Tianjin Pipe International

Economic & Trading Corporation

Steel Pipe & Tube

Products Catalog

Tianjin Pipe International Economic & Trading Corporation

Add.: W4-5AB 51#, 3rd Avenue TEDA, Tianjin P.R. China
Tel.: + 8622 6628 0988
Fax: + 8622 6628 0681
P.C.: 300457

2013
 Preface
Tianjin Pipe (Group) Corporation (TPCO), located in Tianjin, a dynamic fast growing industrial city in Tianjin Pipe International Economic & Trading Corporation is a wholly owned subsidiary of
North China, specializes in the production of seamless and welded steel pipes. Commissioned with the Tianjin Pipe (Group) Corporation, exclusively responsible for global marketing of its products. The com-
world’s most modern and technically advanced equipment. TPCO has a capacity to produce full range pany is also responsible for the procurement of raw materials, spare parts and equipments from overseas
and a wide variety of quality seamless pipes which are mainly composed of casing, tubing, line pipe and for TPCO and other domestic customers. Few overseas subsidiaries and representative offices have been
other products, such as high, medium and low-pressure boiler tubes, high-pressure cylinder tube, me- set up in U.S.A, U.A.E, Germany, Singapore, Indonesia,Thailand, Korea, Russia and Hong Kong to bring
chanical pipe, hydraulic support tube, structural pipe and pipes for fluid transmission purposes. TPCO has us closer to our customers keeping in perspective our goal to provide the best level of service to our
been striving to develop its own high quality product series. Besides API series products, TPCO has also clients. The sales representatives and distributors have also been appointed in more than 50 countries and
own the proprietary TP series products and premium connection series products. regions in order to render better service to our customers.

TPCO has built one HFW 355 and one HFW 660 mill for producing high quality HFW pipes with the O.D. Besides the main products of pipe and tube, TPCO has also extended its product scope to some different
range from 5” (127mm) to 26” (660mm), W.T. from 0.126” (3.2mm) to 0.866” (22.0mm). The welded pipes areas such as fitting & accessories, hollow section, slotted pipe, stainless steel coil and pipe, PPGI color
majorly for casing, line pipe, fluid transmission pipe and round structural pipe, which are in conformity with coil, copper rod etc. We also have the exclusive right to supply some products and services which have
API, ISO, JIS, EN，GB (China National Standards) and other specifications according to customer’s absolute advantage in the international market.
requirement.
We warmly welcome inquiries from our potential clients and look forward to becoming your source of
TPCO’s products have been used in more than 24 domestic oil-fields onshore and offshore in China and choice for pipe and tube and other products now and in the future. We welcome you to visit us to get your
exported to more than 100 countries and regions in the worldwide. TPCO is one of the world top seam- first hand impression of our products and facilities.
less pipe and service providers.

From 1994 until now, TPCO has been granted a number of acceptance certificates issued by several
international and domestic institutions, such as Certificate of Authority to use the Official API Monogram;
Quality Management System Certificate for ISO 9001 by SGS United Kingdom Ltd; Yarsley International
Certification Services; Det Norske Veritas (DNV); Lloyd’s Register of shipbuilding; ABS Certificate of
Design and Manufacturing Assessement; Product attestations by European Directive PED 97/23/EC and
German Regulation (AD-W0/TRD100), and others. TPCO’s products also been well accepted by major
CONTENTS：
international oil companies such as Shell, BP, Chevron, Saudi ARAMCO, Total, Exxon Mobil, Conoco- 02. Preface
Phillips, Apache, etc. 03. Tianjin Pipe International Economic & Trading Corporation
06. Production Process Flow Chart
08. Seamless Pipes
08. API Casing
10. API Tubing
11. TPCO Proprietary Casing & Tubing
12. Semi-finished Drill Pipe
13. Line Pipe
14. High Pressure Cylinder Pipe & Accumulator Pipe
15. Coupling
16. Low-Medium And High Pressure Boiler Tubes
18. Mechanical Pipe

20. HFW Pipe

API 5CT API 5L ISO 9001 ISO 14001
21. Casing
TÜV LIoyd
OHSMS 18001 23. Line Pipe

26. Production & Sales Network

02 03
 Mill Size Range Rich Human & Material Resources in R&D
(inch)
0 5 10 15 20 25 30
TPCO has strong research and development institutions. Its core competence is the technical center,
250MPM
responsible for all research and development of new products and other creative work. There are teams of

168PQF highly qualified professionals in the R&D center equipped with advanced instruments and equipment to
provide the technical guarantee required in new product development.
219Assel

460PQF
Total Quality Control & Customer Service
258PQF

508PQF
TPCO has established proven quality control systems in accordance with world-wide standards and is

720REM
continuously implementing the latest proven systems as they become available. The current systems were
established in accordance with API Q1 specifications, ISO9001 standards and others. TPCO insists on the
HFW
system of internal quality examination and has trained internal examiners organized in groups who play an
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 important role in system operations to attain the goal of “Total Quality Control”.
(mm)

Quality Products TPCO is committed to the highest level of customer service. Some of the goals are, on time delivery, close
communication and proactive after-sales service to attain full customer satisfaction.
Striving to become the world’s top quality producer of tubular goods, TPCO adheres to its following
internal guidelines:
• Superior material Main Customers
• Refined smelting
• Accurate rolling
• Precision finishing
• Meticulous work
All products are manufactured with high quality full skilled steel round billets whose features are high
purity, good uniformity and flawless surface. Using the most advanced rolling, heat treatment and finish-
ing lines and sophisticated inspection equipment and with the meticulous work of TPCO personnel,
premium pipes are produced and our goal of total quality control is attained.

