Combustible Dust Poster
Combustible Dust Poster
Combustible Dust Poster
Dust Control Measures The facility selects and uses industrial trucks that are approved for the
combustible dust locations.
The dust-containing systems (ducts and dust collectors) are designed
in a manner (i.e., no leaking) that fugitive dusts are not allowed to Prevention Measures
accumulate in the work area. The facility has separator devices to remove foreign materials
The facility has a housekeeping program with regular cleaning fre- capable of igniting combustible dusts.
quencies established for floors and horizontal surfaces, such as ducts, MSDSs for the chemicals which could become combustible dust under
pipes, hoods, ledges, and beams, to minimize dust accumulations normal operations are available to employees.
within operating areas of the facility.
Employees are trained on the explosion hazards of combustible dusts.
The working surfaces are designed in a manner to minimize dust
accumulation and facilitate cleaning. Protection Measures
Electrically-powered cleaning devices such as vacuum cleaners, and Dust collectors are not located inside of buildings. (Some exceptions)
electrical equipment are approved for the hazard classification for Rooms, buildings, or other enclosures (dust collectors) have explosion
Class II locations. relief venting distributed over the exterior wall of buildings and
The facility has an ignition control program, such as grounding and enclosures.
bonding and other methods, for dissipating any electrostatic charge that Explosion venting is directed to a safe location away from employees.
could be generated while transporting the dust through the ductwork. The facility has isolation devices to prevent deflagration propagation
The facility has a Hot Work permit program. between pieces of equipment connected by ductwork.
Areas where smoking is prohibited are posted with “No Smoking” signs. The dust collector systems have spark detection and explosion/
Duct systems, dust collectors, and dust-producing machinery are bonded deflagration suppression systems.
and grounded to minimize accumulation of static electrical charge. Emergency exit routes are maintained properly.