytime running lights are an
LIGHTS
alternative to the dipped beam headlights
for driving in countries where it is Switch A fig. 28 is used to switch on/off
compulsory to have lights on during the the courtesy lights bulbs.
day; where it is not compulsory, the use of
daytime running lights is permitted.
Switch positions:
19) Daytime running lights cannot replace ❒ central position: lights C and E switch
27 J0A0064C
dipped beam headlights when driving at on/off when the doors are opened/
night or through tunnels. The use of closed;
❒ Position 3: driver + maximum daytime running lights is governed by the
permitted load stowed only in the highway code of the country in which
❒ pressed to the left (position OFF):
luggage compartment you are driving. Comply with legal lights C and E are always switched off;
requirements. ❒ pressed to the right (position ):
IMPORTANT Check the headlight lights C and D are always switched on.
alignment each time the weight of the The lights switch on/off gradually.
load transported changes. Switch B fig. 28 switches light C on/off.
INSTRUMENT PANEL AND Switch D fig. 28 switches light E on/off.
CONTROL BUTTON
GRAPHICS BRIGHTNESS
ADJUSTMENT
With side lights or headlights on, turn
ring nut B fig. 27 upwards to increase
light brightness of the instrument panel
and of the control button graphics, or
turn the ring nut downwards to
decrease it.
21
Move the stalk upwards (unstable

WINDSCREEN/REAR
WINDOW WIPER position) to activate the MIST function:
operation is limited to the time for which
WINDSCREEN the stalk is held in this position. When
WIPER/WASHER
released, the stalk will return to its
default position and the windscreen
20) 7) 8)
wiper will be automatically stopped.
This function is useful to remove small
This operates only with the ignition deposits of dust from the windscreen,
device at MAR. or morning dew.
IMPORTANT This function does not
activate the windscreen washer;
windscreen washer fluid will not
therefore be sprayed onto the
windscreen. To spray windscreen
washer fluid onto the windscreen, the
washing function must be used.
With ring nut A in position 1 or 2
, the windscreen wiper will
automatically adapt its operating speed
28 J0A0024C
29 J0A0071C to the speed of the vehicle.
Courtesy light timing Ring nut A fig. 29 can be set to the "Smart washing" function
On certain versions, to facilitate getting following positions: Pull the lever towards the steering
in/out of the vehicle at night or in windscreen wiper off. wheel (unstable position) to operate the
poorly-lit areas, two timed modes have windscreen washer.
1 intermittent operation (low
been provided. Keep the stalk pulled to activate both
speed)
❒ when getting into the vehicle; the windscreen washer jet and the
2 intermittent operation (high windscreen wiper with a single
❒ when getting out of the vehicle. speed); movement; the latter turns on
LOW continuous slow operation. automatically.
HIGH continuous fast operation. The wiper stops working three strokes
after the stalk is released. A further
stroke after approximately 6 seconds
completes the cycle.
22
RAIN SENSOR ❒ in synchronous mode (at half the
(where provided) speed of the windscreen wiper) when WARNING
This is located behind the interior rear the windscreen wiper is operating;
view mirror, in contact with the ❒ in continuous mode with reverse gear
7) Do not use the screen wiper to remove
windscreen and can detect the engaged and the control active. layers of snow or ice from the windscreen.
presence of rain and, consequently, Position 1 : intermittent operation In such conditions, the windscreen wiper
manage the cleaning of the windscreen (low speed). may be subjected to excessive stress
in accordance with the amount of Position 2 : continuous slow and the motor cut-out switch, which
prevents operation for a few seconds, may
water on the screen. operation. intervene. If operation is not subsequently
With reverse gear engaged and restored, even after the vehicle is restarted,
Activation/deactivation
windscreen wiper on, the rear window contact a Jeep Dealership.
9) 10)
wiper is activated in continuous mode. 8) Do not operate the windscreen wiper
By acting on the display menu or on the Pushing the stalk towards the with blades lifted from the windscreen.
Uconnect™ system you can dashboard (unstable position) will 9) Do not activate the rain sensor while
activate/deactivate the rain sensor. The activate the rear window washer jet. washing the vehicle in an automatic
sensor can also be deactivated by washing system.
Keep the stalk pushed for more than
bringing the ignition device to STOP. half a second to activate the rear 10) If ice is found on the windscreen, make
The activation of the sensor is signalled sure that the device was disconnected
window wiper as well. Releasing the properly.
by a "stroke" to show that the stalk will activate the smart washing
command has been acquired. function, as described for the
If the ignition device is moved to STOP windscreen wiper.
position, leaving the ring nut A fig. 29
in 1 or 2 , when the vehicle is Deactivation
next started (ignition device at MAR), Release the lever.
no wiping cycle occurs even if it rains.
REAR WINDOW
WIPER/WASHER WARNING
Activation
Turn ring nut B fig. 29 from position O 20) Make sure the device is switched off
whenever the windscreen must be
to position to operate the rear cleaned.
window wiper as follows:
❒ in intermittent mode when the
windscreen wiper is not operating;
23
CLIMATE CONTROL
GETTING TO KNOW YOUR CAR 2) .
MANUAL CLIMATE CONTROL SYSTEM

Controls
30 J0A0053C
A - fan activation/adjustment knob:

❒ 0 = fan off
❒ = fan speed (7 different speeds can be chosen)
B - air recirculation activation/deactivation button (LED on: internal air recirculation on / LED off: internal air recirculation off);
C - air temperature adjustment and MAX A/C function activation knob (to obtain maximum cooling of the passenger
compartment move the knob to the position marked by wording MAX A/C): blue section = cold air / red section = hot air
D - climate control system compressor on/off button;
24
E - air distribution knob:
air from central outlets and side vents
air from central outlets, side vents and front and rear footwell vents
air outlet from the front and rear footwell vents and a light air flow also from the side vents on the dashboard
air outlet from the front and rear footwell vents, to the windscreen, the side windows and a light air flow also at the side
vents on the dashboard
air outlet to the windscreen, the side windows and a light air flow also at the side vents on the dashboard
4 further intermediate positions are also possible in the 5 main distributions described above.
F - heated rear window on/off button and, where provided, door mirror electric heating;
IMPORTANT Do not affix stickers to the inside of the heated rear window over the heating filaments, to avoid damage that
might cause them to stop working properly.
IMPORTANT Internal air recirculation makes it possible to reach the required heating or cooling conditions more quickly
depending on the mode selected. Do not use the internal air recirculation function on rainy/cold days as it would considerably
increase the possibility of the windows misting.
Additional heater Note The power of the electric heater is

(where provided) modulated according to the battery
The additional heater ensures more voltage.
rapid passenger compartment heating.
It activates in cold weather conditions,
if the following conditions are verified: WARNING
❒ outside temperature low;
❒ engine coolant temperature low; 2) The system uses R1234YF coolant,
which does not pollute the environment in
❒ engine on; the event of accidental leakage. Under
❒ fan speed set at least to 1st speed; no circumstances use R134a and R12
fluids, which are incompatible with the
❒ knob C turned completely clockwise
components of the system.
to red section.
The heater is switched off when at least
one of the conditions above is no
longer verified.
25
AUTOMATIC DUAL ZONE CLIMATE CONTROL SYSTEM

Controls
31 J0A0054C
A - driver side temperature adjustment knob;

B - internal air recirculation on/off button;
C - climate control system compressor on/off button;
D - MAX-DEF function activation button (rapid defrosting/demisting of front windows);
E - climate control on/off button;
F - fan speed adjustment knob;
G - Fan speed indicator LED; (maximum fan speed = all LEDs lit; minimum fan speed = one LED lit);
H - air distribution selection buttons;
Air flow to the windscreen and front side window diffusers to demist/defrost them.
Air flow at central and side dashboard vents to ventilate the chest and the face during the hot season.
26
Air flow to the front and rear footwell diffusers. This air distribution setting heats the passenger compartment most quickly,
giving a prompt sensation of warmth.
+ Air flow distributed between footwell diffusers (hotter air) and central and side dashboard vents (cooler air). This
distribution setting is useful in spring and autumn on sunny days.
+ Air flow distributed between footwell diffusers and windscreen and front side window defrosting/demisting diffusers.
This distribution setting allows the passenger compartment to be warmed up efficiently and prevents the windows
from misting up.
+ Air flow distribution between windscreen demisting/defrosting diffusers and side and central dashboard vents. This
allows air to be sent to the windscreen in conditions of strong sunlight.
+ + Air flow distribution to all diffusers on the vehicle.
I - heated rear window on/off button; (where this function is provided, pressing the button also activates demisting/defrosting of
the door mirrors);
L - passenger side temperature adjustment knob;
M - SYNC function activation button (alignment of set temperatures) driver/passenger side;
N - AUTO function activation button (automatic operation).
In AUTO mode, the climate control NOTES When the Stop/Start system is on
system automatically manages air (engine off and vehicle at a standstill),
distribution (the LEDs on buttons H are The automatic climate control manages the automatic recirculation
off). When set manually, the air the Stop/Start system (engine off and management is turned off always taking
distribution is shown by the LEDs on vehicle at a standstill) in order to air in from outside, to reduce the
the selected buttons. guarantee sufficient comfort inside the probability of the windows misting up
In combined function mode the relevant vehicle. In particularly severe climate (as the compressor is off).
function is enabled simultaneously conditions it is recommended to limit
with those already set by pressing the the use of the Stop/Start system to
corresponding button. If a button prevent the compressor from
whose function is already active is continuously switching on and off, with
pressed, its operation is cancelled and consequent rapid misting of the
the corresponding LED switches off. windows and accumulation of humidity
To restore automatic control of the with unpleasant smells in the passenger
air distribution after a manual selection, compartment.
press the AUTO button.
27
ELECTRIC WINDOWS ❒ B: right front window opening/ Window closing

closing. "Continuous automatic" Lift the buttons to close the desired
ELECTRIC WINDOWS
operation during window opening/ window.
21) closing stage and anti-pinch system The window closing stage occurs
They operate with the ignition device at activated.
MAR and for nearly 3 minutes after following the same logic described for
❒ C: enabling/disabling of rear door the opening stage, for the front door
the ignition device switches to STOP (or
electric window controls; windows only.
also after the mechanical key has
been extracted, for vehicles equipped ❒ D: left rear window opening/closing (if The rear door windows can only be
with mechanical key with remote present). "Automatic continuous" closed "in stages".
control). When one of the front doors is operation during window opening/
Front window anti-pinch
opened this operation is disabled. closing, manual electric operation safety device
during window closing; (where provided)
Driver side front door ❒ E: right rear window opening/closing
controls This safety system can recognise the
(if present). "Automatic continuous" presence of any obstacle during the
The buttons are located on the door operation during window opening/ window closing movement. If this
panel trim. All windows can be closing, manual electric operation occurs, the system stops the window's
controlled from the driver side door during window closing. movement and reverts it by a few
panel fig. 32.
Window opening centimetres, depending on its position.
The anti-crush safety function is
Push the buttons to open the desired
activated both during the manual and
window.
the automatic operation of the window.
When any of the opening buttons on
front or rear doors is pressed briefly, the Electric window system
window moves in stages; if the button initialisation
is held down, "continuous automatic" If power supply is interrupted, the
operation is activated. electric window automatic operation
If the button is pressed again, the must be reinitialised.
window will stop in the desired position. The initialisation procedure described
32 J0A0078C
below must be carried out with the
❒ A: front left window opening/closing. doors closed and for each door:
"Continuous automatic" operation ❒ fully close the window to be
during window opening/closing stage initialised, with manual operation;
and anti-pinch system activated.
28
❒ after the window has reached the ELECTRIC SUN
upper end of travel, hold the up button ROOF
down for at least 3 seconds.
22) 11)
WARNING The electric sun roof comprises two
glass panels (the front one is mobile
21) Incorrect use of the electric windows and the rear one fixed) and is fitted with
may be dangerous. Before and during their an electrically operated sun blind.
operation, ensure that any passengers
are not at risk from the moving glass either The sun roof and the blind can
by personal objects getting caught in the be operated only with the ignition
mechanism or by being hit by it directly. device turned to MAR.
When leaving the vehicle (equipped with
mechanical key with remote control), CONTROL BUTTONS
always remove the key from the ignition Button A fig. 33: pressing the button
device to prevent accidental operation of
the electric windows from being a hazard
on the front glass panel, it will
for those still on board. completely open. From the position of
complete opening, pull the button:
the front panel will completely close.
During the automatic opening and
closing stages, press button A again to 33 J0A0224C
interrupt the blind movement.

Button B fig. 33: pressing this button, Button C fig. 33: press and release the
the blind will mode towards the rear button to move the roof to "spoiler"
part of the vehicle, until it is fully open. position (swivel opening). This type of
With blind fully open press button B: swivel opening can be activated
the blind will move towards the front irrespective of the position of the sun
part of the vehicle, until it is fully closed. roof. During the spoiler opening, any
During the automatic opening and pressure on button C stops the roof
closing stages, press button B again to closing.
interrupt the blind movement.
29
ANTI-PINCH DEVICE ❒ insert key C in housing A (for blind ❒ hold down button A until the roof is

The sun roof and the electric blind are movement) or B (for sun roof completely closed: the initialisation
equipped with an anti-pinch safety movement) and turn it clockwise to procedure has ended.
system capable of detecting the open the roof (or the blind) or
presence of an obstacle whilst the roof anticlockwise to close the roof (or the
blind). WARNING
is closing: if this happens, the system
intervenes and the movement of the INITIALISATION
PROCEDURE 22) When leaving the vehicle (equipped
glass is immediately reversed. with mechanical key with a remote control),
EMERGENCY OPERATION Following an automatic movement always remove the key from the ignition
malfunction while opening/closing or device to avoid the risk of injury to those
If the control buttons fail to operate, the still inside the vehicle due to accidental
after an emergency manoeuvre (see
sun blind and the sun roof can be operation of the sun roof. Improper use of
description in the previous paragraph), the roof can be dangerous. Before and
moved manually, proceeding as
the automatic operation of the sun during operation, always check that
described below:
roof must be initialised again. nobody is at risk of being injured by the
❒ Sun blind movement: remove Proceed as follows: moving sun roof or by objects getting
protective cap A fig. 34 on the internal caught or hit by it.
❒ move the roof to fully closed position;
trim;
❒ move the ignition device to STOP
❒ Sun roof movement: remove WARNING
and keep it there for 10 seconds;
protective cap B fig. 34 on the internal
trim; ❒ move the ignition device to MAR;
❒ press button A in closing position; 11) Do not open the sun roof if a
transverse roof rack is fitted. Do not open
❒ press the button for at least 10 the sun roof if there is snow or ice on it:
seconds, then you should hear the you may damage it.
mechanical stop of the roof motor;
❒ press the button A in the "closing"
position again within 5 seconds;
❒ hold down button A: in this position,
the roof will perform an automatic
opening and closing cycle. Otherwise,
repeat the operations starting from
34 J0A00390C
the beginning;
❒ take the supplied spanner C fig. 34
from the luggage compartment;
30
MySky SUN ROOF ❒ Button B: opening button for swivel Anti-pinch device
position of the front panel. To bring The front panel has an anti-pinch safety
the roof into swivel position, press and system capable of detecting the
12) release the button. This opening mode presence of an obstacle whilst the
The roof has two panels, a front and a can be activated with fully closed roof panel is being opened and closed.
rear one, that can be individually or only. With open panel, or with partially When this happens, the system stops
simultaneously removed, as wished. open panel, the button B will be and the movement of the panel is
Front and rear panels are distinguished deactivated. During the swivel opening, immediately reversed.
by a dedicated symbol on the bottom any pressure on the button stops the
roof closing. PANEL REMOVAL
of the panels themselves.
IMPORTANT Remove the panels only
IMPORTANT The panels can withstand when the vehicle is at a standstill.
any snow that may deposit on them. The rear panel can be removed only
In any case, it is advisable to remove when the front panel is fully closed
excessive snow. or removed.
FRONT PANEL ELECTRIC
MOVEMENT Proceed as follows to remove the
panels:
On some versions, the front panel
❒ working inside the passenger
might be electrically operated. This
compartment, fit the spanner A fig. 36
operates only with the ignition device at
inside the housing B fig. 37, rotate it
MAR. The panel can be adjusted
and continue rotating it next to the
forward/backward and opened in swivel
symbol, so that the door lock is
position.
released; at the same time, fully pull the
The buttons to operate the front panel
handle C (on the same panel) to the
are located on the trim close to the
end of travel;
front roof light fig. 35:
❒ remove the panel (front or rear), or
❒ Button A: opening/closing button
both;
until the end of stroke of the front panel.
Pressing the button on the front glass ❒ place the panel (or both panels)
panel will completely open it. From inside the dedicated suitcase (see the
35 J0A0225C following pages) and arrange it in the
the position of complete opening pull
the button: the front panel will luggage compartment.
completely close.
31
❒ close the suitcase and position it EMERGENCY OPERATION

properly inside the luggage If the control buttons fail to operate, the
compartment; sun roof can be moved manually,
❒ secure the suitcase firmly to the proceeding as described below:
retaining hooks on the luggage
compartment crossmember.
36 J0A0272C
39 J0A0080C
❒ remove protective cap A fig. 39 on

the internal trim;
❒ introduce the supplied key B into
housing A and turn it clockwise to open
37 J0A0271C the roof or anticlockwise to close it.
PANEL STORAGE
SUITCASE WARNING
After removing the roof panels, they
must be positioned inside the 12) Do not open the sun roof if a
dedicated suitcase inside the luggage transverse roof rack is fitted. Do not open
38 J0A0416C the sun roof if there is snow or ice on it:
compartment. It is recommended to
you may damage it.
perform this procedure from outside the IMPORTANT Never put excess loads
vehicle. on the suitcase; for further information,
Proceed as follows: see the description in the documents
❒ open the suitcase, position the first supplied with the suitcase.
panel B as shown in fig. 38 and then
position the second panel C;
32
BONNET ❒ release bonnet stay C fig. 42 from its ❒ lower the bonnet to approximately 40
locking device D, then insert its end centimetres from the engine
OPENING
in housing E on the bonnet. compartment and let it drop. Make sure
Proceed as follows: that the bonnet is completely closed
❒ pull lever A fig. 40 in the direction and not only fastened by the locking
indicated by the arrow; device by trying to open it. If it is not
perfectly closed, do not try to press the
bonnet lid down but open it and repeat
the procedure.
25) 26)
IMPORTANT Always check that the

bonnet is closed correctly to prevent it
from opening while the vehicle is
travelling. Since the bonnet is equipped
with a double locking system, one for
40 J0A0068C each side, you must check that is
closed on both its side ends.
❒ operate lever B fig. 41, in the
direction indicated by the arrow, and
raise the bonnet; WARNING
23) Wrong positioning of the bonnet stay

may cause the bonnet to fall abruptly.
42 J0A0070C
24) Raise the bonnet using both hands.
23) 24) Before raising the bonnet make sure that
the windscreen wipers are not lifted from
CLOSING the windscreen and are operating, that the
Proceed as follows: vehicle is at a standstill and that the electric
parking brake is engaged.
❒ hold the bonnet up with one hand
and with the other remove the stay from
41 J0A0069C
the housing E and fit it back in locking
device D;
33
25) For safety reasons the bonnet must LUGGAGE Emergency opening from

always be correctly closed while driving. COMPARTMENT the inside
Therefore, make sure that the bonnet
is properly closed and that the lock Proceed as follows:
is engaged. If you discover that the bonnet ❒ remove the parcel shelf (where
is not perfectly closed during travel, stop The luggage compartment unlocking is
provided), remove the rear head
immediately and close the bonnet in the electrically operated and is deactivated
correct manner. restraints and completely fold the seats;
when the vehicle is in motion.
26) Perform these operations only when
OPENING FROM THE
the vehicle is stationary. OUTSIDE
27)
When unlocked, the luggage
compartment can be opened from
outside the vehicle using the electric
opening handle A fig. 43 located under
the handle until the unlocking click is
heard or by quickly pressing button
on the remote control twice. 44 J0A0085C
❒ take the screwdriver provided and

remove yellow tab A fig. 44;
❒ insert the screwdriver in housing B
fig. 45, in order to activate the luggage
compartment release tab.
43 J0A0253C
45 J0A0214C
34
CLOSING LOAD COMPARTMENT
CHARACTERISTICS
To close the luggage compartment
grab the handle located inside the Reconfigurable load
tailgate. platform
The platform can take two different
IMPORTANT Before closing the positions: "threshold level" position or
luggage compartment make sure that "completely raised" position. The load
you have the keys since the luggage platform can be located in oblique
compartment is automatically locked. position (tilted towards the rear seat
LUGGAGE backrests), in order to facilitate access 46 J0A0086C
COMPARTMENT to the area underneath the luggage

INITIALISATION compartment.
IMPORTANT If the battery is The load platform can be tilted, and is
disconnected or the protection fuse equipped with a washable plastic
blows, the luggage compartment surface, useful for instance for
opening/closing mechanism must be transporting wet or muddy items.
13)
reinitialised as follows:
❒ close all the doors and the luggage Reconfigurable load
compartment; platform access/movement
❒ press the button on the remote To access the double load 47 J0A0088C
control; compartment grab device A fig. 46 and

❒ press the button on the remote raise platform B upwards keeping it
control. with one hand.
To move the load platform from lower to
upper position, proceed as follows:
❒ grip handle A and raise platform B,
holding it with one hand;
❒ position platform B correctly in the
guides D fig. 47 on the side panels and
rear crossmember E.
35
Power socket

This is located on the left side of the WARNING
luggage compartment. It only operates
with the ignition device at MAR. 27) Be careful not to hit objects on the
storage shelf when you open the tailgate.
IMPORTANT Do not connect devices
with power higher than 180 W to the
socket. Do not damage the socket by
using unsuitable adaptors. WARNING
13) The dimensions of the platform permit

a maximum capacity of distributed weight
of 70 kg (in position 0) or 40 kg (in position
1): do not load objects with a higher
weight.
36
KNOWING THE INSTRUMENT PANEL
This section of the booklet gives you all CONTROL PANEL AND
the information you need to ON-BOARD INSTRUMENTS ........... 38
understand, interpret and use the DISPLAY ......................................... 40
instrument panel correctly.
WARNING LIGHTS AND
MESSAGES .................................... 43
- Red warning lights ............................ 43
- Amber warning lights ........................ 47
- Green warning lights ........................ 51
- Blue warning lights ........................... 52
- Red symbols on the display .............. 52
- Amber symbols on the display .......... 54
- White symbols .................................. 60
- Messages on the display .................. 61
37
CONTROL PANEL AND ON-BOARD INSTRUMENTS

.
VERSIONS WITH MULTIFUNCTION DISPLAY
48 J0A0005C
A. Rev counter – B. Digital engine coolant temperature gauge with overheating warning light – C. Multifunction display – D. Digital fuel level gauge
with reserve warning light (the triangle on the right side of the symbol indicates the side of the vehicle with the fuel filler) – E. Speedometer
(speed indicator) (the speedometer contains a brightness sensor)
Warning light supplied on diesel versions only. Diesel versions also contain the icons on the display and the
speedometer full scale is 6000 rpm.
IMPORTANT The illumination of the instrument panel graphics may vary according to version.
38
VERSIONS WITH RECONFIGURABLE MULTIFUNCTION DISPLAY
49 J0A0006C
A. Rev counter – B. Digital engine coolant temperature gauge – C. Multifunction display – D. Digital fuel level gauge (the triangle on the right side of
the symbol indicates the side of the vehicle with the fuel filler) – E. Speedometer (speed indicator) (the speedometer contains a brightness
sensor)
Warning light supplied on diesel versions only. Diesel versions also contain the icons on the display and the
speedometer full scale is 6000 rpm.
IMPORTANT The illumination of the instrument panel graphics may vary according to version.
39
DISPLAY ❒ Upper part of the display (A): time, ❒ Central area of the display (B):

Gear Shift Indicator (where provided), vehicle speed, warning messages/any
gear engagement (versions with failure indications.
MULTIFUNCTION automatic transmission), outside ❒ Lower area of the display (C): total
DISPLAY temperature, compass indications, kilometres (or miles) run, digital gauges
The display fig. 50 will show the date. for engine coolant temperature and
following information: ❒ Central area of the display (B): fuel level
vehicle speed, warning messages/any GEAR SHIFT INDICATOR
failure indications. (where provided)
❒ Lower area of the display (C): total The Gear Shift Indicator (GSI) system
kilometres (or miles) run and icons of advises the driver to change gear
any failure indications. through a special indication on the
RECONFIGURABLE display. Through the GSI, the driver is
MULTIFUNCTION informed that the gear change will allow
DISPLAY a reduction in fuel consumption.
The display fig. 51 will show the SHIFT UP ( SHIFT) icon on the
following information: display: suggests switching to a higher
gear.
SHIFT DOWN ( SHIFT) icon on the
display: suggests switching to a lower
120
gear.
The indication in the display remains
until a gear is shifted or the driving
conditions go back to a situation where
gearshifting is not required to improve
consumption.
50 J0A2004C 51 J0A2005C
❒ Upper area of the display (A):

time, outside temperature, compass
indications, date.
40
CONTROL BUTTONS MAIN MENU ❒ "Security"
These are located on the left side of the Menu items ❒ "Safety & Assistance";
steering wheel fig. 52. The Menu includes the following items: ❒ "Lights";
❒ SPEEDOMETER ❒ "Doors & Locks".
❒ VEHICLE INFO Display
❒ DRIVER ASSIST By selecting item "Display" you can
❒ FUEL ECO access the settings/information
❒ TRIP regarding: "Language", "See phone",
❒ STOP/START "See navigation".
❒ AUDIO "Units"
❒ ALERTS Select item "Units" to choose the unit of
52 J0A0189C
❒ DISPLAY SET-UP measurement between: "US" (setting
❒ VEHICLE SETUP available only for some markets),
They allow the driver to select the items
The Menu item display mode (capital or "Metric", "Custom".
in the Main menu of the display (see
paragraph "Main menu"). lower-case letters) changes according "Clock & Date"
to the type of display.
❒ / : press and release the Select item "Clock & Date" to make the
Some options have a submenu.
buttons to scroll the main menu and the following adjustments: "Set time",
NOTE With the Uconnect™ system,
submenus upwards or downwards. "Time format", Set date".
some Menu items are shown and
❒ / : press and release the managed on the display of the latter
buttons to access the info screens or "Security"
and not on the instrument panel display
the submenus of an item of the main Select item "Security" to make the
(see the paragraphs on the
menu. Button allows you to exit the following adjustments: "Passenger
Uconnect™).
Main menu. AIRBAG", "Speed beep", "Seat belt
Vehicle setup (Change buzzer", "Hill Start Assist".
❒ OK: press this button to access/ vehicle settings)
select the info screens or the submenus
of an item of the main menu. Hold the This function allows you to change the
button pressed for one second to reset settings for:
the displayed/selected functions. ❒ "Display";
❒ "Units";
❒ "Clock & Date";
41
The "Passenger AIRBAG" function is Versions with

TRIP COMPUTER
used to activate/deactivate the front reconfigurable multifunction
display The “Trip computer” is used to display
passenger side airbag. Passenger's information on vehicle operation when
protection active: the LED ON On versions equipped with the ignition device is at MAR.
comes on constantly on the dashboard reconfigurable multifunction display only This function is characterised by two
located in the instrument panel. the following items are available: separate memories, called "Trip A" and
Passenger's protection not active: "Display" (only items "See phone" and "Trip B", where the vehicle's "complete
the LED OFF on the dashboard "See navigation" can be selected), missions" (journeys) are recorded in a
comes on constantly in the control "Security" and "Safety & Assistance" reciprocally independent manner.
panel. (only item "Buzzer volume" can be “Trip A” allows the following values to
selected). All other items will be shown be displayed: "Distance travelled A",
"Safety & Assistance"
and managed on the Uconnect™ "Average consumption A", "Journey
For possible adjustments see system display. time (driving time) A".
paragraph Uconnect™ in chapter
“Trip B” allows the following values to
"Multimedia".
be displayed: "Distance travelled B",
"Lights" "Average consumption B", "Journey
Select item "Lights" to make the time (driving time) B". The “Trip B”
following adjustments: "Ambient function may be excluded.
lighting", "Follow me", "Headlights while Both memories can be reset: (reset -
opening", "Headlight sensor", "High start of a new journey).
Beams Auto Dim", "Daytime Lights", To reset the values of "Trip A" and "Trip
"Cornering lights". B" press and hold the OK button on
the steering wheel controls.
"Doors & Locks"
NOTE “Range” and “Instantaneous fuel
Select item "Doors & Locks" to make consumption" parameters cannot be
the following adjustments: "Autoclose", reset.
"Auto unlock on exit", "Flash Lights
w/Lock", "Horn with Lock", "Horn
w/Remote Start", "Remote Unlock"
(versions without Passive Entry), "Door
Unlock" (versions with Passive Entry),
"Passive Entry".
42
WARNING LIGHTS AND MESSAGES
IMPORTANT The warning light switches on in the instrument panel together with a dedicated message and/or acoustic signal
when applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or
alternative to the information contained in the Owner Handbook, which you are advised to read carefully in all cases. Always
refer to the information in this chapter in the event of a failure indication.
IMPORTANT Failure indications displayed are divided into two categories: serious and less serious failures. Serious faults are
indicated by a repeated and prolonged warning "cycle". Less serious faults are indicated by a warning "cycle" with a shorter
duration. The display cycle of both categories can be interrupted. The instrument panel warning light will stay on until the cause
of the failure is eliminated.
WARNING LIGHTS ON INSTRUMENT PANEL

Red warning lights
Warning light What it means
INSUFFICIENT BRAKE FLUID / ELECTRIC PARKING BRAKE ON

Low brake fluid level
The warning light switches on when the brake fluid in the reservoir falls below the minimum level, possibly
due to a leak in the circuit. Restore the brake fluid level, then check that the warning light has switched off.
If the warning light stays on, contact a Jeep Dealership.
Electric parking brake on

The warning light switches on when the electric parking brake is engaged. Release the electric parking
brake, then check that the warning light has switched off. If the warning light stays on, contact a Jeep
Dealership.
43
EBD FAILURE
The simultaneous switching on of the (red) and (amber) warning lights with the engine on
indicates either a fault of the EBD system or that the system is not available. In this case, the rear wheels
may suddenly lock and the vehicle may swerve when braking sharply. The display shows the dedicated
message.
Drive very carefully to the nearest Jeep Dealership to have the system inspected immediately.
POWER STEERING FAILURE

If the warning light remains on, you could not have steering assistance and the effort required to operate
the steering wheel could be increased; steering is, however, possible.
On some versions, the display shows the dedicated message.
Contact a Jeep Dealership as soon as possible.
44
AIRBAG FAILURE
If the warning light switches on constantly, this indicates a fault in the airbag system. The display shows the
dedicated message. 28) 29)
SEAT BELTS NOT FASTENED

The warning light switches on constantly if the vehicle is stationary and the driver side or passenger side
seat belt, with the passenger seated, is not fastened. The warning light flashes and a buzzer will sound if
the vehicle is in motion and the driver side or passenger side seat belt, with the passenger seated, is not
correctly fastened.
In this case, fasten the seat belt.
WARNING
28) If the warning light does not switch on when the ignition device is moved to MAR or if it stays on when driving (together with the
message on the display), there might be a fault in the restraint systems; in this case, the airbags or pretensioners may not deploy in the event
of an accident or, in a lower number of cases, they could deploy erroneously. Before proceeding, contact a Jeep Dealership to have the
system checked as soon as possible.
29) The fault of the warning light is signalled by the switching on of the icon on the instrument panel. In this case, the warning light
may not indicate any faults with the restraint systems. Before continuing, contact a Jeep Dealership immediately to have the system checked.
45
ENGINE COOLANT TEMPERATURE TOO HIGH

The warning light (or the icon on the display) on some versions switches on when the engine is overheated.
The display shows the dedicated message.
When driving normally: stop the vehicle, switch off the engine and check that the water level in the
reservoir is not below the MIN mark. If it is, wait for the engine to cool down, then slowly and carefully open
the cap, top up with coolant and check that the level is between the MIN and MAX marks on the reservoir.
Also check visually for any fluid leaks. If, when restarting, the warning light switches on (or the icon is
displayed) again, contact a Jeep Dealership.
If the vehicle is used under demanding conditions (e.g. in high-performance driving): slow down and,
if the warning light stays on, stop the vehicle. Wait for 2 or 3 minutes with the engine running and slightly
accelerated to further favour the coolant circulation. Then stop the engine. Check the correct coolant level
as described above.
IMPORTANT Over demanding routes, it is advisable to keep the engine on and slightly accelerated for a
few minutes before switching it off.
46
Amber warning lights
TPMS SYSTEM
TPMS failure
The warning light switches on when a failure is detected in the TPMS. In this case, contact a Jeep
Dealership as soon as possible. Should one or more wheels be fitted without sensors, the display will show
a warning message until initial conditions are restored.
IMPORTANT Do not continue driving with one or more flat tyres as handling may be compromised. Stop
the vehicle, avoiding sharp braking and steering. Repair immediately using the dedicated tyre repair kit and
contact the dedicated Jeep Dealership as soon as possible.
Tyre pressure low

The warning light switches on and a message is displayed to indicate that the tyre pressure is lower than
the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tyre duration
and fuel consumption may not be guaranteed.
Should two or more tyres be in the condition mentioned above, the display will show the indications
corresponding to each tyre in sequence.
In any situation in which the message on the display is "See manual", it is ESSENTIAL to refer to the
contents of the "Wheels" paragraph in the "Technical data" chapter, strictly complying with the indications
that you find there.
ABS FAILURE
The warning light switches on to indicate an ABS fault. In this case the braking system will work as normal,
but without the extra performance offered by the ABS. The display shows the dedicated message. Drive
carefully and contact a Jeep Dealership as soon as possible.
47
ESC SYSTEM
ESC system activation
Intervention by the system is indicated by the flashing of the warning light: it indicates that the vehicle is in
critical stability and grip conditions.
ESC system failure