Advanced Means Of Quality Inspection

To ensure product quality, a number of on-line inspection equipment has been established to monitor
composition analysis, non-destructive testing, wall thickness measurement, drifting, hydrostatic testing
and other critical elements of pipes.
In addition to on-line inspection and testing, TPCO has also set up five full-time & professional quality
inspection stations which are responsible for the analysis, inspection and determination of process
quality, quality of incoming raw material, physical and chemical properties of products and technical
indexes, etc.

04 05
 Production Process Flow Chart

MPM & PQF Rotary Expanding Mill

Blast furnace

Mother tubes Heating furnace Descaler Rotary expanding mill Reeler mill Sizing mill
Iron ore Coal base DRI kiln Sponge iron and scrap Electric arc furnace Ladle furnace Vacuum degassing Continous caster of round

Rolling mill Piercing mill Rotary heating furnace Billet cutting Cooling bed

Straightening End cropping Heat treatment Intermediate storage Visual check Cooling bed

Reheating furnace Sizing mill Cooling bed Cross cutting saw Straightening

Bevelling Ultrasonic test Hydrostatic testing Weighing，measuring，marking Finished pipes

Hot sizing mill Tempering furnace Quenching Quenching furnace

Hot straightening Cold straightening Nondestructive inspection Threading

Nondestructive inspection
HFW
Casing / tubing Hydrostatic testing Drifting Coupling starter & bulk-on machine

Plain end pipe Hydrostatic testing Machining Uncoiling Strip leveling Strip end shear Cross welding Spiral strip accumulator Travelling strip
cutting device

Assel

Edge milling Strip UT Forming High frequency welding Online weld seam UT

Billet cutting Rotary heating furnace Piercing Assel rolling mill Sizing mill

Online weld seam annealer Air cooling，water cooling Sizing Flying saw

Bevelling Cutting Ash blasting Straightening Cooling bed

Welding seam ultrasonic test

Sampling Flattening test Straightening Hydrostatic testing Bevelling
（UT）on pipe body，pipe-end

NDT Manual inspection Weighing & measuring Marking & packing & storing

Length-measuring,
Visual inspection Varnishing End protection cap Packing Transportation
weighing, and marking
Grinding

06 07
 Seamless Pipe API Casing

Type of pipe end-finisha Type of pipe end-finisha

C110

a: Buttress casing is available with regular, special clearance couplings or special clearance couplings with special bevel.
P= Plain end; S= Short round thread; L= Long round thread; B= Buttress thread.

08 09
 Seamless Pipe API Tubing Seamless Pipe TPCO Proprietary Casing & Tubing

High Anti-Collapse Casing TPxxT & TPxxTT Series

Featuring uniform, fine microstructure and optimized chemical composition, these casings can sustain
higher external pressure and axial load, suitable for offshore oil wells and those with complicated geological
conditions. (such as TP80T, TP110TT,…)

Sour Service Casing TPxxS & TPxxSS Series

Featuring excellent anti-H2S corrosion properties, these casings are suitable for medium and deep oil well
applications in H2S environment. (such as TP80S, TP95S,…)

Product series of anti-corrosion casing

a: Nominal linear masses (col.6,7,8) are shown for information only.

b: The densities of martensitic chromium steels (L80 types 9Cr and 13Cr) are different from carbon steels. The masses shown are therefore not
accurate for martensitic chromium steels. A mass correction factor of 0.989 may be used.
P= Plain end; N= Non-upset threaded and coupled; U= External upset threaded and coupled; L= Integral joint.

Heavy Oil Recovery Casing TPxxH Series

Featuring good thermal stability, high anti-collapse strength and good ductility, excellent sealing property in
high temperatures, these casings are used specially for thermal production wells having high strength and
ductility, suitable for steam injection at 350°C~400°C, and injection pressure 15~26 Mpa at the perforation
section of wells. (such as TP90H, TP100H,...)

10 11
 Seamless Pipe Semi-finished Drill Pipe Seamless Pipe Line Pipe
Line pipe and process pipe products are intended for the transmission of petroleum, natural gas and
other gases & fluids, including over a hundred specifications for various applications in regular, pressure,
onshore, offshore, low-temperature, high-temperature corrosion-resistant and other applications for
onshore, offshore, chemical and petrochemical refinery projects. TPCO can supply products according
to international standards such as API5L, ASTM, ASME, JIS, DIN, EN, etc. And it also can meet the
customers' special specifications by mutual agreement.

All line pipes mentioned above can meet Standard NACE MR-01-75 upon customer’s request.

Standard grade & application

Standard Grade Application
Up to X80
API 5L(PSL1, PSL2) Up to L555 Transmission of petroleum & natural gas
ASTM A53/ASTM SA53 A, B
ASTM A106/ASTM SA106 A, B, C Transmission of low-pressure water, coal gas, air, oil & steam

DIN 1629 ST37.0, ST44.0, ST52.0 Regular line pipe

JIS G3454 STPG370, STPG410 Pressure pipe,100kg/m2 ( -10℃~350℃）
JIS G3455 STPG370, STPG410, STPG480 High pressure pipe, 100-1000kg/m2 ( -10℃~350℃）
JIS G3456 STPG370, STPG410, STPG480 High pressure pipe, 350℃~400℃
CAN/CSA Z245.1 172, 207, 241, 291, 317, 259, 414, 448, 483, 550 Transmission of oil & natural gas
ASTM A333 6 Low temperature
DNV-OS-F101 Up to 485/X70 Transmission of petroleum & natural gas offshore
In addition, TPCO produces and supplies to customers’ product specification, such as: Saudi Aramco (01-SAMSS-031/035), Shell (DEP), TOTAL
(GS EP PLR 201/211), ADCO (ES-30-99-00-0105), KOC (KOC-MS-001) etc.

