Dupont Capstone Fs-60: Technical Information

DuPont™ Capstone™ FS-60
FLUOROSURFACTANT
TECHNICAL INFORMATION
Description: Product Characteristics

• Capstone™ FS-60 is a water-soluble, anionic Appearance Yellow to amber, clear liquid
fluorosurfactant that gives low aqueous surface tensions
with minimal foaming. pH 6-8
• Capstone™ FS-60 offers excellent wetting, leveling, anti- Specific Gravity 1.1
block and anti-cratering performance. Stability Freeze-thaw stable. Mix well before use.
• This fluorosurfactant is specifically formulated for leveling Composition 40% solids
of floor finishes. It is also effective at reducing the surface 15% isopropyl alcohol
tension of concentrated cleaning solutions
45% water
• Capstone™ FS-60 complies with the ecological criteria
for the potential award of the Community eco-label to Performance
indoor and outdoor paints set in the Commission Decisions
SURFACE TENSION
C(2008)4452 and C(2008)4453, as active substances are not
listed in the OECD “Preliminary lists of PFOS, PFAS, PFOA, Static Surface T ension in Deionized Water:
PFCA, related compounds and chemicals that may degrade Capstone™ FS-60
to PFCA (as revised in 2007)” referred to in the decisions. 80
Product Selection 70
60
Surface Tension (dyne/cm)
If you are currently buying an anionic fluorosurfacant such as

Zonyl® FSJ, switch now to Capstone™ FS-60. 50
40
Applications
30
• Water-based floor finishes, waxes and polishes
o Provides wetting and enhanced leveling. 20
o Good re-wet characteristics in multi-coat applications. Static Surface Tension (dynes/cm)
o Reduces cratering and provides faster spreading. 10
o Suggested use rates are 0.005-0.02% active ingredient.
0
• Additive to water-based paints and coatings 0 0.001 0.01 0.1 0.5
o Excellent leveling, anti-cratering, wetting and blocking Co n ce n tratio n (% A.I.)
performance.
o Compatible with silicone additives FOAMING
o Suggested use rates are 0.05-0.15% active ingredient.
• Effective defoamer; Ideal for coatings applications.
• Ross-Miles Foam Volume (mL) at 25°C (77°F) at 0.1% A.I

(active ingredient)
Initial 3 min 5 min 10 min
DI Water 5 5 5 5
DuPont™ Capstone™ Products:
• Deliver maximum performance, minimum environmental footprint1*.
• Provide same or better performance without compromising fluorine
efficiency.
• Impart step change reduction in trace impurities below the limit of
detection**.
• Are short chain molecules that cannot break down to PFOA in the
environment.
• Are supported by an in-depth foundation of data.
• Are in compliance with REACH requirements.
• Listed on TSCA inventory.
• Meet the goals of the U.S. Environmental Protection Agency 2010/15 PFOA
Stewardship Program.
* Short-chain molecules that cannot break down to PFOA in the

environment. Capstone™ products meet the goals of the voluntary
U.S. EPA 2010/15 PFOA Stewardship Program.
** Below the limit of detection for PFOA based on the published
analytical method found in the Journal of Chromatography A (2006)
117-124.
DuPont Chemical and Fluoroproducts

Customer Service Center Americas
Barley Mill Plaza, Bldg. 23
Wilmington, DE 19898
866-828-7009
Customer Service Center Europe/Middle East/Africa

DuPont de Nemours (France) S.A.S.
Tel +33 1 30 92 8224
Customer Service Center Asia Pacific

DuPont (China)
R&D Center, Shanghai
Tel +86 21 2892 1019
DuPont (Taiwan) Office, Taipei

Tel +886 2 2514 4412
www.capstone.dupont.com
The information set forth herein is furnished free of charge and based on technical data that DuPont believes
to be reliable. It is intended for use by persons having technical skill, at their own risk. Because conditions
of use are outside our control, we make no warranties, express or implied, and assume no liability in
connection with any use of this information. Nothing herein is to be taken as license to operate under or a
recommendation to infringe any patents.
Copyright © 2010 DuPont. The DuPont Oval Logo, DuPont™, The miracles of science™,
Capstone™ are registered trademarks or trademarks of E.I. du Pont de Nemours and Company
or its affiliates. All rights reserved.
K- 23570 (1/10) Printed in the U.S.A.

Dupont Capstone Fs-60: Technical Information

Uploaded by

Copyright:

Available Formats

Dupont Capstone Fs-60: Technical Information

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dupont Capstone Fs-60: Technical Information

Uploaded by

Copyright:

Available Formats

DuPont™ Capstone™ FS-60

Description: Product Characteristics

If you are currently buying an anionic fluorosurfacant such as

• Ross-Miles Foam Volume (mL) at 25°C (77°F) at 0.1% A.I

Initial 3 min 5 min 10 min

* Short-chain molecules that cannot break down to PFOA in the

DuPont Chemical and Fluoroproducts

Customer Service Center Europe/Middle East/Africa

Customer Service Center Asia Pacific

DuPont (Taiwan) Office, Taipei

You might also like