If the warning light does not switch off, or if it stays on with the engine running, a failure was found on the
ESC system. Contact a Jeep Dealership as soon as possible.
Hill Start Assist failure

The warning light switches on and the displays shows the dedicated message, informing about Hill Start
Assist system failure. Contact a Jeep Dealership as soon as possible.
PARTIAL / TOTAL DEACTIVATION OF ACTIVE SAFETY SYSTEMS

The warning light switches on to inform that some active safety systems have been partially or totally
deactivated. When the systems are reactivated, the warning light switches off.
REAR FOG LIGHT

The warning light switches on when the rear fog light is turned on.
FAULT OF THE ELECTRIC PARKING BRAKE

The warning light switches on when a fault about the electric parking brake is detected. The display shows
the dedicated message. Contact a Jeep Dealership as soon as possible.
30)
WARNING
30) If a fault is present with sharp braking, the rear wheels may lock and the vehicle may swerve.
48
INJECTION/EOBD SYSTEM FAILURE

If the warning light remains on, or it switches on whilst driving, the injection system is not working properly.
The warning light on constantly signals a malfunction in the supply/ignition system which could cause
high exhaust emissions, a possible loss of performance, poor driveability and high consumption.
On some versions, the display shows the dedicated message.
The warning light switches off if the malfunction disappears, but it is still stored by the system.
Under these conditions, the vehicle can continue travelling at moderate speed but without demanding
excessive effort from the engine or high speed. Prolonged use of the vehicle with the warning light on
constantly may cause damage.
If the warning light flashes, it means that the catalytic converter may be damaged. Release the
accelerator pedal to lower the speed of the engine until the warning light stops flashing.
Continue the journey at moderate speed, trying to avoid driving conditions that may cause further flashing
and contact a Jeep Dealership as soon as possible. 14)
WARNING
14) If, turning the ignition device to MAR, the warning light does not turn on or if it turns on steadily or flashing when travelling (on some
versions together with the message on the display), contact a Jeep Dealership as soon as possible.
49
FUEL RESERVE/LIMITED RANGE

This warning light (or the icon on the display) comes on when about 5 to 7 litres of fuel are left in the tank.
When the remaining range is lower than approx. 50 km (or equivalent value in miles), on some versions, the
display will show a warning message. 15)
GLOW PLUG PREHEATING FAILURE (Diesel versions)

The warning light will flash (a message will appear on the display, on some versions) to indicate a fault in
the glow plugs preheating system.
In this case, contact a Jeep Dealership as soon as possible.
LANESENSE SYSTEM
Versions with multifunction display
The warning light switches on as follows:
Warning light continuously on (white): the system is activated, but the lane limits were not detected (the
lane lines are grey).
Warning light on and flashing (amber): the vehicle has approached the lane line and is about to pass it.
Warning light switched on continuously (green): the system has detected the limits of both lanes. The
system will act on the steering wheel if the lane was passed unintentionally.
Versions with reconfigurable multifunction display
On versions equipped with reconfigurable multifunction display, the warning light shown at the side is
replaced with dedicated graphic icons, displayed in the upper left area of the display. These icons are
displayed according to the same logic described for versions equipped with multifunction display (see
previous description).
WARNING
15) If the warning light (or the icon on the display) flashes whilst driving, contact a Jeep Dealership.
50
Green warning lights
SIDE LIGHTS AND DIPPED BEAM HEADLIGHTS

The warning light switches on when side lights or dipped beam headlights are turned on.
This function allows the headlights to remain on for 30, 60 or 90 seconds after the ignition device was
placed in STOP position ("Follow me" function).
AUTOMATIC MAIN BEAM HEADLIGHTS

This warning light comes on when the automatic main beam headlights turned on.
FOG LIGHTS
The warning light switches on when the fog lights are turned on.
LEFT-HAND DIRECTION INDICATOR

The warning light switches on when the direction indicator control stalk is moved downwards or, together
with the right indicator, when the hazard warning light button is pressed.
RIGHT-HAND DIRECTION INDICATOR

The warning light switches on when the direction indicator control stalk is moved upwards or, together with
the left indicator, when the hazard warning light button is pressed.
STOP/START SYSTEM INTERVENTION

The warning light comes on in the event of Stop/Start system intervention (engine switching off). Restarting
the engine, the warning light switches off.
51
Blue warning lights
KNOWING THE INSTRUMENT PANEL Warning light What it means
MAIN BEAM HEADLIGHTS

The warning light switches on when the main beam headlights are turned on.
SYMBOLS ON THE DISPLAY

Red symbols on the display
Symbol What it means
LOW ENGINE OIL PRESSURE

The symbol switches on, together with a message on the display, if there is insufficient engine oil pressure.
16)
IMPORTANT Do not use the vehicle until the failure has been solved. The switching on of the symbol does
not show the quantity of oil in the engine: the oil level must be checked manually.
AIRBAG FAILURE
If the symbol switches on constantly, this indicates a failure in the airbag system. The display shows the
dedicated message. Contact a Jeep Dealership as soon as possible.
ALTERNATOR FAILURE
The switching on of the symbol with engine on corresponds to an alternator failure. Contact a Jeep
Dealership as soon as possible.
WARNING
16) If the symbol switches on when driving, stop the engine immediately and contact a Jeep Dealership.
52
INCOMPLETE DOOR LOCKING

The symbol switches on when one or more doors are not completely shut. An acoustic signal is activated
with the doors open and the vehicle moving. Close the doors properly.
BONNET NOT PROPERLY SHUT

The symbol switches on when the bonnet is not properly shut. A buzzer is heard when the bonnet is open
and the vehicle is moving. Close the bonnet properly.
TAILGATE NOT PROPERLY SHUT

The symbol switches on when the tailgate is not properly shut. A buzzer is heard with open tailgate and
vehicle moving. Close the tailgate correctly.
AUTOMATIC TRANSMISSION FAILURE

The symbol switches on (together with a message in the display and a buzzer) to indicate that the
automatic transmission is faulty. Contact a Jeep Dealership as soon as possible. 17)
EXCESSIVE ENGINE OIL TEMPERATURE

The symbol switches on in the case of engine oil overheating. 18)
WARNING
17) Driving the vehicle with this symbol on may severely damage the gearbox, with resulting breakage. The oil may also overheat: contact
with hot engine or with exhaust components at high temperature could cause fires.
WARNING
18) If the symbol switches on when driving, stop the vehicle and the engine immediately.
53
Amber symbols on the display
KNOWING THE INSTRUMENT PANEL Symbol What it means
SENTRY KEY FAILURE / BREAK-IN ATTEMPT

Sentry Key system failure
The symbol switches on to report a failure of the Sentry Key system. Contact a Jeep Dealership as soon as
possible.
Break-in attempt
The symbol switches on when the ignition device is moved to MAR position, along with the displaying of a
dedicated message, to report about a possible break-in attempt detected by the alarm system.
FUEL CUT-OFF SYSTEM OPERATION

The symbol switches on (along with a message on the display) in the event of fuel cut-off system
intervention.
For reactivating the fuel cut-off system, refer to the description in section "Fuel cut-off system" in chapter
"In an emergency". If it is still not possible to restore the fuel supply, contact a Jeep Dealership.
POSSIBLE ICE ON ROAD

The symbol switches on (along with a dedicated message on the display) when the outdoor temperature is
lower or equal to 3°C.
IMPORTANT In the event of outside temperature sensor failure, the digits that indicate the value are
replaced by dashes.
ENGINE OIL PRESSURE SENSOR FAILURE

The symbol switches on constantly together with the message in the display in case of engine oil pressure
sensor failure.
54
FORWARD COLLISION WARNING PLUS SYSTEM FAILURE

The symbols switch on (with the displayed message) in the case of failure of the Forward Collision Warning
Plus system. Contact a Jeep Dealership as soon as possible.
FORWARD COLLISION WARNING PLUS SYSTEM DEACTIVATION

The symbol (or the warning light on the dashboard) switches on if the Forward Collision Warning Plus
system has been deactivated.
RAIN SENSOR FAILURE

The symbol switches on (along with a message on the display) in the event of rain sensor failure. Contact a
Jeep Dealership as soon as possible.
STOP/START SYSTEM FAILURE

The symbol switches on to report a failure of the Stop/Start system. The display will show a dedicated
message. Contact a Jeep Dealership as soon as possible.
KEYLESS ENTER-N-GO SYSTEM FAILURE

The symbol switches on, along with a displayed message, in case of Keyless Enter-N-Go system failure.
FUEL CUT-OFF SYSTEM FAILURE

The symbol switches on along with a message on the display in the event of fuel cut-off system failure.
SPEED LIMITER FAILURE

The symbol switches on in case of failure of the Speed Limiter device. Contact a Jeep Dealership to have
the failure solved.
55
LANESENSE SYSTEM FAILURE

Camera obstructed: the symbol lights up in the case of dirt on the windscreen, which may adversely
affect correct operation of the camera. On versions equipped with reconfigurable multifunction display the
vehicle icon is shown in the upper right area of the display. In this case clean the windscreen using a soft
clean cloth, taking care not to scratch it. Should the failure persist, contact a Jeep Dealership as soon as
possible.
LaneSense system failure: the symbol also lights up in the case of failure to the LaneSense system. In
this case contact a Jeep Dealership as soon as possible.
AUTOMATIC MAIN BEAM HEADLIGHTS FAILURE

The symbol switches on to report a failure of the automatic main beam headlights. Contact a Jeep
AUTOMATIC TRANSMISSION FLUID OVERHEATING

The symbol switches on in the case of transmission overheating, after a particularly demanding use. In this
case an engine performance limitation is carried out. With engine off or at idle speed, wait until the symbol
switches off.
TOW HOOK FAILURE

The symbol switches on to report a failure of the tow hook. Contact a Jeep Dealership as soon as
possible.
AUDIO SYSTEM FAILURE

The symbol switches on to report a failure of the audio system. Contact a Jeep Dealership as soon as
possible.
56
DUSK SENSOR FAILURE

The symbol switches on along with a message on the display in the event of dusk sensor failure. Contact a
Jeep Dealership as soon as possible.
WATER IN DIESEL FILTER (diesel versions)

The symbol switches on constantly when driving (along with a message in the display), to indicate the
presence of water in the diesel filter. 19)
WARNING
19) The presence of water in the fuel supply system circuit may cause severe damage to the injection system and irregular engine operation.
If the symbol is displayed (along with a message in the display) contact a Jeep Dealership as soon as possible to bleed the system. If
the above indications come on immediately after refuelling, water has probably been poured into the tank: switch the engine off immediately
and contact a Jeep Dealership.
57
ENGINE OIL DETERIORATED

(where provided)
Diesel versions: the symbol is displayed on some versions, along with a dedicated message displaying.
The symbol is displayed for 3 minute cycles and intervals of 5 seconds until oil is changed.
The symbol is displayed until the problem is solved.
Petrol versions: the symbol switches on and then is not displayed when the display cycle is completed.
IMPORTANT After the first indication, each time the engine is started the symbol will continue to switch on
as described above until the oil is changed. On certain versions a dedicated message is displayed.
If the symbol flashes, this does not mean that there is a fault on the vehicle, rather it simply reports that it is
now necessary to change the oil as a result of regular use of the vehicle.
The deterioration of engine oil is accelerated by using the vehicle for short drives, preventing the engine
from reaching operating temperature.
20) 21)
WARNING
20) Deteriorated engine oil should be replaced as soon as possible after the symbol is switched on, and never more than 500 km after it first
switches on. Failure to observe the above indications may result in severe damage to the engine and invalidate the warranty. The switching
on of this symbol is not correlated to the quantity of oil in the engine, therefore if it flashes you do not need to top up the engine oil.
21) If the symbol flashes whilst driving, contact a Jeep Dealership.
58
EXTERIOR LIGHTS FAILURE

the symbol switches on to indicate a failure on the following lights: daytime running lights (DRLs); parking
lights; trailer direction indicators (if present); trailer lights (if present); side lights; direction indicators; fog
light; reversing light; brake lights; number plate lights.
The failure may be caused by a blown bulb, a blown protection fuse or an interruption of the electrical
connection.
DPF CLEANING (particulate trap) in progress (diesel versions with DPF only)
The symbol switches on constantly to indicate that the DPF system needs to eliminate the trapped
pollutants (particulate) through the regeneration process.
The symbol does not switch on during every DPF regeneration, but only when driving conditions require
that the driver is notified. To turn off the symbol, keep the vehicle in motion until the regeneration process is
over. On average, the process lasts 15 minutes. Optimal conditions for completing the process are
achieved by travelling at 60 km/h with engine speed above 2000 rpm.
When this symbol switches on, it does not indicate a vehicle failure and thus it should not be taken to a
workshop. On some versions, together with the symbol switching on, the display shows a dedicated
message.
22)
WARNING
22) Vehicle travel speed should always be adapted to the traffic and weather conditions, and must always comply with traffic regulations. The
engine can be stopped even if the DPF warning light is on: however, repeated interruptions of the regeneration process could cause
premature deterioration of the engine oil. For this reason it is always advisable to wait for the symbol to go off before turning off the engine,
following the instructions above. It is not advisable to complete DPF regeneration with the vehicle stationary.
59
White symbols
KNOWING THE INSTRUMENT PANEL Symbol What it means What to do
SPEED LIMIT EXCEEDED

The symbol switches on when the set speed limit (e.g.
120 km/h / 75 mph) is exceeded; this can be done
through the menu of the display.
On some versions a message is displayed and an
acoustic signal is emitted.
Note For specific versions/markets another red symbol comes on as well.

HILL DESCENT CONTROL
(where provided)
Symbol on constantly: Hill Descent Control system
activation.
Symbol flashing: Hill Descent Control system
deactivation.
ELECTRONIC CRUISE CONTROL

The symbol switches on if the electronic Cruise Control
is activated.
SPEED LIMITER
The symbol switches on if the Speed Limiter device is
activated.
60
Messages on the display
Message on the display
FOUR WHEEL DRIVE FAILURE

SERV 4WD This indicator switches on to report a four wheel drive system failure. Contact a Jeep
BLIND-SPOT MONITORING SYSTEM

Sensor locking: a dedicated message is displayed in the case of failure of the Blind-spot
Monitoring system sensor. In this case, the LEDs on the door mirrors are switched on
constantly. An acoustic signal is also issued.
Free the bumper of any obstacles, cleaning it.
BLIND-SPOT MONITORING System not available: a dedicated message is displayed if the Blind-spot Monitoring
system is not available. In this case, the LEDs on the door mirrors are switched on
constantly.
The failed operation of the system might be due to the insufficient voltage from the battery
or other failures on the electrical system. Contact a Jeep Dealership as soon as possible
to have the electrical system checked.
PARKSENSE SYSTEM
(where provided)
Sensor locking: the message is displayed in the case of a failure of the ParkSense
system sensors. An acoustic signal is also issued.
Free the bumper of any obstacles, cleaning it.
PARKSENSE
System not available: a dedicated message is displayed if the Parksense system is not
available.
The failed operation of the system might be due to the insufficient voltage from the battery
or other failures on the electrical system. Contact a Jeep Dealership as soon as possible
to have the electrical system checked.
61
Message on the display
SCHEDULED SERVICING (SERVICE)

When the following scheduled servicing is approaching ("coupon"), the word "Service" will
"SERVICE" MESSAGE (SCHEDULED be displayed, followed by the number of kilometres/miles or days (where provided) left,
SERVICING) when the ignition device is turned to MAR.
Contact a Jeep Dealership. The operations of the "Scheduled Servicing Plan" will be
performed and the message will be reset.
62
SAFETY
The chapter that you are about to read ACTIVE SAFETY SYSTEMS ............ 64
is very important: it describes the AUXILIARY DRIVING SYSTEMS ...... 69
safety systems with which the vehicle is -BSM (Blind Spot Monitoring)
equipped and provides instructions on SYSTEM.............................................. 69
how to use them correctly. -FORWARD COLLISION WARNING
PLUS SYSTEM.................................... 71
-TPMS (Tyre Pressure Monitoring
System) ............................................... 73
OCCUPANT PROTECTION
SYSTEMS ....................................... 76
SEAT BELTS ................................... 76
SBR (SEAT BELT REMINDER)
SYSTEM ......................................... 77
PRETENSIONERS........................... 79
CHILD PROTECTION SYSTEMS..... 81
SUPPLEMENTARY RESTRAINT
SYSTEM (SRS) - AIRBAG................ 91
63
ACTIVE SAFETY ESC (Electronic Stability PBA (Panic Brake
SAFETY
SYSTEMS Control) SYSTEM Assist) SYSTEM
ABS (Anti-lock Braking The ESC system improves the The PBA system is designed to
System) directional control and stability of the improve the vehicle’s braking capacity
vehicle in various driving conditions, during emergency braking.
This system, which is an integral part of
correcting understeer and oversteer, The brake pedal should be pressed
the braking system, prevents one or
distributing the brake force on the continuously during braking, avoiding
more wheels from locking and slipping
appropriate wheels. intermittent presses, to get the most
in all road surface conditions,
out of the system. Do not reduce
irrespective of the intensity of the System intervention
pressure on the brake pedal until
braking action, ensuring that the vehicle The intervention of the system is braking is not necessary anymore.
can be controlled even during indicated by the flashing of the The PBA system is deactivated when
emergency braking and optimising warning light on the instrument the brake pedal is released.
stopping distances. panel, to inform the driver that 48) 49) 50)
System intervention the vehicle is in critical stability and grip
HSA (Hill Start Assist)
conditions. SYSTEM
The driver can feel that the ABS system
38) 39) 40) 41) 42)
has come into action because the This system is an integral part of the
brake pedal pulsates slightly and the TC (Traction Control) ESC system and facilitates starting on
system gets noisier: this is entirely SYSTEM
slopes.
normal with the system operating. The system automatically operates in
31) 32) 33) 34) 35) 36) 37) the event of slipping, loss of grip on wet System deactivation
DTC (Drag Torque roads (aquaplaning) and acceleration The Hill Start Assist system can be
Control) SYSTEM on slippery, snowy or icy roads, etc. on deactivated using the display Menu
one or both drive wheels. (see the instructions in the "Display"
The system intervenes in the event of
paragraph, "Knowing the instrument
sudden downshifting, or during ABS System intervention
panel" chapter).
braking, restoring torque to the engine The intervention of the system is 51) 52)
and thus preventing excessive drag indicated by the flashing of the
at the drive wheels, which may lead the warning light on the instrument
wheels to lock and a loss of vehicle panel, to inform the driver that
stability, above all in low-grip the vehicle is in critical stability and grip
conditions. conditions.
43) 44) 45) 46) 47)
64
DST SYSTEM (Dynamic System intervention
Steering Torque)
When the system is active, the
The DST function uses the integration warning light flashes on the
of the ESC system with the electric instrument panel, the engine power is
power steering to increase the safety reduced and braking can be felt on the
level of the whole vehicle. individual wheels, following the attempt
53) to eliminate the swerving of the trailer.
ERM (Electronic Rollover The system is active only with ESC
Mitigation) SYSTEM engaged.
The system monitors the tendency of When the ESC system is deactivated 53 J0A0154C
the wheels to rise from the ground if the (by pressing the button on the central
❒ the Selec-Terrain™ device is in
driver performs extreme manoeuvres tunnel), the TSC system is deactivated
4WD LOW mode;
like quick steering to avoid an obstacle, as well.
55) 56) ❒ the vehicle speed is below 25 km/h;
especially in poor road conditions.
If these conditions occur, the system HDC (Hill Descent ❒ the electric parking brake (EPB) is
intervenes on the brakes and engine Control) SYSTEM deactivated;
power to reduce the possibility that the (where provided) ❒ the driver side door is closed.
wheels are raised from the ground. It It is an integral part of the ESC system Activation of the system
is not possible to avoid tendency to roll and is aimed at keeping the vehicle at a
over if the phenomenon is due to constant speed during a descent, Once enabled, the HDC system will
reasons such as driving on high side operating autonomously on the brakes activate automatically if the vehicle
gradients, collision with objects or other in various ways at the same time. is driven downhill on a steep slope,
vehicles. In this way the vehicle stability and higher than 8%.
54) completely safe driving are guaranteed, The speed set for the HDC system can
above all in poor grip conditions and be adjusted using the brake pedal
TSC (Trailer Sway and the accelerator pedal (in the
Control) SYSTEM steep descents.
1–25 km/h range). Once the desired
The system employs a series of Enabling the system speed is reached, when both pedals
sensors located on the vehicle to are released the HDC system will
To enable the system, press the button
identify excessive swerving of the trailer maintain the set speed.
fig. 53:
and take the necessary precautions In this way, the driver can adjust the
The system is enabled if the following
to eliminate it. speed and, if necessary, reassume
conditions are met:
control of the vehicle.
65
With gear lever in neutral, speed DISABLING ACTIVE Activation of this mode is indicated by
SAFETY
adjustment using the accelerator pedal SAFETY SYSTEMS the warning light on the instrument
is not available. Depending on the versions, there are 3 panel switching on (on some versions,
The driver can cancel the intervention of configurations for the active safety together with a message on the
the HDC system at any time by systems on the vehicle: display).
completely depressing the accelerator ❒ systems enabled;
pedal or the brake pedal.
❒ systems partially disabled;
System deactivation ❒ systems disabled.
The HDC system is deactivated, but Systems enabled
remains available, if one of the following
conditions is met: All active safety systems are enabled.
This is the normal operating mode
❒ the speed of the vehicle exceeds
when driving a four-wheel-drive vehicle.
25 km/h but remains below 40 km/h;
This mode should be used in most
❒ the vehicle is on a descent with driving conditions. The system will be in 54 J0A0282C
insufficient gradient, below 8%, or a "Systems enabled" mode every time
level surface, or is going uphill; the engine is started. To restore "All systems enabled"
❒ the gear lever is in P (Park) position. IMPORTANT You are advised to select operating mode, press the button on
"Systems partially disabled" or the central tunnel again.
Disabling the system
"Systems disabled" modes only for "Systems completely enabled" mode
The system is deactivated and disabled specific driving requirements. will automatically reactivate every time
if one of the following conditions is the engine is started.
met: Systems partially disabled IMPORTANT When travelling on snowy
❒ button press fig. 53; By pressing the button on the central roads with snow chains, it may be
❒ activation of mode other than 4WD tunnel fig. 54 for fewer than 5 seconds helpful to activate "Systems partially
LOW; when driving, the TSC system can disabled" mode: in these conditions,
be disabled and the intervention of the slipping of the drive wheels when
❒ electric parking brake (EPB)
TC system can be limited to braking moving off makes it possible to obtain
engagement;
action on the individual drive wheels. better traction.
❒ driver side door open;
The other systems remain enabled.
❒ speed of 40 km/h exceeded
(immediate exit from HDC function).
57) 58)
66
Systems disabled When active safety systems are partially 33) If the ABS intervenes, this indicates
or totally deactivated, the warning that the grip of the tyres on the road is
Pressing the button on the central nearing its limit: you must slow down to a
tunnel for more than 5 seconds light will turn on in the instrument panel. speed compatible with the available grip.
completely deactivates the ESC In "SAND" and "MUD" modes, the
34) The ABS can’t overrule the natural laws
system, as well as the TSC and ERM active safety systems are partially of physics, and can’t increase the grip
systems; the TC system will be limited disabled and fine-tuned to ensure available according to the condition of the
maximum performance in the specific road.
to braking action on the individual
drive wheels. The other systems remain operating modes. It is in any case 35) The ABS cannot prevent accidents,
possible to reactivate them completely including those due to excessive speed on
enabled. corners, driving on low-grip surfaces or
Activation of this mode is highlighted by at any time by pressing the button on
aquaplaning.
the warning light on the instrument the central tunnel should you wish to
36) The capability of the ABS must never
panel switching on (on some versions, favour safety over "off-road" be tested irresponsibly and dangerously, in
together with a message on the performance. such a way as to compromise personal
display). IMPORTANT In 4WD LOW modes, the safety and the safety of others.
IMPORTANT If a speed of active safety systems are completely 37) For the correct operation of the ABS,
disabled in order to ensure maximum the tyres must of necessity be the same
approximately 65 km/h (40 mph) is make and type on all wheels, in perfect
exceeded, the systems will behave as off-road driving performance and it will
condition and, above all, of the prescribed
described for "Systems partially not be possible to reactivate them. type and size.
59) 60) 61) 62)
disabled" mode. 38) The ESC system cannot alter the
To restore "Systems enabled" operating natural laws of physics, and cannot
mode, press the button on the central increase grip, which depends on the
tunnel again. WARNING condition of the road.
"Systems enabled" mode will 39) The ESC system cannot prevent
accidents, including those due to excessive
automatically reactivate every time the 31) When the ABS intervenes and you feel
speed on corners, driving on low-grip
engine is started. the brake pedal pulsating, do not reduce
surfaces or aquaplaning.
the pressure, but hold it down firmly and
Versions with Selec-Terrain™ confidently; in doing so you will brake 40) The capability of the ESC system must
device in the shortest distance possible, never be tested irresponsibly and
depending on the current road conditions. dangerously, in such a way as to
On versions with Selec-Terrain™ 32) For maximum efficiency of the braking
compromise personal safety and the safety
device, the activation of certain driving of others.
system, a bedding-in period of about
modes partially or totally deactivates 500 km is required: during this period it is 41) For the correct operation of the ESC
certain active safety systems in order to advisable to avoid sharp, repeated and system, the tyres must of necessity be the
prolonged braking. same make and type on all wheels, in
optimise performance in the specific perfect condition and, above all, of the
mode. prescribed type and size.
67
42) ESC performance features must not 50) The capability of the PBA system must 56) The TSC system cannot prevent
SAFETY
induce the driver to take unnecessary never be tested irresponsibly and swerving for all trailers. If the system
or unfounded risks. Your driving style must dangerously, in such a way as to activates during driving, reduce the speed,
always be suited to the road conditions, compromise the safety of the driver, the stop the vehicle in a safe place and arrange
visibility and traffic. The driver is, in any other occupants of the vehicle or any other the load correctly to prevent the trailer
case, responsible for safe driving. road user. from swerving.
43) For the correct operation of the TC 51) The Hill Start Assist system is not a 57) Prolonged use of the system may
system, the tyres must of necessity be the parking brake; therefore, never leave the overheat the braking system. If the brakes
same make and type on all wheels, in vehicle without having engaged the electric overheat, the HDC system, when active,
perfect condition and, above all, of the parking brake, turned the engine off and will be gradually deactivated after suitably
prescribed type and size. engaged first gear, so that it is parked informing the driver (LED on button off):
44) TC performance features must not in safe conditions (for further information it can be reactivated only when the brakes
induce the driver to take unnecessary or read the "Parking" paragraph in the have cooled sufficiently. The distance
unfounded risks. Your driving style must "Starting and driving" chapter). that can be covered depends on the
always be suited to the road conditions, 52) There may be situations on small temperature of the brakes and therefore on
visibility and traffic. The driver is, in any gradients (less than 8%), with vehicle the gradient, load and speed of the
case, responsible for safe driving. laden, in which the Hill Start Assist system vehicle.
45) The TC system can’t overrule the may not activate, causing a slight reversing 58) The performance of a vehicle with HDC
natural laws of physics, and can’t increase motion and increasing the risk of collision must never be tested in imprudent or
the grip available according to the with another vehicle or object. The driver is, dangerous ways, with the possibility of
condition of the road. in any case, responsible for safe driving. putting the safety of the driver or other
53) DST is an aid for driving and does not people at risk.
46) The TC system cannot prevent
accidents, including those due to excessive relieve the driver of responsibility for driving 59) When "Systems partially disabled"
speed on corners, driving on low-grip the vehicle. mode is selected, the intervention of the
surfaces or aquaplaning. 54) The performance of a vehicle with ERM TC function is limited to braking action on
must never be tested in imprudent or the individual drive wheels and the
47) The capability of the TC must never be warning lights switches on in the
tested irresponsibly and dangerously, in dangerous ways, with the possibility of
putting the safety of the driver or other instrument panel. In "systems partially
such a way as to compromise personal disabled" mode, the engine torque value
safety and the safety of others. people at risk.
that the ESC system may require will
48) The PBA system can’t overrule the 55) When towing trailers, the utmost not be guaranteed and the stability of the
natural laws of physics, and can’t increase caution at the wheel is advised. Never vehicle will therefore be reduced.
the grip available according to the exceed the maximum permitted loads (see
the description in the "Weights" paragraph 60) With "Systems partially disabled" mode
condition of the road. selected, the TSC (Trailer Sway Control)
in the "Technical Specifications" chapter).
49) The PBA system cannot prevent system is disabled.
accidents, including those due to excessive 61) Your driving style must always be
speed on corners, driving on low-grip suited to the road conditions, visibility and
surfaces or aquaplaning. traffic. The driver is, in any case,
responsible for safe driving.
68
62) When "Systems disabled" mode is AUXILIARY DRIVING
selected, the ESC system will not be SYSTEMS
available in the event of emergency
manoeuvres. "Systems disabled" mode is BSM (Blind Spot
only for off-road use. Monitoring) SYSTEM
(where provided)
The system uses two radar sensors,
located in the rear bumper (one for
each side - see fig. 55), to detect the
presence of vehicles (vehicles, trucks,
motorbikes, etc.) in the rear side blind
spots of your vehicle.
56 J0A0217C
55 J0A0220C Sensors
The system warns the driver about the The sensors are activated engaging any
presence of vehicles in the detection forward gear at a speed higher than
area by lighting up, on the relevant side, about 10 km/h, or engaging the reverse
the warning light located on the door gear.
mirror fig. 56, along with an acoustic The sensors are temporarily
warning. When the vehicle is started the deactivated with vehicle at a standstill
warning light turns on to signal the and the gear lever in position P (Park)
driver that the system is active. (versions with automatic transmission),
or with vehicle at a standstill and
electric parking brake engaged
(versions with manual gearbox).
69
The detection area of the system The rear bumper area where the radar RCP (Rear Cross Path
SAFETY
covers about a lane on both sides of sensors are located must stay free from detection) system
the vehicle (around 3 metres). This area snow, ice and dirt gathered from the This system helps the driver during
begins from the door mirror and road surface for the system to operate reverse manoeuvres in the case of
extends for about 6 metres towards the correctly. reduced visibility. During "RCP"
rear part of the vehicle. Do not cover the rear bumper area operating mode, the system emits
When the sensors are active the system where the radar sensors are located acoustic and visual warnings if
monitors the detection areas on both with any object (e.g. adhesives, bike the presence of an object is detected.
sides of the vehicle and warns the rack, etc.). When an acoustic warning is sent,
driver about the possible presence of Rear view: the system detects vehicles the Uconnect™ volume is lowered.
vehicles in these areas. approaching to the rear part of your The system can be activated/
While driving the system monitors the vehicle on both sides and entering the deactivated through the display Menu
detection area from three different input rear detection area with a speed delta or the Uconnect™ system.
points (side, rear and front) to check lower than 50 km/h with respect to your The system monitors the rear detection
whether a signal needs to be sent vehicle. areas on both sides of the vehicle, to
to the driver. The system can detect the Overtaking vehicles: if another vehicle detect objects moving towards the
presence of a vehicle in one of these is overtaken slowly (with a speed delta sides of the vehicle at a minimum
three areas. lower than about 25 km/h) and this speed comprised between about 1
stays in the blind spot for about 1.5 km/h and 3 km/h and objects moving
Important
seconds, the warning light on the door at a maximum speed of 35 km/h, as
63) mirror of the corresponding side lights generally happens in the parking areas.
The system does not signal the up. If the speed delta between the The system activation is signalled to
presence of fixed object (e.g. safety two vehicles is higher than about 25 the driver by means of a visual and
barriers, poles, walls, etc.). However, in km/h, the warning light does not light acoustic warning.
some circumstances, the system may up.
activate in the presence of these IMPORTANT If the sensors are covered
objects. This is normal and does not by objects or vehicles, the system will
indicate a system malfunction. not warn the driver.
The system does not warn the driver
about the presence of vehicles coming
from the opposite direction, in the
adjacent lanes.
If a trailer is hitched to the vehicle, the
system automatically deactivates.
70
"Blind spot alert", "Visual" mode: FORWARD COLLISION The system may lightly brake to warn
when this mode is active, the BSM WARNING PLUS SYSTEM the driver if a possible frontal accident
system sends a visual warning to the 64) 65) 66) 67) is detected. Signals and limited braking
relevant door mirror, according to 23) 24) 25) 26) 27) 28) 29) 30) 31) are intended to allow the driver to
the detected object. When operating in It comprises a radar located behind the react promptly, in order to prevent or
RCP mode, the system sends visual front bumper fig. 57 and a camera reduce the effects of a potential
and acoustic warnings when the located in the central part of the accident.
presence of an approaching object is windscreen fig. 58. Versions equipped with Stop/Start
detected. When an acoustic warning is system: at the end of the automatic
sent, the Uconnect™ volume is braking, the Stop/Start system will
lowered. activate as described in paragraph
"Blind spot alert", "Visual & "Stop/Start system" of this chapter.
acoustic" mode: when this mode is Versions equipped with manual
active, the BSM system sends a visual gearbox: at the end of the automatic
warning to the relevant door mirror, braking the engine may stall and turn
according to the detected object. If the off, unless the clutch pedal is pressed.
direction indicator on the side where Versions equipped with automatic
an obstacle has been detected is transmission: at the end of the
57 J0A0334C
activated, an acoustic warning is braking, the latest stored gear
emitted as well. When the acoustic In the event of an imminent collision the is engaged: the vehicle may restart after
warning is emitted, the Uconnect™ system intervenes by automatically a few seconds from the automatic
volume is lowered. braking the vehicle to prevent the crash stop.
"Blind spot alert" function or reduce its effects. IMPORTANT After the vehicle is
deactivation: when the system is stopped, the brake calipers may be
deactivated ("Blind spot alert" mode at locked for about 2 seconds for safety
"OFF"), the BSM or RCP systems will reasons. Make sure you press the
not emit neither acoustic nor visual brake pedal if the vehicle moves slightly
warnings. The BSM system will store forwards.
the operating mode running when
the engine was switched off: each time
the engine is started, the operating
mode stored previously will be recalled
and used.
58 J0A0241C
71
Activation/deactivation ❒ the vehicle speed is between 7 and
SAFETY
system intervention might be
The Forward Collision Warning Plus 200 km/h; unexpected or delayed. The driver must
system can be deactivated (and then ❒ the front seat belts are fastened. be very careful, keeping control of the
reactivated) via the Uconnect™ vehicle to drive in complete safety.
System limited operation
system. The system can also signal
be deactivated bringing the ignition
If the dedicated message is displayed,
device to MAR.
a condition limiting the system
IMPORTANT The system status can be
operation may have occurred. The
changed with vehicle at a standstill
possible reasons of this limitation are
only.
something blocking the camera view or
Activation/deactivation a fault. If an obstruction is signalled,
If the Forward Collision Warning Plus clean the area of the windscreen
system has been correctly activated indicated in fig. 58 and check that the
with the Uconnect™ system, this will message has disappeared. 59 J0A0081C
be active each time the engine is In this case the system might be not
started. completely available.
To deactivate the system, hold the When the conditions limiting the system
button on the central tunnel pressed. functions end, this will go back to a
Following a deactivation, the system normal and complete operation. Should
will not warn the driver about the the fault persist, contact a Jeep
possible collision with the preceding Dealership.
vehicle, regardless of the setting Driving in special conditions
selected with the Uconnect™ system.
In certain driving conditions, such as,
To reactivate the system press the 60
for example: J0A0082C
button again.
The system only works if: ❒ driving close to a bend (see fig. 59);
❒ it is activated via the Uconnect™ ❒ vehicles with small dimensions
system; and/or not aligned in the driving lane
(see fig. 60);
❒ it has not been deactivated with a
long press of the button; ❒ lane change by other vehicles (see
fig. 61);
❒ the ignition device is at MAR;
❒ vehicle driving in a transverse way
(see fig. 62);
72
❒ The system may activate, assessing TPMS (Tyre Pressure
the trajectory of the vehicle, for the Monitoring System)
presence of reflecting metal objects (where provided)
different from other vehicles, such as 68) 69) 70) 71) 72) 73) 74) 32)
safety barriers, road signs, barriers The TPMS (Tyre Pressure Monitoring
before parking areas, tollgates, level System) signals possible insufficient tyre
crossings, gates, railways, objects near pressure according to the cold
road constructions sites or higher pressure indicated in chapter "Technical
than the vehicle (e.g. a flyover). In the specifications".
61 J0A0083C
same way, the system may intervene The system comprises a radio-
inside multi-storey car parks or frequency transmitter sensor fitted to
galleries, or due to a glare on the road each wheel (on the rim inside the tyre),
surface. These possible activations which is able to send information on the
follow the normal operating logic of the inflation pressure of each tyre to the
system and must not be regarded as control unit.
faults. The system automatically updates and
❒ The system has been designed for warning light switches off each
road use only. If the vehicle is driven time the system receives the updated
off-road, the system must be inflation pressures. The vehicle might
deactivated, to avoid unnecessary need to be driven at a speed higher
62 J0A0336C warnings. By selecting the 4WD LOW than about 25 km/h (15 mph) up to 20
mode, the system is automatically minutes for the TPMS to receive this
Important
deactivated. Automatic deactivation is information.
❒ The system has not been designed
signalled by the dedicated warning
to prevent impacts and cannot detect
light/icon switching on in the instrument
possible conditions leading to an
panel.
accident in advance. Failure to take into
account this warning may lead to
serious or fatal injuries.
73
IMPORTANT The TPMS is designed for TPMS deactivation 64) The system is an aid for the driver, who
SAFETY
original tyres and wheels. Pressure must always pay full attention while driving.
The TPMS can be deactivated by The responsibility always rests with the
and alarms signalled by the TPMS are replacing the wheels equipped with driver, who must take into account the
defined according to the size of the TPMS with others that are not (e.g. traffic conditions in order to drive in
tyres fitted on the vehicle. Using spare upon replacement of the wheel complete safety. The driver must always
wheels of a size, type and/or design maintain a safe distance from the vehicle in
assemblies in winter). Then drive the front.
different from the original ones may vehicle for at least 20 minutes at a
cause an irregular operation of the 65) If the driver depresses the brake pedal
speed higher than about 25 km/h (15 fully or carries out a fast steering during
system and damage the sensors. mph). The TPMS will emit an acoustic system operation, the automatic braking
Aftermarket fitted wheels may damage warning, the warning light will flash function may stop (e.g. to allow a possible
the sensors. Using aftermarket tyre for about 75 seconds, then will stay manoeuvre to avoid the obstacle).
sealants may damage the Tyre Pressure on constantly and the instrument panel 66) The system intervenes on vehicles
Monitoring System sensor. If will display the "TPMS check" message
travelling in the same lane. People, animals
aftermarket tyre sealant is used it is and things (e.g. pushchairs) are not taken
with some dashes (– –) instead of the into consideration.
recommended to go to a Jeep pressure values.
Dealership to have the sensors 67) If the vehicle must be placed on a roller
At the next engine start, the system will bench for maintenance interventions or if
checked. After tyre pressure check and not emit any acoustic signal and the it is washed in an automatic roller washing
adjustment, always refit the valve plug display will not show the message tunnel with an obstacle in the front part
to prevent humidity and dirt from "TPMS check", but the dashes (– –) will
(e.g. another vehicle, a wall or another
entering, these may damage the Tyre obstacle), the system may detect its
be still displayed instead of the pressure presence and activate. In this case the
Pressure Monitoring System sensor. value. system must be deactivated through the
TPMS check message settings of the Uconnect™ system.
68) The presence of the TPMS does not
If a system failure is present, the permit the driver to neglect regular checks
warning light flashes for about 75 WARNING of the tyre pressure, including for the
seconds and then stays on constantly. spare wheel, and correct maintenance: the
An acoustic signal is also issued. 63) The system is an aid for vehicle driving, system is not used to signal a possible
it DOES NOT warn the driver about fault to a tyre.
incoming vehicles outside of the detection 69) Tyre pressure must be checked with
areas. The driver must always maintain a tyres rested and cold. Should it become
sufficient level of attention to the traffic and necessary for whatever reason to check
road conditions and for controlling the pressure with warm tyres, do not reduce
trajectory of the vehicle. pressure even though it is higher than
the prescribed value. Repeat the check
when the tyres are cold.
74
70) Should one or more wheels be fitted 30) Do not wash with high-pressure jets in
without sensors (e.g. if the spare wheel the bumper lower area: in particular do
is fitted), the system will no longer be WARNING not operate on the system's electrical
available for the replaced wheel and a connector.
warning message will be shown on the 31) Be careful in the case of repairs and
23) The system may have limited or absent
display, until the wheels with sensors are new paintings in the area around the
operation due to weather conditions such
fitted again. sensor (panel covering the sensor on the
as: heavy rain, hail, thick fog, heavy snow.
71) The TPMS cannot indicate sudden tyre left side of the bumper). In the event of
24) The section of the bumper before
pressure drops (e.g. if a tyre bursts). In a frontal impact the sensor may
the sensor must not be covered with
this case, stop the vehicle, braking with automatically deactivate and display a
adhesives, auxiliary headlights or any other
care and avoiding sharp steering actions. warning to indicate that the sensor needs
object.
72) Replacing the normal tyres with winter to be repaired. Even without a malfunction
25) System intervention might be warning, deactivate the system operation
tyres and vice versa requires an inspection
unexpected or delayed when other vehicles if you think that the position of the radar
of the TPMS, which should be carried
transport loads projecting from the side, sensor has changed (e.g. due to
out only by a Jeep Dealership.
above or from the rear, with respect to the low-speed frontal impact as during parking
73) Changes in outside temperature may normal size of the vehicle. manoeuvres). In these cases, go to a
cause tyre pressures to vary. The system Jeep Dealership to have the radar sensor
26) Operation can be adversely affected by
may temporarily indicate insufficient realigned or replaced.
any structural change made to the vehicle,
pressure. In this case check the tyre
such as a modification to the front 32) The tyre quick repair kit (TireKit),
inflation pressure with the tyres cold and, if
geometry, tyre change, or a heavier load provided with the vehicle, is compatible
necessary top up the inflation pressure.
than the standard load of the vehicle. with the TPMS sensors. Using sealants
74) When a tyre is removed, it is advisable different from that in the original kit may
27) Incorrect repairs made on the front part
to replace the rubber gasket for the valve: compromise its operation. If sealants not
of the vehicle (e.g. bumper, chassis) may
go to a Jeep Dealership. The fitting/ equivalent with the original one are used, it
alter the position of the radar sensor,
removal of the tyres and/or rims require is recommended to have the TPMS sensor
and adversely affect its operation. Go to a
special care. To avoid damaging or fitting operation checked by a qualified repair
Jeep Dealership for any operation of this
the sensors incorrectly, tyre and/or rim centre.
type.
fitting/removal operations should only be
carried out by specialised staff. Go to a 28) Do not tamper nor carry out any
Jeep Dealership. intervention on the radar sensor or on the
camera on the windscreen. In the event
of a sensor failure, contact a Jeep
Dealership.
29) When towing a trailer (with modules
installed after purchasing the vehicle),
a vehicle or during loading manoeuvres on
a vehicle transporter (or in vehicle for
transport), the system must be deactivated
via the Uconnect™ system.
75
OCCUPANT SEAT BELTS
SAFETY
75) 76)
PROTECTION The retractor may lock when the vehicle