12 13
 Seamless Pipe High Pressure Cylinder Pipe & Accumulator Pipe Seamless Pipe Coupling
High-pressure seamless cylinders are made either from billets, plate or seamless pipes. The latter Round thread and buttress thread casing couplings dimensions, weights and tolerances.
production process is very popular among cylinder manufacturers. Cylinder pipes are provided as raw
material for making cylinders. The advantages of the cylinder made by seamless pipe are good external
and internal surface quality, uniform wall thickness, light in weight, simple process procedures, high
production efficiency, high yield rate. Outside diameter Minimum Iength Weight

Round thread
Specifications of high-pressure cylinder tube Size Round thread Buttress Buttress Round thread
Short Long Buttress
O.D(mm) W.T(mm)
60 4.5-6.5
W W NL NL NL Short Long
70 4.5-7.0
89 4.5-8.0
in mm in mm in mm in mm in mm in mm lb kg lb kg lb kg
102, 108, 114, 121 4.5-10.0
123, 127, 140 (139.7), 146, 152 (152.4) 4.5-12.0 4-1/2 114.3 5.000 127.0 5.000 127.0 6-1/4 158.8 7 177.8 8-7/8 225.4 7.98 3.623 9.15 4.154 10.11 4.590
165 5.0-12.0
168 5.0-14.0 5 127.0 5.563 141.3 5.563 141.3 6-1/2 165.1 7-3/4 196.9 9-1/8 231.8 10.26 4.658 12.66 5.748 12.99 5.897
178, 180, 182, 194, 204, 219, 223 5.5-15.0
229 5.5-14.0 5-1/2 129.7 6.050 153.7 6.050 153.7 6-3/4 171.5 8 293.2 9-1/4 235.0 11.53 5.235 14.14 6.420 14.14 6.420

232 6.0, 8.0-18.0

6-5/8 468.3 7.390 187.7 7.390 187.7 7-1/4 184.2 8-3/4 222.3 9-5/8 244.5 20.09 9.121 24.98 11.341 24.46 11.105
245 6.5-20.0
255, 262, 267, 273, 279 7.5-21.0, 24.0-30.0
7 177.8 7.656 200.0 7.656 200.0 7-1/2 184.2 9 228.6 10 254.0 18.47 8.385 23.85 10.828 23.22 10.542
325 7.5-9.0
351 14 7-5/8 193.7 8.500 215.9 8.500 215.9 7-3/4 184.2 9-1/4 235.0 10-3/8 263.5 27.08 12.294 34.42 15.627 34.85 15.822
356 8.5-17.0, 20.0-27.0, 30.0-36.0
377 14 8-5/8 219.1 9.625 244.5 9.625 244.5 7-3/4 196.9 10 254.0 10-5/8 269.9 35.75 16.231 47.72 21.665 45.94 20.857
406 8.5-22.0, 25.0-28.0, 35.0-38.0
559 16.0-27.0 9-5/8 244.5 10.625 269.9 10.625 269.9 7-3/4 196.9 10-1/2 260.4 10-5/8 269.9 39.71 18.028 56.05 25.447 51.00 23.154
610 18.0-30.0
10-3/4 273.1 11.750 298.5 11.750 298.5 8 203.2 - - 10-5/8 269.9 45.76 20.775 - - 56.69 25.737
630 18.0-30.0

Chemical composition 11-3/4 298.5 12.750 323.9 12.750 323.9 8 203.2 - - 10-5/8 269.9 49.87 22.640 - - 61.74 28.030

Steel Chemical composition(%) 13-3/8 339.7 14.375 365.1 14.375 365.1 8 203.2 - - 10-5/8 269.9 56.52 25.660 - - 69.98 31.770
Grade C Si Mn P S P+S Cr Mo Ni Cu V
16 406.4 17.000 431.8 17.000 431.8 9 228.6 - - 10-5/8 269.9 76.96 34.910 - - 88.81 40.280
30CrMo 0.26-0.34 0.17-0.37 0.40-0.70 ≤0.030 ≤0.025 ≤0.050 0.80-1.10 0.15-0.25 ≤0.20

34CrMo4 0.30-0.37 <0.40 0.60-0.90 ≤0.035 ≤0.030 ≤0.050 0.90-1.20 0.15-0.30 18-5/8 473.0 20.000 508.0 20.000 508.0 9 228.6 - - 10-5/8 269.9 119.07 54.010 - - 138.18 62.680
37Mn/1 0.36-0.40 0.17-0.37 1.50-1.75 ≤0.030 ≤0.025 ≤0.050 ≤0.30 ≤0.20
20 508.0 21.000 533.4 21.000 533.4 9 228.6 11-1/2 292.1 10-5/8 269.9 95.73 43.420 126.87 57.040 110.45 50.100
37Mn/2 0.34-0.38 0.17-0.37 1.45-1.70 ≤0.030 ≤0.025 ≤0.050 ≤0.30 ≤0.20

