UTC PC1353 LINEAR INTEGRATED CIRCUIT

TV AUDIO PROCESSING CIRCUIT

DESCRIPTION
UTC PC1353 is designed for TV SIF signal amplification
and audio power amplification purpose. It includes SIF
amplifier, FM, frequency discriminator, DC volume control,
2.4W power amplifier and voltage regulator.

FEATURES
* Wide operating supply voltage,9V ~ 18V
When VCC=18V,RL=8Ω,Output is 2.4W(17"TV)
When VCC=12V,RL=8Ω,Output is 1.2W(12"TV)
* Linear volume control
* Low harmonic distortion
* Differential peak detector
DIP-14H
* Attenuation circuit for noise suppression(Typical80dB)

APPLICATION CIRCUIT
RB Vcc
100 µF

0.01 µF
IF discreminator 220 µF
Deweighting
output
IF power
0.015 µF 4.7 µF input

3 4 7 5
22kΩ

Volume VR IF voltage
14 attenuator
control 5kΩ regulation
Power for
0.1 µF

270Ω audio output

10
Bootstrap
12 9
IF amplifier Frequency 100 µF
Input Mute
limiter discreminator
Power AMP
coil 13 output 8
330 µF
0.022 µF

22Ω
TAB 1 2 6 11
470pF
FM 10pF
100 µF

47 µF
discreminator
coil Negative
Feedback
Decoupling

Fig 1

UTC UNISONIC TECHNOLOGIES CO., LTD. 1

QW-R111-002,A
UTC PC1353 LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATING(Ta=25°C)
PARAMETER SYMBOL VALUE UNIT
Input Voltage(pin 10) V10 20 V
Input Current(pin10) I10 1 A
Input Current(pin5) I5 100 mA
Signal Voltage Input VI 3 VP-P
Power Dissipation PD1 0.8(Ta=75°C)Free air W
Power Dissipation PD2 1.4* W
Operating Temperature TOPR -20 ~ +75 °C
Storage Temperature TSTG -40 ~ +150 °C
*Area of copper pattern on PCB 50 x 50(mm)2

ELECTRICAL CHARACTERISTICS(Ta=25°C)
1.TYPICAL CHARACTERISTICS
PARAMETER SYMBOL TEST CONDITIONS VALUE UNIT
Current for Pin 10 I10 THD2A=10% 200 ~ 210 mA
Current for Pin 10 I10 THD2B=10% 270 ~ 280 mA
Audio Output Power POA THD=3% 1.1 W
Audio Output Power POB VCC=18V,RB=330Ω,THD=3% 2.0 W
Bandwidth for Audio fS -3dB 50 ~ 50K HZ
Stage

2. IF AMPLIFIER(VCC=12V,RB=100Ω,V14>=1.3V,fO=6.5MHZ,fm=400HZ,f=25KHZ,RG=50Ω)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Pin 5 Voltage V5A 7.5 8.0 8.5 V
Pin5 Voltage V5B VCC=18V,RB=330Ω 7.5 8.0 8.5 V
Pin10 Current I10A No input signal 14 19 24 mA
Pin10 Current I10B VCC=18V,RB=330Ω 16 28 35 mA
No input signal
IF limiter Voltage VLIM VOAF(Vi=10mVrms)= -3dB 200 400 µ Vrms
Discriminator Output VOAF Vi=10mVrms 300 360 mVrms
Voltage
Discriminator Distortion THD1 Vi=10mVrms 0.7 %
AM rejection ratio AMR Modulation 30% fm=400HZ -40 -50 dB
Vi=10mVrms
Maximum attenuation VATT V14=0V -60 -80 dB

UTC UNISONIC TECHNOLOGIES CO., LTD. 2

QW-R111-002,A
UTC PC1353 LINEAR INTEGRATED CIRCUIT

3.AUDIO POWER AMPLIFIER(VCC=12V,RB=100Ω,RL=8Ω,f=400HZ,RG=600Ω)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Voltage Gain GVAF Vi=30mVrms 33 37 41 dB
Output Power POA THD=10% 0.9 1.2 W
Output Power POB VCC=18V,RB=330Ω 2.0 2.4 W
THD=10%
Distortion THD2A PO=0.5W 0.6 2.0 %
Distortion THD2B VCC=18V,RB=330Ω 0.5 2.0 %
PO=0.5W
Total Distortion(IF+Audio) THD3 PO=0.5W v 1.5 4.0 %
Vi=10mVrms

TEST CIRCUIT

47 µF 47 µF

S3 S4
Audio signal KF VV
600Ω VV Amp
f=400Hz
47 µF
VV
47 µF 100 µF Gain?60dB

0.015 µF
3 7 4 11 6 DCM Vcc
S1 0.01 µF 12V or 18V
220 µF
12 10 I10
IF signal
f=6.5MHz RG=50Ω 330 µF
UTC PC1353 8
13
RL=8Ω
100 µF

0.022 µF KF VV
9
TAB 1 2 14 5
RB
I5
VV AC voltmeter 22kΩ
0.01 µF

V5
100 µF

220 µF
5kΩ
Distortion S2
KF 10pF
meter DVM
0.1 µF

DVM V1 V14

RB : Vcc 12V:100Ω
Vcc 18V:330Ω

Fig 2

UTC UNISONIC TECHNOLOGIES CO., LTD. 3

QW-R111-002,A
UTC PC1353 LINEAR INTEGRATED CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTICS

Power supply curve Total distortion curve

25 20
18
f=1kHz
20 16
Vcc=12V
Power supply current

14

Total distortion
15 12
Icc (mA)

THD2 (%)
10

10 8

6 f=1kHz
Vcc=18V
5 4

0 0
0 2 4 6 8 10 12 14 16 18 20 0.5 1.0 1.5 2.0 2.5
Power supply voltage
Output power? Po(W)
Vcc (V)

Audio amplifier frequency response

Detector output curve
500
curve
Vcc=12V
Vi=30mVrms
400 0
Detector output voltage? Vout

-1
Attenuation? (dB)

300 -2
(mVrms)

-3

200 Vcc=12V -4
fo=6.5MHz
100%FM -5
30%AM
fm=400Hz -6
100
f=+25kHz
Vi=10mVrms -7
0
2 3 4 5 6 2 3 4 5
10 10 10 10 10 10 10 10 10 10
Input voltage? Vi Frequency
(µVrms) (Hz)

Audio power output curve Power dissipation curve

5 3
PCB thickness t=1.5mm
Copper thickness
4 f=1kHz t=30µm
V=18V
THD=10%
Output power Po(W)

dissipation

2
PD(W)
Power

3
50x50(mm)2
V=12V
2 THD=10%
1
Free air
1

0 0
10 100 1000 0 50 100 150
Input power Viaf(mVrms) Ambient temperature
Ta(°C)

UTC UNISONIC TECHNOLOGIES CO., LTD. 4

QW-R111-002,A
UTC PC1353 LINEAR INTEGRATED CIRCUIT

UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.

UTC UNISONIC TECHNOLOGIES CO., LTD. 5

QW-R111-002,A