USING THE SEAT BELTS is parked on a steep slope: this is
SYSTEMS
The driver is responsible for respecting, perfectly normal. Furthermore, the
The most important safety equipment and ensuring that all the other retractor mechanism locks the belt if it
of the vehicle comprise the following occupants of the vehicle also respect, is pulled sharply or in the event of
protection systems: the local laws in force in relation to sudden braking, collisions or
❒ seat belts; the use of the seat belts. high-speed bends.
❒ SBR (Seat Belt Reminder) system; Always fasten the seat belts before Wear the rear seat belts as shown in
❒ head restraints; setting off. fig. 64.
❒ child restraint systems; The seat belt should be worn keeping
the torso straight and rested against
❒ front airbags and side bags.
the backrest.
Read the information given the
To fasten the seat belts, hold the
following pages with the utmost care. It
tongue A fig. 63 and insert it into the
is of fundamental importance that the
buckle B, until it clicks into place.
protection systems are used in the
correct way to guarantee the maximum
possible safety level for the driver and
the passengers.
For the description of the head restraint 64 J0A0169C
adjustment see paragraph "Head
restraints" in chapter "Knowing your IMPORTANT When returning the rear
vehicle". seat from the tilted position to the
normal operating position, take care to
refit the seat belt correctly, in order to
guarantee prompt availability every
63 J0A0168C
time.
On removal, if the belt jams, let it rewind
for a short stretch, then pull it out
again without jerking.
To unfasten the seat belts, press button
C and guide the seat belt with your
hand while it is rewinding, to prevent it
from twisting.
76
ADJUSTING THE SEAT SBR (Seat Belt
BELT HEIGHT Reminder) SYSTEM
WARNING
77) 78)
The SBR system warns the passengers
Five different adjustments in height are
75) Do not press button C fig. 63 while of the front and rear (where provided)
possible.
travelling. seats if their seat belt is not fastened.
To carry out height adjustment, from
76) Remember that, in the event of a The system signals unfastened seat
the top to the bottom, press button A violent collision, back-seat passengers not belts with visual warnings (warning
(located on both sides of handle B), and wearing seat belts represent a serious
lights on in the instrument panel and
slide the handle downwards. danger to the front-seat passengers as well
as to themselves. icons on the display) and an acoustic
The height adjuster moves upwards
77) The height of the seat belts must be signal (see the following paragraphs).
even without pressing the two buttons
adjusted with the vehicle stationary. NOTE To deactivate the acoustic
A.
78) After the adjustment, always check that warning permanently go to a Jeep
the cursor to which the ring is fastened is Dealership. The acoustic warning can
locked in one of the preset positions. To do be reactivated at any time through
this, with button A fig. 65 released, exert the display Menu (see the "Display"
a further pressure to allow the locking
device to click if the grip has not paragraph in the “Knowing the
been released in one of the possible instrument panel” chapter).
positions.
Operation of front seat belt
warning light
When the ignition device is turned to
MAR, warning light (see fig. 66) lights
65 J0A0151C
up for a few seconds, regardless of
Always adjust the height of the seat the status of the front belts.
belts to fit the person wearing it: this With vehicle at a standstill, if the driver
precaution could greatly reduce the risk side seat belt or the passenger side
of injury in the event of collision. seat belt (with occupant seated) is
Correct adjustment is obtained when unfastened, the warning light stays on
the belt passes approximately half way constantly.
between the shoulder and the neck.
77
Operation of rear seat belt
SAFETY
icons
60 80 The icons are shown on the display (fig.
40 100 67 versions with multifunction display
20 120 or fig. 68 versions with reconfigurable
multifunction display) after a few
0 140
seconds have elapsed since when the
km/h
MPH
ignition device is turned to MAR.
The icons turn off at least 30 seconds
66 J0A0330C after the doors have been closed or
after a change in the seat belt fastening
As soon as a speed threshold of 8 status.
km/h is maintained for more than 10 The icons shown on the display
continuous seconds (or 50 indicate:
discontinuous seconds), with driver
❒ A: rear left seat belt;
side seat belt or the passenger side
seat belt (with occupant seated) ❒ B: rear central seat belt;
unfastened, an acoustic signal is ❒ C: rear right seat belt.
activated simultaneously with warning
light flashing for about 105 seconds.
When this cycle of warnings is activated 04/07/2014 67 J0A0240C
120
it will stay on for its entire length
The icons are displayed according to
(regardless of the vehicle speed) or until
the corresponding seat belts in the rear
the seat belts are fastened again.
seats, and stay on for about 30
When the reverse is engaged, during KM/H
seconds from the last seat belt status
the cycle of warnings, the acoustic 1230 KM
change:
signal is deactivated and the warning C H E F
light turns on constantly. The cycle of ❒ if the seat belt is fastened the
68 J0A0245C corresponding icon will be green;
warnings will be reactivated as soon as
speed exceeds 8 km/h again. NOTE On versions equipped with ❒ if the seat belt is unfastened the
multifunction display, if a seat belt is corresponding icon will be red.
unfastened, icon lights up.
78
If the rear seat belt is unfastened, an PRETENSIONERS IMPORTANT To obtain the highest
acoustic warning (3 "beeps") will be degree of protection from the action of
activated along with the relevant icon 79) 80) 81) 82) 33) the pretensioner, wear the seat belt
lighting up in the display. The vehicle is equipped with front seat tight to the torso and pelvis.
Furthermore the icons will light up again belt pretensioners, which draw back LOAD LIMITERS
for 90 seconds each time one of the the seat belts by several centimetres in
rear doors is closed. To increase safety in the event of an
the event of a strong frontal impact. accident, the front seat belt retractors
The icon will turn green after the This guarantees the perfect adherence
corresponding seat has been fastened. contain a load limiter which controls the
of the seat belts to the occupant's force acting on the chest and
The rear seat icons will go out, bodies before the retention action
regardless of the state of the belt (red shoulders during the belt restraining
begins. action in the event of a head-on
icon or green icon), approximately It is evident that the pretensioners have
30 seconds after the last signal. collision.
been activated when the belt withdraws
toward the retractor. GENERAL
IMPORTANT INSTRUCTIONS FOR
This vehicle is also equipped with a USING THE SEAT BELTS
As far as the rear seats are concerned,
second pretensioner (fitted in the kick
the SBR system will only indicate Respect and ensure that all the other
plate area). Its activation is signalled by
whether the seat belts are unfastened occupants of the vehicle comply with
the shortening of the metal cable.
(red icon) or fastened (green icon), the local laws in force regarding the use
A slight discharge of smoke may be
not the presence of any passengers. of seat belts. Always fasten the seat
produced during the activation of the
The warning lights/icons are all off if all belts before setting off.
pretensioner which is not harmful and
seat belts (front and rear) are fastened Seat belts must also be worn by
does not indicate any fire hazard.
when the ignition device is at MAR. pregnant women: the risk of injury in
The pretensioner does not require any
For the rear seats, the icons will the event of an accident is reduced for
maintenance or lubrication: any
activate after a few seconds after the them and the unborn child if they are
changes to its original conditions will
ignition device has been turned to wearing a seat belt.
invalidate its efficiency.
MAR, regardless of the status of the
If, due to unusual natural events (floods,
seat belts (even if the seat belts are all
sea storms, etc.), the device has been
fastened).
affected by water and/or mud, contact
All the warning lights/icons will come on
a Jeep Dealership to have it replaced.
when at least one belt changes from
fastened to unfastened status or vice
versa.
79
Pregnant women must position the SEAT BELTS
SAFETY
lower part of the belt very low down so MAINTENANCE
that it passes over the pelvis and under For keeping the seat belts in efficient
the abdomen fig. 69. While pregnancy conditions, observe the following:
increases, the driver must adjust both ❒ always use the seat belt well
seat and steering wheel to have full stretched and never twisted; make sure
control over the vehicle (pedals and that it is free to run without
steering wheel should be easily obstructions;
accessed). The maximum clearance
❒ check seat belt operation as follows:
should be kept between the abdomen 70 J0A0149C attach the seat belt and pull it hard;
and the steering wheel.
Each seat belt must be used by only ❒ replace the belt after an accident of a
one person. Never travel with a child certain severity even if it does not
sitting on the passenger's lap and appear to be damaged. Always replace
a single belt to protect them both fig. the seat belt if the pretensioners were
71. In general, do not place any objects deployed;
between the person and the belt. ❒ to clean the seat belts, wash by hand
with water and neutral soap, rinse and
leave to dry in the shade. Never use
strong detergents, bleach, paints or any
other chemical substance which could
69 J0A0148C damage the belt fibres;
The seat belt must not be twisted. The ❒ prevent the retractors from getting
upper part must pass over the shoulder wet: their correct operation is only
and cross the chest diagonally fig. 70. guaranteed if water does not get inside;
The lower part must adhere to the ❒ replace the seat belt when it shows
pelvis, not to the abdomen of the wear or cuts.
71 J0A0150C
occupant. Never use devices (clips,
clamps, etc.) that hold the seat belt
away from your body.
80
CHILD PROTECTION Children must be seated safely and
WARNING SYSTEMS comfortably. Depending on the
characteristics of the child restraint
CARRYING CHILDREN
SAFELY systems used, you are advised to keep
79) The pretensioner may be used only
children in rearward facing child
once. Contact a Jeep Dealership to have it 83) 84) 85) 86)
replaced after it has been deployed. restraint systems for as long as
80) Removing or otherwise tampering with For optimal protection in the event of an possible (at least until 3–4 years old),
seat belt and pretensioner components impact, all occupants must be seated since this is the most protected position
is strictly prohibited. Any operations on and wearing adequate restraint in the event of an impact.
these components must be performed by The choice of the most suitable child
systems, including newborn and other
qualified and authorised technicians.
children! This prescription is restraint device depends on the weight
Always contact a Jeep Dealership.
compulsory in all EC countries and size of the child. There are various
81) For maximum safety, keep the back of
your seat upright, lean back into it and according to EC Directive 2003/20/EC. types of child restraint systems, which
make sure the seat belt fits closely across Children below the height of 1.50 can be secured to the vehicle by means
your torso and pelvis. Always fasten the metres and until 12 years, must be of the seat belts or with the ISOFIX/i-
seat belts for both the front and rear seats! Size anchorages.
protected with suitable restraint
Travelling without wearing seat belts will
systems and be seated on the rear It is recommended to always choose
increase the risk of serious injury and even
death in the event of an accident. seats. the restraint system most suitable
82) If the belt has been subjected to high Statistics on accidents indicate that the for the child; for this reason always refer
levels of stress, for example after an rear seats give a better performance to the Owner Handbook provided with
accident, it should be changed completely when protecting children safety. the child restraint system, to be sure
together with the attachments, attachment that it is of the right type for the children
Compared with an adult, a child's head
fixing screws and the pretensioner. In
is larger and heavier in proportion to it is intended for.
fact, even if the belt has no visible defects,
it may have lost its resilience. their body and the child's muscular and In Europe the characteristics of child
bone structures are not fully developed. restraint systems are ruled by the
Therefore, correct restraint systems regulation ECE-R44, dividing them into
WARNING other than adult seat belts are five weight groups:
necessary to reduce as much as Group Weight range
33) Operations which lead to impacts, possible the risk of injuries in the event
vibrations or localised heating (over 100°C of an accident, braking or sudden Group 0 up to 10 kg
for a maximum of six hours) in the area
around the pretensioner may damage or manoeuvre. Group 0+ up to 13 kg
deploy it. Contact a Jeep Dealership Group 1 9–18 kg
should intervention be necessary on these
components. Group 2 15–25 kg
Group 3 22-36 kg
81
The ECE-R44 standard was recently Group 0 and 0+
SAFETY
paired with the ECE R-129 regulation, Infants up to 13 kg must be carried with
which defines the characteristics of a rearward facing child restraint system
the new i-Size child restraint systems of a type as shown in fig. 72 which,
(see the "Suitability of passenger seats supporting the head, does not induce
for i-Size child restraint system use" stress on the neck in the event of
paragraph). sudden decelerations.
All restraint devices must bear the
certification data, together with the
control mark, on a label solidly fixed to 73 J0A0171C
the child restraint system which must
never be removed. Group 2
Lineaccessori Jeep offers child restraint Children from 15 to 25 kg may use the
systems for each weight group. These vehicle seat belts directly fig. 74.
devices are recommended, having
been specifically designed for Jeep
vehicles.
FITTING A CHILD 72 J0A0170C
RESTRAINT SYSTEM
WITH SEAT BELTS The child restraint system is secured by
the car seat belts, as shown in fig. 72
The Universal child restraint systems
and it must restrain the child in turn
installed with the seat belts only are
with its own belts.
type-approved on the basis of the ECE
R44 standard and are divided into Group 1
various weight groups. 74 J0A0172C
Children of weight from 9 to 18 kg may
IMPORTANT The figures are indicative be carried in forward facing child In this case, the child restraint system is
and provided for assembly purposes restraint systems fig. 73. used to position the child correctly
only. Fit the child restraint system with respect to the seat belts so that
according to the instructions, which the diagonal belt section crosses the
must be included. child’s chest and not the neck, and the
lower part is snug on the pelvis not
the abdomen.
82
Group 3
For children between 22 and 36 kg,
there are dedicated restraint systems
that allow the seat belt to be worn
correctly.
The fig. 75 shows the correct child
positioning on the rear seat.
75 J0A0173C
Children over 1.50 m in height can wear

seat belts like adults.
87) 88) 89)
83
PASSENGER SEAT COMPLIANCE WITH REGULATIONS ON UNIVERSAL CHILD
SAFETY
RESTRAINT SYSTEM USE
According to the European Directive 2000/3/EC the suitability of each passenger seat position for the fixing of universal child
restraint systems is shown in the following table:
Positioning the “Universal” child restraint system

Group Weight range Front passenger Rear central passenger Rear side passengers
Group 0, 0+ up to 13 kg U X U
Group 1 9–18 kg U X U
X = Seat not suitable for children in this weight category.
U = Suitable for child restraint systems in the “Universal” category, according to European Standard ECE-R44 for the specified
“Groups”.
84
FITTING A ISOFIX CHILD
RESTRAINT SYSTEM
90) 91) 92) 93)
The rear side seats of the vehicle are

equipped with ISOFIX attachments, for
fitting child restraint systems quickly,
simply and safely.
The ISOFIX system allows the ISOFIX
child restraint systems to be fitted,
without using the vehicle's seat belt,
but directly securing the child restraint
system to three anchorages present on
the vehicle. Traditional child restraint
systems can be fitted alongside ISOFIX
child restraint systems on different
seats in the same vehicle.
To install an ISOFIX child restraint
system, attach the it to the two metal
anchorages A fig. 76 located where the
rear seat cushion meets the backrest,
76 J0A0325C 77 J0A0174C
then fix the upper strap (available
together with the restraint system) to NOTE When a Universal ISOFIX child
the dedicated anchorage B located at restraint system is used, only ECE R44
the bottom behind the backrest. "ISOFIX Universal” (R44/03 or further
fig. 77 shows an example of a Universal upgrades) type-approved child restraint
ISOFIX child restraint system for weight systems can be used (see fig. 78).
group 1. The other weight groups are covered
IMPORTANT The fig. 77 is indicative by specific ISOFIX child restraint
and for assembly purposes only. Fit the systems, which can be used only if
child restraint system according to specifically tested for this vehicle (see
the instructions, which must be list of vehicles provided with the child 78 J0A0326C
included. restraint system).
85
SUITABILITY OF PASSENGER SEATS FOR ISOFIX CHILD RESTRAINT SYSTEM USE
SAFETY
The table below shows the various installation possibilities for ISOFIX child restraint systems on seats fitted with the specific
anchorages in accordance with European standard ECE 16.
ISOFIX POSITIONS ON THE VEHICLE

Weight categories Size category Device Front passenger Rear side Rear central
passengers passenger
Group 0 (up to 10 kg) E ISO/R1 X IL X
E ISO/R1 X IL X
Group 0+ (up to 13 kg) D ISO/R2 X IL X
C ISO/R3 X IL (*) X
D ISO/R2 X IL X
C ISO/R3 X IL (*) X
Group 1 (from 9 up to
18 kg) B ISO/F2 X IUF X
B1 ISO/F2X X IUF X
A ISO/F3 X IUF X
X ISOFIX position not suitable for ISOFIX child protection systems for this weight and/or size category.
IL Suitable for ISOFIX child restraint systems of the "Specific for the vehicle", "Restricted", or "Semiuniversal" categories, approved for this type of vehicle.
IL (*) The ISOFIX child restraint system can be installed by adjusting the front seat.
IUF Suitable for forward facing ISOFIX child restraint systems in the Universal category and type-approved for the use in the weight group.
86
SUITABILITY OF NOTE The vehicle seats, i-Size
PASSENGER SEATS FOR type-approved, are marked by the
i-Size CHILD RESTRAINT symbol shown in fig. 79.
SYSTEM USE
The rear side seats of the vehicle are
type-approved to house the state-
of-the-art i-Size child restraint systems.
These child restraint systems, built
and type-approved according to the
i-Size (ECE R129) standard, ensure
better safety conditions to carry
children on board a vehicle:
❒ the child must be transported
rearward facing until 15 months; 79 J0A0450C
❒ child restraint system protection is

increased in the event of a side
collision;
❒ the use of the ISOFIX system is
promoted to avoid faulty installation of
the child restraint system;
❒ efficiency in the choice of the child
restraint system, which isn't made
according to weight anymore but
according to the child's height,
is increased;
❒ compatibility between the vehicle
seats and the child restraint systems is
better: the i-Size child restraint systems
can be considered as "Super ISOFIX",
this means that they can be perfectly
fitted in the type-approved i-Size seats,
but can also be fitted in the ISOFIX
(ECE R44) type-approved seats.
87
The following table, according to European legislation ECE 129, indicates the possibility to install i-Size child restraint systems.
SAFETY
i-Size POSITIONS ON THE VEHICLE
Device Front passenger Rear side Rear central
passengers passenger
ISO/R2 X i-U X
i-Size child restraint systems
ISO/F2 X i-U X
i-U: suitable for Universal i-Size child restraint systems, both rearward facing and forward facing.
X: seat not suitable for Universal i-Size child restraint systems.
CHILD RESTRAINT SYSTEMS RECOMMENDED BY JEEP FOR YOUR JEEP
RENEGADE
Lineaccessori Jeep includes a complete range of child restraint systems to be fixed using the seat belt with three anchorage
points or the ISOFIX anchorages.
Weight group Child restraint system Type of child restraint system Child restraint system installation
Peg Perego Primo Viaggio SL

Type-approval number: E24
040089
Universal/ISOFIX child restraint system.
It must be installed rearward facing,
using the vehicle seat belts only, or the
Group 0+: from 0 to dedicated ISOFIX K base (which can
13 kg be purchased separately) and the
vehicle ISOFIX anchorages.
It must be fitted on the rear outer
seats.
ISOFIX K base
88
Fair G0/1S
Type-approval number: E4
04443718
Universal/ISOFIX child restraint system.