37Mn/3 0.30-0.37 0.17-0.37 1.40-1.75 ≤0.035 ≤0.035 ≤0.050 ≤0.30 ≤0.10 ≤0.30 ≤0.20 0.07-0.12

Mechanical performance
Mechanical property
Steel
Heat Treatment System for Specimen Tensile Strength* Yield Strength* Elongation Impact Test
Grade
(≥Mpa) (≥Mpa) (≥%) (≥J)
30CrMo Quenching 890+/-10℃ Tempering 650+/-10℃ 780 660 16 55
34CrMo4 ① Quenching 830-890 ℃ Tempering 540-680 ℃ 900-1100 650 12 40
34CrMo4 ② Quenching 830-890 ℃ Tempering 540-680 ℃ 1000-1200 800 11 -
37Mn/1 Normalizing 840+/-10℃ 730 520 16 30
37Mn/2 Quenching 840+/-10℃ Tempering 600+/-10℃ 730 610 16 55
37Mn/3 Normalizing 870+/-10℃ 730 520 16 30

Note:
34CrMo4 acc. to EN10083, others to GB18248
①　8<W.T≤ 20 ②　W.T≤ 8
* For reference only

14 15
 Seamless Pipe Low-Medium And High Pressure Boiler Tubes

16 17
 Seamless Pipe Mechanical Pipe

Chemical composition limits (%) as per ASTM A519 Mechanical pipe size range:

mm Wall thickness mm mm
114.0 6.0 24.0 114.0
121.0 6.0 37.0 121.0
127.0 6.0 37.0 127.0
133.0 6.0 24.0 133.0
141.0 6.0 24.0 141.0
152.0 6.0 40.0 152.0
153.7 13.0 40.0 153.7
159.0 12.0 40.0 159.0
168.0 10.0 45.0 168.0
180.0 7.0 70.0 180.0
194.0 6.0 65.0 194.0
203.0 6.0 65.0 203.0
Note:
219.0 6.0 65.0 219.0
The purchaser may specify the following maximum amounts: Copper, 0.3%; Aluminum, 0.05%; Oxygen, 0.0015%.
232.0 25.0 65.0 232.0
245.0 6.5 40.0 245.0
299.0 8.0 50.0 299.0
325.0 7.5 50.0 325.0
339.7 7.5 50.0 339.7
351.0 7.5 50.0 351.0
356.0 9.0 34.0 356.0
377.0 10.0 57.0 377.0
406.0 9.5 57.0 406.0
Typical tensile properties, hardness and thermal condition for some common carbon and 426.0 9.5 57.0 426.0
457.0 9.5 57.0 457.0
alloy steels 508.0 8.0 60.0 508.0
559.0 8.0 40.0 559.0
630.0 8.0 40.0 630.0
700.0 12.0 40.0 700.0
710.0 12.0 40.0 710.0

Note:
HR-Hot Rolled, SR-Stress Relieved, A-Annealed, N-Normalized, CW-Cold Worked.

18 19
 HFW Pipe HFW Pipe Casing
Two high level welded pipe production lines have been set up in TPCO, in which the line pipe, casing, Spec Weigh Outside Diameter Wall Thickness Drift Diameter Plain-end Wpe Type Of Pipe Finishing
(in) (Ib/ft) (in) (in) (in) (Ib/ft) H40 J55/K55 N80-1
mechanical pipe and structural round pipe can be produced according to international standards and
11.5 5.000 0.220 4.435 11.24 - PS -
customer’s requirements. The main equipments were imported from Germany, Austria, Norway and 13.0 5.000 0.253 4.369 12.84 - PSLB -
5
15.0 5.000 0.296 4.283 14.88 - PSLBE PLBE
Canada.
18.0 5.000 0.362 4.151 17.95 - - PLBE
14.0 5.500 0.244 4.887 13.71 PS PS -
15.5 5.500 0.275 4.825 15.36 - PSLBE -
17.0 5.500 0.304 4.767 16.89 - PSLBE PLBE
5 1/2
20.0 5.500 0.361 4.653 19.83 - - PLBE
23.0 5.500 0.415 4.545 22.56 - - PLBE
26.8 5.500 0.500 4.375 26.72 - - -
20.0 6.625 0.288 5.924 19.51 PS PSLB -
24.0 6.625 0.352 5.796 23.60 - PSLBE PLBE
6 5/8
28.0 6.625 0.417 5.666 27.67 - - PLBE
32.0 6.625 0.475 5.550 31.23 - - PLBE
17.0 7.000 0.231 6.413 16.72 PS - -
20.0 7.000 0.272 6.331 19.56 PS PS -
23.0 7.000 0.317 6.241 22.65 - PSLBE PLBE
7 26.0 7.000 0.362 6.151 25.69 - - PLBE
29.0 7.000 0.408 6.059 28.75 - - PLBE
32.0 7.000 0.453 5.969 31.70 - - PLBE
35.0 7.000 0.498 5.879 34.61 - - PLBE
24.0 7.625 0.300 6.900 23.49 PS - -
26.2 7.625 0.328 6.844 25.59 - PSLBE PLBE
29.7 7.625 0.375 6.750 29.06 - - PLBE
7 5/8
33.7 7.625 0.430 6.640 33.07 - - PLBE
39.0 7.625 0.500 6.500 38.08 - - PLBE
42.8 7.625 0.562 6.376 42.43 - - PLB
24.0 8.625 0.264 7.972 23.60 - PS -
28.0 8.625 0.304 7.892 27.04 PS - -
32.0 8.625 0.352 7.796 31.13 PS PSLBE -
8 5/8 36.0 8.625 0.400 7.700 35.17 - PSLBE PLBE
40.0 8.625 0.450 7.600 39.33 - - PLBE
44.0 8.625 0.500 7.500 43.43 - - PLBE
49.0 8.625 0.557 7.286 48.04 - - PLBE
32.30 9.625 0.312 8.845 31.06 PS - -
36.00 9.625 0.352 8.765 34.89 PS PSLB -
40.00 9.625 0.395 8.679 38.97 - PSLBE PLBE
43.50 9.625 0.435 8.599 42.37 - - PLBE
9 5/8
47.00 9.625 0.472 8.525 46.18 - - PLBE
53.50 9.625 0.545 8.379 52.90 - - PLBE
58.40 9.625 0.595 8.279 57.44 - - PLB
59.40 9.625 0.609 8.251 58.70 - - -
32.75 10.750 0.279 10.036 31.23 PS - -
40.50 10.750 0.350 9.894 38.91 PS PSB -
45.50 10.750 0.400 9.875 44.26 - PSBE -
45.50 10.750 0.400 9.794 44.26 - PSBE -
10 3/4
51.00 10.750 0.450 9.694 49.55 - PSBE PSBE
55.50 10.750 0.495 9.604 54.26 - - PSBE
60.70 10.750 0.545 9.504 59.45 - - -
65.70 10.750 0.595 9.404 64.59 - - -
42.00 11.750 0.333 10.928 40.64 PS - -
47.00 11.750 0.375 10.844 45.60 - PSB -
54.00 11.750 0.435 10.724 52.62 - PSB -
11 3/4 60.00 11.750 0.489 10.616 58.87 - PSB PSB
65.00 11.750 0.534 10.526 64.03 - - P
71.00 11.750 0.582 10.430 69.48 - - P

