Scribd
Upload
81 views2 pages

LF153 LF253 - LF353: Wide Bandwidth Dual J-Fet Operational Amplifiers

This document provides information about dual J-FET operational amplifiers models LF153, LF253, and LF353. It includes key specifications like low power consumption, wide input and output voltage ranges, high slew rate of 16V/μs, and internal frequency compensation. The document also provides order codes, pin connections, a schematic diagram, and absolute maximum ratings for the operational amplifiers.

Uploaded by

KS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views2 pages

LF153 LF253 - LF353: Wide Bandwidth Dual J-Fet Operational Amplifiers

This document provides information about dual J-FET operational amplifiers models LF153, LF253, and LF353. It includes key specifications like low power consumption, wide input and output voltage ranges, high slew rate of 16V/μs, and internal frequency compensation. The document also provides order codes, pin connections, a schematic diagram, and absolute maximum ratings for the operational amplifiers.

Uploaded by

KS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LF153

LF253 - LF353
WIDE BANDWIDTH
DUAL J-FET OPERATIONAL AMPLIFIERS

.. LOW POWER CONSUMPTION


WIDE COMMON-MODE (UP TO VCC+) AND

.. DIFFERENTIAL VOLTAGE RANGE


LOW INPUT BIAS AND OFFSET CURRENT

. OUTPUT SHORT-CIRCUIT PROTECTION


HIGH INPUT IMPEDANCE J–FET INPUT

.. STAGE
INTERNAL FREQUENCY COMPENSATION

. LATCH UP FREE OPERATION


HIGH SLEW RATE : 16V/µs (typ)
N D
DIP8 SO8
(Plastic Package) (Plastic Micropackage)

DESCRIPTION
The LF353 are high speed J–FET input dual opera- ORDER CODES
tional amplifiers incorporating well matched, high
Package
voltageJ–FET andbipolartransistorsin a monolithicin- Part Number Temperature
N D
tegrated circuit.
LF353 0oC, +70oC • •
The devicesfeaturehigh slew rates, low input bias and

153-01.TBL
o o
offset currents, and low offset voltage temperature LF253 –40 C, +105 C • •
coefficient. LF153 o
–55 C, +125 Co
• •

PIN CONNECTIONS (top view)

1 8 1 - Output 1
2 - Inverting input 1
3 - Non-inverting input 1
2 - 7 4 - V CC
-

5 - Non-inverting input 2
+ 6 - Inverting input 2
3 - 6 7 - Output 2
8 - V CC+
4 + 5

November 1995 1/9


LF153 - LF253 - LF353

SCHEMATIC DIAGRAM (each amplifier)

VCC

No n-inve rtin g
inpu t
Invertin g
inpu t
10 0Ω
2 0 0Ω
Output

1 0 0Ω
30k

8.2k

1.3k 35k 1 .3k 35k 1 0 0Ω

VCC

ABSOLUTE MAXIMUM RATINGS 153-03.EPS

Symbol Parameter Value Unit


VCC Supply Voltage - (note 1) ±18 V
Vi Input Voltage - (note 3) ±15 V
Vid Differential Input Voltage - (note 2) ±30 V
Ptot Power Dissipation 680 mW
Output Short-circuit Duration - (note 4) Infinite
o
Toper Operating Free Air Temperature Range LF353 0 to 70 C
LF253 –40 to 105
153-02.TBL

LF153 –55 to 125


o
Tstg Storage Temperature Range –65 to 150 C
Notes : 1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the
zero reference level is the midpoint between VCC+ and VCC–.
2. Differential voltages are at the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less.
4. The output may be shorted to ground or to either supply. Temperature and /or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.

2/9

You might also like