+ + It can be fitted forward facing/rearward
facing using only the vehicle seat belts
or the Isofix anchorages.
Jeep recommends fitting it using the
rearward facing ISOFIX platform (RWF
Fair ISOFIX RWF platform, specific for Jeep Renegade - to be
Group 1: from 9 up Jeep Renegade type specific purchased separately) or the forward
to 18 kg for G0/1S facing ISOFIX platform (FWF specific
or for Jeep Renegade - to be purchased
Fair ISOFIX FWF platform, separately), the rigid head restraint (to
Jeep Renegade type specific be purchased separately) and the
for G0/1S ISOFIX anchorages for the vehicle.
It must be fitted on the rear outer
seats.
+ +
FAIR head restraint
89
SAFETY
Fair Junior Fix It can only be fitted facing forwards,

Group 2: from 15 kg Type-approval number: E4 using the three-point seat belt and the
to 36 kg 04443721 ISOFIX anchorages of the vehicle, if
present.
IMPORTANT Jeep recommends fitting the child restraint system according to the instructions, which must be included.
Main recommendations to carry ❒ Carefully follow the child restraint ❒ Never carry children on your lap,
children safely manufacturer's instruction supplied with even newborns. No-one could restrain
❒ Install the child restraint systems on the child restraint system. Keep the them in the event of an accident.
the rear seat, which is the most instructions in the vehicle along with the ❒ In the event of an accident, replace
protected position in the event of an other documents and this handbook. the child restraint system with a new
impact. Do not use second-hand child restraint one.
❒ Keep children in rearward facing child systems without instructions.
restraint systems for as long as ❒ Only one child is to be strapped into
possible, until 3–4 years old if possible. each restraint system; never carry WARNING
❒ If the passenger's front airbag is two children using one child restraint
deactivated always check the system.
83) SEVERE DANGER When a front
dedicated warning light on the panel ❒ Always check that the seat belts do passenger airbag is fitted, do not install
located on the dashboard to make sure not rest on the child’s neck. rearward facing child restraint systems on
the front passenger seat. Deployment of
that it has actually been deactivated. ❒ Always check that the seat belt is the airbag in an accident could cause fatal
well fastened by pulling on it. injuries to the baby regardless of the
❒ While travelling, do not let the child sit severity of the collision. It is advisable to
always carry children in a child restraint
incorrectly or unfasten the belts.
system on the rear seat, which is the most
❒ Never allow a child to put the belt's protected position in the event of an
diagonal section under an arm or impact.
behind their back.
90
84) On the sun visor there is a label with 88) When the child restraint system is not SUPPLEMENTARY
suitable symbols reminding the user that it used, secure it with the seat belt or with RESTRAINT SYSTEM
is compulsory to deactivate the airbag if the ISOFIX anchorages, or remove it from
a rearward facing child restraint system is the vehicle. Do not leave it unsecured (SRS) - AIRBAG
fitted. Always comply with the instructions inside the passenger compartment. In this The vehicle is equipped with:
on the passenger's side sun visor (see way, in the case of sudden braking or an
the "Supplementary Restraint System accident, it will not cause injuries to the ❒ front driver airbag;
(SRS) - Airbag" paragraph). occupants. ❒ front passenger airbag;
85) Should it be necessary to carry a child 89) After installing a child restraint system, ❒ driver and passenger front side bags
on the passenger side front seat in a rear do not move the seat: always remove
facing child restraint system, the passenger the child restraint system before making for pelvis, chest and shoulder
side front airbag and side bag must be any adjustment. protection (Side bags);
deactivated through the display main menu 90) Always make sure that the chest ❒ front and rear side passenger side
(see the instructions in the "Display" section of the seat belt does not pass bags for head protection (window bag).
paragraph, "Knowing the instrument panel" under the arms or behind the back of the
chapter), verifying activation by checking child. In the event of an accident the seat FRONT AIRBAGS
whether the OFF LED has switched on belt will not be able to secure the child,
in the panel located on the dashboard. The front driver/passenger airbags and
with the risk of injury, including fatal injury.
Move the passenger's seat as far back as Therefore the child must always wear the driver's knee bag (where provided)
possible to avoid contact between the child the seat belt correctly. protect the front seat occupants in
restraint system and the dashboard. the event of frontal impacts of
91) Do not use the same lower anchorage
86) Do not adjust the front or rear seat if a to install more than one child protection medium/high severity, by placing the
child is seated on it or on the dedicated system.
child restraint system.
bag between the occupant and the
92) If a Universal ISOFIX child restraint steering wheel or dashboard.
87) Incorrect fitting of the child restraint system is not fixed to all three anchorages,
system may result in an inefficient Therefore non-activation in other types
it will not be able to protect the child
protection system. In the event of an correctly. In a crash, the child could be
of collisions (side impacts, rear shunts,
accident the child restraint system may seriously or fatally injured. roll-overs, etc.) does not indicate a
become loose and the child may be system malfunction.
injured, even fatally. When fitting a restraint 93) Fit the child restraint system only when
system for newborns or children, strictly the vehicle is stationary. The child restraint Driver and passenger front airbags are
comply with the instructions provided system is correctly fixed to the brackets not a replacement of but
by the Manufacturer. when you hear the click. Follow the complementary to the seat belts, which
instructions for assembly, disassembly and
positioning that the Manufacturer must
should always be worn, as specified
supply with the child restraint system. by law in Europe and most non-
European countries.
91
In the event of impact, those not Passenger side front airbag
SAFETY
wearing a seat belt are projected and child restraint systems
forwards and may come into contact Rearward facing child restraint systems
with the bag which is still inflating. The must NEVER be fitted on the front
protection offered by the bag is seat with an active passenger side
compromised in these circumstances. airbag since in the event of an impact
The front airbags may not activate in the airbag activation may cause fatal
the case of a frontal impact against injuries to the transported child.
highly deformable objects not involving ALWAYS comply with the instructions
the front surface of the vehicle (e.g. 80 J0A0176C on the label stuck on the passenger
wing collision against guard rail) or in side sun visor fig. 82.
the case of the vehicle wedging under Passenger side front airbag
other vehicles or protective barriers 96)
(e.g. under trucks or guard rails). This consists of an instantly inflating
Failure to activate in the conditions bag contained in a special recess in the
described above is due to the fact that dashboardfig. 81, this bag has a larger
they may not provide any additional volume than that of the driver's.
protection compared with seat belts, so
their activation would be inappropriate.
In these cases, non-deployment does
not indicate a system malfunction.
82 J0A0190C
Driver's side front airbag
94) 95)
This consists of an instantly inflating
cushion contained in a special
compartment in the centre of the
steering wheel fig. 80. 81 J0A0177C
92
Deactivating the passenger
side airbags: front airbag
and side bag
If a child must be carried on the front
seat in a rearward facing child restraint
system, deactivate the passenger
side front airbag and front side bag.
Use the display Menu to deactivate.
The LEDs OFF and ON are on
the dashboard trim. Moving the ignition 83 J0A0051C
device to MAR, the two LEDs switch
on for a few seconds. Otherwise, Passenger protection activated: the
contact a Jeep Dealership. LED ON fig. 83 switches on.
During the first seconds, the activation Passenger protection deactivated:
of the LEDs does not actually show the LED OFF fig. 83 switches on.
the passenger protection status, but The LEDs may light up with various
only checks its correct operation. After intensity levels depending on the
a test of a few seconds, the LEDs vehicle conditions. The intensity may
will indicate the status of the passenger vary during the same key cycle.
airbag protection.
93
Passenger front airbag and child restraint system: WARNING
SAFETY
84 J0A0215
94
SIDE BAGS Important
To help increase occupants protection Do not wash the seats with water or
in the event of side impact collisions, pressurised steam (wash by hand or at
the vehicle is equipped with front side automatic seat washing stations).
bags and window bags. The front and/or side airbags
may activate in the event of sharp
Side bags
impacts to the underbody of the vehicle
These comprise two bags located in (e.g. impact with steps, pavements,
the front seat backrests fig. 85 which potholes or road bumps etc.).
protect the pelvis, chest and shoulder When the airbag deploys it emits a
area of the occupants in the event small amount of dust: the dust is
of a side impact of medium/high harmless and does not indicate the
severity. They are marked by the beginning of a fire. The dust may irritate
"AIRBAG" label sewn on the outer side the skin and eyes however: in this
of the front seats. case, wash with neutral soap
Window bag and water.
Airbag checking, repair and
This comprises a "curtain" bag housed replacement must be carried out at a
behind the roof side linings and covered Jeep Dealership.
by special trims fig. 86. They are If the vehicle is scrapped, have the
designed to protect the head of front 85 J0A0178C
airbag system deactivated at a Jeep
and rear occupants in the event of Dealership.
a side collision, thanks to the Pretensioners and airbags are deployed
wide cushion inflation surface. according to different logics on the
The deployment of side bags in the basis of the type of collision. Failure to
event of side impacts of low severity is deploy of one of the devices does
not required. not necessarily indicate a system
In the event of a side impact, the malfunction.
system provides best protection if the
passenger sits on the seat in a correct
position, thus allowing correct window 86 J0A0180C
bag deployment.
97) 98) 99) 100) 101) 102) 103) 104) 105) 106) 107)
108)
95
105) If the ignition device is at MAR, even if
SAFETY
98) Do not rest your head, arms or elbows
on the door, windows or the area in which the engine is switched off, airbags may
WARNING the window bag is located to avoid be deployed when the vehicle is stationary
possible injury during inflation. and hit by another vehicle. Therefore,
even if the vehicle is stationary, when an
94) Do not apply stickers or other objects 99) Never lean head, arms and active front passenger airbag is fitted, DO
on the steering wheel, on the dashboard in elbows out of the window NOT install rearward facing child restraint
the passenger side airbag area, on side
systems on the front passenger seat.
upholstery on the roof or on the seats. 100) If the warning light does not Deployment of the airbag following an
Never put objects (e.g. mobile phones) on switch on when the ignition device is impact could cause fatal injuries to the
the passenger's side dashboard since moved to MAR or if it stays on when child. Therefore, always deactivate the
they could interfere with correct inflation of driving, there might be a fault in the passenger side airbag when a rearward
the airbag and also cause serious injury restraint systems; in this case, the airbags facing child restraint system is installed on
to the passengers. or pretensioners may not deploy in the the front passenger seat. The front
95) Always drive keeping your hands on event of an accident or, in a lower number passenger seat must also be positioned
the steering wheel rim so that the airbag of cases, they could deploy erroneously. back as far as possible in order to prevent
can inflate freely if necessary. Do not drive Before proceeding, contact a Jeep the child restraint system from coming
with your body bent forward. Keep your Dealership immediately to have the system into contact with the dashboard.
back straight against the backrest. checked. Immediately reactivate the passenger
96) When an active passenger airbag is 101) On some versions, if the OFF LED airbag as soon as the child restraint system
fitted, DO NOT install rearward facing child (located on the dashboard panel) is faulty, has been removed. Finally, remember that
restraint systems on the front passenger warning light lights up in the instrument if the ignition device is at STOP, no safety
seat. Deployment of the airbag in an panel. device (airbags or pretensioners) will
accident could cause fatal injuries to the 102) If a side bag is present, do not cover activate following an impact; therefore if
child regardless of the severity of the the front seat backrests with extra covers. these devices do not activate this cannot
impact. Therefore, always deactivate the be considered as signal of the system
103) Do not travel carrying objects in malfunction.
passenger side airbag when a rearward
your lap, in front of your chest or between
facing child restraint system is installed on 106) If the airbag failure warning light is
your lips (pipe, pencils, etc.). They could
the front passenger seat. The front faulty this will be signalled by an airbag
cause severe injury if the airbag is
passenger seat must also be positioned failure icon lighting up in the instrument
deployed.
back as far as possible in order to prevent panel display with a dedicated message.
the child restraint system from coming 104) If the has been subject to theft, The pyrotechnic charges are not disabled.
into contact with the dashboard. attempted theft, vandalism, or flooding, Before proceeding, contact a Jeep
Immediately reactivate the passenger have the airbag system inspected at a Dealership immediately to have the system
airbag as soon as the child restraint system Jeep Dealership. checked.
has been removed.
107) The front airbag deployment threshold
97) Do not hook rigid objects to the coat is higher than that of the pretensioners.
hooks and to the support handles. When the impact is between the two
deployment thresholds, it is normal that
pretensioners only are engaged.
96
108) The airbag does not replace seat
belts, but increases their efficiency.
Because front airbags are not deployed for
low-speed crashes, side collisions,
rear-end shunts or rollovers, occupants are
protected, in addition to any side bags,
only by their seat belts, which must
therefore always be fastened.
97
STARTING AND DRIVING
Let’s get to the "heart" of the vehicle: STARTING THE ENGINE ................. 99
seeing how you can exploit all of its ELECTRIC PARKING BRAKE (EPB).100
potential to the full.
MANUAL GEARBOX .......................103
We’ll look at how to drive it safely in any
situation, so that it can be a welcome AUTOMATIC TRANSMISSION.........103
companion, with our comfort and STOP/START SYSTEM ...................106
our wallets in mind.
SPEED LIMITER..............................107
ELECTRONIC CRUISE CONTROL ..108
FOUR WHEEL DRIVE - JEEP
ACTIVE DRIVE (4WD) AND JEEP
ACTIVE DRIVE LOW (4WD LOW) ....109
SELEC-TERRAIN ............................111
PARKSENSE SYSTEM ....................112
LANESENSE SYSTEM (LANE
CROSSING WARNING)...................114
REAR CAMERA (PARKVIEW®
REAR BACKUP CAMERA) ..............115
TOWING TRAILERS ........................117
REFUELLING THE VEHICLE ...........120
98
STARTING THE ❒ if the engine does not start within 10 STOPPING THE ENGINE
ENGINE seconds, bring the ignition device Proceed as follows:
back to STOP and wait for 10-15
❒ park the car in a position that is not
seconds before repeating the starting
dangerous for oncoming traffic; engage
Before starting the engine, adjust the procedure.
a gear (versions with manual gearbox)
seat, the interior rear view mirrors, PROCEDURE FOR or position the gear lever to P (Parking)
the door mirrors and fasten the seat VERSIONS WITH (versions with automatic transmission);
belt correctly. AUTOMATIC
TRANSMISSION ❒ turn the ignition device to STOP
Never press the accelerator pedal for
with the engine idling.
starting the engine. Proceed as follows:
If necessary, messages indicating the ❒ engage the electric parking brake Cars equipped with electronic key
starting procedure can be shown on and place the gear lever to P (Park) or (Keyless Enter-N-Go): at a car speed
the display. N (Neutral); over 8 km/h (5 mph) it is possible to
❒ fully depress the brake pedal without switch the engine off, also with
109) 110) 111) 34) 35) 36) 37)
touching the accelerator; automatic transmission lever in a
PROCEDURE FOR position other than P (Parking). To
VERSIONS WITH MANUAL ❒ place the ignition device to AVV;
GEARBOX switch off the engine in this situation,
❒ if the engine does not start, bring the hold down the ignition device button for
Proceed as follows: ignition device back to STOP and a while or press it 3 times in a row
❒ engage the electric parking brake wait for 10-15 seconds before within a few seconds. In this case the
and place the gear lever in neutral; repeating the starting procedure. engine will stop and the ignition device
❒ bring the ignition device to MAR. On IMPORTANT If, with the ignition device will switch to MAR.
Diesel versions, waning light lights at MAR, the symbol on the
up in the instrument panel: wait for the instrument panel stays on together with
warning light to switch off; warning light , turn the ignition WARNING
❒ fully depress the clutch pedal without device to STOP and then back to MAR.
touching the accelerator; If the warning light (or the symbol on 109) It is dangerous to run the engine in
enclosed areas. The engine takes in
❒ turn the ignition device to AVV and the display) remains on, try with the
oxygen and releases carbon dioxide,
release it as soon as the engine starts; other keys provided with the vehicle. carbon monoxide and other toxic gases.
Contact a Jeep Dealership if the engine 110) The brake servo is not active until the
still does not start. engine is started, so you would need to
apply much more force than usual to the
brake pedal.
99
111) Do not start the engine by pushing, ELECTRIC PARKING IMPORTANT In addition to parking the

towing or driving downhill. These BRAKE (EPB) vehicle with the parking brake always
manoeuvres may damage the catalytic
converter.
engaged, the wheel steered, chocks or
The electric parking brake (EPB)
stones positioned in front of the wheels
guarantees better use and optimal
(when on a steep slope), a gear must
performance compared to a manually
WARNING always be engaged (the 1st gear with
operated parking brake.
the vehicle parked uphill or the reverse
The electric parking brake features a
34) In the first period of use, i.e. in the first gear with the vehicle parked downhill).
switch, located on the central tunnel fig.
1,600 km (1,000 miles), we recommend On versions with automatic
not to demand maximum performance 87, a motor with caliper for each rear
transmission, place the gear lever at P
from the vehicle (for instance excessive wheel and an electronic control module.
(Park).
accelerations, extended travel at maximum
speed, sudden braking, etc.).
IMPORTANT Should the vehicle battery
35) With the engine off, do not leave the be faulty, to unlock the electric parking
ignition device at MAR to prevent the
battery from draining. brake the battery must be replaced.
36) A quick burst on the accelerator before
The electric parking brake can be
turning off the engine serves absolutely engaged in two ways:
no practical purpose; it wastes fuel and is ❒ manually, by pressing the switch on
damaging for the engine. the central tunnel fig. 87;
37) Warning light will flash after
starting or during prolonged cranking to
❒ automatically in "Safe Hold" or "Auto
indicate a fault with the glow plug heating 87 J0A0281C Park Brake" conditions.
system. If the engine starts, the vehicle can
be regularly used, but a Jeep Dealership IMPORTANT Always engage the Engaging the parking brake
must be contacted as soon as possible.
manually
electronic parking brake before leaving
the vehicle. 112) 113) 114)
Briefly pull the switch located on the

central tunnel to manually engage the
electric paring brake when the vehicle is
stationary.
Noise may be heard from the rear of the
vehicle when engaging the electric
parking brake.
100
A slight movement of the brake pedal If, through this procedure, the vehicle is IMPORTANT On versions with
may be detected when engaging the braked until a speed below 3 km/h is automatic transmission never use the P
electric parking brake with the brake reached and the switch is kept pulled, (Park) position instead of the electric
pedal pressed. the parking brake will definitively parking brake. Always engage the
With the electric parking brake engage. electric parking brake when parking the
engaged, the warning light on the vehicle to prevent injury or damage
instrument panel and the LED on the IMPORTANT Driving the vehicle with caused by the unexpected movement
switch turn on. the electric parking brake engaged, or of the vehicle.
using it several times to slow down
IMPORTANT With the EPB failure the vehicle, may cause severe damage IMPORTANT For vehicles equipped
warning light on, some functions of the to the braking system. with manual gearbox, if the clutch pedal
electric parking brake are deactivated. is released simultaneously with the
Disengaging the electric
In this case the driver is responsible parking brake manually press of the accelerator, the electric
for brake activation and vehicle parking handbrake automatically releases.
in complete safety conditions. To manually disengage the parking
brake, the ignition device must be at ELECTRIC PARKING
If, under exceptional circumstances, the BRAKE OPERATING
use of the brake is required with the MAR. It is also necessary to press the MODES
vehicle in motion, keep the switch on brake pedal, then slightly press the
switch on the central tunnel. The electric parking brake may operate
the central tunnel pulled as long as the as follows:
brake action is necessary. Noise may be heard from the rear of the
vehicle and a slight movement of the ❒ "Dynamic operating mode": this
The warning light may switch on
brake pedal may be detected during mode is activated by pulling the switch
with the hydraulic system temporarily
disengagement. repeatedly whilst deriving;
unavailable; in this case braking is
controlled by the motors. With the electric parking brake ❒ "Static engagement and release
The brake lights (stop) will also engaged, the warning light on the mode": with the vehicle stationary, the
automatically switch on in the same instrument panel and the LED on the electric parking brake can be activated
way as for normal braking with the use switch turn off. by pulling the switch on the central
of the brake pedal. If the warning light on the tunnel once. On the other hand, press
Release the switch on the central tunnel instrument panel remains on with the the switch and the brake pedal at
to stop the braking action with the electric parking brake disengaged, this the same time to disengage the brake;
vehicle in motion. indicates a fault: in this case contact
a Jeep Dealership.
101
❒ "Drive Away Release": (where ❒ "Auto Park Brake": if the vehicle ❒ no attempted operation of the brake

available) the electric parking brake will speed is lower than 3 km/h, the electric pedal or, on versions with manual
automatically disengage with the driver parking brake will automatically engage gearbox, the clutch pedal or the
side seat belt fastened and the with the gear lever moved to P (Park) accelerator pedal is detected;
detection of an action performed by the position (versions with automatic the parking brake engages
driver to move the vehicle (forward transmission), or with the ignition device automatically to prevent the vehicle
gear or reverse gear); at STOP (versions with manual movement.
❒ "Safe Hold": when the vehicle speed gearbox). The LED on the switch fig. 87 The Safe Hold function can be
is lower than 3 km/h, the gear lever is located on the central tunnel switches temporarily disabled by pressing the
not at P (Park) on versions with on together with the warning light switch located on the central tunnel
automatic transmission and when the on the instrument panel when the and the brake pedal at the same time,
intention of the driver to leave the parking brake is engaged and applied with the vehicle stationary and the
vehicle is detected, the electric parking to the wheels. Each automatic parking driver side door open.
brake will automatically engage so brake engagement can be cancelled by Once disabled, the function will activate
that the vehicle is in safe conditions. pressing the switch on the central again when the vehicle speed reaches
tunnel and moving at the same time the 20 km/h or the ignition device is moved
gear lever for the automatic to STOP and then to MAR.
transmission to position P (Park) or the
ignition device to STOP (versions with
manual gearbox). WARNING
SAFE HOLD
112) In the case of parking manoeuvres on
It is a safety function that automatically
roads on a gradient, the front wheels
engages the electric parking brake in must be steered towards the pavement
the event of a dangerous condition for (when parking downhill), or in the opposite
the vehicle. direction if the vehicle is parked uphill. If
If: the vehicle is parked on a steep slope, it is
advisable to block the wheels with a
❒ the vehicle speed is below 3 km/h; wedge or stone.
❒ the gear lever is not at P (Park) 113) Never leave children unattended in
(versions with automatic transmission); the vehicle. Always remove the key from
the ignition device when leaving the vehicle
❒ the driver's seat belt is not fastened; and take it with you.
❒ the driver side door is open; 114) The electric parking brake must
always be engaged when leaving
the vehicle.
102
MANUAL GEARBOX IMPORTANT Reverse can only be AUTOMATIC
engaged when the vehicle is completely TRANSMISSION
115) 38) stationary. With the engine running,
To engage the gears, press the clutch wait for at least 2 seconds with the
pedal fully and put the gear lever into clutch pedal fully pressed before The vehicle can be equipped with a
the required position (the diagram engaging reverse to prevent damage to 9-speed automatic transmission.
for gear engagement is shown on the the gears and grating. The transmission can operate in two
knob ). different modes: "Automatic mode" or
To engage reverse R from neutral, lift IMPORTANT The clutch pedal should "Sequential mode".
the ring A under the knob and at the be used only for gear changes. Do
not drive with your foot resting on the GEAR LEVER
same time move the lever to the left
and then forwards. clutch pedal, however lightly. In some The lever has the following positions:
circumstances, the electronic clutch ❒ P = Park
control could cut in by interpreting the
❒ R = Reverse
incorrect driving style as a fault.
❒ N = Neutral
❒ D = Drive, (automatic forward speed)
WARNING ❒ AutoStick: + shifting to higher gear
in sequential driving mode; – shifting
115) Depress the clutch pedal fully to to lower gear in sequential driving
change gear correctly. It is therefore mode.
essential that there is nothing under the
pedals: make sure the mats are lying
88 J0A0183C flat and do not get in the way of the
pedals.
To engage 6th gear, operate the lever
by pressing it towards the right in order
to avoid engaging 4th gear by mistake. WARNING
The same applies to the shift from
6th to 5th gear. 38) Do not drive with your hand resting on
the gear lever as the force exerted, even
if slight, could lead over time to premature
wear of the gearbox internal components. 89 J0A0146C
The gear engaged is shown on the

display.
116) 117) 118) 119) 120)
103
To select a gear, press button A fig. 89 AutoStick - Sequential TRANSMISSION

and move the lever forwards or shifting mode EMERGENCY FUNCTION
backwards. (where provided)
In the case of frequent gearshiftings
If the transmission is used in (e.g. when the vehicle is driven with a Transmission operation is constantly
"sequential" mode, which is activated heavy load, on slopes, with strong monitored to detect any fault. If a
moving the lever from D (Drive) to headwind or when towing heavy condition that might damage the
the left, the various positions can be trailers), it is recommended to use the transmission is detected, the
reached towards + or – . These AutoStick (sequential shifting) mode "transmission emergency" function is
positions are unstable. to select and keep a lower fixed ratio. activated.
To exit position P (Park), or to pass from It is possible to shift from position D In this condition, the transmission stays
position N (Neutral) to position D (Drive) (Drive) to the sequential mode in 4th gear, regardless of the selected
or R (Reverse) when the vehicle is regardless of vehicle speed. gear.
stopped or is moving at a low speed, Positions P (Parking), R (Reverse) e N
the brake pedal must be pressed either Activation (Neutral) still work. Icon might light
(see "Gear engagement disabling With gear lever in position D (Drive), to up in the display
system with brake engaged" in this activate the sequential drive mode, In the event of a "transmission
chapter). move the lever to the left (– and + emergency" immediately contact the
indication of the trim). The gear nearest Jeep Dealership.
IMPORTANT DO NOT accelerate while engaged will be shown on the display.
shifting from position P (or N) to another Temporary failure
Gearshifting is made by moving the
position. gear lever forwards, towards symbol – In the event of a temporary failure, the
or backwards, towards symbol +. transmission correct operation can
IMPORTANT After selecting a gear, wait be restored for all the forwards gears by
a few seconds before accelerating. Deactivation proceeding as follows:
This precaution is particularly important Bring the gear lever back in position D ❒ stop the vehicle;
with engine cold. (Drive) ("automatic" driving mode). ❒ bring the transmission lever to P
(Park).
❒ bring the ignition device to STOP;
❒ wait for about 10 seconds, then
restart the engine;
❒ select the desired gear: if the
problem is not detected anymore the
transmission correct operation is
restored.
104
IMPORTANT In the event of a GEAR ENGAGEMENT 119) Before moving the gear lever from
temporary failure it is anyway DISABLING SYSTEM position P, bring the ignition device to
recommended to contact a Jeep WITHOUT BRAKE PEDAL position MAR and press the brake pedal.
PRESSED Otherwise the gear lever might be
Dealership as soon as possible. damaged.
This system prevents you from moving
IGNITION LOCK AND 120) Engage the reverse gear only with
PARK POSITION the gear lever from position P (Park) if vehicle at a standstill, engine idling and
the brake pedal has not been previously accelerator completely released.
Versions equipped with the Keyless depressed.
Enter-N-Go system: this function To bring the gear lever to a position
requires the gear lever to be positioned other than P (Park), the ignition device
to P (Park) before bringing the ignition must be in position AVV (engine on
device to position STOP. or off) and the brake pedal must be
Versions equipped with mechanical depressed.
key: this function requires the gear
lever to be positioned to P (Park) before
extracting the key from the ignition
WARNING
device.
If the vehicle battery is flat and the
ignition key is engaged, the latter is 116) Never use position P instead of the
electric parking brake. When the vehicle is
locked in position. To remove the key parked, always engage the electric parking
manually see paragraph "Automatic brake to prevent accidental movements
transmission lever unlock" in chapter "In of the vehicle.
an emergency". 117) If position P is not engaged the
vehicle might move and hurt people.
Before leaving the vehicle make sure that
the gear lever is in position P and the
electric parking brake is engaged.
118) Do not position the gear lever to N,
nor switch off the engine to travel
downhills. This type of driving is dangerous
and reduces the possibility of intervening
in the case of variation of the road traffic or
surface. You risk to lose control of your
vehicle and cause accidents.
105
STOP/START Engine restarting mode SYSTEM MANUAL

SYSTEM ACTIVATION/
Versions with manual gearbox DEACTIVATION
To restart the engine, press the clutch To activate/deactivate the system
pedal. manually, press the button on the
The Stop/Start system automatically
If the vehicle does not start pressing the central tunnel fig. 90.
stops the engine each time the vehicle
clutch, place the gear lever in neutral
is stationary and starts it again when
and repeat the procedure. If the
the driver wants to move off.
problem persists, contact a Jeep
In this way, the vehicle efficiency is
Dealership.
increased, by reducing consumption,
dangerous gas emissions and noise Versions with automatic transmission
pollution.
To restart the engine, release the brake
121) 122) 39)
pedal.
OPERATING MODES With brake pressed, if the gear lever is
Engine stopping mode in automatic mode - D (Drive) - the
engine can be restarted moving the 90 J0A0134C
Versions with manual gearbox
lever to R (Reverse) or N (Neutral)
With the vehicle stopped, the engine or "AutoStick". ❒ LED off: system deactivated;
stops with gearbox in neutral and With brake pressed, if the gear lever is ❒ LED on: system deactivated.
clutch pedal released. in "AutoStick" mode, the engine can be
restarted moving the lever to "+" or
Versions with automatic transmission
"–", or R (Reverse) or N (Neutral). WARNING
With vehicle at a standstill and brake When the engine has been stopped
pedal pressed, the engine switches off automatically, keeping the brake pedal 121) When replacing the battery, always
if the gear lever is in a position other pressed, the brake can be released contact a Jeep Dealership. The
than R. keeping the engine off by quickly replacement battery should be of the same
In the event of stops uphill, the engine shifting the gear lever to P (Park). type (HEAVY DUTY) and should have the
switching off is disabled to activate To restart the engine, just move the same characteristics.
the "Hill Start Assist" function (works lever out of position P.
only with running engine).
The warning light on the instrument
panel switches on to signal that the
engine was stopped.
106
122) Before opening the bonnet, make SPEED LIMITER The buttons on the steering wheel
sure that the vehicle is switched off and operate as follows:
that the ignition device is in the STOP
position. Follow the indications on the plate ❒ SET +: limit speed programming
underneath the bonnet. We recommend DESCRIPTION (storage of a higher speed value);
that you remove the key from the ignition if
other people remain in the vehicle. The This device allows the speed of the ❒ SET –: limit speed programming
vehicle should always be left after the key vehicle to be limited to values which (storage of a lower speed value);
has been removed or turned to the STOP can be set by the driver. ❒ RES: device activation (the actuation
position. During refuelling, make sure The maximum speed can be set both of the device is signalled by the
that the engine is off (ignition device in the
with vehicle stationary and in motion. displaying of symbol (green on
STOP position).
The minimum speed that can be set is versions with reconfigurable
30 km/h. multifunction display).
WARNING When the device is active, the vehicle ❒ CANC: deactivation of the device
speed depends on the pressure at (the deactivation of the device is
39) If climate comfort is to be favoured, the the accelerator pedal, until the set signalled by the displaying of symbol
Stop/Start system can be deactivated, speed limit is reached. (white);
for a continuous operation of the climate
ACTIVATING THE DEVICE
control system. Automatic deactivation of
To activate the device press button A device
fig. 91 on the steering wheel. The device deactivates automatically in
the event of fault in the system. In this
case, contact a Jeep Dealership.
91 J0A0137C
107
ELECTRONIC IMPORTANT Before pressing buttons

CRUISE CONTROL SET + (or SET –) the vehicle must
be travelling at a constant speed on a
flat surface.
DESCRIPTION INCREASING/
This is an electronically controlled DECREASING SPEED
driving assistance device that allows Once the electronic Cruise Control has
the desired vehicle speed to be been activated, the speed can be
maintained, without having to press the increased by pressing button SET + or
accelerator pedal. 92 J0A0144C decreased by pressing button SET – .
This device can be used at a speed ACCELERATING WHEN
IMPORTANT It is dangerous to leave
above 40 km/h on long stretches of dry, OVERTAKING
the device on when it is not used. There
straight roads with few variations (e.g.
is a risk of inadvertently activating it Depress the accelerator pedal: when
motorways). It is therefore not
and losing control of the vehicle due to this is released the vehicle will gradually
recommended to use this device on
unexpected excessive speed. go back to the stored speed.
extra-urban roads with traffic. Do not
use it in town. SETTING THE DESIRED
SPEED IMPORTANT The device keeps the
ACTIVATING THE DEVICE speed stored even uphill and downhill.
Insert the device and then, when the A slight variation in the speed on slight
123) 124) 125)
vehicle has reached the desired speed, rises is completely normal.
To activate the Cruise Control press press button SET + (or SET –) and
button fig. 92. If the Speed Limiter is release it to activate the device. RECALLING THE SPEED
activated, button must be pressed When the accelerator is released, the To restore the set speed, press and
twice to activate the device (the first vehicle will proceed at the selected release the RES button.
press deactivates the Speed Limiter, speed. DEACTIVATING THE
the second press activates the Cruise If needed (when overtaking for DEVICE
Control). instance), you can accelerate simply by
The device cannot be engaged in 1st or Lightly pressing the brake pedal,
pressing the accelerator; when you
reverse gear: it is advisable to engage pressing the CANC button or pressing
release the pedal, the vehicle goes
it in 3rd gear or higher. the brake pedal as the vehicle is
back to the speed stored previously.
slowing down deactivate the electronic
When travelling downhills with the
Cruise Control without deleting the
device active, the vehicle speed may
stored speed.
slightly exceed the stored one.
108
DEACTIVATING THE FOUR WHEEL DRIVE
DEVICE JEEP ACTIVE
The device is deactivated by pressing DRIVE (4WD) and
button or bringing the ignition JEEP ACTIVE DRIVE
device to STOP. LOW (4WD LOW)
ALL-WHEEL DRIVE
WARNING The four wheel drive (4WD) is fully
automatic in standard driving mode.
123) While travelling with the device
activated, do not move the gear lever to IMPORTANT Changing mode is not
neutral. possible when the vehicle speed is over
124) In the event of device faults or failures, 120 km/h.
go to a Jeep Dealership.
Four wheel drive activation
125) The electronic Cruise Control can be
dangerous if the system cannot keep a 40) 41)
constant speed. In specific conditions The buttons to activate the four wheel
speed may be excessive, resulting in the
risk of losing control of the vehicle and drive are located on the device
causing accidents. Do not use the device Selec-Terrain™ and can select:
in heavy traffic or on winding, icy, snowy or ❒ 4WD LOCK (fig. 93 versions with
slippery roads. 93
manual gearbox and automatic J0A0155C
translation): deactivates the function for

The 4WD LOCK function can be
disconnecting the propeller shaft,
activated by pressing the dedicated
guaranteeing the immediate availability
button or when the selector is rotated
of the torque to the rear coupling.
from AUTO to SNOW/SAND/MUD
This function can be selected in AUTO
or ROCK (Trailhawk versions) and 4WD
mode and in the other driving modes.
LOW was not selected before.
❒ 4WD LOW (fig. 94 versions with The engagement of one function (e.g.
automatic transmission): it enhances 4WD LOW) deactivates the other one
the "off-road" performance of the automatically.
vehicle in all driving modes;
109
4WD LOW MODE 41) Do not drive at speeds exceeding

ENGAGEMENT/RELEASE those permitted by the conditions of the
road.
4WD LOW mode
engagement
With vehicle at a standstill, ignition
device in MAR position or with engine
on, move the gear lever to position
D (Drive), R (Reverse) or N (Neutral) and
press the 4WD LOW button.
On some versions, with mode
engaged, the display shows "4WD
LOW". The LED on the Selec-
Terrain™ device may flash until the
end of the engagement.
4WD LOW mode release
The release can occur at any speed
ranging from 0 to 120 km/h.
On some versions, "4WD LOW" on the
display switches off at the end of the
94 J0A0156C
release procedure.
IMPORTANT On some versions, In this case, the LED on the 4WD LOW
pressing the button 4WD LOW button is off.
it automatically activates the 4WD
LOCK function as well. If the 4WD LOW
button is pressed again, the 4WD WARNING
LOCK function will be activated. If,
however, the 4WD LOCK button is 40) The correct operation of the 4WD
pressed again, both functions will be function depends on the tyres: all of them
deactivated. must have the same size, the same type
and the same circumference. The use
IMPORTANT The 4WD LOW function is of tyres of the wrong size could interfere
recommended for irregular and slippery with gear changes and damage
transmission components.
terrain only.
110
SELEC-TERRAIN ❒ AUTO (Automatic): the 4WD mode When the engine is started, the AUTO
with continuous and automatic mode is automatically selected (LED on
DRIVING MODE
SELECTION operation can be used while driving on close to the AUTO wording).
road and off-road. This mode reduces Turning the knob A fig. 95 the LED
Turn knob A fig. 95 to select the wished fuel consumption, because the close to the AUTO wording comes on
mode. propeller shaft can be disconnected, solid. The other LEDs switch on
whenever required. sequentially, depending on the
❒ SNOW : this mode can achieve more positions set on the knob, so that the
stability on slippery or snow-covered driver can understand which is the new
grounds. To be used for driving on-road required mode.
and off-road in the case of grounds Once the required mode is set (LED
with poor grip, such as roads covered close to the wording switched on), just
by snow. keep the knob in that position so that
❒ SAND : off-road driving mode to be the Selec-Terrain™ system actuates
used on grounds with poor grip, such to engage the wished mode.
as muddy surfaces. The transmission is
set to offer a maximum traction.
❒ MUD : off-road driving mode for
surfaces with poor grip, such as
mud-covered grounds or wet grass.
❒ ROCK (where provided, for Trailhawk
versions only): this mode is only
available if the 4WD LOW mode is
activated. The device sets the vehicle to
maximise traction and give the highest
95 J0A0153C steering capacity on off-road surfaces
featuring a high grip. This mode offers
IMPORTANT Changing mode is not the best performance when driving
possible when the vehicle speed is over "off-road". This mode must be used to
120 km/h. pass over obstacles at slow speed,
such as large rocks, deep cracks, etc.
111
PARKSENSE ACTIVATION/ When the system is disengaged, the