20 21
 HFW Pipe Casing HFW Pipe Line Pipe
Plain-end Wpe Type Of Pipe Finishing Nominal Size Outside Diameter Wall Thickness Plain-end Wpe
Steel Grade
NPS (in) mm (in) mm (Ib/ft) kg
5.563 141.3 0.126 3.2 7.32 10.90 B to X80
5.563 141.3 0.157 4.0 9.09 13.54 B to X80
5.563 141.3 0.173 4.4 9.97 14.86 B to X80
5.563 141.3 0.188 4.8 10.80 16.16 B to X80
5.563 141.3 0.205 5.2 11 .72 17.45 B to X80
5.563 141.3 0.219 5.6 12.51 18.74 B to X80
5.563 141.3 0.250 6.4 14.29 21.29 B to X80
5 9/16 5.563 141.3 0.281 7.1 15.87 23.50 B to X80
5.563 141.3 0.312 7.9 17.51 25.99 B to X80
5.563 141.3 0.323 8.2 17.98 26.92 B to X80
5.563 141.3 0.344 8.7 19.19 28.45 B to X80
5.563 141.3 0.375 9.5 20.80 30.88 B to X80
5.563 141.3 0.406 10.3 22.34 33.28 B to X80
5.563 141.3 0.437 11.1 23.93 35.64 B to X80
5.563 141.3 0.500 12.7 27.06 40.28 B to X60
6.625 168.3 0.126 3.2 8.75 13.03 B to X80
6.625 168.3 0.157 4.0 10.88 16.21 B to X80
P= Plain end; S= Short round thread; L= Long round thread; B= Buttress thread. 6.625 168.3 0.173 4.4 11 .94 17.78 B to X80
6.625 168.3 0.188 4.8 12.99 19.35 B to X80
6.625 168.3 0.205 5.2 13.94 20.91 B to X80
6.625 168.3 0.219 5.6 15.00 22.47 B to X80
6.625 168.3 0.250 6.4 17.04 25.55 B to X80
6 5/8 6.625 168.3 0.281 7.1 18.99 28.22 B to X80
6.625 168.3 0.312 7.9 21.06 31.25 B to X80
Casing mechanical properties 6.625 168.3 0.323 8.2 21.74 32.38 B to X80
6.625 168.3 0.344 8.7 23.10 34.24 B to X80
6.625 168.3 0.375 9.5 25.05 37.20 B to X80
6.625 168.3 0.406 10.3 26.94 40.13 B to X80
6.625 168.3 0.437 11.1 28.89 43.03 B to X80
6.625 168.3 0.500 12.7 32.74 48.73 B to X80
8.625 219.1 0.157 4.0 14.12 21.22 B to X80
8.625 219.1 0.173 4.4 15.64 23.30 B to X80
8.625 219.1 0.188 4.8 16.96 25.37 B to X80
8.625 219.1 0.205 5.2 18.28 27.43 B to X80
8.625 219.1 0.219 5.6 19.68 29.48 B to X80
8.625 219.1 0.250 6.4 22.38 33.57 B to X80
8.625 219.1 0.281 7.1 24.92 37.12 B to X80
8 5/8 8.625 219.1 0.312 7.9 27.73 41.14 B to X80
8.625 219.1 0.323 8.2 28.58 42.65 B to X80
8.625 219.1 0.344 8.7 30.45 45.14 B to X80
8.625 219.1 0.375 9.5 33.07 45.14 B to X80
8.625 219.1 0.406 10.3 35.61 53.04 B to X80
8.625 219.1 0.437 11.1 38.33 56.94 B to X80
8.625 219.1 0.500 12.7 43.43 64.64 B to X80
8.625 219.1 0.562 14.3 48.44 72.22 B to X52
10.750 273.1 0.157 4.0 17.67 26.54 B to X80
10.750 273.1 0.173 4.4 19.57 29.16 B to X80
10.750 273.1 0.188 4.8 21.23 31.76 B to X80
10.750 273.1 0.205 5.2 22.89 34.35 B to X80
10.750 273.1 0.219 5.6 24.65 36.94 B to X80
10.750 273.1 0.250 6.4 28.06 42.09 B to X80
10.750 273.1 0.281 7.1 31.23 46.57 B to X80
10.750 273.1 0.312 7.9 34.69 51.67 B to X80
10 3/4
10.750 273.1 0.323 8.2 35.96 53.57 B to X80
10.750 273.1 0.344 8.7 38.27 56.72 B to X80
10.750 273.1 0.375 9.5 41.46 61.76 B to X80
10.750 273.1 0.406 10.3 44.82 66.75 B to X80
10.750 273.1 0.437 11.1 48.28 71.72 B to X80
10.750 273.1 0.500 12.7 54.79 81.55 B to X80
10.750 273.1 0.562 14.3 61.21 91.26 B to X80
10.750 273.1 0.625 15.9 67.65 100.85 B to X80

