330kVA / 264 kW

POWERED by CUMMINS

APD330C

   

STANDARD DIESEL GENERATING SET

400/230 V-50 HZ 3 Phase MODEL APD 330C

KVA 330
Standby
Power KW 264
Pf. 0.8 KVA 300
Prime
KW 240
Standby : Continuous running at variable load for duration of an emergency. No overload is permitted on these ratings. In accordance with ISO 3046 .   
Prime : Continuous running at variable load for unlimited periods with 10% overload available for 1 hour in any 12 hour period. In accordance with ISO 8528,ISO 3046. 

High quality, reliable and complete power unit  

Compact design
Easy start and maintenance possibility
Every generating set is subject to a comprehensive test program which includes full load testing, checking and
provision of all control and safety shut down functions testing
 
Fully engineered with a wide range of options and accessories: Canopy, sound proof canopy and on-road trailer
 

   

   

     

 
OHSAS-18001 - Occupational Health & Safety

ISO-14001 - Environmental management

ISO-9001 - Quality management

BS-5000 - British Standard of rotating equipments

BS-4999 - British Standard of electrical equipments

ICE-60034 - Interactive Connectivity Establishment (Rotating Electrical Machine)

CE - Complete List of all Standards (European) 

 
   

ENGINE
CUMMINS
Model NTA855G1A
Engine Power Output kWm 291
at rated rpm HP 390
Aspiration and Cooling Turbocharged & Aftercooled
Total Displacement Litre 14
No. of Cylinders and Build 6 -Inline
Engine Speed rpm 1500
Bore and Stroke mmxmm 140x152
Compression Ratio 14.5:1
Governor Electronic
Fuel Consumption at full load L/hr 61
Fuel Tank Capacity Litre Open: 526/Canopy: 526
Oil Capacity Litre 38.6
Coolant Capacity Litre 60.6
Radiator Cooling Air m³/min 456
Air Intake - Engine m³/min 21.18
Exhaust Gas Flow m³/min 49.56

Heavy duty Cummins diesel engine Cooling radiator and fan

Four stroke, water cooled, turbocharged Starter battery (with lead acid) including Rack and Cables
Flexible fuel connection hoses and manual oil sump drain
Direct injection fuel system valve
Electronic Governor system Industrial capacity exhaust silencer and steel bellows
12/24 V D.C. starter and charge alternator Jacket water heater(at automatic models)
Replaceable fuel filter, oil filter and dry element air filter Operation manuals and circuit diagram documents
 

ALTERNATOR

STANDFORD
Model UCI444D
Design Brushless single bearing, revolving field
Stator 2/3 pitch
Rotor Single bearing, flexible disc
Insulation System Class H
Standard Temperature Rise 125 -163°C Continuous
Exciter Type Self Excited
Phase Rotation A (U), B (V), C (W)
Alternator Cooling Direct drive centrifugal blower fan
No load < 1.5%. Non distorting balanced
AC Waveform Total Harmonic Distortion
linear load < 5%
Telephone Influence Factor (TIF) <50 per NEMA MG1-22.43
Telephone Harmonic Factor (THF) <2%

Brushless, single bearing system, flexible disc, 4 poles Impregnation with tropicalised epoxy varnish
Insulation class H Solid state Automatic Voltage Regulator
Standard degree of protection IP21 (*IP22/IP23 is Stator winding with 2/3 pitch for improved
availab.) harmonics
Self-exciting and self-regulating
 

 
 CONTROL SYSTEM
Control supervision and protection panel is mounted on the genset base
Frame. The control panel is equipped as follows:

1. Auto Mains Failure Control Panel

Panel equipments:
Control with AMF module
Static battery charger DSE 7320
Emergency stop push button
c) Alarms:
a) Generating set control module DSE 7320 features: Over and Under Speed
The module is used to monitor a mains supply and starts and Low and High Battery Volt.
starts and stops a standby generating set Start and Stop Failure
Micro-processor based design Charge fail
Automatic control of mains and generator contactors Over Current
Monitors engine performance and AC power output Under / Over Generator Voltage
LED alarm indication Low Oil Pressure
Front panel conguration of timers and alarm trip points Emergency stop
Easy push button control High engine temperature
STOP/RESET -MANUAL –TEST-AUTO –MUTE ALARM –START kW overload
Unbalanced load
b) Metering via LED display: Independent earth fault trip
Generator Volts (L-L / L-N)
Engine oil pressure (PSI-Bar)
Generator Ampere (L1,L2,L3) d) LED Indications
Engine temperature (°C&°F) Four configurable LED’s like:
Generator Frequency (Hz) Mains available
Plant battery volts Generator available
Engine hours run Mains on load
Mains Volts (Ph-Ph/Ph-N) Generator on load
Generator kVA, kWh
Generator kW as % of rated kW setting
Generator Cos (σ)

2. Power Outlet Terminal Board Mounted on the Genset Base Frame

 

OPTIONAL EQUIPMENTS
Fuel-Water separator filter Automatic fuel filling system
Engine oil heater Manual sump oil drain pump
Residential silencer Enclosure, Sound proof canopy
Charge ammeter Low fuel level alarm
Main fuel tank Anti condensation heater for alternator
4 pole contactor Tool kit
Over sized alternator Automatic transfer switch by contactor or
Automatic Synchronising and power control system motorized circuit breaker
 

 
        CHASSIS

The complete gen-set is mounted as whole on a heavy-duty fabricated, steel base frame
Anti-vibration pads are fixed between the engine/ alternator feet and the base frame
Base frame design incorporates an integral fuel tank (Up to 750 kVA)
The generating set can be lifted or carefully pushed / pulled by the base frame
Dial type fuel gauge and drain plug on the fuel tank
Forklift pockets within base frame (up to 500kVA)
 

DIMENSIONS

OPEN TYPE
DIMENSIONS(LxWxH) mm 3031x1400x1978
DRY WEIGHT kg 2336

SOUND ATTENUATED TYPE

DIMENSIONS(LxWxH) mm 4515x1463x2165
DRY WEIGHT kg 3800
 

      CANOPY

   

All canopy parts are designed with modular principles Exhaust silencer is protected against environment influences
Without welding assembly Thermally insulated engine exhaust system
Doors on each side Emergency stop push button is installed outside of the canopy
All metal canopy parts are painted by electrostatic Easy lifting and moving
polyester powder paint Easy maintenance and operation