Scribd Logo
Upload

Welcome to Scribd!

  • 78 views

    Q2018 Series: Linear Low Density Polyethylene (LLDPE)

    Uploaded by

    lyes
    This document provides information about Linear Low Density Polyethylene (LLDPE) resins under the trade name Lotrène® Q2018 Series. It describes the product description and uses, additive package, properties, processing details, handling and storage recommendations, safety information, and other technical details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Q2018 Series: Linear Low Density Polyethylene (LLDPE)

    Uploaded by

    lyes
    78 views2 pages
    This document provides information about Linear Low Density Polyethylene (LLDPE) resins under the trade name Lotrène® Q2018 Series. It describes the product description and uses, additive package, properties, processing details, handling and storage recommendations, safety information, and other technical details.

    Original Title

    Datasheet_Q2018-2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about Linear Low Density Polyethylene (LLDPE) resins under the trade name Lotrène® Q2018 Series. It describes the product description and uses, additive package, properties, processing details, handling and storage recommendations, safety information, and other technical details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    78 views2 pages

    Q2018 Series: Linear Low Density Polyethylene (LLDPE)

    Uploaded by

    lyes
    This document provides information about Linear Low Density Polyethylene (LLDPE) resins under the trade name Lotrène® Q2018 Series. It describes the product description and uses, additive package, properties, processing details, handling and storage recommendations, safety information, and other technical details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    LLDPE/2020/Q2018

    Date: 10/May/2020

    Q2018 Series
    Linear Low Density Polyethylene (LLDPE)

    DESCRIPTION AND USE


    Lotrène® Q2018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene
    (C4) co-monomer.

    Lotrène®

    ADDITIVE PACKAGE
    Product Slip (Erucamide) (ppm) Antiblock (ppm) Thermal Stabilizers

    Q2018N no no

    Q2018H 1500 3200

    Q2018C no no

    Values indicated are target values. Actual values might differ from batch to batch.

    PROPERTIES
    POLYMER PROPERTIES VALUE UNIT TEST METHOD

    Density* 0.918 g/cm3 ASTM D792-

    Melt Flow Index (190 °C /2.16 kg) 2.0 g/10 min. ASTM D1238-

    Crystalline Melting Point 121 °C Internal

    Vicat Softening Point 100 °C ASTM D1525- (A120)

    (* Density of base resin)

    FILM PROPERTIES VALUE (*) UNIT TEST METHOD

    Tensile Strength @ Yield MD/ TD 11/11 MPa ASTM D882-

    Tensile Strength @ Break MD/ TD 35/32 MPa ASTM D882-

    Elongation @ Break MD/ TD 850/900 % ASTM D882-

    Secant modulus @ %1 MD/ TD 215/245 MPa ASTM D882-

    Impact Strength, F 50 130 g ASTM D1709-

    220/420 g
    Tear resistance MD/ TD ASTM D- 1922
    55/105 N/mm

    Haze 14 % ASTM D1003-

    Gloss (@ 45 °) 55 - ASTM D2457-

    Screw 45 mm, L/D 30, die gap 2.2 mm, output 30 kg/hr, mass temperature °210C, thickness 40 µm and BUR 2.5:1)
    Processing:
    Extrusion temperatures: 170-210 °C
    Melt temperature 190 *C
    Blow-up ratio: 2:1 to 3:1
    Die gap: > 1.8 mm

    Lotrène® Q2018 Series can be processed at high output rates with moderate extrusion pressure, good bubble

    on conventional mono or co extrusion machines.

    HANDLING & STORAGE


    Polyethylene products should be stored in their original packaging or in clean appropriate silos.
    The products should be stored in a dry and well-ventilated area and should not be exposed to direct sunlight and/
    or heat in any form since this may adversely affect their properties.
    As a general rule, our products should not be stored for more than three months from receipt date.

    SAFETY
    Under normal conditions Lotrène® products do not present a toxic hazard through skin contact or inhalation.
    For detailed information please refer to the Safety Data Sheet.

    FOOD CONTACT & REACH


    food contact legislations. Limitations may apply.

    the intrinsic properties of chemical substances.

    NOT SUITABLE FOR PHARMACEUTICAL OR MEDICAL APPLICATIONS

    TECHNICAL DISCLAIMER
    The values reported in this technical data sheet are the results of tests carried out in accordance with standard test
    procedures in a laboratory environment. Actual properties may vary depending on batch and extrusion conditions.

    Before using this product, the user is advised and cautioned to make its own determination and assessment of the

    It is the ultimate responsibility of the user to ensure that the product is suitable for, and the information is applicable

    or implied, or allegedly arising from any usage of any trade or from any course of dealing, in connection with the
    use of the information contained herein or the product itself.
    The user expressly assumes all risks and liabilities, whether based in contract, tort or otherwise, in connection
    with the use of the information contained herein or the product itself. Trademarks may not be used in any manner
    other than expressly authorized in a written agreement and no trademark or license rights of any kind are granted
    hereunder, by implication or otherwise.

    Qatofin Company Limited Q.P.J.S.C.


    P. O. Box 50555, Mesaieed, State of Qatar
    Tel : (+974) 4477 7111, Fax : (+974) 4477 1346
    www.qapco.com/qatofin

    Operated by QAPCO

    You might also like