22 23
 HFW Pipe Line Pipe
Nominal Size Outside Diameter Wall Thickness Plain-end Wpe Nominal Size Outside Diameter Wall Thickness Plain-end Wpe
Steel Grade Steel Grade
NPS (in) mm (in) mm (Ib/ft) kg NPS (in) mm (in) mm (Ib/ft) kg
12.750 323.9 0.188 4.8 25.36 37.77 B to X80 20.000 508.0 0.250 6.4 52.78 79.16 B to X80
12.750 323.9 0.205 5.2 27.23 40.87 B to X80 20.000 508.0 0.281 7.1 59.23 87.70 B to X80
12.750 323.9 0.219 5.6 29.34 43.96 B to X80 20.000 508.0 0.312 7.9 65.66 97.43 B to X80
12.750 323.9 0.250 6.4 33.41 50.11 B to X80 20.000 508.0 0.323 8.2 67.86 101.07 B to X80
12.750 323.9 0.281 7.1 37.46 55.47 B to X80 20.000 508.0 0.344 8.7 72.28 107.12 B to X80
12.750 323.9 0.312 7.9 41.48 61.56 B to X80 20.000 508.0 0.375 9.5 78.67 116.78 B to X80
12.750 323.9 0.323 8.2 57.48 63.84 B to X80 20.000 508.0 0.406 10.3 85.04 126.41 B to X80
12 3/4 12.750 323.9 0.344 8.7 45.62 67.62 B to X80 20 20.000 508.0 0.437 11.1 91.59 136.01 B to X80
12.750 323.9 0.375 9.5 49.61 73.65 B to X80 20.000 508.0 0.500 12.7 104.23 155.12 B to X80
12.750 323.9 0.406 10.3 53.57 79.65 B to X80 20.000 508.0 0.562 14.3 116.78 174.10 B to X80
12.750 323.9 0.437 11 .1 57.65 85.62 B to X80 20.000 508.0 0.625 15.9 129.45 192.95 B to X80
12.750 323.9 0.500 12.7 65.48 97.46 B to X80 20.000 508.0 0.688 17.5 142.03 211.69 B to X80
12.750 323.9 0.562 14.3 73.22 109.18 B to X65 20.000 508.0 0.750 19.1 154.34 230.27 B to X65
12.750 323.9 0.625 15.9 81.01 120.76 B to X60 20.000 508.0 0.810 20.6 166.56 247.60 B to X60
12.750 323.9 0.688 17.5 88.71 132.23 B to X60 20.000 508.0 0.866 22.2 178.89 265.95 B to X60
14.000 355.6 0.188 4.8 27.88 41.53 B to X80 20.866 530.0 0.250 6.4 55.48 82.64 B to X80
14.000 355.6 0.205 5.2 29.94 44.93 B to X80 20.866 530.0 0.281 7.1 61.47 91.55 B to X80
14.000 355.6 0.219 5.6 32.26 48.33 B to X80 20.866 530.0 0.312 7.9 68.29 101.71 B to X80
14.000 355.6 0.250 6.4 36.75 55.11 B to X80 20.866 530.0 0.323 8.2 70.84 105.51 B to X80
14.000 355.6 0.281 7.1 41.21 61.02 B to X80 20.866 530.0 0.344 8.7 75.09 111.84 B to X80
14.000 355.6 0.312 7.9 45.65 67.74 B to X80 20.866 530.0 0.375 9.5 81.86 121.94 B to X80
14.000 355.6 0.323 8.2 47.17 70.25 B to X80 20.866 530.0 0.406 10.3 88.62 132.00 B to X80
14 14.000 355.6 0.344 8.7 50.22 74.42 B to X80 Non-API 20.866 530.0 0.437 11.1 95.36 142.04 B to X80
14.000 355.6 0.375 9.5 54.62 81.08 B to X80 20.866 530.0 0.500 12.7 108.77 162.01 B to X80
14.000 355.6 0.406 10.3 59.00 87.71 B to X80 20.866 530.0 0.562 14.3 122.09 181.86 B to X80
14.000 355.6 0.437 11.1 63.50 94.30 B to X80 20.866 530.0 0.625 15.9 135.33 201.58 B to X80
14.000 355.6 0.500 12.7 72.16 107.39 B to X80 20.866 530.0 0.688 17.5 148.49 221.17 B to X80
14.000 355.6 0.562 14.3 80.73 120.36 B to X65 20.866 530.0 0.750 19.1 161.56 240.64 B to X65
14.000 355.6 0.625 15.9 89.36 133.19 B to X60 20.866 530.0 0.810 20.6 173.73 258.77 B to X60
14.000 355.6 0.688 17.5 97.96 145.92 B to X60 20.866 530.0 0.866 22.2 186.64 278.00 B to X60
16.000 406.4 0.219 5.6 34.28 55.35 B to X80 22.000 559.0 0.250 6.4 58.13 87.21 B to X80
16.000 406.4 0.250 6.4 42.09 63.13 B to X80 22.000 559.0 0.281 7.1 65.24 96.63 B to X80
16.000 406.4 0.281 7.1 47.22 69.91 B to X80 22.000 559.0 0.312 7.9 72.34 107.36 B to X80
16.000 406.4 0.312 7.9 52.32 77.63 B to X80 22.000 559.0 0.323 8.2 74.78 111.39 B to X80
16.000 406.4 0.323 8.2 54.06 80.53 B to X80 22.000 559.0 0.344 8.7 79.64 118.06 B to X80
16.000 406.4 0.344 8.7 57.57 85.32 B to X80 22.000 559.0 0.375 9.5 86.69 128.73 B to X80
