Electrical Rubber Mat Specification
Electrical Rubber Mat Specification
Overview
Electrical Rubber Mat is used for the safety of the workmen against the electrical hazards. These
Electrical Rubber Mats are manufactured as per old Indian Standard i.e. IS 5424:1969. The standard
has become outdated and has been replaced by the IS 15652:2006 standard.
However, it is still popular among its users since its highly economical and suitable for general use.
FEATURES
“DURATUF” is well known for its premium quality rubber mat for electrical purpose. Manufacturer’s
Test Certificate is provided along with the supply.
Technical Information
Product Working AC Proof Di-electric Weight
Thickness
Code Voltage Voltage Strength per m2
RM 001 6.0 mm (1/4") 0.4 KV 15.0 KV 40.0 KV 10.0 Kgs Applications
RM 002 8.0 mm (5/16") 1.0 KV 15.0 KV 40.0 KV 13.0 Kgs Duratuf Electrical Rubber Mats has
RM 003 10.0 mm (3/8") 7.5 KV 15.0 KV 40.0 KV 17.0 Kgs been designed for use as electrical
RM 004 12.0 mm (1/2") 11.0 KV 15.0 KV 40.0 KV 20.0 Kgs safety floor covering in:
RM 005 16.0 mm (5/8") 17.0 KV 15.0 KV 40.0 KV 27.0 Kgs > Electrical Substations
RM 006 19.0 mm (3/4") 22.0 KV 15.0 KV 40.0 KV 32.0 Kgs > Near HT/LT Control Panels
RM 007 25.0 mm (1") 33.0 KV 15.0 KV 40.0 KV 42.0 Kgs > In Front of Switchboards
RM CD Upto 50.0 mm Upto 33.0 KV 15.0 KV 40.0 KV -
> Around Buss Bars
(Custom)
> Transformer, Generator & Lift Rooms
Characteristics Values > For Outdoor/Indoor Onsite Work
Material Composition Special rubber compound of high quality natural rubber free from any on Live Equipment
insertion.
Antiskid Design Antiskid Checkered Design on Top (Square Profile) with Smooth Bottom.
Fluted Design also available. Inquiry/Ordering Info
Tensile strength (T.S.) 50 Kg/cm2 (min.) > Working/Use Voltage *
Elongation at Break (E.B.) 250% (min.) > Surface Finish *
Leakage Current 10 mA (max.) > Thickness x Width x Length *
Water Absorption 4% (max.)
> Colour *
Compression Set 10% (max.)
> Total Quantity Required *
Ageing Properties at 70±1°C a) T.S.: ±10% - 25% change (max.)
for 168 hours. b) E.B.: ±10% - 25% change (max.) * Mandatory
www.duratufproducts.com | [email protected]
The date on this sheet represent typical values and should be used as a guide only. We reserve the right to Duratuf Products | Insulating Mats
change the specification without notice and assumes no liability for use of this information.