SYSTEM DEACTIVATION LED on the button is off. Instead, if the
If the system has been correctly turned system is disengaged, the LED is on
on, it will activate automatically when constantly. The LED lights up also in the
SENSORS the reverse is engaged. case of a fault to the ParkSense® sys-
Instead, the system automatically tem.
126) 42) 43)
deactivates bringing the gear lever to a If the button is pressed with the system
The parking sensors, located in the rear
position different from reverse. faulty, the LED flashes for about 5
bumper fig. 96, are used to detect the
seconds, then it stays on constantly.
presence of any obstacles near the rear ENGAGEMENT/
part of the vehicle. DISENGAGEMENT IMPORTANT After the ParkSense®
To disengage the system press button has been disengaged, it will stay in this
fig. 97. condition until the following engage-
When the system passes from engaged ment, even if the ignition device passes
from MAR to STOP and then again to
to disengaged and viceversa, it is
MAR.
always accompanied by a dedicated
message shown on the instrument OPERATION WITH
panel display. TRAILER
The operation of the sensors is
automatically deactivated when the
trailer's electric plug is inserted in the
96 J0A0166C
vehicle's tow hook socket.
The sensors warn the driver about the
presence of obstacles with an
intermittent acoustic signal and, where
provided, also with visual indications
on the instrument panel display.
97 J0A0227C
112
The sensors are automatically ❒ the signals sent by the sensor can
reactivated when the trailer's cable plug also be altered by the presence of WARNING
is removed. Before using the Park- ultrasonic systems (e.g. pneumatic
Sense® system, it is recommended to brake systems of trucks or pneumatic
remove the tow hook ball assembly and 126) Parking and other potentially
drills) near the vehicle;
the relevant attachment from the vehi- dangerous manoeuvres are, however,
❒ Parking assistance system always the driver’s responsibility. When
cle when the latter is not used for tow-
performance can also be influenced by performing these operations, always make
ing operations. Failure to comply with sure that there are no other people
this prescription may cause personal the position of the sensors, for example
(especially children) or animals on the route
injuries or damages to vehicles or due to a change in the ride setting you want to drive into. The parking
obstacles since, when the continuous (caused by wear to the shock sensors are an aid for the driver, but the
acoustic signal is emitted, the tow hook absorbers, suspension), or by changing driver must never allow their attention
ball is already in a position that is much tyres, overloading the vehicle or to lapse during potentially dangerous
closer to the obstacle than the rear manoeuvres, even those executed at low
carrying out specific tuning operations
bumper. speeds.
that require the vehicle to be lowered.
In addition, the sensors may detect the
❒ the presence of a tow hook without
tow hook ball assembly and the WARNING
trailer, which may interfere with the
relevant attachment (depending on its
correct operation of the parking
size and shape), providing a false
sensors. 42) The sensors must be clean of mud,
indication of the presence of an
❒ the presence of adhesives on the dirt, snow or ice in order for the system to
obstacle in the area behind the vehicle. operate correctly. Be careful not to scratch
sensors. Thus take care not to place or damage the sensors while cleaning
GENERAL WARNINGS adhesives on the sensors. them. Avoid using dry, rough or hard
Some conditions may influence the cloths. The sensors should be washed
performance of the parking system: using clean water with the addition of car
shampoo if necessary. When using special
❒ reduced sensor sensitivity and a washing equipment such as high pressure
reduction in the parking assistance jets or steam cleaning, clean the sensors
system performance could be due to very quickly keeping the jet more than
the presence of: ice, snow, mud, thick 10 cm away.
paint, on the surface of the sensor; 43) Only have interventions on the bumper
in the area of the sensors carried out by
❒ the sensor may detect a non-existent a Jeep Dealership. Interventions on the
obstacle ("echo interference") due to bumper that are not carried out properly
mechanical interference, for example may compromise the operation of the
when washing the vehicle, in rain parking sensors.
(strong wind), hail;
113
LANESENSE IMPORTANT The system monitors the

SYSTEM (lane presence of the driver's hands on
crossing warning) the steering wheel. If they are
not detected, the system emits an
acoustic signal and deactivates until it is
DESCRIPTION reactivated by pressing the dedicated
button.
44) 45) 46) 47) 48) 49)
When one limit of the lane is detected
The LaneSense system makes use of a and the vehicle crosses it (direction
camera located on the windscreen to indicator off), warning light (or the
detect the lane limits and calculate 98 J0A0052C
icon on the reconfigurable multifunction
the position of the vehicle within such display) will be displayed on the ❒ vehicle speed ranges within 60 km/h
limits, in order to make sure that it instrument panel to urge the driver to and 180 km/h (or equivalent values in
remains inside the lane. bring the vehicle back into the lane. miles);
When both limits of the lane are In this case, the tactile warning (torque ❒ the lane limit lines are perfectly visible
detected and the vehicle crosses one of on the steering wheel) is not provided. on both sides;
them without the awareness of the
driver (direction indicator off), the SYSTEM ACTIVATION/ ❒ there are suitable visibility conditions;
DEACTIVATION ❒ the road is straight or with wide
system provides a tactile warning by
applying torque to the steering wheel, When the engine is started the system radius bends;
signalling the driver that he must take is activated (LED on button fig. 98 ❒ a suitable distance is kept from the
an action to remain into the lane. off). Each time the engine is started, the vehicle in front;
If the vehicle continues going beyond system keeps the activation status ❒ the direction indicator (for leaving the
the line of the lane without any there was when it was previously lane) is not active;
intervention from the driver, the switched off.
❒ the lane limit lines are perfectly visible
warning light (or the corresponding Activation conditions on both sides (for activation of the
graphic icon on the reconfigurable tactile warning only).
multifunction display) will be displayed Once switched on, the system
becomes active only if the following NOTE The system does not apply
on the instrument panel to urge the torque to the steering wheel every time
driver to bring the vehicle back into the conditions are met:
a safety system is activated (brakes,
limits of the lane. ❒ the driver always keeps at least one
ABS, ASR system, ESC system,
hand on the steering wheel;
Forward Collision Warning Plus system,
etc.).
114
48) Do not tamper nor operate on the REAR CAMERA
camera. Do not close the openings in the (PARKVIEW® REAR
WARNING aesthetic cover located under the interior
rear view mirror. In the event of a failure BACKUP CAMERA)
of the camera, contact a Jeep Dealership.
44) The camera may have limited or absent
operation due to weather conditions such 49) Do not cover the operating range of the
as: heavy rain, hail, thick fog, heavy snow, camera with stickers or other objects. DESCRIPTION
formation of ice layers on the windscreen. Also pay attention to other objects on the
bonnet (e.g. a layer of snow) and make 127) 50)
45) Camera operation may also be The camera is located on the tailgate
compromised by the presence of dust, sure they do not interfere with the camera.
fig. 99.
condensation, dirt or ice on the
windscreen, by traffic conditions (e.g.
vehicles that are driving not aligned with
yours, vehicle driving in a transverse or
opposite way on the same lane, bend with
a small radius of curvature), by road
surface conditions and by driving
conditions (e.g. off-road driving). Make sure
the windscreen is always clean. Use
specific detergents and clean cloths to
avoid scratching the windscreen. The
camera operation may also be limited or
absent in some driving, traffic and road
surface conditions. 99 J0A0102C
46) Projecting loads on the roof of the Every time reverse is engaged, the
vehicle may interfere with the correct
display fig. 100 of the Uconnect™
operation of the camera. Before starting
make sure the load is correctly positioned, system shows the area around the
in order not to cover the camera operating vehicle, as seen by the rear camera.
range.
SYMBOLS AND
47) If the windscreen must be replaced MESSAGES ON THE
due to scratches, chipping or breakage, DISPLAY
contact exclusively a Jeep Dealership. Do
not replace the windscreen on your own, The active line grid is positioned on the
risk of malfunction! It is advisable to replace image to illustrate the width of the
the windscreen if it is damaged in the area vehicle and the expected reversing path
of the camera.
in accordance with the steering wheel
position.
115
IMPORTANT When parking, take the

utmost care over obstacles that may be WARNING
above or under the camera range.
50) It is vital, for correct operation, that the
camera is always kept clean and free
WARNING from mud, dirt, snow or ice. Be careful not
to scratch or damage the camera while
cleaning it. Avoid using dry, rough or hard
127) Parking and other potentially cloths. The camera must be washed
dangerous manoeuvres are, however, using clean water, with the addition of car
always the driver’s responsibility. While shampoo if necessary. In washing stations
carrying out these manoeuvres, always which use steam or high-pressure jets,
make sure that no people (especially clean the camera quickly, keeping the
children) or animals are in the area nozzle more than 10 cm away from the
concerned. The camera is an aid for the sensors. Do not apply stickers to the
driver, but the driver must never allow camera.
his/her attention to lapse during potentially
dangerous manoeuvres, even those
executed at low speeds. Always keep a
slow speed, so as to promptly brake in the
case of obstacles.
100 J0A0103C
A superimposed central broken line

indicates the centre of the vehicle
to facilitate parking manoeuvres or tow
hook alignment.
The various coloured areas indicate the
distance from the rear of the vehicle.
Area (reference Distance from the

fig. 100) rear of the vehicle
Red (A) 0–30 cm
Yellow (B) 30–100 cm
Green (C) 1 m or more
116
TOWING TRAILERS IMPORTANT Never unlock in the case
of trailer attached to the vehicle or
TOW HOOK SETUP
with rack fitted.
128) 129) IMPORTANT When driving without
Instructions for using the trailer (or without rack), the ball head
removable ball head tow tow bar must be removed and the
bar closing plug must always be inserted in
IMPORTANT Before setting off, check the housing pipe. This applies
the correct locking of the removable particularly if, due to the bar, the
ball head tow bar, as follows: visibility of the number plate or of the
❒ the green mark of the knob must lighting system is reduced.
coincide with the green mark on the
tow bar;
❒ the knob is in the stop position on
the tow bar (without slot);
❒ locked lock and key removed. The
knob cannot be removed;
❒ ball head bar firmly secured to the
housing pipe. Check by shaking with a
hand.
The fitting procedure must be repeated
if any of the requirements are not met.
If even only one of the requirements
is not met the tow hook must not be
used, since there is risk of causing
accidents. Contact a Jeep Dealership.
The ball head tow bar can be
fitted/removed manually, without
requiring specific equipment.
IMPORTANT Never use vehicles or
work tools: the mechanism may be
damaged.
117
REMOVABLE BALL HEAD TOW BAR
101 J0A0423C
118
Key If the locking mechanism of the tow bar Close the lock and always remove the
1 – Housing pipe is disengaged before the installation, key. The key cannot be removed when
2 – Ball head tow bar or at any other time, and is in the the lock is released. Then fit the
3 – Locking balls locked position, it must be pre-loaded. protection cap on the lock.
4 – Release ball The locked position can be identified
Removing the tow bar
5 – Release lever by the green mark of the knob
6 – Knob coinciding with the green mark of the Proceed as follows:
7 – Cap tow bar and by the knob in the stop ❒ remove the protection cap from the
8 – Key position on the tow bar, namely without lock and press it on the key grip. Open
9 – Red marking (knob) slot (see figure). the lock with the key;
10 – Green marking (knob) The locking mechanism is pre-loaded ❒ grip the tow bar firmly, remove the
11 – Green marking (tow bar) as follows: knob following the direction of arrow A
12 – Symbol (control release) ❒ with key inserted and lock open, fig. 101, then rotate in the direction
13 – Closing cap extract the knob following the direction of arrow B until it stops, in order to
14 – Engagement pin of arrow A fig. 101; release it in unlocked position. Then
15 – Absence of slots between 2 and 6 ❒ then follow the direction of arrow B, remove the tow bar from the housing
16 – Slot of 5 mm approx. until it stops. pipe. The knob can then be released (it
A: locked position (driving) The release ball is pre-loaded and the will automatically stop in released
B: released position (removed) locking mechanism remains in the position);
Installing the ball head tow pre-loading position even when the ❒ arrange the tow bar in the luggage
bar knob is released. compartment so that it cannot be
Remove the plug from the mounting The release lever is engaged and the dirtied and/or damaged by other
pipe. locking mechanism remains in the transported objects;
The ball head tow bar is usually in the pre-loading position even when the ❒ finally, insert the dedicated plug in the
released position when taken out from knob is released. mounting pipe.
the luggage compartment. This can The tow bar must be inserted in the
housing pipe with the coupling pin for Important
be observed by the knob spaced from
the tow bar, corresponding to a slot the installation. Insert from the bottom Apply the plate in a highly visible point
of approximately 5 mm (see fig. 101) and push upwards: the mechanism of the vehicle, near the mounting pipe
and by the red mark on the knob locks automatically. or inside the luggage compartment.
directed to the green mark on the tow IMPORTANT To prevent injury to limbs,
bar. The tow bar can be installed only keep hands away from the knob when
when in these conditions. locking.
119
To ensure correct operation of the REFUELLING THE

system, periodically remove all deposits WARNING VEHICLE
of dirt which may have accumulated
on the ball head bar and from the
128) The ABS with which the vehicle is Always stop the engine before
mounting pipe. The lock must only be
equipped will not control the braking refuelling.
treated with graphite. system of the trailer. Particular caution is 130) 131) 132)
Periodically lubricate the joints, the therefore required on slippery surfaces.
sliding surfaces and the balls with 129) Never modify the braking system of PETROL ENGINES
grease without resin or oil. Lubrication the vehicle to control the trailer brake. The Only use unleaded petrol with a number
is also a further corrosion protection. trailer braking system must be fully
of octanes (R.O.N.) not lower than 95
independent of the vehicle’s hydraulic
if the vehicle is washed with high- (EN228 specification).
system.
pressure jets, the ball head bar must be
DIESEL ENGINES
removed and the dedicated plug fitted.
The ball head bar must never be 51)
treated with high-pressure jets. Only use Diesel for motor vehicles
Two keys are supplied together with the (EN590 specification).
removable ball tow bar. Note down When using or parking the vehicle for a
the four-digit key number and keep it in long time in the mountains or cold
a safe place. This number is to be areas, it is advisable to refuel using
used for ordering any duplicate keys locally available diesel. In this case, it is
that may be required. also advisable to keep the tank over
50% full.
IMPORTANT To install a tow hook REFUELLING
contact a Jeep Dealership. PROCEDURE
The fuel flap is unlocked when the
central door locking system is released,
while it is automatically locked when
the central locking system is applied.
Opening the flap
To refuel proceed as follows:
❒ open flap A fig. 102, from the point
shown by the arrow;
120
❒ introduce the dispenser in the filler Emergency fuel flap
and refuel; opening
Proceed as follows:
❒ working from inside the luggage
compartment, rotate hook A fig. 103
anticlockwise, and then slide it towards
the inside of the luggage compartment:
❒ pull the cord to unlock the fuel flap;
104 J0A0200C
❒ insert the adapter in the filler;

❒ after refuelling, remove the adapter
and close the flap;
❒ finally refit the adapter in the luggage
compartment.
103 J0A0400C WARNING

❒ open the fuel flap by pressing on
it (see the previous instructions); 130) Do not apply any object/plug to the
end of the filler which is not provided
102 J0A0182C ❒ correctly reposition the cord and the for the vehicle. Using non-approved
hook in their housing. objects/plugs may cause pressure
❒ then remove the dispenser from the increase in the tank, leading to dangerous
filler and close flap A. Emergency refuelling conditions.
The refuelling procedure described Proceed as follows: 131) Do not get close to the filler of the
previously is illustrated on label B fig. tank with naked flames or lit cigarettes: risk
❒ open the luggage compartment and of fire. Do not get too close to the filler
102, which is applied inside the fuel take adapter A fig. 104, located in with your face, in order not to inhale
flap. The label also indicates the fuel the tool box or in the TireKit container harmful vapours.
type (UNLEADED FUEL=petrol, (according to the versions); 132) Do not use a mobile phone near the
DIESEL=diesel fuel). fuel pump: risk of fire.
❒ open flap A fig. 102, following the
procedure described previously;
121
WARNING
51) The vehicle must only be filled with

diesel fuel for motor vehicles, in
compliance with European Standard EN
590. The use of other products or mixtures
may damage the engine beyond repair
and consequently invalidate the warranty,
due to the damage caused. If you
accidentally refuel with another type of fuel,
do not start the engine, and drain the
tank. If the engine has run, even for a very
short time, you will need to have the entire
fuel supply system emptied in addition to
the tank.
122
IN AN EMERGENCY
A punctured tyre or a burnt-out bulb? HAZARD WARNING LIGHTS...........124

At times, a problem may interfere REPLACING A BULB ......................124
with our journey. REPLACING FUSES........................130
The pages on emergencies can help CHANGING A WHEEL ...................135
you to deal with critical situations
independently and with calm. TIREKIT...........................................139
In an emergency we recommend that JUMP STARTING ............................141
you call the freephone number found in FUEL CUT-OFF SYSTEM ................143
the Warranty Booklet.
AUTOMATIC TRANSMISSION
It is also possible to call the national or GEAR LEVER UNLOCKING.............143
international universal freephone
number to search for the nearest TOWING THE VEHICLE ..................145
Dealership. BROKEN-DOWN VEHICLE
TOWING .........................................146
123
HAZARD WARNING REPLACING A BULB
IN AN EMERGENCY
IMPORTANT When the weather is cold
LIGHTS or damp or after heavy rain or washing,
the surface of headlights or rear lights
CONTROL
133) 134) 135) 52) may steam up and/or form drops of
Press button fig. 105 to switch the condensation on the inside. This is
lights on/off. GENERAL a natural phenomenon due to the
When the hazard warning lights are on, INSTRUCTIONS difference in temperature and humidity
the and warning lights flash. ❒ Before replacing a bulb check the between the inside and the outside
contacts for oxidation; of the glass which does not indicate a
❒ replace blown bulbs with others of fault and does not compromise the
the same type and power; normal operation of lighting devices.
❒ after replacing a headlight bulb, The mist disappears quickly when the
always check its alignment; lights are turned on, starting from
the centre of the diffuser, extending
❒ when a light is not working, check
progressively towards the edges.
that the corresponding fuse is intact
before replacing the bulb. For the
location of fuses, refer to the paragraph
105 J0A0050C “If a fuse blows” in this chapter.
IMPORTANT The use of hazard warning

lights is governed by the highway
code of the country you are driving in:
comply with legal requirements.
Emergency braking
In the event of an emergency braking
the hazard warning lights switch on
automatically as well as warning lights
and in the instrument panel.
The lights switch off automatically when
emergency braking ceases.
124
Bulbs Type Power
Front side lights/Daytime running lights (DRL) P21/5W 21/5 W
Rear side lights P21W 21 W
Main beam/dipped beam headlights (halogen) H4 60/55 W
Main beam/dipped beam headlights (Xenon gas discharge) D5S 25 W
Front direction indicators PY21W 21 W
Rear direction indicators W16W 16 W
Side direction indicators (front and on door mirror) WY5W 5W
3rd brake light LED –
Number plate W5W 5W
Fog lights H11 55 W
Rear fog light W16W 16 W
Reverse light W16W 16 W
Front courtesy lights C5W 5W
Front roof lights (sun visors) C5W 5W
Rear roof light (versions without sun roof) C5W 5W
Rear roof lights (versions with sun roof) C5W 5W
Luggage compartment roof lights W5W 5W
Glove compartment light W5W 4W
125
CHANGING AN EXTERIOR ❒ remove, outwards, the bulb and bulb Front lower light cluster
IN AN EMERGENCY
LIGHT holder assembly C fig. 108, Side light/daytime running lights (DRLs)
Front upper light cluster disconnecting it from connector D; and front direction indicators
(main beam/dipped halogen To replace the bulbs proceed as
headlights)
follows:
To replace the bulb, proceed as follows: ❒ steer the wheels completely;
❒ working from inside the engine ❒ using the screwdriver, undo screws A
compartment, remove cover A fig. 106, fig. 109 and remove flap B;
using the dedicated tab;
108 J0A0414C
❒ install the new bulb and bulb holder

assembly, ensuring that it is locked
correctly;
❒ then insert the bulb and bulb holder
unit in its housing and turn it clockwise, 109 J0A0211C
106 J0A0260C
making sure that it is locked correctly.
❒ remove electrical connectors C fig.
❒ turn the bulb and bulb holder 110;
assembly B fig. 107 anticlockwise and IMPORTANT Only replace the bulb
then remove it outwards; when the engine is off. Also ensure that
the engine is cold, to prevent the risk
of burns.
Front upper light cluster
(main beam/dipped Xenon
gas discharge headlights)
For replacing these bulbs, contact
a Jeep Dealership.
110 J0A0306C
107 J0A0261C
126
❒ turn anticlockwise (on the left device) ❒ insert the new bulb, by pressing it fig.
or clockwise (on the right device) and 112 and turning it clockwise, making
remove the bulb and bulb holder sure that it locks correctly;
assemblies fig. 111: D = side ❒ then insert the bulb and bulb holder
lights/daytime running lights (DRLs), E = units in their respective housings and
direction indicators; turn them anticlockwise (right side) and
clockwise (left side), ensuring that
they are locked correctly;
❒ reconnect the electrical connectors;
❒ finally, refit flap B fig. 109, completely 114 J0A0301C
tightening fixing screws A. ❒ turn the bulb and bulb holder

Fog lights assembly E fig. 114 anticlockwise and
then replace the bulb;
To replace the bulbs proceed as
follows: ❒ fit the new bulb and bulb holder
assembly, ensuring that it locks
111 J0A0263C ❒ steer the wheels completely;
correctly;
❒ using the screwdriver, undo screws A
❒ replace the blown bulb: to remove ❒ reconnect the electrical connector;
fig. 113 and remove flap B;
the bulb, press on it gently (1 fig. 112) ❒ finally, refit flap B fig. 113, completely
and at the same time turn it tightening fixing screws A.
anticlockwise (2);
Side direction indicators
Side direction indicators on door
mirrors
(where provided)
For bulb replacement, contact a Jeep
Dealership.
Rear upper light cluster
113 J0A0211C
This contains the bulbs for the side
❒ using tab C fig. 114, remove lights, brake lights and direction
112 J0A0264C electrical connector D; indicators.
127
IN AN EMERGENCY
follows:
❒ open the tailgate;
❒ working at the point indicated by the
arrow, remove flap A fig. 115;
117 J0A0316C 119 J0A0270C
❒ screw the rear light cluster fixing

device into position completely and
reconnect the electrical connector;
❒ refit flap A fig. 115, ensuring that it
115 J0A0113C locks correctly;
❒ unscrew fixing device B fig. 116; ❒ finally, close the tailgate.
❒ disconnect the electrical connector, Rear lower light cluster
working on device C; These contain the rear fog light bulbs
118 J0A0268C (left side) and reversing light bulbs (right
side).
❒ replace the bulb concerned (fig. 119:
E/G = brake lights, F = direction
follows:
indicators) (E and G bulbs always
switch on together); ❒ using the screwdriver, undo screws A
fig. 120 and B and remove flap C;
❒ fit the new bulb, making sure it is
correctly locked; ❒ upper screw A is easy to access,
whereas for lower screw B it is
❒ refit the bulb holder unit correctly on
necessary to incline the blade of the
the rear light cluster, completely
116 J0A0269C screwdriver appropriately as illustrated
tightening the four fixing screws;
❒ remove the rear light cluster, in fig. 121;
❒ reposition the rear light cluster on the
outwards as indicated in fig. 117; vehicle;
❒ undo the four fixing screws D fig. 118
and remove the bulb holder unit;
128
❒ turn bulb holder D fig. 122
anticlockwise and replace the bulb
concerned;
120 J0A0212C
122 J0A0302C
❒ fit the new bulb, making sure it is

correctly locked;
❒ refit the bulb holder in its housing and
turn it clockwise, making sure that it
locks correctly;
❒ refit flap C correctly, completely 123 J0A0444C
tightening the screws.

❒ insert the new bulbs, making sure
3rd brake light that they are locked correctly in the
The 3rd brake lights are LED-based. To bulb holders;
replace them, contact a Jeep ❒ finally, refit the lenses.
Dealership.
Number plate lights
follows:
121 J0A0213C
❒ remove the lenses A fig. 123;
❒ rotate the bulb holder anticlockwise
and remove the bulbs;
129
REPLACING FUSES ENGINE COMPARTMENT
IN AN EMERGENCY
FUSE BOX
WARNING
The fuse box is located by the side of
INTRODUCTION the battery fig. 125.
133) Before replacing the bulb, wait for the
exhaust ducts to cool down: RISK OF 136) 137) 138) 139) 140)
BURNS!
53) 54)
134) Changes or repairs to the electrical
system carried out incorrectly and without Fuse extracting pliers
due consideration for the technical To replace a fuse, use the pliers hooked
specifications of the system may lead to to the engine compartment fuse box
malfunctioning and generate a fire hazard.
cover (see fig. 124).
135) Halogen bulbs contain pressurised
gas. If they break, glass fragments could fly
everywhere.
WARNING
52) Halogen bulbs must be handled by

holding the metallic part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
124 J0A0250C
of the bulb. In the case of accidental
contact, rub the lamp with a cloth and FUSE LOCATION
spirit and leave to dry.
Fuses are grouped together in four fuse
125 J0A0117C
boxes located in the engine
compartment, under the dashboard Releasing fixing screw and
and inside the luggage compartment. removing fuse box cover
Proceed as follows:
❒ fully tighten screw A fig. 126, using
the dedicated screwdriver provided;
130
❒ slowly rotate the screw anticlockwise, ❒ fully tighten screw A fig. 126, using
until resistance is encountered (do not the dedicated screwdriver provided;
overtighten); ❒ slowly rotate the screw clockwise,
❒ slowly release the screw; until resistance is encountered (do not
❒ opening is indicated by the entire overtighten);
screw head coming out of its housing; ❒ slowly release the screw;
❒ remove cover B fig. 126, sliding it ❒ closure is indicated by the securing
completely upwards, as indicated in the of the entire screw head in its housing.
figure. DASHBOARD FUSE BOX
The fuse box fig. 127 is located near
the left side of the steering column and
the fuses can be accessed easily from
the lower part of the dashboard.
For fuse replacement, contact a Jeep
Dealership.
LUGGAGE
COMPARTMENT FUSE
BOXES
126 J0A0116C To access the fuses operate in the point 127 J0A0114C
shown by the arrow and remove flap A
The number identifying the electrical
fig. 128.
component corresponding to each fuse
is shown on the cover. After replacing
a fuse, make sure that you have closed
cover B correctly.
Fitting fuse box cover and
locking screw
Proceed as follows:
❒ fix cover B fig. 126 to the box
correctly, sliding it down completely
from the top;
128 J0A0113C
131
Depending on the equipment of the vehicle, fuse box A and/or fuse box B (see fig. 129) may be present.
IN AN EMERGENCY
A: fuse box no. 1
B: fuse box no. 2
129 J0A0210C
132
ENGINE COMPARTMENT FUSE BOX
fig. 125
DEVICES FUSE AMPERE

Horn F10 10
Luggage compartment power socket supply F18 20
Available F30 –
Heated door mirrors F88 7,5
Heated rear window F89 30
.
DASHBOARD FUSE BOX

fig. 127
DEVICES FUSE AMPERE
Front electric window (driver side) F33 25
Front electric window (passenger side) F34 25
Supply for Uconnect™ system, Climate Control system, Alarm, F36 20
Electric door mirror folding, EOBD system, USB port
Safe Lock device (Driver side door unlocking - where provided)/ F38 20
Door unlocking/Central locking/Electric tailgate unlocking
Windscreen/rear window washer pump F43 20
Rear left electric window F47 20
Rear right electric window F48 20
133
LUGGAGE COMPARTMENT FUSE BOXES
IN AN EMERGENCY
fig. 129
NOTE The configuration of the luggage compartment varies in accordance with the equipment on the vehicle.
Fuse box no. 1
DEVICES FUSE AMPERE
HI-FI system F2 20
Electric sun roof F3 20
Front seat electric lumbar adjustment (driver guide) F4 7,5
Electric front seat adjustment (driver side) F5 30
Electric front seat adjustment (driver side and passenger side) F6 7,5
Electric front seat lumbar adjustment (driver side and passenger F7 30
side)
Electrical front seat heating F8 20
The fuse box also has a 20 A protective fuse for the sun roof curtain.
Fuse box no. 2
DEVICES FUSE AMPERE
External trailer lighting control unit F1 10
External lighting control unit (left side) F5 15
External lighting control unit (right side) F6 15
134
CHANGING A WHEEL
WARNING
141) 142) 143) 144) 145) 146) 147) 148)

136) If the fuse blows again contact a Jeep
Dealership. CHANGING PROCEDURE
137) Never replace a fuse with another with Proceed as follows:
a higher amp rating; DANGER OF FIRE. ❒ stop the vehicle in a position that is
138) If a general protection fuse (MAXI- not dangerous for oncoming traffic
FUSE, MEGA-FUSE, MIDI-FUSE) blows,
contact a Jeep Dealership.
where you can change the wheel safely,
as far as possible from the side of the 130 J0A0223C
139) Before replacing a fuse, make sure
that the ignition device has been taken to road. The ground should be flat if
STOP, that the ignition key, if mechanical, possible, and sufficiently firm;
has been removed and that all the other ❒ engage the hazard warning lights and
services are switched off and/or
deactivated.
the electric parking brake;
140) Contact a Jeep Dealership if a safety ❒ engage first gear or reverse or, for
system (airbags, brakes), power unit versions with automatic transmission,
system (engine, gearbox) or steering move the lever to position P (Park);
system general protection fuse blows.
❒ stop the engine and put on the
reflective safety jacket (for your own
safety and in compliance with national 131 J0A0086C
WARNING
laws) before getting out of the vehicle.
❒ pull tab C fig. 132 and lift the carpet;
The engine must stay off while the
53) Never replace a fuse with metal wires
or anything else. vehicle is raised from the ground.
54) If it is necessary to wash the engine The spare wheel or, depending on the
compartment, take care not to directly hit version, space-saver wheel is located
the junction unit and the window wiper under the luggage compartment carpet
motors with the water jet. fig. 130.
To access the wheel or space-saver
wheel, proceed as follows:
❒ open the tailgate, grip handle A fig.
131 and raise load platform B, holding
it with one hand; 132 J0A0090C
135
❒ remove the fixing device for the jack ❒ I: the Allen key for emergency sun ❒ no tool other than its cranking device
IN AN EMERGENCY
and the spare wheel; roof operation (where provided). may be fitted on the jack.
❒ remove the wheel chock; Then proceed as follows:
❒ remove the jack unit and the key for A ❒ should it be necessary to stop the
C
removing the bolts from the spare vehicle on a road with a gradient,
wheel. Turn the screw of the jack to especially a very high one, or on an
loosen the key and separate it from the unstable surface, take chock A and fold
jack assembly; it out, as shown in the diagram in fig.
❒ take the spare wheel out of the 134;
B
luggage compartment.
D
Tool box (where provided)
E
On versions with spare wheel there
is also, inside the luggage compartment
(right side), a tool box secured to the I
F
luggage compartment carpet with
dedicated fastenings.
Inside the tool box are fig. 133: G
❒ A: the jack; H
134 J0A0157C
❒ B: the screwdriver;
❒ C: the emergency refuelling adaptor; ❒ alert any bystander that the vehicle is
about to be raised: all persons should
❒ D: the wheel locating pin (where 133 J0A0226C
be kept away from the vehicle and
provided, to use during the spare wheel
Important information about nobody must touch it until it has been
fitting operation);
the jack lowered. Nor should any occupant
❒ E: special anti-theft nut (where remain in the vehicle;
provided, to use during the wheel bolt Please note that:
❒ if the vehicle has alloy wheels, where
fitting/removal operation); ❒ the weight of the jack is 2.8 kg;
the hub cap covers the bolts, use the
❒ F: a chock for locking the wheels; ❒ the jack requires no adjustment; key with great care to remove the
❒ G: the tow hook; ❒ the jack cannot be repaired: in the hub cap before raising the vehicle;
❒ H: the key for removing/tightening the event of a fault it must be replaced by
wheel bolts and operating the jack; another original one;
136
❒ before raising the vehicle, loosen – ❒ tighten the bolts, alternating from one
without removing – the bolts on the bolt to the one opposite, according to
wheel with the flat tyre using key A fig. the numerical sequence illustrated in
135. With the wheel still resting on fig. 137. In the case of any doubts
the ground, a single anticlockwise regarding the bolt tightening torque,
rotation of the bolts will be enough; contact a Jeep Dealership;
❒ reposition the jack, the tools, the
chock and the flat tyre inside the
luggage compartment, ensuring that
136 J0A0422C they are locked correctly.
❒ remove the key from the jack and