16.000 406.4 0.375 9.5 62.64 92.98 B to X80 22.000 559.0 0.406 10.3 93.72 139.37 B to X80
16
16.000 406.4 0.406 10.3 67.68 100.61 B to X80 22 22.000 559.0 0.437 11.1 100.96 149.97 B to X80
16.000 406.4 0.437 11.1 72.86 108.20 B to X80 22.000 559.0 0.500 12.7 114.92 171.09 B to X80
16.000 406.4 0.500 12.7 82.85 123.30 B to X80 22.000 559.0 0.562 14.3 128.79 192.08 B to X80
16.000 406.4 0.562 14.3 92.75 138.27 B to X80 22.000 559.0 0.625 15.9 142.81 212.95 B to X80
16.000 406.4 0.625 15.9 102.72 153.11 B to X80 22.000 559.0 0.688 17.5 156.74 233.68 B to X80
16.000 406.4 0.688 17.5 112.62 167.83 B to X65 22.000 559.0 0.750 19.1 170.37 254.30 B to X65
16.000 406.4 0.750 19.1 122.48 182.43 B to X60 22.000 559.0 0.810 20.6 183.92 273.51 B to X60
16.772 426.0 0.219 5.6 38.98 58.06 B to X60 22.000 559.0 0.866 22.2 197.60 293.87 B to X60
16.772 426.0 0.250 6.4 44.46 66.23 B to X80 24.000 610.0 0.281 7.1 71.25 105.56 B to X80
16.772 426.0 0.281 7.1 49.24 73.35 B to X80 24.000 610.0 0.312 7.9 79.01 117.30 B to X80
16.772 426.0 0.312 7.9 54.69 81.46 B to X80 24.000 610.0 0.323 8.2 81.70 121.69 B to X80
16.772 426.0 0.323 8.2 56.72 84.49 B to X80 24.000 610.0 0.344 8.7 86.99 129.00 B to X80
16.772 426.0 0.344 8.7 60.11 89.53 B to X80 24.000 610.0 0.375 9.5 94.71 140.68 B to X80
16.772 426.0 0.375 9.5 65.51 97.58 B to X80 24.000 610.0 0.406 10.3 102.40 152.32 B to X80
Non-API
16.772 426.0 0.406 10.3 70.89 105.59 B to X80 24.000 610.0 0.437 11.1 110.32 163.93 B to X80
24
16.772 426.0 0.437 11.1 76.25 113.58 B to X80 24.000 610.0 0.500 12.7 125.61 187.06 B to X80
16.772 426.0 0.500 12.7 86.91 129.45 B to X80 24.000 610.0 0.562 14.3 140.81 210.07 B to X80
16.772 426.0 0.562 14.3 97.48 145.19 B to X80 24.000 610.0 0.625 15.9 156.17 232.94 B to X80
16.772 426.0 0.625 15.9 107.96 160.81 B to X80 24.000 610.0 0.688 17.5 171.45 255.69 B to X80
16.772 426.0 0.688 17.5 118.36 176.30 B to X65 24.000 610.0 0.750 19.1 186.41 278.32 B to X65
16.772 426.0 0.750 19.1 128.68 191.66 B to X60 24.000 610.0 0.810 20.6 201.28 299.41 B to X60
18.000 457.0 0.250 6.4 47.44 71.12 B to X60 24.000 610.0 0.866 22.2 216.31 321.79 B to X60
18.000 457.0 0.281 7.1 53.23 78.77 B to X80 26.000 660.0 0.281 7.1 77.26 114.31 B to X80
18.000 457.0 0.312 7.9 58.99 87.49 B to X80 26.000 660.0 0.312 7.9 85.68 127.04 B to X80
18.000 457.0 0.323 8.2 60.93 90.76 B to X80 26.000 660.0 0.323 8.2 88.49 131.80 B to X80
18.000 457.0 0.344 8.7 64.93 96.18 B to X80 26.000 660.0 0.344 8.7 94.35 139.73 B to X80
18.000 457.0 0.375 9.5 70.65 104.84 B to X80 26.000 660.0 0.375 9.5 102.72 152.39 B to X80
18.000 457.0 0.406 10.3 76.36 113.46 B to X80 26.000 660.0 0.406 10.3 111.08 165.02 B to X80
18 18.000 457.0 0.437 11.1 82.23 122.05 B to X80 26.000 660.0 0.437 11.1 119.69 177.62 B to X80
26
18.000 457.0 0.500 12.7 93.54 139.15 B to X80 26.000 660.0 0.500 12.7 136.30 202.72 B to X80
18.000 457.0 0.562 14.3 104.76 156.11 B to X80 26.000 660.0 0.562 14.3 152.83 227.70 B to X80
18.000 457.0 0.625 15.9 116.09 172.95 B to X80 26.000 660.0 0.625 15.9 169.54 252.55 B to X80
18.000 457.0 0.688 17.5 127.32 189.67 B to X80 26.000 660.0 0.688 17.5 186.16 277.27 B to X80
18.000 457.0 0.750 19.1 138.30 206.25 B to X65 26.000 660.0 0.750 19.1 202.44 301.87 B to X65
18.000 457.0 0.810 20.6 148.84 221.70 B to X60 26.000 660.0 0.810 20.6 218.64 324.81 B to X60
18.000 457.0 0.866 22.2 37.25 238.05 B to X60 26.000 660.0 0.866 22.2 235.01 349.16 B to X60

