Scribd
Upload
94 views1 page

ASTM A533 Low Alloy Steel, Grade B, Class 3

This document provides information on ASTM A533 Low Alloy Steel, Grade B, Class 3 including its physical, mechanical, electrical, thermal and component element properties. It lists key values for metrics like tensile strength, yield strength, elongation, modulus of elasticity and thermal conductivity.

Uploaded by

Dhanyaja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views1 page

ASTM A533 Low Alloy Steel, Grade B, Class 3

This document provides information on ASTM A533 Low Alloy Steel, Grade B, Class 3 including its physical, mechanical, electrical, thermal and component element properties. It lists key values for metrics like tensile strength, yield strength, elongation, modulus of elasticity and thermal conductivity.

Uploaded by

Dhanyaja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASTM A533 Low Alloy Steel, Grade B, Class 3

Categories: Metal; Ferrous Metal; Alloy Steel; Low Alloy Steel; ASTM Steel; Carbon Steel; Low Carbon Steel

Material Notes: Manganese molybdenum alloy steel plate, quenched and tempered

Pressure vessel quality

Key Words: SA533, A533(93)


Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
 
Physical Properties Metric English Comments
Density  7.80 g/cc 0.282 lb/in³ Typical of ASTM Steel
 
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate  690 - 860 MPa 100000 - 125000 psi
Tensile Strength, Yield  570 MPa 82700 psi
Elongation at Break  16 % 16 % in 50mm
Modulus of Elasticity  200 GPa 29000 ksi Typical Carbon Steel
Bulk Modulus  160 GPa 23200 ksi Typical for Steel
Poissons Ratio  0.29 0.29 Typical Carbon Steel
Shear Modulus  80.0 GPa 11600 ksi Typical for Steel
 
Electrical Properties Metric English Comments
Electrical Resistivity  0.0000170 ohm-cm 0.0000170 ohm-cm Typical Carbon Steel
 
Thermal Properties Metric English Comments
CTE, linear  12.0 µm/m-°C 6.67 µin/in-°F Typical Carbon Steel
Specific Heat Capacity  0.470 J/g-°C 0.112 BTU/lb-°F Typical Carbon Steel
Thermal Conductivity  52.0 W/m-K 361 BTU-in/hr-ft²-°F Typical Carbon Steel
 
Component Elements Properties Metric English Comments
Carbon, C  0.25 % 0.25 %
Iron, Fe  97 % 97 % as balance
Manganese, Mn  1.15 - 1.5 % 1.15 - 1.5 %
Molybdenum, Mo  0.45 - 0.60 % 0.45 - 0.60 %
Nickel, Ni  0.40 - 0.70 % 0.40 - 0.70 %
Phosphorus, P  0.035 % 0.035 %
Silicon, Si  0.15 - 0.40 % 0.15 - 0.40 %
Sulfur, S  0.040 % 0.040 %

References for this datasheet.

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into
MatWeb.

MatWeb, Your Source for Materials Information - WWW.MATWEB.COM / Page 1 / 1

You might also like