insert the locating pin in the hub cap (in
the case of alloy wheels)to facilitate
fitting of the spare wheel;
❒ make sure the contact surfaces
135 J0A0249C
between spare wheel and hub
❒ position the jack under the vehicle, are clean so that the fixing bolts will not
near the wheel to be changed; become loose subsequently;
❒ fit key D fig. 136 on hexagon A of ❒ fit the spare wheel;
137 J0A0159C
jack B and turn it clockwise until the ❒ fit and do up the bolts, without
jack’s bracket is inserted firmly in the tightening them; IMPORTANT
under-door side member lifting area, ❒ if used, remove the alignment pin; ❒ Should it be absolutely necessary to
taking care to keep the staff aligned ❒ operate the jack and completely operate on the road surface or near
with the notch indicated by symbol lower the vehicle; it, pay the utmost attention to vehicles
on the under-door trim; ❒ take the spare wheel, jack and wheel in transit.
❒ lift the vehicle until the wheel is a few bolt removal key (see fig. 133); ❒ Pay particular attention when using
centimetres off the ground; ❒ if the vehicle has aluminium rims, the key to remove the bolts: it may have
❒ remove the bolts and the wheel (for where the hub cap covers the bolts, sharp edges.
versions with hub cap, remove it after use the key with great care to remove
loosening the 4 bolts that fix it and, the hub cap before raising the vehicle;
finally, undo the last bolt and remove
the wheel);
137
❒ Raising the vehicle any more than ❒ If the vehicle has a hub cap or wheel 144) The vehicle's driving characteristics
IN AN EMERGENCY
necessary may lower its stability: the cover, do not attempt to fit it on the will be modified with the space-saver wheel
fitted. Avoid violent acceleration and
jack may slip and injure those nearby. spare wheel. braking, abrupt steering and fast cornering.
Do not raise the vehicle any more ❒ To prevent injury to persons, the The overall duration of the space-saver
than required for the removal of the complete tightening of the bolts must wheel is of about 3000 km, after which the
wheel. only be carried out when all of the relevant tyre must be replaced with another
one of the same type. Never install a
❒ Tyres with unidirectional tread can be vehicle’s wheels are on the ground, to standard tyre on a rim that is designed for
recognised by arrows on the side of prevent the vehicle falling from the jack. use with a space-saver wheel. Have the
the tyre which indicate the direction of ❒ After having travelled for about wheel repaired and refitted as soon as
rotation. This must of necessity be possible. Using two or more space-saver
40 km, stop and check that the bolts wheels at the same time is forbidden.
complied with. Only in this way can the are tightened correctly. Do not grease the threads of the bolts
tyres maintain their characteristics in before fitting them: they might slip out
terms of grip, noise, resistance to wear when driving!
and drainage on wet surfaces. WARNING 145) The space-saver wheel (where
❒ If, after a puncture, it is necessary to provided) is specific to your vehicle: do not
use it on other models, or use the
fit such a tyre the wrong way round, 141) If left in the passenger compartment, space-saver wheel of other models on your
it will be necessary to continue driving the punctured wheel and jack constitute vehicle. The space-saver wheel must only
with great care, since the tyre’s a serious risk to the safety of occupants in be used in the event of emergency. It
performance is limited in these the event of accidents or sharp braking. must only be used for the distance
Therefore, always place both the jack and necessary to reach a service point and the
conditions. This precaution must be punctured wheel in the dedicated housing vehicle speed must not exceed 80 km/h.
borne in mind above all when the road in the luggage compartment. The space-saver wheel has an orange label
surface is wet. 142) It is extremely dangerous to attempt that summarises the main cautions for
❒ In order to benefit completely from to change a wheel on the side of the use and limitations. Never remove or cover
vehicle next to the driving lane: make sure the label. Never apply a hub cap on a
the unidirectional tread, it is advisable to space-saver wheel.
that the vehicle is at a sufficient distance
restore all wheels to the correct from the road, to avoid being run over.
direction of rotation as soon as 143) Indicate the presence of the stationary
possible. vehicle in accordance with current
❒ Make sure that the spare wheel is regulations: hazard warning lights, warning
fitted with the valve facing outwards. triangle, etc. Those on board should get
out of the vehicle, particularly if it is heavily
The wheel may be damaged if fitted laden, and wait for the wheel to be
incorrectly. changed away from the threat posed by
the traffic. On slopes or on unsurfaced
roads, chock the wheels with the chocks
provided.
138
146) The jack is a tool developed and TIREKIT ❒ a compressor D complete with
designed only for changing a wheel, if a pressure gauge and connectors;
tyre gets punctured or damaged, on the (where provided)
vehicle with which it is supplied or on other ❒ instruction leaflet for quick, correct
vehicles of the same model. It must not use of the TireKit;
be used, for example, to jack other vehicle DESCRIPTION
❒ a pair of gloves located in the side
models or objects. Never use the jack to The TireKit is located in the luggage
carry out maintenance or repairs under the compartment of the compressor;
vehicle. Never position yourself under a compartment inside a dedicated ❒ adaptors for inflating different
jacked vehicle. Should it be necessary to container. elements.
work under the vehicle, contact a Jeep The container is also equipped with a
Dealership. Incorrectly positioning the jack screwdriver, the tow hook and the IMPORTANT The sealing fluid is
may cause the vehicle to fall: use it only
in the positions indicated. Do not use the
refuelling adaptor. effective with external temperatures of
jack for loads higher than the one shown To access the TireKit, open the tailgate, between –20°C and +50°C. The sealing
on its label. remove the reconfigurable load platform fluid has an expiry date.
147) The space-saver wheel cannot be and lift the carpet.
INFLATION PROCEDURE
fitted with snow chains. If a front (drive) tyre 149) 151) 55) 3)
is punctured and chains are needed, use The TireKit also contains: 150) 152) 153) 154) 155) 156)
a standard wheel from the rear axle and Proceed as follows:
install the space-saver wheel on the rear
❒ bottle A fig. 138 containing sealant
axle. In this way, with two normal drive and fitted with: filling tube B and ❒ engage the electric parking brake,
wheels at the front axle, it is possible to use adhesive label C with the wording unscrew the tyre valve cap, take out
snow chains. “Max. 80 km/h” to be placed in a filler hose A fig. 139 and tighten ring nut
148) Incorrect hub cap assembly, if clearly visible position (e.g. on B on the tyre valve;
present, may cause it to come off when the the dashboard) after repairing the tyre;
vehicle is moving. Never tamper with the
inflation valve. Never introduce tools of any
kind between the rim and the tyre. Check
tyre and space-saver wheel pressures
regularly, complying with the values given in
the "Technical specifications" chapter.
139 J0A0107C
138 J0A0105C
139
❒ make sure that the switch for the ❒ if a pressure value of at least 1.8 bar 155) Do not operate the compressor for
IN AN EMERGENCY
compressor is in position 0 (off), start is detected, restore the correct longer than 20 minutes consecutively. Risk
of overheating. The TireKit is not suitable
the engine, insert the plug into the pressure (with engine running and for definitive repairs, so the repaired tyres
luggage compartment power socket or electric parking brake), resume driving may only be used temporarily.
on central tunnel and switch on the immediately and drive with great care to 156) The bottle contains ethylene glycol
compressor by bringing the switch to a Jeep Dealership. and latex: it may cause an allergic reaction.
position I (on); It is harmful if swallowed. It is irritant for
the eyes. It may cause sensitisation if
❒ inflate the tyre to the pressure inhaled or on contact. Avoid contact with
indicated in the “Wheels” paragraph WARNING eyes, skin and clothes. In the case of
(see “Technical data” chapter). In order contact, wash immediately with plenty of
to obtain a more precise reading, check water. In the event that it is swallowed, do
149) Punctures on the sides of the tyre
the pressure value on pressure gauge not induce vomiting. Rinse out your mouth,
may not be repaired. Do not use the TireKit
drink large quantities of water and seek
B with the compressor off; if the tyre is damaged due to travelling
immediate medical attention. Keep out of
when flat.
❒ if after five minutes it is still impossible the reach of children. The product must
150) Wear the protective gloves provided not be used by asthmatics. Do not inhale
to reach at least 1.8 bar, disengage
with the TireKit. the vapours during insertion and suction.
the compressor from the valve and Call a doctor immediately if allergic
151) Apply the adhesive label where it can
power socket, then move the vehicle be easily seen by the driver as a reminder reactions are noted. Store the bottle in its
forwards by approx. ten metres in order that the tyre has been treated with the proper compartment, away from sources
to distribute the sealing fluid inside the TireKit. Drive carefully, particularly on of heat. The sealant fluid has an expiry
tyre evenly, then repeat the inflation bends. Do not exceed 80 km/h. Do not date. Replace the bottle containing
accelerate or brake suddenly. out-of-date sealant fluid.
operation;
152) If the pressure has fallen below 1.8
❒ if after this operation you still cannot bar, do not drive any further: the TireKit
reach at least 1.8 bar after 5 minutes cannot guarantee proper hold because the WARNING
from switching on the compressor, tyre is too damaged. Contact a Jeep
do not resume driving but contact a Dealership.
Jeep Dealership; 153) You must always indicate that the tyre 55) In the event of a puncture caused by
was repaired using the TireKit. Give the foreign bodies, the kit may be used to
❒ after having driven for about 10 leaflet to the technicians who will be repair tyres showing damages on the tread
minutes, stop and re-check the tyre handling the tyre that was treated using the or shoulder up to max. 4 mm diameter.
pressure; remember to engage the TireKit.
electric parking brake; 154) Repair is not possible if the wheel rim
is damaged (groove is deformed, causing
air to escape). Do not remove foreign
bodies (screws or nails) from the tyre.
140
JUMP STARTING ❒ operate the parking brake, move the
WARNING automatic transmission lever to P
If the battery is flat, a jump starting can
(Park) or, for versions with manual
be performed using the battery and
gearbox, to neutral and bring the
3) Dispose of the bottle and the sealant the cables of another vehicle, or using a
ignition device to STOP;
properly. Dispose of the components booster battery.
in compliance with national and local ❒ switch off all the other electrical
regulations. IMPORTANT appliances in the vehicle;
When using booster battery is used, ❒ if another vehicle is ready for
comply with the utilisation and emergency starting, park the vehicle
precaution instructions specified by the within the reach of the cables to be
producer. used for starting, operate the parking
Do not use the booster battery or any brake and make sure that the ignition is
other source of external supply with deactivated.
a voltage above 12 V: the battery, the
starter, the alternator and the electrical IMPORTANT Avoid contact between
system of the vehicle could be the two vehicles since this could cause
damaged. a connection to earth and may result
Do not attempt jump starting if the in serious injury to any people nearby.
battery is wet. The battery could break PROCEDURE FOR JUMP
and explode! STARTING
PREPARATION TO JUMP IMPORTANT If the procedure below is
STARTING carried out incorrectly can cause severe
157) 158) 159) 56) injuries to people or damage the
recharging system of one or both
IMPORTANT The positive terminal (+) of vehicles. Carefully follow the
the battery is shielded by a protective instructions given below.
cover. Lift the cover to access the
positive terminal. Cable connection
Proceed as follows: Proceed as follows to carry out a jump
starting:
❒ connect one end of the cable used
for positive (+) to the positive terminal
(+) of the vehicle with flat battery;
141
❒ connect the other end of the cable If it is often necessary to perform an
IN AN EMERGENCY
used for positive (+) to the positive emergency starting, have the vehicle WARNING
terminal (+) of the auxiliary battery; battery and the recharging system
❒ connect one end of the cable used checked by a Jeep Dealership.
56) Do not connect the cable to the
for negative (–) to the negative terminal negative terminal (–) of the flat battery. The
IMPORTANT Any accessories (e.g.
(–) of the auxiliary battery; following spark could lead to battery
mobile phones, etc.) connected to the explosion and cause serious harm. Only
❒ Connect the other end of the cable vehicle current sockets, draw current use the specific earth point; do not use any
used for negative (–) to an engine earth even if they are not used. These other exposed metallic part.
(the visible metal part of the vehicle devices, if left connected too much time
engine with flat battery) away from the with engine off, may cause the battery
battery and the fuel injection system; to drain with following reduction of
❒ start the vehicle engine with the its life and/or failure to start the engine.
auxiliary battery, let it run for a
few minutes at idling. Start the engine
of the vehicle with flat battery. WARNING
Cable disconnection.
Once the engine has been started, 157) Do not get too close to the radiator
cooling fan: the electric fan may start;
remove the cables proceeding as danger of injury. Pay attention to scarves,
follows: ties and other loose clothing which might
❒ disconnect the end of the cable used be pulled by moving parts.
for negative (–) from the engine earth 158) Remove any metal objects (e.g. rings,
of the vehicle with flat battery; watches, bracelets), that might cause an
accidental electrical contact and cause
❒ disconnect the other end of the cable serious injury.
used for negative (–) to the negative 159) Batteries contain acid which may burn
terminal (–) of the auxiliary battery; skin and eyes. Batteries produce
❒ disconnect the end of the cable used hydrogen, which is easily flammable and
explosive. Thus keep away flames or
for positive (+) to the positive terminal devices which may cause sparks.
(+) of the auxiliary battery;
❒ disconnect one end of the cable
used for positive (+) from the positive
terminal (+) of the vehicle with flat
battery;
142
FUEL CUT-OFF ❒ move the ignition device to MAR; AUTOMATIC
SYSTEM ❒ turn on the direction indicators on the TRANSMISSION
This intervenes in the case of an impact right, then on the left, then again on GEAR LEVER
causing: the right and again on the left; UNLOCKING
❒ the interruption of the fuel supply with ❒ now deactivate the direction In the event of a fault, to move the gear
the engine consequently cutting out; indicators on the left; lever from P (Park), proceed as follows:
❒ the automatic unlocking of the doors; ❒ bring the ignition device to STOP; ❒ stop the engine and engage the
❒ turning on of the lights inside the ❒ move the ignition device to MAR. electric parking brake;
vehicle; 160) ❒ working carefully in the point
❒ deactivation of climate control system indicated by the arrow, remove the
ventilation; WARNING transmission trim A fig. 140 (complete
with gaiter) lifting it upwards;
❒ switching on of the hazard warning
lights (to deactivate the lights press the 160) If, after an impact, you smell fuel or
button on the dashboard). notice leaks from the fuel system, do
not reactivate the system to avoid the risk
On some versions, the intervention of
of fire.
the system is indicated by a message
shown on the display. In the same way,
a dedicated message on the display
warns the driver if system operation is
compromised.
IMPORTANT Carefully check the vehicle

140 J0A0342C
for fuel leaks, for instance in the engine
compartment, under the vehicle or ❒ fully depress the brake pedal and
near the tank area. After a collision, hold it down;
bring the ignition device to STOP to ❒ insert the screwdriver supplied
prevent the battery from running down. perpendicularly in hole B fig. 141 and
To restore correct operation of the adjust the release lever;
vehicle, carry out the following
❒ place the gear lever in N (Neutral)
procedure (this procedure must be
position;
started and completed within less than
one minute): ❒ refit the gear lever gaiter and panel
correctly;
❒ start the engine.
143
IN AN EMERGENCY
141 J0A0344C 142 J0A0393C
EMERGENCY REMOVAL
OF THE IGNITION KEY
57)
The ignition key (versions with

mechanical key) can be removed only if
the gear lever is in position P (Park).
If the vehicle battery is flat and the key
is engaged, the latter is locked in
position.
143 J0A0247C 144 J0A0251C
To remove the key manually, proceed
as follows: ❒ pull tab D fig. 144 downwards using
❒ stop the vehicle in safety conditions, one hand and with the other one WARNING
engage a gear and the electric parking remove the key, sliding it outwards;
brake; ❒ once the key has been removed, refit 57) It is advisable to contact a Jeep
❒ using the wrench A fig. 142 (located lower cover C, make sure it locks Dealership to have the refitting procedure
in the casing containing the on-board correctly and tighten the fixing screws B carried out. If you would like to proceed
documents), undo the fixing screws autonomously, special attention must
firmly.
be paid to the correct coupling of
B fig. 143 for the lower cover C; the retaining clips. Otherwise, noise might
❒ remove the lower steering wheel be heard due to an incorrect fastening
cover C by releasing it from its housing; of the lower cover with the upper cover.
144
TOWING THE
VEHICLE WARNING
ATTACHING THE TOW
HOOK 161) For versions with mechanical key,
161) 162) 163) before towing, turn the ignition key to MAR
The tow hook provided with the vehicle and then to STOP without removing it.
The steering column will automatically lock
is located in the tool box inside the when the key is removed and the wheels
luggage compartment. cannot be steered. Also check that the
gearbox is in neutral (on versions equipped
Front with automatic transmission, check that
Release plug A fig. 145 by pressing the the gear lever is in N position). For versions
with electronic key, bring the ignition
lower part, take tow hook B from its
device to MAR and then to STOP, without
housing in the tool support and tighten opening the door.
it securely on the front threaded pin. 162) The brake servo and the
electromechanical power steering will not
work while the vehicle is being towed.
You will therefore need to apply more force
on the brake pedal and steering wheel.
Do not use flexible ropes when towing, and
avoid jerky movements. While towing,
make sure that the trailer hitch does not
146 J0A0163C
damage any components it is touching.
When towing the vehicle, you must comply
with all specific traffic regulations and
adopt an appropriate driving behaviour. Do
not start the engine while towing the
145 J0A0160C vehicle. Before tightening the ring, clean
the threaded housing thoroughly. Make
Rear sure that the ring is fully fastened in the
Remove plug A fig. 146, take tow hook housing before towing the vehicle.
B from its housing in the tool support
and tighten it securely on the rear
threaded pin. 147 J0A0161C
Trailhawk versions: tow hook A fig. 147,
fixed type, is secured to the vehicle
body.
145
163) The front and rear tow hooks should BROKEN-DOWN
IN AN EMERGENCY
be used only for emergencies on the road. VEHICLE TOWING
You are allowed to tow the vehicle for
short distances using an appropriate
device in accordance with the highway
It is recommended to tow the vehicle
code (a rigid bar), to move the vehicle on with all four wheels lifted from the
the road in readiness for towing or ground on the platform of a rescue
transport via a breakdown vehicle. Tow vehicle.
hooks MUST NOT be used to tow vehicles
off the road or where there are obstacles VERSIONS WITH FOUR-WHEEL
and/or for towing operations using ropes or DRIVE (4WD) AND AUTOMATIC
other non-rigid devices. Respecting the TRANSMISSION
above conditions, towing must take place
with two vehicles (one towing, the other IMPORTANT Avoid lifting the front (or
towed) aligned as much as possible along rear) wheels only. Lifting the front (or
the same centre line. rear) wheels only while towing might
damage the transmission or the transfer
unit.
IMPORTANT If a vehicle is towed
without complying with the above
requirements, the transmission and/or
the transfer unit might be seriously
damaged. Damage due to an incorrect
towing will not be covered by the
warranty.
146
SERVICING AND MAINTENANCE
Correct maintenance permits the SCHEDULED SERVICING ...............148

performance of the vehicle to be ENGINE COMPARTMENT...............155
maintained over time, as well as limited
running costs and safeguarding the BATTERY RECHARGING ................160
efficiency of the safety systems. SERVICING PROCEDURES ............161
This chapter explains how. LIFTING THE VEHICLE....................163
WHEELS AND TYRES.....................163
BODYWORK...................................164
147
SCHEDULED IMPORTANT Scheduled Servicing ❒ check front disc brake pad condition

SERVICING Coupons are required by the and wear;
Manufacturer. Failure to have them ❒ check cleanliness of bonnet and
Correct servicing is crucial for carried out may invalidate the warranty. luggage compartment locks,
guaranteeing a long life for the vehicle It is advisable to inform a Jeep cleanliness and lubrication of linkage;
under the best conditions. For this Dealership of any small operating ❒ visually inspect condition of: engine,
reason, Jeep has planned a series of irregularities without waiting for the next gearbox, transmission, pipes and hoses
checks and services at fixed distance service. (exhaust/fuel system/brakes) and
intervals and, where provided, at fixed
PERIODIC CHECKS rubber elements (boots/sleeves/
time intervals, as described in the
Every 1,000 km or before long bushes, etc.);
Scheduled Servicing Plan.
Before each service, it is always journeys, check and if necessary, top ❒ check battery charge and battery
necessary to carefully follow the up: engine coolant level; brake fluid fluid level (electrolyte);
instructions in the Scheduled Servicing level; screen washer fluid level; tyre ❒ visually inspect condition of the
Plan (e.g. periodically check level of inflation pressure and condition; lighting accessory drive belts;
fluids, tyre pressure, etc.). system operation (headlights, direction ❒ check and, if necessary, change
Scheduled Servicing is offered by all indicators, hazard warning lights, etc.); engine oil and replace oil filter;
Jeep Dealerships according to a set screen washer/wiper system operation
❒ check and, if necessary, replace
time schedule. If, during each and positioning/wear of windscreen/
pollen filter;
operation, in addition to the ones rear window wiper blades.
Every 3,000 km, check and top up if ❒ check and, if necessary, replace air
scheduled, the need arises for further
required: engine oil level. cleaner.
replacements or repairs, these may
On versions with automatic
be carried out with your explicit HEAVY-DUTY USE OF THE transmission, change transmission oil
agreement only. If your vehicle is used VEHICLE
and replace oil filter every 60,000 km
frequently for towing, the interval If the vehicle is used under one of the (40,000) or every 4 years.
between one service operation and the following conditions: towing a trailer
next should be reduced. or caravan; dusty roads; short (less
than 7-8 km), repeated journeys with
sub-zero outside temperatures; engine
often idling or driving long distances
at low speed or long periods of
inactivity, the following checks must be
carried out more often than indicated
in the Scheduled Servicing Plan:
148
SCHEDULED SERVICING PLAN (petrol versions)
The checks listed in the Scheduled Servicing Plan, after reaching 120,000 km/8 years, must be cyclically repeated starting from
the first interval, thus following the same intervals as before.
Thousands of miles 9 18 27 36 45 54 63 72 81 90
Thousands of kilometres 15 30 45 60 75 90 105 120 135 150
Years 1 2 3 4 5 6 7 8 9 10
Check tyre condition/wear and adjust pressure, if
necessary. Check TireKit recharge (where provided) expiry ● ● ● ● ● ● ● ● ● ●
date
Check operation of lighting system (headlights, direction
indicators, hazard warning lights, luggage compartment,
● ● ● ● ● ● ● ● ● ●
passenger compartment, glove compartment, instrument
panel warning lights, etc.)
Check and, if necessary, top up fluid levels (engine
coolant, hydraulic clutch/brakes, screen washer, battery, ● ● ● ● ● ● ● ● ● ●
etc.)
Check exhaust emissions/smokiness ● ● ● ● ● ● ● ● ● ●
Use the diagnosis socket to check supply/engine
management system operation, emissions and, where ● ● ● ● ● ● ● ● ● ●
provided, engine oil degradation
Visually inspect condition of: exterior bodywork,
underbody protection, pipes and hoses (exhaust, fuel
● ● ● ● ●
system, brakes), rubber elements (gaiters, sleeves,
bushes, etc.)
Check windscreen/rear window wiper blade position/wear ● ● ● ● ●
149
Years 1 2 3 4 5 6 7 8 9 10
Check operation of screen wiper/washer system and
● ● ● ● ●
adjust jets, if necessary
Check cleanliness of bonnet and luggage compartment
● ● ● ● ●
locks, as well as cleanliness and lubrication of linkages
Visually inspect condition and wear of front disc brake
● ● ● ● ● ● ● ● ● ●
pads and operation of pad wear indicator
Visually inspection of condition and wear of rear disc brake
● ● ● ● ● ● ● ● ● ●
Visual check of accessory drive belt(s) (versions without
●
automatic tensioner)
Check tension of accessory drive belt (versions without
● ●
automatic tensioner) (or every 2 years)
Visually inspect condition of toothed timing drive belt ●
Check drive transmission idler unit (PTU) oil level ● ●
Check rear differential oil level ● ●
Change engine oil and replace oil filter (1) ● ● ● ● ●
(1) If the vehicle's annual mileage is less than 10,000 km, the engine oil and filter must be replaced every year.
150
Years 1 2 3 4 5 6 7 8 9 10
Replace spark plugs (2) ● ● ● ● ●
Replace accessory drive belt(s) (3)
Replace toothed timing drive belt (3)
Replace air cleaner cartridge (4) ● ● ● ● ●
Change brake fluid ● ● ● ● ●
Replace passenger compartment cleaner (4) (O) (●) O ● O ● O ● O ● O ●
(2) For 1.4 Turbo MultiAir versions, to guarantee correct operation and prevent serious damage to the engine, it is essential to proceed as follows: only use spark
plugs specifically certified for these engines; all spark plugs should be of the same type and brand (see the “Engine” paragraph in the “Technical specifications”
section); strictly comply with the replacement intervals in the Scheduled Servicing Plan. It is advisable to contact a Jeep Dealership for plug replacement.
(3) Areas that are not dusty: advised maximum mileage 120,000 km. Regardless of the mileage, the belt must be replaced every 6 years.
Dusty areas and/or demanding use (cold climates, town use, long periods of idling): advised maximum mileage 60,000 km. Regardless of the mileage, the belt
must be replaced every 4 years.
(4) If the vehicle is used in dusty areas, this cleaner must be replaced every 15,000 km.
(O) Recommended operations
(●) Mandatory operations
151
SCHEDULED SERVICING PLAN (Diesel versions)

The checks listed in the Scheduled Servicing Plan, after reaching 120,000 km/6 years, must be cyclically repeated starting from
the first interval, thus following the same intervals as before.
Years 1 2 3 4 5 6 7 8 9 10
Check tyre condition/wear and adjust pressure, if
necessary. Check TireKit recharge (where provided) expiry ● ● ● ● ● ● ● ● ● ●
date
Check operation of lighting system (headlights, direction
indicators, hazard warning lights, luggage compartment,
● ● ● ● ● ● ● ● ● ●
passenger compartment, glove compartment, instrument
panel warning lights, etc.)
Check and, if necessary, top up fluid levels (engine
coolant, hydraulic clutch/brakes, screen washer, battery, ● ● ● ● ● ● ● ● ● ●
etc.)
Check exhaust emissions/smokiness ● ● ● ● ● ● ● ● ● ●
Use the diagnosis socket to check supply/engine
management system operation, emissions and, where ● ● ● ● ● ● ● ● ● ●
provided, engine oil degradation
Visually inspect condition of: exterior bodywork,
underbody protection, pipes and hoses (exhaust, fuel
● ● ● ● ●
system, brakes), rubber elements (gaiters, sleeves,
bushes, etc.)
Check windscreen/rear window wiper blade position/wear ● ● ● ● ●
152
Years 1 2 3 4 5 6 7 8 9 10
Check operation of screen wiper/washer system and
● ● ● ● ●
adjust jets, if necessary
Check cleanliness of bonnet and luggage compartment
● ● ● ● ●
locks, as well as cleanliness and lubrication of linkages
Visually inspect condition and wear of front disc brake
● ● ● ● ● ● ● ● ● ●
Visually inspection of condition and wear of rear disc brake
● ● ● ● ● ● ● ● ● ●
Visual check of accessory drive belt(s) (versions without
●
Check tension of auxiliary drive belt (versions without
● ●
Visually inspect conditions of toothed timing drive belt ● ●
Check drive transmission idler unit (PTU) oil level ● ●
Check rear differential oil level ● ●
Change engine oil and replace oil filter (versions with DPF) (1)
(1) The actual interval for changing engine oil and replacing the engine oil filter depends on the vehicle usage conditions and is signalled by the warning light or
message in the instrument panel. In any case, it must never exceed 2 years.
If the vehicle is mainly used in towns and cities, change the engine oil and filter every year.
153
Years 1 2 3 4 5 6 7 8 9 10
Replace accessory drive belt(s) (2)
Replace toothed timing drive belt (2)
Replace fuel filter cartridge (3) ● ● ●
Replace air cleaner cartridge (4) ● ● ● ● ●
Change brake fluid ● ● ● ● ●
Replace passenger compartment cleaner (4) (O) (●) O ● O ● O ● O ● O ●
(2) Areas that are not dusty: advised maximum mileage 120,000 km. Regardless of the mileage, the belt must be replaced every 6 years.
Dusty areas and/or demanding use (cold climates, town use, long periods of idling): advised maximum mileage 60,000 km. Regardless of the mileage, the belt
must be replaced every 4 years.
(3) If the vehicle runs on fuel with quality below the relevant European specification, this filter must be replaced every 20,000 km
(4) If the vehicle is used in dusty areas, this cleaner must be replaced every 20,000 km.
(O) Recommended operations
(●) Mandatory operations
NOTE change automatic transmission oil and replace oil filter every 240,000 km.
154
ENGINE COMPARTMENT .
CHECKING LEVELS
164) 165) 58)
1.4 Turbo MultiAir versions
148 J0A0138C
A. Engine oil dipstick – B. Engine oil cap/filler – C. Engine coolant – D. Windscreen/rear window washer fluid – E. Brake fluid – F. Battery
155
1.6 16V MultiJet versions
149 J0A0139C
156
2.0 16V MultiJet versions
150 J0A0140C
157
ENGINE OIL WINDSCREEN/REAR BATTERY

WINDOW WASHER FLUID
Check that the oil level is between the 172) 173) 174) 175) 6)
MIN and MAX references on the If the level is too low, lift reservoir cap D The battery does not require the
dipstick A. If the oil level is near or even and add the fluid described in the electrolyte to be topped up with distilled
under the MIN line, add oil using the chapter "Technical Specifications". water. A periodic check carried out at
filler B to reach the MAX line. 168) 169) a Jeep Dealership is, however,
IMPORTANT The headlight washer necessary to check efficiency.
166) 59)
Take out the engine oil dipstick A, clean system will not operate when the fluid IMPORTANT After the battery is
it with a lint-free cloth and reinsert it. level is low, even though the disconnected, the steering must be
Extract it again and check that the level windscreen/rear window washer initialised. The warning light on the
is between the MIN and MAX marks continues to operate. On some instrument panel switches on to
on the dipstick. versions there is a reference notch on indicate this. To carry out this
the dipstick: ONLY the windscreen/rear procedure turn the steering wheel all
Engine oil consumption
window washer operates with the the way from one end to the other
60) 4) level below this reference. or drive in a straight line for about a
The maximum engine oil consumption hundred metres.
BRAKE FLUID
is usually 400 grams every 1,000 km.
During the initial period of use the Check that the fluid is at the max. level. IMPORTANT If the charge level remains
engine oil consumption conditions If the fluid level in the reservoir is too under 50% for a long time, the battery
should be considered as having low, undo reservoir cap E and add the is damaged by sulphation, reducing
stabilised after the first 5000 - 6000 fluid described in the chapter "Technical its capacity and efficiency at start-up.
km. Specifications".
170) 171) 62)
CLIMATE CONTROL
ENGINE COOLANT SYSTEM MAINTENANCE
If the level is too low, unscrew the cap AUTOMATIC
TRANSMISSION In winter, the climate control system
of reservoir C and add the fluid ACTIVATION SYSTEM OIL must be turned on at least once a
described in the "Technical month for about 10 minutes. Have the
Specifications" section. The transmission control oil level should
system inspected at a Jeep Dealership
only be checked at a Jeep Dealership.
167) 61) before the summer.
5)
158
171) The symbol on the container 61) PARAFLU UP anti-freeze fluid is used in
indicates a synthetic brake fluid, which is the engine cooling system; use the same
WARNING different from a mineral fluid. Using a fluid type as that already in the cooling
mineral fluid will damage the special rubber system when topping up. PARAFLU UP
seals of the braking system beyond repair. may not be mixed with other types of
164) Never smoke when performing
172) Battery fluid is poisonous and anti-freeze fluids. In the event of topping up
operations in the engine compartment.
corrosive. Avoid contact with the skin and with an unsuitable product, under no
Flammable gases and fumes may be
eyes. Keep open flames away from the circumstances start the engine and contact
present and risk igniting.
battery and do not use objects that might a Jeep Dealership.
165) Be very careful when working in the
create sparks: risk of explosion and fire. 62) Avoid allowing brake fluid, which is
engine compartment when the engine
173) Using the battery with insufficient extremely corrosive, to come into contact
is hot: you may get burned.
fluid irreparably damages the battery and with painted areas. Should it happen, wash
166) If the engine oil is being topped up, immediately with water.
may cause an explosion.
wait for the engine to cool down before
174) If the vehicle must remain unused for 63) Incorrect assembly of electrical and
loosening the filler plug, particularly for
a long time at a very low temperature, electronic accessories may cause severe
vehicles with aluminium plug (where
remove the battery and take it to a warm damage to your vehicle. Go to a Jeep
provided). CAUTION: risk of burns!
place, to avoid freezing. Dealership if you want to install accessories
167) The cooling system is pressurised. If (e.g. anti-theft, radio phone, etc.): they will
necessary, only replace the cap with 175) When performing any operation on suggest the most suitable devices and
another original one or the operation of the the battery or near it, always protect your advise you whether a higher capacity
system may be adversely affected. Do eyes with special goggles. battery needs to be installed.
not remove the reservoir cap when the
engine is hot: risk of burns.
168) Do not travel with the windscreen WARNING WARNING
washer reservoir empty: the windscreen
washer is essential for improving visibility.
Repeated operation of the system without 58) Be careful not to confuse the various 4) Used engine oil and oil filters contain
fluid could damage or cause rapid types of fluids while topping up: they substances which are harmful to the
deterioration of some system components. are not compatible with each other! environment. You are advised to contact a
169) Certain commercial additives for Topping up with an unsuitable fluid could Jeep Dealership to have the oil and filters
windscreen washer fluids are inflammable. severely damage your vehicle. changed.
The engine compartment contains hot 59) The oil level should never exceed the 5) Used transmission fluid contains
components which may set it on fire. MAX mark. substances that are harmful to the
170) Brake fluid is poisonous and highly 60) Do not add oil with specifications other environment. It is advisable to contact a
corrosive. In the event of accidental than those of the oil already in the engine. Jeep Dealership for oil changes.
contact, immediately wash the affected 6) Batteries contain substances which are
parts with water and mild soap. Then rinse very dangerous for the environment. For
thoroughly. Call a doctor immediately if battery replacement, contact a Jeep
swallowed. Dealership.
159
BATTERY IMPORTANT The cables of the VERSIONS WITH

