Dr.

Fixit Raincoat Waterproof Coating

Coatings & Paints

U N I V E R S A L E l ast o m eric E X T E R I O R W A T E R P R OO F
C O AT I N G

Description
Dr. Fixit Raincoat Waterproof Coating is composed of high quality emulsion polymer, weather durable
pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective
coating for exterior walls of the buildings.
643 Dr. Fixit Raincoat Waterproof Coating

Typical Applications
}}All types of exterior masonry surfaces, concrete, cement sand renderings, etc.
}}Applicable on cement sheets.

Features
}}Flexible covers hairline cracks (up to 0.5 mm) effectively, thus prevents ingress of water.
}}Toughness – Tough film withstands wind driven rain.
}}Ready to use – No dilution is required.

}}Breathability – Permeable to water vapour.

}}Ease of application – User friendly, easily applicable by brush, roller or spray.

}}Non toxic – Eco Friendly.

}}Primer – Can act as a primer cum waterproofing coating for all water based exterior paints.

}}Can be tinted with universal tinter to get pastel shades

Packaging
1, 4, 10 & 20 ltr

Method of Application

1 S urface P reparati o n
}}All new cement-sand renderings /concrete surfaces should be allowed to age minimum 28 days before
surface coating. Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease,
etc. by mechanical means such as wire brushing. Treat any areas affected by Algae,moss or fungal growth
with biocide wash solution. All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X.
Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP modified
mortar or as specified.
2 P ri m in g
}}After the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in
saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water (2
parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat
application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs.
3 A pp l icati o n
}}Use Dr. Fixit Raincoat Waterproof Coating directly from the container. Stir contents well before use.
}}Apply one coats of Dr. Fixit Raincoat Waterproof Coating without dilution by brush or roller for rain lashing
walls at the thickness of 120 – 130 microns.

2. Dr. FIXIT RAINCOAT WATERPROOF COATING

1 . S urface preparati o n fo r pre v i o us ly painted surfaces :

}}Existing substrates must be cleaned to remove all dirt, mildew and other contaminants. Treat any areas
affected by Algae, moss or fungal growth with biocide wash solution. This is accomplished by pressure-
cleaning equipment with a minimum capability of 100-140 bar water pressure. All grease, oils and asphalt
materials must be removed completely.
140

643 Raincoat WF Coating 13/2/18

 Coatings & Paints
}}In repainting Dr. Fixit Primeseal can be eliminated based on existing paint condition.
2 . R epaintin g app l icati o n
}}The performance of Raincoat Waterproof Coating will depend upon the condition of the existing paint. If the
existing paint film is flaking or has a weak bonding with the substrate then the subsequent coat of Raincoat
Waterproof Coating will face the adhesion problem.
}}For a repainting work apply one coats of Dr. Fixit Raincoat Waterproof Coating without any dilution maintain

the spreading rate of 3.5 -4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. After

643 Dr. Fixit Raincoat Waterpoof Coating

the coat dries apply 1 to 2 coats of any water based exterior paint over the Raincoat waterproof coating.

Precautions & Limitations

}}Do not dilute.
}}‘In case of fresh painting’ Recommended to be primed with Dr. Fixit Primeseal
}}Do not apply when ambient temperature is below 10 o C or above 35o C.

}}Do not apply in direct sunlight or during rains.

}}Adhesion property may get affected over putty and very smooth surfaces.

}}If the surface has excess moisture then there is possibility of blister formation in case of all liquid applied

membrane coatings.

Technical Information

PROPERTIES SPECIFICATION RESULTS

Nature Single component

Appearance Emulsion (available in White)
PH 8.0 – 9.0
Specific gravity 1.35-1.41
Solid content % 60-64
Elongation % ASTM D 412-02 Min 100%
Water resistance ASTM D 471 passes
Water absorption SS 500 passes
Water vapour transmission SS 500 passes
Tensile strength ASTM D 412-02 2 N/mm2
Adhesion strength, ASTM D 4541 Min 1 N/mm2
Coating thickness 130-150 micron

Theoretical Coverage*
Dr. Fixit Primeseal Primer : 8-10 sq mtr per litre for a single coat
Dr. Fixit Raincoat Waterproof Coating : 3.5-4.0 sq mt per litre.
141
 Coatings & Paints

*Coverage may vary depending upon the texture and porosity of the surface

Shelf Life
Shelf life is 36 months from the date of manufacturing if stored in original and unopened packaging in a cool
dry place away from direct sunlight.

Health & Safety

643 Dr. Fixit Raincoat Waterpoof Coating

}}Skin Contact: Wash skin with soap & water. Remove contaminated clothes.
}}On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists.
}}Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a Physician.

Other Products Categories available

Dr. Fixit brings you the widest range of Construction Chemicals

Pidilite Industries Limited DISCLAIMER The product information & application details given by the company
Construction Chemicals Division & its agents has been provided in good faith & meant to serve only as a general
Ramkrishna Mandir Road, Post Box No. 17411 guideline during usage. Users are advised to carry out tests & take trials to ensure on
the suitability of products meeting their requirement prior to full scale usage of our
Andheri (E) Mumbai 400059 INDIA
products. Since the correct identification of the problems, quality of other materials
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
used and the on-site workmanship are factors beyond our control, there are no
www.drfixit.co.in • [email protected] expressed or implied guarantee / warranty as to the results obtained. The company
Dr. Fixit Advice Centre (Toll Free No.) 1800 209 5504 does not assume any liability or consequential damage for unsatisfactory results,
142

arising from the use of our products.