24 25
 Production & Sales Network

Sales & Service Center Production Sites

Tianjin Pipe International Economic & Trading Corporation Van Leeuwen TPCO Pipe And Tube Moscow Office Of Tianjin Pipe International Economic Tianjin Pipe (Group) Corporation
Address: W4-5AB 51#, 3rd Avenue, TEDA, Tianjin P.R. China Address: 12E Double Dove Plaza, 438 Pu Dian Road, And Trading Corporation Address: No.396, Jintang Road, Dongli District, Tianjin,
P.C.: 300457 Shanghai, 200122, P.R. China Address: 143441, Moscow region, Krasnogorsk district, 69 km P.R. China
Tel.: 0086-22-6628-0988 Tel.: 0086-21-6104-2880 MKAD, the International Trade Fair Grounds, "Greenwood", Tel.: 0086-22-6628-0988
Fax: 0086-22-6628-2951 Fax: 0086-21-6104-2881 the case 17-1, office 948 Fax: 0086-22-6628-2951
Email: [email protected] Tel.: +7-495-9953716
Fax: +7-495-9953716
TPCO Enterprise Inc. Tianjin Pipe Korea Liaison Office PT TPCO Pan Asia (Batam Plant)
Email: [email protected]
Address: 10700 Richmond Ave, Suite 302, Houston Texas 77042 U.S.A. Address: 1620 East Wing, hanshin Cylux 716 Address: Jalan Pattimura Kel. Kabil, Kec. Nongsa
Tel.: 001-713-266-2699 Suseo-dong Kangnam-ku Seoul Korea 135-560 Batam 29467, Indonesia
Fax: 001-713-266-2697 Tel.: 0082-2-21499911 Tel.: (62) 778 711 199
Email: [email protected] Fax: 0082-2-21499912 Fax: (62) 778 711 399
Email: [email protected]

PT. TPCO PAN ASIA (Jakarta Office) TPCO Pan Asia Pte Ltd. Tubular Products Services Co., Ltd. Jiangsu Tianhuai Pipe Corporation
Address: Sahid Office Boutique Unit A 1st Floor Komplek Hotel Sahid Address: 108 Pasir Panjang Road #04-12 Golden Agri Address: No.999/9 The Offices at Centralworld, 29th Floor, Room Address: No.69, Hanhou Road, Huaian City, Jiangsu
Jaya Jalan Jendral Sudirman Kav.86 Jakarta 10220, Indonesia Plaza Singapore 118535 No.2980T, RamaⅠRoad, Kwaeng Pathumwan, Khet Pathumwan, Province, P.R. China
Tel.: +62-21-5785 1867 Tel.: +65-66909166 Bangkok, 10330 Tel.: 0086-517-83850681
Fax: +62-21-5785 1868 Fax: +65-67526208 Tel.: +66 0 2 107 0041 Fax: 0086-517-83850678
Email: [email protected] Email: [email protected] Fax: +66 0 2 107 0042
Email: [email protected]
Tianjin Pipe Corp. ( Middle East ) Ltd. Genertec Europe Temax GmbH TPCO America Corporation (Under Construction)
Address: 17537 Jebel Ali Free Zone, Dubai, U.A.E. Address: Emil-Hoffmann-Str.1a, D-50996 Koln, Germany Address: 800 N. Shoreline Blvd, Suite 1220 N Corpus
Tel.: 00971-4-8833-799 Tel.: 0049-2236-3970-89 Christi, TX 78401
Fax: 00971-4-8833-899 Fax: 0049-2236-397099/91 Tel.: (361) 885-7880
Email: [email protected] Email: [email protected] Fax: (361) 885-7862

26 27