RECHARGING electrical system must be correctly STOP/START SYSTEM
reconnected to the battery, i.e. the To recharge, proceed as follows:
IMPORTANT
positive cable (+) to the positive ❒ disconnect the connector A fig. 151
IMPORTANT After placing the ignition terminal and the negative cable (–) to (pressing the button B) from the sensor
device to STOP and having closed the negative terminal. The battery C monitoring the battery conditions,
the driver side door, wait at least one terminals are marked with the positive on the negative pole (–) D of the
minute before disconnecting the (+) and negative (–) symbols, and are battery;
electrical supply from the battery. When shown on the battery cover. The battery
❒ connect the positive cable (+) of the
reconnecting the electrical supply to terminals must also be corrosion-free
battery charger to the positive battery
the battery, make sure that the ignition and firmly secured to the terminals. If a
terminal E and the negative cable (–) to
device is in the STOP position and "quick-type" battery charger is used
sensor terminal D as shown;
the driver side door is closed. with the battery fitted on the vehicle,
before connecting it disconnect both ❒ turn on the battery charger. At the
IMPORTANT Charging should be slow cables of the battery itself. Do not use a end of the charging process, switch the
at a low ampere rating for "quick-type" battery charger to provide battery charger off;
approximately 24 hours. Charging for a the starting voltage. ❒ after having disconnected the
longer time may damage the battery. charger, reconnect connector A to the
VERSIONS WITHOUT
STOP/START SYSTEM sensor C as in fig. 151.
To recharge, proceed as follows:
❒ disconnect the terminal from the
negative battery pole;
❒ connect the charger cables to the
battery terminals, observing the polarity;
❒ turn on the charger;
❒ when it is recharged, turn the charger
off before disconnecting it from the
battery;
❒ reconnect the negative battery
terminal.
160
SERVICING Replacing the rear window
PROCEDURES wiper blade
Proceed as follows:
❒ raise cover A fig. 153, undo nut B
176) 177) 178) and remove arm C;
64) 65) 66) 67) 68) 69) 70) 71) ❒ correctly position the new arm, fully
WINDSCREEN/REAR tighten the nut B then lower the cover
WINDOW WIPER A.
Replacing the windscreen
wiper blades
Proceed as follows:
❒ raise the wiper arm, press tab A fig.
152 of the attachment spring and
remove the blade from the arm;
153 J0A0346C
151 A0K0530C IMPORTANT Do not operate the rear

window wiper with the blade lifted from
the rear window.
Windscreen washer
152 J0A0345C
The windscreen jets, located on the
bonnet, are fixed.
❒ fit the new blade, inserting the tab in If there is no jet of fluid, firstly check
the dedicated housing in the arm and that there is fluid in the reservoir (see
checking that it is locked; paragraph “Engine compartment”
❒ lower the wiper arm on the in this chapter). Then check that the
windscreen. nozzle holes are not clogged; use
IMPORTANT Do not operate the a needle to unblock them if necessary.
windscreen wiper with the blades lifted
from the windscreen.
161
IMPORTANT In versions with a sun 68) The air conditioning system contains

roof, make sure that the sun roof is high-pressure coolant: to prevent damage
WARNING to people or the system, any topping-up
closed before operating the window with fuel or repairs that involves
washer jets. disconnection of the pipes must be carried
64) Incorrect maintenance of the vehicle or
out by a Jeep Dealership.
Rear window washer failure to carry out operations or repairs
(when necessary) may lead to more 69) Vehicles equipped with a catalytic
The rear window washer jets are fixed. expensive repairs, damage to other converter must be exclusively supplied with
The nozzle holder is located above components or a negative impact on the unleaded petrol. Leaded petrol would
the rear window. vehicle performance. Have any operating permanently damage the catalytic
faults immediately checked by a Jeep converter and eliminate its ability to reduce
Dealership. polluting emissions, seriously
compromising the engine performance,
65) The vehicle is equipped with fluids
WARNING which would be irreparably damaged. If the
optimised for protecting its performance
engine does not work correctly, especially
and duration, and to extend servicing
if it starts irregularly or if there is a reduction
intervals. Do not use chemicals for washing
176) The air intake system (air cleaner, of its performance, immediately go to a
these components since they may
rubber hoses, etc.) can be a protection in Jeep Dealership. Prolonged and faulty
damage the engine, the gearbox or the
the case of blowbacks from the engine. operation of the engine may cause
climate control system. This damage is not
DO NOT REMOVE this system unless you overheating of the converter and, as a
covered by the vehicle’s warranty. If, due
need to carry out repair or servicing consequence, possible damage to the
to malfunction of a component, washing is
operations. Before starting the engine converter and the vehicle.
needed, only use the fluid specific for
make sure the system is not dismantled: 70) Using a gearbox fluid different from that
that procedure.
failure to comply with this precaution approved may compromise gearshifting
may cause serious injuries. 66) An excessive or insufficient amount of
quality and/or cause vibration of the
oil in the block is extremely harmful for
177) Exhaust emissions are very gearbox itself.
the engine. Make sure it is always at an
dangerous and may be fatal. They contain 71) It is recommended to have the vehicle
adequate level.
carbon monoxide, a colourless and serviced by a Jeep Dealership. When
odourless gas which, if inhaled, may cause 67) Always require the use of only
carrying out normal periodic operations
fainting and poisoning. compressor coolants and lubricants
and small servicing interventions personally
approved and suitable for the specific air
178) The exhaust system can reach high on the vehicle, it is recommended to use
conditioning system fitted on the vehicle.
temperatures and cause a fire if the vehicle suitable equipment, original spare parts
Some non-approved coolants are
is parked on flammable material. Dry grass and the necessary fluids. Do not carry out
flammable and may explode, with the risk
or leaves can also catch fire if they come any interventions if you don't have the
of injuries. The use of non-approved
into contact with the exhaust system. necessary experience.
coolants or lubricants may adversely affect
Do not park or use the vehicle in a place in
system efficiency, leading to expensive
which the exhaust system might come
repairs.
into contact with flammable material.
162
LIFTING THE WHEELS AND TYRES
VEHICLE WARNING
If the vehicle is to be lifted, go to a Jeep SUGGESTIONS ABOUT
Dealership which is equipped with the 72) Road holding depends also on the
THE ROTATION OF THE
correct tyre inflating pressure.
arm lift or workshop lift. TYRES
73) If the pressure is too low the tyre
179) 72) 73) 74) 75) overheats and this can cause it serious
The front and rear tyres are subject to damage.
different loads and stress due to 74) Do not cross switch the tyres, moving
steering, manoeuvres and braking. For them from the right of the vehicle to the left
this reason they are subject to uneven and vice versa.
wear. 75) Never submit alloy rims to repainting
To resolve this problem, tyres should be treatments requiring the use of
rotated at the appropriate time. This temperatures exceeding 150°C. The
mechanical properties of the wheels could
operation is recommended for tyres be impaired.
with a deep tread pattern, suitable both
for on-road and off-road driving.
Tyre rotation contributes to the
preservation of the grip and traction
performance on wet, muddy or snowy
roads, guaranteeing optimal driveability
of the vehicle.
In the case of irregular wear of the
tyres, the reason must be identified and
corrected before rotating them.
WARNING
179) Do not cross switch the tyres if they

are "unidirectional" type. In this case,
always take care not to fit the tyres with a
direction of rotation that is opposite to that
indicated: you would risk losing grip and
control of the vehicle.
163
BODYWORK

PRESERVING THE WARNING WARNING
BODYWORK
Paintwork 76) 7) 76) In order to preserve the aesthetic 7) Detergents cause water pollution. Only
appearance of the paint abrasive products wash your vehicle in areas equipped to
Touch up abrasions and scratches and/or polishes should not be used for collect and treat wastewater from this type
immediately to prevent the formation of cleaning the vehicle. of activity.
rust. 77) Avoid washing with rollers and/or
Some parts of the vehicle are painted brushes in washing stations. Wash the
with a matte paintwork which requires vehicle only by hand using neutral pH
detergents; dry it with a wet chamois
special care for its preservation 77)
leather. Abrasive products and/or polishes
To correctly wash the vehicle, follow should not be used for cleaning the vehicle.
these instructions: Bird droppings must be washed off
❒ is the vehicle is washed remove the immediately and thoroughly as the acid
aerial from the roof; they contain is particularly aggressive.
Avoid (if at all possible) parking the vehicle
❒ if high pressure jets or cleaners are under trees; remove vegetable resins
used to wash the vehicle, keep a immediately as, when dried, it may only be
distance of at least 40 cm from the possible to remove them with abrasive
products and/or polishes, which is highly
bodywork to avoid damage or inadvisable as they could alter the typical
alteration. Build up of water could opaqueness of the paint. Do not use pure
cause damage to the vehicle in the long screen washer fluid for cleaning the
term. windscreen and rear window; dilute it min.
50% with water. Only use pure screen
washer fluid when strictly necessary due to
outside temperature conditions.
164
TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA....................166
Everything you may find useful for ENGINE ..........................................167
understanding how your vehicle WHEELS .........................................169
is made and works is contained in this
chapter and illustrated with data, tables DIMENSIONS..................................171
and graphics. For the enthusiasts and WEIGHTS........................................174
the technician, but also just for those
who want to know every detail of their SUPPLIES.......................................175
vehicle. FLUIDS AND LUBRICANTS ............176
PERFORMANCE .............................178
FUEL CONSUMPTION ....................178
CO2 EMISSIONS ............................179
PRESCRIPTIONS FOR HANDLING
THE VEHICLE AT THE END OF ITS
LIFE ................................................179
165
IDENTIFICATION
DATA
VEHICLE IDENTIFICATION
NUMBER
The Vehicle Identification Number (VIN)
is stamped on a plate on the front left
corner of the dashboard cover fig. 154,
which can be seen from outside the
vehicle, through the windscreen.
155 J0A0028C
ZFA
520V
P70
P00
VIN PLATE
0016
The plate is located on the left side

front door pillar fig. 156 and shows the
data about:
❒ A: correct value of smoke coefficient
(for Diesel engines);
ZFA52
0VP70
P0000
16 ❒ B: maximum permitted weights;
❒ C: engine type, bodywork version
154 J0A0030C
156
code, spare part number, colour code. J0A0446C
This number is also stamped on the

passenger compartment floor, next to
the front right seat.
Slide flap A fig. 155, operating as
shown in the figure, to access.
166
ENGINE
Versions 1.4 Turbo MultiAir 136/140 HP 1.6 16V MultiJet 115/120 HP

Type code 55263624 55263113
Cycle Otto Diesel
Number and position of cylinders 4 in line 4 in line
Piston bore and stroke (mm) 72.0 x 84.0 79.5 x 80.5
Total displacement (cm³) 1368 1598
Compression ratio 10 : 1 16.5 : 1
Maximum power (EC) (kW) 100 (*) / 103 85 (*) / 88
Maximum power (EC) (HP) 136 (*) / 140 115 (*) / 120
corresponding engine speed (rpm) 5000 3750
Maximum torque (EC) (Nm) 230 320
Maximum torque (EC) (kgm) 23.5 32.6
corresponding engine speed (rpm) 1750 1750
Spark plugs NGK IKR9J8 –
Fuel Unleaded petrol 95 RON (EN 228 Diesel for motor vehicles (EN 590
Specification) Specification)
(*) Where provided
167
Versions 2.0 16V MultiJet 120 HP 2.0 16V MultiJet 140 HP 2.0 16V MultiJet 170 HP
Type code 55263087 55263087 55263088
Cycle Diesel Diesel Diesel
Number and position of cylinders 4 in line 4 in line 4 in line
Piston bore and stroke (mm) 83 x 90.4 83 x 90.4 83 x 90.4
Total displacement (cm³) 1956 1956 1956
Compression ratio 16.5 16.5 16.5
Maximum power (EC) (kW) 88 103 125
Maximum power (EC) (HP) 120 140 170
corresponding engine speed (rpm) 4000 3750 3750
Maximum torque (EC) (Nm) 320 350 350
Maximum torque (EC) (kgm) 32.6 35.7 35.7
corresponding engine speed (rpm) 1250 1500 1750
Fuel Diesel for motor vehicles (EN Diesel for motor vehicles (EN Diesel for motor vehicles (EN
590 Specification) 590 Specification) 590 Specification)
168
WHEELS
RIMS AND TYRES PROVIDED
180) 181)
Versions Rims Tyres Snow tyres

6.5J x 16 ET40 215/65 R16 98H 215/65 R16 98Q (M+S)
1.4 Turbo MultiAir 7J x 17 ET40 215/60 R17 96H 215/60 R17 96Q (M+S)
7J x 18 ET 40 225/55 R18 98V 225/55 R18 98Q (M+S)
6.5J x 16 ET40 215/65 R16 98H 215/65 R16 98Q (M+S)
1.6 16V MultiJet 7J x 17 ET40 215/60 R17 96H 215/60 R17 96Q (M+S)
7J x 18 ET 40 225/55 R18 98V 225/55 R18 98Q (M+S)
6.5J x 16 ET40 215/65 R16 98H 215/65 R16 98Q (M+S)
6.5J x 17 ET40 (*) 215/60 R17 96V (*) 215/60 R17 96Q (M+S) (*)
2.0 16V MultiJet
7J x 17 ET40 215/60 R17 96H 215/60 R17 96Q (M+S)
7J x 18 ET 40 225/55 R18 98V 225/55 R18 98Q (M+S)
(*) Trailhawk versions
Space-saver wheel (where provided)
Tyre: T145/90 R16 106M
Rim: 4.0 B x 16H ET22
WARNING
180) If winter tyres with a lower speed rating than that indicated in the Registration Document are used, do not exceed the maximum speed
corresponding to the speed rating of the tyres used.
181) DO NOT fit wheel hub caps when using integral hub caps fixed (with springs) to the steel rim and after sale tyres provided with Rim
Protector. Use of unsuitable tyres and hub caps may cause sudden decrease of tyre pressure.
169
COLD TYRE INFLATION PRESSURE (bar)
When the tyres are warm, the inflation pressure should be +0.3 bar compared with the prescribed value. However, recheck that
the value is correct with the tyre cold. With snow tyres, add +0.2 bar to the pressure value prescribed for standard tyres.
Unladen/medium load Full load Full size spare Space-saver

Tyres wheel
Front Rear Front Rear wheel (*)
215/65 R16 98H 2,4 2,2 2,4 2,4
215/60 R17 96H / 96V 2,4 2,2 2,4 2,4 2,4 4,2
225/55 R18 98V 2.4 2.2 2.4 2.4
(*) After using the spare wheel in an emergency, where necessary, align the pressure of the wheel to the recommended value as soon as possible, with reference to
the following table.
SNOW CHAINS 78)
Front- and all-wheel drive versions: 7-mm snow chains can be used on 215/65 R16 tyres. Chains cannot be fitted on
215/60 R17 and 225/55 R18 tyres.
Important
The use of snow chains should be in compliance with local regulations of each country. In certain countries, tyres marked with
code M+S (Mud and Snow) are considered as winter equipment; therefore their use is equivalent to that of the snow chains.
The snow chains may be applied only to the front wheel tyres.
Check the tension of the snow chains after the first few metres have been driven.
Using snow chains with tyres with non-original dimensions may damage the vehicle.
Using different size or type (M+S, snow, etc.) tyres between front and rear axle may adversely affect vehicle driveability, with the
risk of losing control of the vehicle and resulting accidents.
WARNING
78) Keep your speed down when snow chains are fitted; do not exceed 50 km/h. Avoid potholes, steps and pavements and avoid driving for
long distances on roads not covered with snow to prevent damaging the vehicle and the road surface.
170
DIMENSIONS
Dimensions are expressed in mm and refer to the vehicle equipped with its standard-supplied tyres. Height is measured with
vehicle unladen.
157 J0A0019C
A B C D E (*) F G H I
4255 / 4259 1667 / 1697 1551 / 1541 1553 / 1541

(**) 892 2570 793 / 797 (**) (***) (**) 2023 (**) 1805
(*) Trailhawk versions: 1697 / 1727 (with roof rack bars)

(**) Trailhawk versions
(***) With roof rack bars
171
MINIMUM GROUND CLEARANCE/TYPICAL ANGLES
158 J0A0242C
"Minimum ground clearance" (reference A fig. 158)

The clearance value is measured next to the lower edge of the differential. This value also defines those for the "Approach
angle" the "Departure angle" and the "Breakover angle".
Dimensions are expressed in mm and refer to the vehicle equipped with its standard-supplied tyres.
Front wheel drive (FWD) versions: 171 mm
Four wheel drive (4WD) versions: 201 mm
Trailhawk versions with four wheel drive (4WD LOW): 225 mm
172
"Approach angle" (reference B fig. 158)
The approach angle is determined by the horizontal line of the road surface and by the tangent line passing between the front
wheel and the most projecting low point of the vehicle.
The wider the angle, the lower the chance to hit an obstacle with the body or chassis, climbing a steep slope or overcoming an
obstacle.
Front wheel drive (FWD) versions: 17.9°
Four wheel drive (4WD) versions: 21°
Trailhawk versions with four wheel drive (4WD LOW): 30.5°
"Departure angle" (reference C fig. 158)
The departure angle is determined by the same lines of the "Approach angle", and refers to the rear part of the vehicle.
Four wheel drive (4WD) versions: 32.1°
"Breakover angle" (reference D fig. 158)
The value of the "Breakover angle" is linked to the ground clearance of the vehicle and indicates the attitude of the vehicle to
overcome a wedge, more or less steep, preventing the vehicle from resting on the ground with the body or chassis after
touching the wedge with its lowest and most projecting parts (usually the underbody), this would highly reduce wheel grip.
The wheels, without a suitable grip to the ground, will not have sufficient hold to move the vehicle, and will surge.
The higher the ground clearance, the wider the breakover angle. Always bear in mind that the higher the ground clearance, the
lower the stability, due to a higher centre of gravity which reduces the side tipping angle.
Four wheel drive (4WD) versions: 24°
173
WEIGHTS
TECHNICAL SPECIFICATIONS Weights (kg) 1.4 Turbo MultiAir 1.6 16V MultiJet 2.0 16V MultiJet 120
/ 140 HP
2.0 16V MultiJet
170HP
Unladen weight (with all fluids, fuel tank
filled to 90% and without optional 1320 1390 1430 / 1530 (*) 1535
equipment)
Payload including the driver (**) 545 515 580 / 550 (*) 545
Maximum permitted loads (***)

– front axle 1050 1050 1150 1150
– rear axle 900 900 1000 1000
– total: 1865 1905 2010 / 2080 (*) 2080
Towable loads
1000 1000 1500 1500
– braked trailer
– trailer without brakes 400 400 400 400
Maximum load on roof (****) 70 70 70 70

Maximum load on tow hitch (trailer with 60 60 60 60
brakes)
(*) Versions with automatic transmission
(**) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen vehicle weight increases, thus reducing the specified payload in relation to the maximum
permitted loads.
(***) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum permitted loads.
(****) Versions with roof bars
174
SUPPLIES
1.4 Turbo MultiAir 1.6 16V MultiJet 2.0 16V MultiJet

Fuel tank (litres): 48 48 48
including a reserve of (litres): 5÷7 5÷7 5÷7
Engine cooling system (litres): 5.2 6.1 6.5
Engine sump (litres): 4.1 4.4 3.9
Engine sump and filter (litres): 4.5 4.8 4.3
Gearbox/differential casing 1.8 1.8 1.8 (*) / 6.0 (**)
(litres):
Idler unit (PTU) (litres): – – 0.4
Rear differential (litres): – – 0.6
Hydraulic brake circuit (kg): 0.83 0,83 0.83
Windscreen and rear window 2.5 2.5 2.5
washer fluid reservoir (litres):
(*) Versions with manual gearbox
(**) Versions with automatic transmission
175
FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of
the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission
specifications. Lubricant quality is crucial for engine operation and duration.
Use Fluid and lubricant specifications for Replacement interval

correct vehicle operation
The use of SAE 0W-30 ACEA C2 grade totally
Lubricant for petrol engines 79) synthetic lubricant is recommended. FIAT According to the Scheduled Servicing Plan
9.55535-GS1 classification.
The use of SAE 0W-30 ACEA C2 grade totally
Lubricant for diesel engines 79) synthetic lubricant is recommended. FIAT According to the Scheduled Servicing Plan
9.55535-DS1 classification.
The use of SAE 75W grade synthetic lubricant Manual gearbox and differential and twin clutch
is recommended. FIAT 9.55550-MZ6 automatic transmission
classification.
The use of synthetic lubricant is recommended. Automatic transmission
FIAT 9.55550-AV5 classification.
The use of molybdenum disulphide grease for
Lubricants and greases for drive use at high temperatures is recommended. Wheel side constant velocity joints
transmission NL.G.I. 1-2 consistency. FIAT 9.55580
classification.
The use of specific grease for constant velocity
joints with low friction coefficient is Differential side constant velocity joints
recommended. NL.G.I. 0-1 consistency FIAT
9.55580 classification.
The use of SAE 75W-90 API GL5 grade Rear differential (RDM) and idler unit (PTU)
synthetic lubricant is recommended.
176
Use Fluid and lubricant specifications for Applications
correct vehicle operation
The use of synthetic fluid for brake and clutch
Brake fluid systems is recommended. Exceeds Hydraulic brakes and hydraulic clutch controls
specifications: FMVSS No. 116 DOT 4, ISO
4925 SAE J1704. FIAT 9.55597 classification.
The use of red protective agent with antifreeze
action based on inhibited monoethylene glycol Cooling circuits proportion: 50% water and
Protective agent for radiators with organic formula is recommended. Exceeds
CUNA NC 956-16, ASTM D 3306 50% coolant. (*) (**)
specifications. FIAT 9.55523 classification.
The use of additive for diesel with antifreeze
Diesel fuel additive and protective action for diesel engines is To be mixed with diesel (25 cc per 10 litres)
recommended.
The use of a mixture of spirits and surfactants is To be used diluted or undiluted in screen
Windscreen/rear window washer fluid recommended. Exceeds CUNA NC 956-11 washer/wiper systems
specifications. FIAT 9.55522 classification.
(*) IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.
(**) For particularly harsh climate conditions, a mixture of 60% coolant and 40% demineralised water is recommended.
In the case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated
ACEA performance can be used for topping up; in this case optimal performance of the engine is not guaranteed.
WARNING
79) The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.
177
PERFORMANCE
Top speed reachable after the initial period of usage of the vehicle.
Versions km/h
1.4 Turbo MultiAir 136/140 HP 181
1.6 16V MultiJet 115/120 HP 178
2.0 16V MultiJet 120 HP 176
FUEL CONSUMPTION
The fuel consumption values given in the table below are determined on the basis of the type-approval tests laid down by
specific European Directives.
IMPORTANT The type of route, traffic conditions, weather conditions, driving style, general condition of the vehicle, trim
level/equipment/accessories, use of the climate control system, vehicle load, presence of roof racks and other situations that
adversely affect the aerodynamics or wind resistance lead to different fuel consumption values than those measured. The
fuel consumption will get more regular only after having driven the first 3000 km.
FUEL CONSUMPTION ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (litres/100 km)
Versions Urban Extra-urban Combined

1.4 Turbo MultiAir 136/140 HP 7.6 5.1 6.0
1.6 16V MultiJet 115/120 HP 5.5 4.0 4.6
2.0 16V MultiJet 120 / 140 HP 6,0 / 6,9 (*) 4,6 / 5,2 (*) 5,1 / 5,8 (*)
2.0 16V MultiJet 170 HP 7.0 5.2 5.9
(*) Versions with automatic transmission and 4WD LOW
178
CO2 EMISSIONS
The CO2 emission levels given in the following table refer to combined consumption.
Versions CO2 EMISSIONS ACCORDING TO CURRENT EUROPEAN DIRECTIVE

(g/km)
1.4 Turbo MultiAir 136/140 HP 140
1.6 16V MultiJet 115/120 HP 120
2.0 16V MultiJet 120 / 140 HP 134 / 150 (*)
2.0 16V MultiJet 170 HP 151 (**)
(*) Versions with automatic transmission and 4WD LOW
(**) Trailhawk versions
PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF

ITS LIFE
Jeep has been committed for many years to safeguarding the environment through the constant improvement of its production
processes and manufacturing products that are increasingly "eco-compatible". To assure customers of the best possible
service in terms of respecting environmental laws and in response to European Directive 2000/53/EC governing vehicles at the
end of their life, Jeep is offering their customers the opportunity of handing over their vehicle (*) at the end of its life without
incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any expenses
as a result of it having a zero or negative market value. In particular, in almost all European Union countries, until 1st January
2007, vehicles registered after 1st July 2002 will be collected free of charge, whilst from 2007 collection will be free of charge
irrespective of the year of registration as long as the vehicle contains its basic components (in particular, the engine and
bodywork) and has no additional waste.
To hand your vehicle over at the end of its life without extra cost, go to one of our Dealerships or Jeep-authorised collection
and scrapping centres. These centres have been carefully chosen to offer high quality service for the collection, treatment and
recycling of vehicles at their end of life, respecting the surrounding environment. You can find further information on these
collection and scrapping centres either from a Jeep Dealership or by calling the freephone number 00 800 0 426 5337 or on
the Jeep website.
(*) Vehicle for transporting passengers with a maximum of nine seats and a total permitted weight of 3.5 t.
179
MULTIMEDIA
MULTIMEDIA
TIPS, CONTROLS AND GENERAL
This chapter describes the main INFORMATION................................181
functions of the infotainment systems UCONNECT 5"
for the Uconnect™ 5" Radio, or RADIO/UCONNECT 5" RADIO
Uconnect™ 5" Radio Nav or NAV ................................................183
Uconnect™ 6.5" Radio Nav that can UCONNECT 6.5" RADIO NAV .........194
be fitted on the vehicle.
180
TIPS, CONTROLS ❒ prevent any liquid from entering the The secret code is made up of four
AND GENERAL system: this could damage it beyond digits, from 0 to 9: to insert the first digit
INFORMATION repair. of the code, turn the BROWSE/ENTER
80) 81) right knob and press to confirm.
ROAD SAFETY
ANTI-THEFT After entering the fourth digit, the
Learn how to use the various system PROTECTION system begins operating.
functions before setting off. If an incorrect code is entered, the
Read the instructions for the system The system is equipped with an
system displays "Incorrect Code" to
carefully before setting off. anti-theft protection system based on
notify the user of the need to enter the
the exchange of information with the
182) 183) correct code.
electronic control unit (Body Computer)
RECEPTION CONDITIONS After the 3 available attempts to enter
on the vehicle.
the code, the system displays
Reception conditions change This guarantees maximum safety and
"Incorrect Code. Radio locked. Wait for
constantly while driving. Reception may prevents the secret code from being
30 minutes". Once the text has
be interfered with by the presence of entered after the power supply has
disappeared you can start the code
mountains, buildings or bridges, been disconnected.
entering procedure again.
especially when you are far away from If the check has a positive outcome, the
the broadcaster. system will start to operate, whereas if Vehicle radio passport
the comparison codes are not the (excluding versions equipped with
IMPORTANT The volume may be same or if the electronic control unit Uconnect 6.5" Radionav)
increased when receiving traffic alerts (Body Computer) is replaced, the This document certifies ownership of
and news. system will ask the user to enter the the system. The vehicle radio passport
CARE AND MAINTENANCE secret code according to the procedure shows the system model, serial number
described in the paragraph below. and secret code.
Observe the following precautions In the case of loss of the vehicle radio
to ensure the system is fully Entering the secret code
(excluding versions equipped with passport, contact the Jeep Dealership,
operational: Uconnect 6.5" Radionav) taking an ID document and the vehicle
❒ the display lens should not come into ownership documents.
When the system is switched on, if the
contact with pointed or rigid objects
code is requested, the display will IMPORTANT Keep the vehicle radio
which could damage its surface; use a
show "Please enter Anti-Theft Code" passport in a safe place so that you
soft, dry anti-static cloth to clean and
followed by the video page showing can give the information to the relevant
do not press.
a keypad to enter the secret code. authorities if the system is stolen.
❒ never use alcohol, petrols and
derivatives to clean the display lens.
181
IMPORTANT
MULTIMEDIA
In the event of a fault, the system must WARNING
only be checked and repaired by a
Jeep Dealership.
182) Follow the safety rules below;
If the temperature is particularly low, the otherwise serious injuries may occur to the
display may take a while to reach occupants or the system may be
optimum brightness. damaged.
If the vehicle is stopped for a while and 183) If the volume is too loud this can be
the external temperature is very high, dangerous. Adjust the volume so that
the system may go into “thermal you can still hear background noises (e.g.
horns, ambulances, police vehicles, etc.).
protection” mode, suspending
operation until the radio temperature
returns to acceptable levels.
Look at the screen only when it is WARNING
necessary and safe. If you need to look
at the screen for a long time, pull over 80) Only clean the front panel and the
to a safe place so as not to be display with a soft, clean, dry, anti-static
distracted while driving. cloth. Cleaning and polishing products
Immediately stop using the system in may damage the surface. Do not use
alcohol or similar products to clean the
the event of a fault. Otherwise the panel or the display.
system might be damaged. Contact a 81) Do not use the display as a base for
Jeep Dealership as soon as possible to supports with suction pads or adhesives
have the system repaired. for external navigators or smartphones
or similar devices.
182
Uconnect 5" Radio/Uconnect 5" Radio Nav
.
QUICK GUIDE
Controls on front panel
VOLUME TUNE
BROWSE
ENTER
SCR LL
O
159 J0A0600C
183
Front panel control summary table
MULTIMEDIA Button Functions Mode

1 – PHONE Phone data display Brief button press
Source selection: USB/iPod or AUX or

2 – MEDIA Brief button press
Bluetooth®
Access to the Radio mode, with the possibility
3 – RADIO of selecting among AM, FM or DAB (where Brief button press
provided)
4 – ON/OFF Display on/off Brief button press
5 – COMPASS Compass information display Brief button press
(Uconnect 5" Radio versions)
5 – NAV Access to the Navigation menu Brief button press
(Uconnect 5" Radio Nav versions)
Access to additional functions: display of time,
6 – MORE External temperature, Settings, Compass Brief button press
(where provided)
Scrolling the list or tuning to a radio station or Knob clockwise/anticlockwise turning
select previous/next track
7 – BROWSE ENTER
Confirmation of the option displayed Brief button press
8–
Exit the selection/return to previous screen Brief button press
9– Volume activation/deactivation (Mute/Pause)

Microphone activation/deactivation (in Phone Brief button press
mode)
Switching on Brief button press
10 – VOLUME
Switching off Brief button press
Volume adjustment Left/right rotation of knob
The system uses the "touch screen" function; to interact with the different functions, press the "graphic buttons" displayed. To
confirm the selection, press the button "OK". To go back to the previous screen, press the (Delete) button or, depending on
the activated screen, /Done.
184
STEERING WHEEL CONTROLS
The controls for the main system functions are present on the steering wheel fig. 160 to make control easier. The activation of
the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as described in
the table below.
160 J0A0004C
Steering wheel control summary table
Button Interaction
❒ Acceptance of incoming call

❒ Acceptance of the second incoming call and putting the active call on hold
❒ Activation of voice recognition for Phone function
❒ Interruption of the voice message in order to give a new voice command
❒ Interruption of voice recognition
❒ Activation of voice recognition

❒ Interruption of the voice message in order to give a new voice command
❒ Interruption of voice recognition
❒ Rejection of incoming call

❒ Ending of call in progress
185
Controls behind the steering wheel
MULTIMEDIA Buttons Interaction

