Scribd
Upload
88 views7 pages

Wireless Section Practice

The document contains review problems for a wireless communications systems course covering topics such as modulation, antennas, propagation, analog to digital conversion, and electronic warfare. It includes 16 multiple choice or short answer questions testing understanding of concepts like modulation index, antenna beamwidth, sampling rate, digital modulation techniques, and calculating signal to jammer ratios.

Uploaded by

Abdulrahman behiry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
88 views7 pages

Wireless Section Practice

The document contains review problems for a wireless communications systems course covering topics such as modulation, antennas, propagation, analog to digital conversion, and electronic warfare. It includes 16 multiple choice or short answer questions testing understanding of concepts like modulation index, antenna beamwidth, sampling rate, digital modulation techniques, and calculating signal to jammer ratios.

Uploaded by

Abdulrahman behiry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

EC310 Review problems

Wireless section Practice


– Intro to Communications Systems
1. Describe the main purpose of any communication system.

2. In music, a pure C6 tone is defined as having a frequency of 1046.50Hz.


Assuming that it has zero phase offset and an amplitude of 2volts:
a) Write the mathematical formula for the sinusoid of this tone.

b) Sketch the time domain diagram for this tone, labeling all significant parts.

c) Sketch the frequency domain diagram for this tone.


EC310 Review problems

– Intro to Modulation

3. From the pictured AM Radio Signal in which Vmax is 10V, Vmin is 2V, fc is
1000KHz, and fm is 5KHz, determine:

(a) Vm _________

(b) Vc __________

(c) m, the modulation index _________

(d) flsb ____________________

(e) fusb ___________________

(f) Vlsb ___________________

(g) Vusb __________________

(h) BWAM ___________________

4. An Emergency Action Message must be sent to a submarine at sea at a frequency of


30KHz. How long of a quarter-wavelength wire must the submarine stream behind
it in order to best receive the message? Include units!
EC310 Review problems

– Signal Gain and dB


5. An amplifier has an output of 25W. What is its gain both in dBm and dBW?

6. Given the following system, what is the minimum required signal power (Pin) to
achieve the desired Signal to Noise ratio?

SNR = 29dB
Pin -18 dB
Pn = 7nW

7. The SNR of a system is 20dB and signal power is 4.5W, determine noise power.

–Antennas

8. What are the advantage(s) of a directional antenna vs a (theoretical) isotropic


radiator? Check any that apply.
a) For the same power, directional allows communication over longer distances vs
isotropic.
b) With less power, directional can communicate same distance as isotropic.
c) Directional antennas require fewer parts than an isotropic antenna.
d) Directional antennas fit more easily onto Humvees than isotropic antennas.
EC310 Review problems

9. Use the radiation pattern to answer the follow-on questions about this antenna:

a. What is the beamwidth of this antenna?

b. What is the Side Lobe Level with respect to the side lobe positioned at 90o?

c. If this antenna has a gain of 9dBi and is transmitting at a power of 10W, what is
the EIRP for this antenna?

d. For the yagi antenna associated with this radiation pattern, the center frequency is
400Mhz. What is the physical size of the driven element of the yagi antenna?
EC310 Review problems

– Propagation

10. If someone is standing in a life raft with a hand-held VHF radio (assume antenna
height of 6 ft), what is the maximum range from which they could contact a search
and rescue helicopter flying 100 ft above the surface?

11. Your cell phone transmits at a power level of 500 mW, and an antenna gain of 2.0
dB. The cell tower has an antenna gain of 8.0 dB, and for LTE, you’re transmitting
at 700 MHz.
How far from the tower could you be while maintaining the capability to
communicate? (Cellular “dead zone” occurs when Pr < -110dBm.)
EC310 Review problems

– Analog to Digital Conversion

12. For the signal given by the formula


v(t) = 10Vsin(2 π 450t) + 3Vsin(2 π 600t + 300o) + 7Vsin(2π1100t):

a. What is the minimum sampling rate that could be used to transmit this signal
digitally such that a receiver could accurately reconstruct the signal?

b. If the signal were mapped by a 5-bit quantizer with a resolution of 1V, what
would this imply is the minimum voltage found in the waveform?

c. Given your above answer, what bitstream would be generated by the


sampled point (2.5s, -11.6V)?

d. If a receiver was decoding the incoming bitstream of 10100, what voltage


level would be recovered?

13. Which action below will reduce the effects of quantization error?

a. Use AM instead of FM
b. Use less bits per sample in your A/D converter
c. Increase the size of the quantization intervals
d. Use more bits in your A/D converter

–Digital Modulation

14. What Modulation Techniques are combined in Quadrature Amplitude


Modulation?
EC310 Review problems

15. Given the following time domain graph of an FSK signal:

Using your best guesstimate- What is fL? ; What is fH ? Show your work.

– Electronic Warfare

16. You are located 5500 meters from the omnidirectional receiver you are
jamming. The transmitted signal you are jamming originates 3000 meters from
the receiver. The signal transmitter’s EIRP is 14.5 dBW. Assuming both the
transmitter and jammer have line of sight, your jammer EIRP of 44W will allow
you to jam the receiver with what J/S ratio?

You might also like