Button A (steering wheel left side)
❒ Brief button press: search for next radio station or selection of USB/iPod
next track.
Upper button
❒ Long button press: scan of higher frequencies until released/fast forward
of USB/iPod track.
Central button With each press it scrolls through sources AM, FM, USB/iPod, AUX. Only the available
sources will be selected.
❒ Brief button press: search for previous radio station or selection of USB/
iPod next track.
Lower button
❒ Long button press: scan of lower frequencies until released/fast forward of
USB/iPod track.
Button B (steering wheel right side)
Increase volume
Upper button ❒ Brief button press: single volume increase
❒ Long button press: fast volume increase
Central button Activation/deactivation of Mute function
Decrease volume
Lower button ❒ Brief button press: single volume decrease
❒ Long button press: fast volume decrease
186
USB/iPod/AUX SUPPORT At the bottom: display of the following MEDIA MODE
Versions with Uconnect 5" Radio: buttons: With Media mode active, briefly press
the vehicle has a USB/AUX port located ❒ "Browse": list of the radio stations buttons / to play the
on the central tunnel. available; previous/next track or keep buttons
❒ "AM/FM", "AM/DAB", "FM/DAB": / pressed to fast rewind/
Versions with Uconnect 5" Radio
selection of the desired frequency band forward the track.
Nav: the vehicle has a USB/AUX port
(button reconfigurable according to Track selection (Browse)
located in the centre tunnel and a USB
the band selected: AM, FM or DAB); NOTE For languages not supported by
port located inside the front armrest.
❒ "Tune" : manual radio station tuning the system which feature special
RADIO MODE (not available for DAB radios); characters (e.g. Greek), the keyboard is
After the desired radio station is not available. In these cases this
❒ "Info": additional information on the
selected on the display (see fig. 161), function will be limited.
source being listened to;
the following information is shown: Bluetooth® SOURCE
❒ "Audio": access to the "Audio
setting" screen. Pairing an audio device Bluetooth®
Audio menu To pair a Bluetooth® audio device,
proceed as follows:
The following adjustments can be
❒ activate the Bluetooth® function on
carried out using the "Audio" menu: the device;
❒ "Equaliser" (where provided); ❒ Press the MEDIA button on the front
❒ "Balance/Fader" (left/right and panel;
front/rear sound balance adjustment); ❒ if the "Media" source is active, press
❒ "Volume/Speed" (excluding versions the "Source" button;
161 J0A2500C
with Hi-Fi system) speed-dependent ❒ select the Bluetooth® Media
At the top: the list of radio stations automatic volume adjustment; source;
stored (preset) is displayed; the station ❒ "Loudness" (where provided); ❒ press the "Add Device" button;
being listened to is highlighted. ❒ "Auto-On Radio" (selects the radio ❒ search for Uconnect™ on the Blue-
In the middle: display of the name of operation when the ignition device tooth® audio device (during the pairing
the current radio station and the is turned to MAR). stage a screen is displayed showing the
buttons ( / ) for selecting the progress of the operation);
previous or next radio station.
187
❒ when requested by the audio device, ❒ display and call contacts from the ❒ when prompted by the mobile
MULTIMEDIA
enter the PIN code shown on the registers of recent calls; phone, use its keyboard to enter the
system display or confirm on the device ❒ pair up to 10 phones/audio devices PIN code shown on the system display
the PIN displayed; to make access and connection easier or confirm on the mobile phone the
❒ if the pairing procedure is completed and quicker; PIN displayed;
successfully, a screen is displayed. ❒ transfer calls from the system to the ❒ from the "Phone" screen you can
Answer "Yes" to the question to pair the mobile phone and vice versa and always pair a mobile phone by pressing
Bluetooth® audio device as favourite deactivate the microphone audio for the "Settings" button: press the "Add
(the device will have priority over all private conversations. Device" button and proceed as
other devices that will be paired subse- NOTE The mobile phone audio is described above;
quently). If "No" is selected, the priority
transmitted through the vehicle’s audio ❒ during the pairing stage a screen is
is determined according to the order of
pairing. The last device connected will system; the system automatically displayed showing the progress of
have the highest priority; mutes the system audio when the the operation;
❒ an audio device can also be paired Phone function is used. ❒ when the pairing procedure is
by pressing the PHONE button Pairing a mobile phone completed successfully, a screen is
on the front panel and by selecting displayed: answer "Yes" to the question
Proceed as follows: to pair the mobile phone as favourite
"Settings" or, from the "Settings" menu,
selecting "Phone/Bluetooth". ❒ activate the Bluetooth® function on (the mobile phone will have priority over
the mobile phone; all other mobile phones that will be
IMPORTANT If the Bluetooth® pairing ❒ press the PHONE button on the paired subsequently). If no other
between mobile phone and system is front panel; devices are paired, the system will
lost, consult the mobile phone owner's ❒ if no phone is paired with the system consider the first associated device as
handbook. yet, the display shows a dedicated favourite.
PHONE MODE screen;
Making a phone call
Phone mode activation: press the ❒ select "Yes" to start the pairing
procedure, then search for the Proceed as follows:
PHONE button on the front panel.
The buttons on the display can be used Uconnect™ device on the mobile ❒ selecting the icon (mobile
to: phone (if "No" is selected, the Phone phone phonebook);
❒ compose the phone number (using main screen is displayed); ❒ selecting "Recent Calls";
the graphic keypad on the display); ❒ selecting the icon (graphic
❒ display and call the contacts on the keyboard);
mobile phone phonebook; ❒ pressing the "Redial" button.
188
NOTE The operations described above ❒ Safety/Assistance (where provided); The options available are:
can only be accessed if supported by ❒ Lights (where provided); ❒ "Off": the system is deactivated;
the mobile phone in use. ❒ Doors & Locks; ❒ "Only warning": the system
SMS message reader ❒ Engine Off Options; intervenes only by providing the driver
❒ Audio; with an acoustic warning (where
The system can read the messages
provided);
received by the mobile phone. To use ❒ Phone/Bluetooth;
this function the mobile phone must ❒ "Only active braking": the system
❒ SiriusXM Setup (where provided);
support the SMS exchange function intervenes by activating automatic
❒ Radio Setup; braking (where provided);
through Bluetooth®.
If this function is not supported by the ❒ Restore settings ❒ "Warning + active braking": the
phone, the corresponding button is Safety/Assistance system intervenes by providing the
deactivated (greyed out). (where provided) driver with an acoustic warning and
When a text message is received, the activating automatic braking.
This function can be used to carry out
display will show a screen where the the following adjustments: Forward Collision Sensitivity
options "Listen", "Call" or "Ignore" can (where provided)
be selected. ParkView Camera
Press the button to access the list (where provided) This function can be used to select the
of SMS messages received by the "readiness" of the system to intervene,
This function can be used to carry out
mobile phone (the list displays a on the basis of distance from the
the following adjustments:
maximum of 60 messages received). obstacle.
❒ "Active Guidelines" (where provided): The options available are "Near",
SETTINGS permits the activation of dynamic grids "Med", "Far".
that indicate the trajectory of the vehicle
Press the +MORE button on the front
on the display. ParkSense
panel to display the main "Settings" (where provided)
menu. ❒ "ParkView cam.delay" (where
NOTE The menu items displayed vary provided): permits a delay in the This function can be used to select the
according to the versions. disappearance of images from the type of warning provided by the
The menu includes the following items: camera when reverse is disengaged. ParkSense system.
The options available are:
❒ Display; Forward Collision Warning
(where provided) ❒ "Sound Only": the system warns the
❒ Units;
driver that an obstacle is present
❒ Voice commands; This function can be used to select the through acoustic warnings only, via the
❒ Clock & Date; Forward Collision Warning system speakers in the vehicle.
intervention method.
189
❒ "Sound & Display": the system warns LaneSense Strength Blind Spot Alert
MULTIMEDIA
the driver that an obstacle is present (where provided) (where provided)
through acoustic (via the speakers This function can be used to select the This function can be used to select the
in the vehicle) and visual (on the force to apply to the steering wheel type of warning ("Sound Only" or
instrument panel) warnings. to put the vehicle back in the lane "Sound & Display") to indicate the
Front ParkSense Vol. through the electric steering system, in presence of objects in the blind spot of
(where provided) the event of LaneSense system the door mirror.
intervention.
This function can be used to select the Rain sensor
volume of the acoustic warnings SideSense (where provided)
provided by the front Parksense (where provided) This function can be used to activate/
system. This function can be used to select the deactivate the automatic operation
Rear ParkSense Vol. Side Distance Warning system warning of the wipers in the event of rain.
(where provided) type.
Brakes
The options available are: (where provided)
This function can be used to select the
volume of the acoustic warnings ❒ "Off": the system is deactivated;
This function can be used to select the
provided by the rear Parksense system. ❒ "Sound Only": the system warns the following submenus:
driver that an obstacle is present
ParkSense Vol. ❒ "Brake Service" (where provided):
through acoustic warnings only, via the
(where provided) permits the activation of the procedure
speakers in the vehicle.
This function can be used to select the to carry out braking system servicing;
❒ "Sound & Display": the system warns
volume of the acoustic warnings ❒ "Auto Park Brake" (where provided):
the driver that an obstacle is present
provided by the Parksense system. permits the activation/deactivation of
through acoustic (via the speakers
automatic parking brake engagement.
LaneSense Warning in the vehicle) and visual (on the
(where provided) instrument panel) warnings. NAVIGATION
(Uconnect 5" Radio Nav versions only)
This function can be used to select the SideSense Intensity
"readiness" of the LaneSense system to (where provided) Programming a route
intervene. This function can be used to select the IMPORTANT In the interest of safety
Side Distance Warning system acoustic and to reduce distractions while you are
warning volume. driving, you should always plan a route
before you start driving.
190
To plan a route, do the following: MAP UPDATE ❒ ensure that the map you wish to
❒ tap the screen to open the Main (Uconnect 5" Radio Nav versions only) update is active in the navigation
menu; The map can be updated in two system. If the navigation system has
❒ select "Navigate to" or "Drive to"; different ways: several maps and you wish to update a
❒ most recent maps guarantee: if a map which is not currently active,
❒ select "Address": you can change the
new map is available for your system activate the map. To do this, select
country or state setting by tapping the
within 90 day of initial use, it can be "Change map" in the "Settings" menu
flag before you select a city;
downloaded once free of charge. of the navigation application;
❒ enter the town or city name, or the
❒ map update: it is possible to ❒ select "Navigation updates" in the
postcode. Towns with similar names
purchase a new version of the map "Settings" menu. You are asked
are shown in the list while you type;
installed on your system. whether you wish to prepare a USB
Tip: tap the arrow to the right of the list
device for downloading updates;
to expand the list of suggested towns. Preparing a USB device
When the correct city or town appears ❒ select "Yes";
in the list, tap the name to select the To update the map, a USB device that ❒ insert the USB device.
destination. meets the following requirements must The system starts to prepare the USB
be used: device.
❒ enter the street name. Streets with
similar names are shown in the list while ❒ ideally, the USB device should be When the USB device is ready, the
you type. When the correct street empty; display shows a dedicated message.
name appears in the list, tap the name ❒ the USB device must have at least Remove the USB device and connect it
to select the destination; 8 GB of memory free; to the computer. The new map can
now be downloaded to the USB
❒ enter the house number, then tap ❒ the USB must use a FAT-32 file
device.
"Done"; system;
❒ the location is shown on the map. ❒ the USB device must not be blocked TomTom HOME installation
Tap "Select" to continue or tap "Back" and must allow files to be saved. To install TomTom HOME and create
to enter another address; NOTE The use of a memory stick is a MyTomTom account, proceed as
❒ when the new route is shown, tap recommended, while the use of mass follows:
storage devices, such as mobile
"Done". For more information about the ❒ download and install the TomTom
route, tap "Details". To change your phones or multimedia players, is not
HOME application on the computer. On
route, for example, to travel via a recommended.
the computer, access
particular location or to select a new To prepare a USB device, proceed as
www.tomtom.com/getstarted. Select
destination, tap "Change route". You follows:
"Download TomTom HOME", then
are guided to your destination, using follow the instructions provided.
spoken instructions and on-screen
directions.
191
❒ connect the prepared USB device to Downloading a map
MULTIMEDIA
Proceed as follows:
the computer: TomTom HOME is If a map update is available for the ❒ insert the USB device containing the
launched automatically. system, this update is included in the new map in the Uconnect™ system.
❒ select "Enter" in the top right corner list of updates available. The system detects a new map on
of TomTom HOME; NOTE If the most recent map is already the USB device;
❒ select "Create account" and enter the installed on the system, the update is ❒ select "Start": the system starts
required details to create a MyTomTom not proposed. updating the map.
account. A MyTomTom account is Select the map that you wish to NOTE Do not remove the USB device
required to receive map updates. download, then select "Update and and do not disconnect the system’s
After the account is created, you are install". The map is downloaded and power supply before the update is
asked whether you wish to connect the copied to the USB device. complete. The system cannot be used
Uconnect™ system to your account. Select "Done" when the process is until the update is completed correctly.
The USB device prepared represents complete. If the system update is interrupted, start
the Uconnect™ system. NOTE Don’t disconnect the USB device it again.
❒ select "Connect device", then select from the computer while map Once the map has been updated, the
"Close". downloading and copying is in display shows a dedicated message:
A map can now be downloaded to the progress. select "Close". The new map is now
USB device. The map can now be installed on the available on the system.
system.
Download the map Troubleshooting
Installing the map
To check whether you are entitled to The following problems may occur
download a free map update using the NOTES during the update:
Most Recent Maps Guarantee, select ❒ The update must be carried out ❒ the map on the USB device is not
"Tools", "Use most recent maps with engine on and might last more valid. In this case, download the map to
guarantee" in TomTom HOME. than 30 minutes. the USB device again, using TomTom
To purchase a map update, select ❒ Never remove the USB stick in HOME. It may be necessary to prepare
"Purchase maps" in TomTom HOME. order not do jeopardize the map the USB device again;
If an update has already been update. ❒ the version of the map on the USB
purchased, select "Update device" in After downloading a map to the USB device is the same as or is a previous
TomTom HOME. device, it can be installed on the version of the one already on the
system. system. If this occurs, download the
map to the USB device again, using
TomTom HOME. It may be necessary to
prepare the USB device again.
192
VOICE COMMANDS Radio functions Navigation functions
(only versions with Uconnect 5" Radio
NOTE For languages not supported by The button activates the following Nav and Uconnect 6.5" Radio Nav)
the system, voice commands are not functions:
The button activates the following
available. ❒ Tune to XXX-FM
To use the voice commands, press the functions:
❒ Tune to XXX AM
button ("Voice" button) or ❒ Drive Home
❒ Tune to Radio XXX
("Phone" button) on the controls of ❒ 2D view
the steering wheel and give the ❒ Tune to DAB channel
❒ 3D view
command you want to activate, out Media Functions ❒ Clear route
loud.
The button activates the following ❒ Add Favourite
Phone functions functions: ❒ Repeat instruction
The button activates the following ❒ Play song...
functions: ❒ Play album…
❒ Call ❒ Play artist…
❒ Dial ❒ Play genre…
❒ Redial ❒ Play playlist…
❒ Call back ❒ Play podcast…
❒ Last calls ❒ Play audiobook…
❒ Outgoing calls ❒ Play track number…
❒ Missed calls ❒ Select the media
❒ Incoming calls ❒ Display
❒ Phonebook
❒ Search
❒ Show SMS
193
UConnect 6.5" Radio Nav
MULTIMEDIA
.
QUICK GUIDE
Controls on front panel
162 J0A0003C
194
Front panel control summary table
Button Functions Mode

Switching on Brief button press
1–
Switching off Brief button press
Volume adjustment Left/right rotation of knob
2–
Volume activation/deactivation (Mute/Pause) Brief button press
3–
Display on/off Brief button press
4–
Access to the Vehicle Settings menu Brief button press
5–
Exit the selection/return to previous screen Brief button press
Scrolling the list or tuning to a radio station Left/right rotation of knob

6 – BROWSE ENTER
Confirmation of the option displayed Brief button press
Access to the additional functions: display of
7 – MORE Time, Compass, Outside temperature, Media Brief button press
Player
8 – PHONE Phone data display Brief button press
9 – NAV Access to the Navigation menu Brief button press
10 – MEDIA Source selection Brief button press
11 – RADIO Access to the Radio mode Brief button press
The system uses the "touch screen" function; to interact with the different functions, press the "graphic buttons" displayed. To
confirm the selection, press the button "OK". To go back to the previous screen, press the (Delete) button or, depending on
the activated screen, /Done.
195
STEERING WHEEL In the central part: displaying of the ❒ "Auto-On Radio" (selects the radio
MULTIMEDIA
CONTROLS radio station being listened to and operation when the ignition device
For the operation of the controls on the "AM/FM", "AM/DAB", "FM/DAB" is turned to MAR).
steering wheel see paragraph Uconnect buttons: selection of the desired MEDIA MODE
5" Radio/Uconnect 5" Radio Nav. frequency band (button reconfigurable
according to the band selected: AM, With Media mode active, briefly press
USB/iPod/AUX SUPPORT buttons / to play the
FM or DAB);
The vehicle has a USB/AUX port At the bottom: display of the following previous/next track or keep buttons
located in the centre tunnel and a USB buttons: / pressed to fast rewind/
port located inside the front armrest. forward the track.
❒ "browse": list of the radio stations
RADIO MODE available; Bluetooth® SOURCE
After the desired radio station is ❒ / select previous/following Pairing an audio device Bluetooth®
selected on the display (see fig. 163), radio station; Proceed as follows:
the following information is shown: ❒ "tune" : manual radio station tuning ❒ activate the Bluetooth® function on
(not available for DAB radios); the device;
❒ "Audio": access to the "Audio ❒ Press the MEDIA button on the front
setting" screen. panel;
❒ if the "Media" source is active, press
Audio menu
the "Source" button;
The following adjustments can be ❒ select the Bluetooth® Media
carried out using the "Audio" menu: source;
❒ "Balance/Fader" (left/right and ❒ press the "Add Device" button;
front/rear sound balance adjustment); ❒ search for Uconnect™ on the Blue-
163 J0A2501C
❒ "Equaliser" (where provided); tooth® audio device (during the pairing
At the top: display of the stored radio ❒ "Volume/Speed" (excluding versions stage a screen is displayed showing the
station (preset) list. The station being with Hi-Fi system) speed-dependent progress of the operation);
listened to is highlighted. automatic volume adjustment; ❒ when requested by the audio device,
enter the PIN code shown on the
❒ "Surround Sound" (where provided);
system display or confirm on the device
❒ "AUX Volume comp."; the PIN displayed;
❒ "Loudness" (where provided);
196
❒ if the pairing procedure is completed ❒ pair up to 10 phones/audio devices ❒ from the "Phone" screen you can
successfully, a screen is displayed. to make access and connection easier always pair a mobile phone by pressing
Answer "Yes" to the question to pair the and quicker; the "Settings" button: press the "Add
Bluetooth® audio device as favourite ❒ transfer calls from the system to the Device" button and proceed as
(the device will have priority over all mobile phone and vice versa and described above;
other devices that will be paired subse- deactivate the microphone audio for ❒ during the pairing stage a screen is
quently). If "No" is selected, the priority
private conversations. displayed showing the progress of
is determined according to the order of
pairing. The last device connected will NOTE The mobile phone audio is the operation;
have the highest priority; transmitted through the vehicle’s audio ❒ when the pairing procedure is
❒ an audio device can also be paired system; the system automatically completed successfully, a screen is
by pressing the MORE button on the mutes the system audio when the displayed: answer "Yes" to the question
front panel and then selecting the Phone function is used. to pair the mobile phone as favourite
options "Settings" and "Bluetooth", or Pairing a mobile phone (the mobile phone will have priority over
pressing the MEDIA button on the front all other mobile phones that will be
Proceed as follows: paired subsequently). If no other
panel and then selecting "Media" and
"Bluetooth". ❒ activate the Bluetooth® function on devices are paired, the system will
the mobile phone; consider the first associated device as
IMPORTANT If the Bluetooth® pairing ❒ press the PHONE button on the front favourite.
between mobile phone and system is panel;
lost, consult the mobile phone owner's Making a phone call
❒ if no phone is paired with the system
handbook. yet, the display shows a dedicated Proceed as follows:
PHONE MODE screen; ❒ selecting the icon (mobile
Phone mode activation: press the ❒ select "Yes" to start the pairing phone phonebook);
PHONE button on the front panel. procedure, then search for the ❒ selecting "Recent Calls";
The buttons on the display can be used Uconnect™ device on the mobile ❒ selecting the icon (graphic
to: phone (if "No" is selected, the Phone keyboard);
❒ compose the phone number (using main screen is displayed); ❒ pressing the "Redial" button.
the graphic keypad on the display); ❒ when prompted by the mobile NOTE The operations described above
❒ display and call the contacts on the phone, use its keyboard to enter the can only be accessed if supported by
mobile phone phonebook; PIN code shown on the system display the mobile phone in use.
or confirm on the mobile phone the
❒ display and call contacts from the
PIN displayed;
registers of recent calls;
197
SMS message reader ❒ Vehicle shutdown options; Forward Collision Warning
MULTIMEDIA
❒ Audio; (where provided)
The system can read the messages
received by the mobile phone. To use ❒ Phone/Bluetooth; Allows you to select the intervention
this function the mobile phone must ❒ Sirius XM configuration (where mode for the Forward Collision Warning
support the SMS exchange function available); system. The options available are:
through Bluetooth®. ❒ Radio Setup; ❒ "Off": the system is deactivated;
If this function is not supported by the ❒ "Only warning": the system
phone, the corresponding button is ❒ System Information;
intervenes only by providing the driver
deactivated (greyed out). ❒ Restore defaults;
with a warning (option available for
When a text message is received, the ❒ Clear Personal Data. versions/markets, where provided);
display will show a screen where the
Safety & Driving Assistance ❒ "Only active braking": the system
options "Listen", "Call" or "Ignore" can
intervenes by activating automatic
be selected. This function can be used to carry
braking (option available for
Press the button to access the list out the following adjustments:
versions/markets, where provided);
of SMS messages received by the ParkView camera
mobile phone (the list displays a ❒ "Alarm + active braking": the system
(where provided)
maximum of 60 messages received). intervenes by providing the driver with
Allows you to activate the display of the a warning and activating automatic
SETTINGS shooting of the ParkView camera when braking;
Press the +MORE button on the front the reverse gear is engaged.
Forward Collision Sensitivity
panel to display the main "Settings" (where provided)
Delayed ParkView deactivation
menu. (where provided)
NOTE The menu items displayed vary Allows you to select the intervention
according to the versions. Allows you to delay the switching off of readiness for the system according to
The menu includes the following items: the shooting of the ParkView camera the distance of the obstacle. The
when the reverse gear is disengaged. options available are "Near", "Med",
❒ Display;
"Far".
❒ Units; Guidelines for load platform camera
(where provided) ParkSense
❒ Voice commands;
Allows you to activate the display of the (where provided)
❒ Clock & Date;
dynamic guidelines that indicate the Allows you to select the type of warning
❒ Safety & Driving Assistance; route of the vehicle. provided by the ParkSense system.
❒ Lights; The options available are:
❒ Doors & Locks;
198
❒ "Audio Only": the system warns the SideSense Brakes
driver that an obstacle is present (where provided)
This option can be used to select the
through acoustic warnings only, via the Allows you to select the type of warning following submenus:
speakers in the vehicle; provided by the Side Distance Warning
❒ "Brake Service" (for versions/
❒ "Audio and visual": the system system.
markets, where provided): permits the
warns the driver that an obstacle is The options available are:
activation of the procedure to carry
present through acoustic (via the ❒ "Off": the system is off; out braking system servicing;
speakers in the vehicle) and visual (on ❒ "Audio Only": the system warns the
the instrument panel) warnings. ❒ "Auto Park Brake" (for versions/
driver that an obstacle is present markets, where provided): permits the
Front ParkSense Vol. through acoustic warnings only, via the activation/deactivation of automatic
(where provided) speakers in the vehicle; parking brake engagement.
Allows you to select the volume of the ❒ "Audio and visual": the system
NAVIGATION MODE
acoustic warnings for the front warns the driver that an obstacle is
ParkSense system. present through acoustic (via the IMPORTANT Navigation maps are
speakers in the vehicle) and visual (on pre-loaded on the system, therefore no
Rear ParkSense Vol. the instrument panel) warnings. external support is needed.
(where provided) To activate the main navigation menu,
Allows you to select the volume of the SideSense Volume press the NAV button on the front
(where provided)
acoustic warnings for the rear panel, then press one of the following
ParkSense system. Allows you to select the volume of the buttons:
acoustic warnings for the front Side ❒ "Where to?": it searches or
LaneSense Warning Distance Warning system.
(where provided) navigates to the destination;
Rain sensor ❒ "View map": it displays the map;
Allows you to select the intervention
(where provided) ❒ "Info" : it displays all info about
readiness for the LaneSense system.
Allows you to activate/deactivate the navigation;
LaneSense Strength automatic switching on of the wipers in ❒ "Emergency": it searches for
(where provided)
the case of rain. Hospitals or Police Stations located
Allows you to select the force to apply near the destination. It is also possible
to the steering wheel to put the vehicle to view your current position on the
back in the lane through the electric display and save, in "Favourites", the
steering system, in the event of location of the Hospitals or Police
LaneSense system intervention. Stations.
199
View Map Information
MULTIMEDIA
VOICE COMMANDS
Press the "View Map" button in the Press the "Information" button in the For the functions controlled with voice
main Navigation Menu to display the main Navigation Menu to select from commands see paragraph Uconnect 5"
map relative to the current position. the following information: Radio/Uconnect 5" Radio Nav.
When the display shows the map, the ❒ Traffic
following options are available: ❒ Where Am I?
❒ "Menu": press this button to return to ❒ Trip Computer
the main Navigation Menu;
❒ "+/–": press the "+" or " –" button to Emergency
change the dimension of the map (it Press the "Emergency" button in the
is not possible to zoom in on minor main Navigation Menu to select one of
roads); the following options for searching
❒ "Time of Arrival/Time to Destination/ for and navigating towards a
Distance" (only during navigation): press destination:
this button at the top right of the ❒ "Hospital": press this button to set a
display to view one of the following trip to a hospital near the destination;
options: "Time of Arrival", "Time to ❒ "Police": press this button to set
Destination", "Distance". a trip to a police station near the
❒ "Turn List" (only during navigation): destination.
press the list of turns along the route at
the middle of the top of the display.
Select a turn through the following
options: "Show on Map" or "Avoid
Street".
❒ "Options": press this button to
display the map display options.
200
IMPORTANT INFORMATION AND RECOMMENDATIONS
WARNING
MySky SUN ROOF

❒ While refitting the panels, pay special attention to prevent any trapping of fingers, scarves, ties and loose clothing; they might be trapped
under the panels themselves.
ROOF RACK/SKI RACK
❒ Before driving, make sure that the transversal bars have been fitted properly.
SUGGESTIONS FOR DRIVING
❒ If the engine stalls, the vehicle skids or it is not possible to drive in a straight line on the top of a hill or a road with a gradient, do not try to
do a U-turn for any reason. This operation would result in the vehicle rolling over. Back up on the stretch of road with a gradient, shifting to
reverse and proceeding with the utmost care. Do not travel downhill with gearbox in neutral and using only the brake.
❒ The presence of abrasive material on the brakes may cause excessive wear or adversely affect its correct operation. If the vehicle is driven
in particularly dusty environments, have the brakes checked and cleaned as necessary.
INTERIORS
❒ Never use flammable products, such as petrol ether or rectified petrol to clean the inside of the vehicle. The electrostatic charges which are
generated by rubbing during the cleaning operation may cause a fire.
❒ Do not keep aerosol cans in the vehicle: danger of explosion. Aerosol cans must not be exposed to a temperature exceeding 50°C. When
the vehicle is exposed to sunlight, the internal temperature can greatly exceed this value.
❒ There must be no obstacles on the floor underneath the pedals; make sure that mats are always flat and do not interfere with the pedals.
SUPPLY
❒ Modifications or repairs to the supply system that are not carried out correctly or do not take the system technical specifications into
account can cause malfunctions leading to the risk of fire.
WARNING
ROOF RACK/SKI RACK

❒ The use of transversal bars on longitudinal ones prevents the use of the sunroof, because the latter, while opening, interferes with the bars.
❒ Therefore do not move the sunroof if transversal bars have been fitted.
❒ Fully comply with the regulations in force concerning maximum clearance.
INTERIORS
❒ Never use alcohol, petrols and derivatives to clean the dashboard and instrument panel lens.
NOTES
INDEX Display ........................................... 40 Identification data .......................... 166
Doors............................................. 11 Ignition device ................................ 8
4WD LOW mode DST (system).................................. 65 Important information and
(engagement/release)................... 110
DTC (system) ................................. 64 recommendations ........................ 201
ABS (system) ................................ 64 Interior lights .................................. 21
Active safety systems..................... 64 Electric Parking Brake (EPB) ......... 100
Airbag ............................................
91 Electric steering wheel heating ....... 17 Jump starting................................ 141
Alarm .............................................
11 Electric sun roof ............................. 29 Keys
All-wheel drive................................ 109 Electric windows ............................ 28 – electronic key ............................ 7
Automatic transmission gear Electronic Cruise Control................ 108 – key with remote control ............. 7
lever unlocking ............................. 143 Engine compartment...................... 155
Automatic transmission.................. 103 Engine............................................ 167
Lane Change ................................ 20
LaneSense system......................... 114
Auxiliary driving systems................. 69 ERM (system)................................. 65
Lifting the vehicle ........................... 163
Battery recharging ........................ 160 ESC (system) ................................. 64
Light switch.................................... 19
Bodywork (cleaning and Exterior lights ................................. 19
maintenance) ............................... 164 Luggage compartment................... 34
Fluids and lubricants ..................... 176
Bonnet........................................... 33 Fog lights ....................................... 19 Main beam headlights .................. 20
Broken-down vehicle towing .......... 146 Forward Collision Warning Plus Main beam headlights
BSM system .................................. 69 system ......................................... 71 – Automatic main beam
Front airbags.................................. 91 headlights ................................. 20
Changing a wheel ......................... 135
Front courtesy lights....................... 21 Manual gearbox ............................. 103
Child protection systems................ 81
Fuel consumption .......................... 178 MySky sun roof .............................. 31
Climate control............................... 24
CO2 emissions............................... 179 Fuel cut-off system......................... 143 Occupant protection systems ....... 76
Control panel and on-board Fuse boxes .................................... 130
instruments .................................. 38
Parking lights ................................ 20
Fuses (replacement) ....................... 130
ParkSense (system)........................ 112
Daytime running lights (DRL) ......... 19 Hazard warning lights ................... 124 PBA (system) ................................. 64
Dimensions .................................... 171 HDC (system)................................. 65 Performance (top speed)................ 178
Dipped beam headlights ................ 19 Headlight alignment adjustment ..... 20 Prescriptions for handling the
Direction indicators ........................ 20 Head restraints............................... 16 vehicle at the end of its life ........... 179
Disabling active safety systems ...... 66 HSA (system) ................................. 64 Pretensioners ................................. 79
Rear camera (ParkView® rear TireKit ............................................ 139
INDEX
backup camera)........................... 115 Towing the vehicle.......................... 145
Rear view mirrors ........................... 18 Towing trailers ................................ 117
Rear window wiper TPMS............................................. 73
– blade replacement..................... 161 TSC (system) ................................. 65
Refuelling the vehicle...................... 120
Replacing a bulb ............................ 124 Uconnect 5 Radio/Uconnect 5
Radio Nav.................................... 183
SBR (Seat Belt Reminder) UConnect 6.5 Radio Nav ............... 194
system......................................... 77
Use of the Owner Handbook.......... 4
Scheduled servicing ....................... 148
Seat belts....................................... 76 Warning lights and messages....... 43
Seats ............................................. 14 Weights.......................................... 174
Selec-Terrain (device) ..................... 111 Wheels and tyres ........................... 163
Sentry Key (system) ....................... 10 Wheels........................................... 169
Servicing procedures ..................... 161 Windscreen/rear window wiper ...... 22
Side bags....................................... 95 Windscreen wiper
Snow chains .................................. 170 – replacing wiper blades............... 161
Speed Limiter................................. 107
Starting the engine ......................... 99
Steering lock .................................. 9
Steering wheel ............................... 17
Stop/Start system .......................... 106
Supplementary Restraint System
(SRS) - Airbag .............................. 91
Supplies......................................... 175
Symbols......................................... 3
TC (system)................................... 64
The keys ........................................ 7 Chrysler Group LLC
603.99.641
Tips, controls and general
information................................... 181 1 Edition
Printed in Europe
WHY CHOOSING
GENUINE SPARE PARTS
We really know the vehicle because we invented, designed and produced it:
we know every minor detail of it. At the Jeep authorised workshops you will find technicians
directly trained by us, providing quality and professionalism needed for all service operations.
Jeep workshops are always close to you for the regular servicing operations,
season checks and practical recommendations by our experts.
This Owner Handbook is intended to show the vehicle's operating conditions.
For the enthusiast user who wants to have insights, curiosities and detailed information about the characteristics and functions With genuine parts your new vehicle will maintain long-term reliability,
of the vehicle, Jeep gives the opportunity to consult a dedicated section which is available in electronic format. comfort and performance: this is why you bought it.
We recommend to always ask for genuine spare parts for the components used on our vehicles,
ONLINE VEHICLE OWNER HANDBOOK because they originate from our steady commitment in research and development
of highly innovative technologies.
The following symbol is reported within the text of the Owner Handbook, next to the subjects for which details are provided.
For these reasons it is advisable to use genuine spare parts,
Go to the www.mopar.eu/owner website and access your personal area.
because they are the ones specifically designed for your vehicle.
The “Maintenance and care” page includes all the information about your vehicle and the link to access eLUM, where you will find
all the details of the Owner Handbook.
The eLUM website is free and will allow you, among many other things, to easily consult the on-board documents
of all the other vehicles of the Group.
Have a nice reading and happy motoring!
ENGLISH
OWNER HANDBOOK

Jeep Renegade Manual

Uploaded by

Copyright:

Available Formats

Jeep Renegade Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Jeep Renegade Manual

Uploaded by

Copyright:

Available Formats

COP RENEGADE GB LUM 10/09/14 08:50 Pagina 1

STARTING THE ENGINE

PARKING ON FLAMMABLE MATERIAL

RESPECTING THE ENVIRONMENT

ROLL OVER WARNING

GETTING TO KNOW YOUR CAR

VERSIONS WITH To activate the ignition device the

The ignition device can enter the

GETTING TO KNOW YOUR CAR

Manual locking/unlocking: use

GETTING TO KNOW YOUR CAR

The Passive Entry system can identify

GETTING TO KNOW YOUR CAR

IMPORTANT Carry out the adjustment

IMPORTANT To preserve the battery

GETTING TO KNOW YOUR CAR

11) Any adjustment must be performed

moving lever A to position 2.

IMPORTANT If this function is activated

GETTING TO KNOW YOUR CAR

GETTING TO KNOW YOUR CAR

GETTING TO KNOW YOUR CAR

GETTING TO KNOW YOUR CAR 2) .

MANUAL CLIMATE CONTROL SYSTEM

A - fan activation/adjustment knob:

Additional heater Note The power of the electric heater is

GETTING TO KNOW YOUR CAR

A - driver side temperature adjustment knob;

GETTING TO KNOW YOUR CAR

interrupt the blind movement.

GETTING TO KNOW YOUR CAR

GETTING TO KNOW YOUR CAR

❒ remove protective cap A fig. 39 on

IMPORTANT Always check that the

23) Wrong positioning of the bonnet stay

GETTING TO KNOW YOUR CAR

❒ take the screwdriver provided and

COMPARTMENT to the area underneath the luggage

control; compartment grab device A fig. 46 and

GETTING TO KNOW YOUR CAR

13) The dimensions of the platform permit

KNOWING THE INSTRUMENT PANEL

VERSIONS WITH MULTIFUNCTION DISPLAY

KNOWING THE INSTRUMENT PANEL

❒ Upper area of the display (A):

KNOWING THE INSTRUMENT PANEL

WARNING LIGHTS ON INSTRUMENT PANEL

Warning light What it means

INSUFFICIENT BRAKE FLUID / ELECTRIC PARKING BRAKE ON

Electric parking brake on

POWER STEERING FAILURE

SEAT BELTS NOT FASTENED

ENGINE COOLANT TEMPERATURE TOO HIGH

Warning light What it means

Tyre pressure low

ESC system failure

Hill Start Assist failure

PARTIAL / TOTAL DEACTIVATION OF ACTIVE SAFETY SYSTEMS

REAR FOG LIGHT