HS500 User Manual.V110.en

HS500 User Manual V1.
10
HS-500
ARL-500 REMOTE ACCESS TERMINAL
USER MANUAL
HS500 User Manual V1.10
Publisher ARKEL Elektrik Elektronik San. ve Tic. A.Ş.

Eyüp Sultan Mah. Şah Cihan Cad. No:69 Sancaktepe/Istanbul 34885 TURKIYE
TEL: +90(216) 540 67 24-25
Fax: +90(216) 540 67 26
E-mail : [email protected]
www.arkel.com.tr
Date of issue 11.2020
Document version V1.10
This document has been created to be a guide for Arkel customers. Reproduction, transfer, distribution or storage of part or all
of the contents in this document in any form without the prior written permission of Arkel is prohibited. Arkel reserves the
right to make changes and improvements to any of the products described in this document without prior notice.
Arkel is not responsible for those mistakes that may be found in this manual and for the damages that they may cause.
1. GENERAL DESCRIPTION
The HS500(ARL Universal Keypad) is a handheld terminal which can be connected to the system from any point on the
CANbus (in the car, on the car top, at landings or from control panel), in a way, enables you to operate all control functions of
the ARL-500 controller for installation and maintenance independent of location.
2. OVERVIEW
The HS500’s user interface consists of 9-key keypad and 128x64 pixel graphic LCD. 6 keys are used for remote operating of
ARL-500 controller in the same way as keypad on ARL-500 controller. The other 3 keys (F1, F2, F3) are additional function
keys and reserved for future using.
128x64 pixel resolution graphic LCD

(same with ARL-500 main controller)
Reserved function keys F1, F2, F3

have no function for this version
6-key keypad (Keys have same functions

with ARL-500 main controller)
1.5m portable cable
CANbus socket ARL-500 keypad
After connecting the HS500 to the system, ARL-500 controller’s menu is shown simultaneously on handheld terminal display.
In this way, the elevator system can be operated by keypad & menu simultaneously on ARL-500 controller and on ARL
Universal Keypad.
3. CONNECTION POSSIBILITIES OF HS500

HS500 handheld terminal can be connected to the system via CANbus in the car, on the car top, at landings or from control
panel.
Connection on the car top
ARL Universal Keypad can be connected to CANbus plug on the REVKON car top controller in
inspection box.
Connection in the car (via COP)

ARL Universal Keypad can be connected to CANbus plug on the KABKON car panel control module
or car indicator module in car operating panel.
Connection at the landings (via LOPs)

ARL Universal Keypad can be connected to the CANbus plug on the landing call/indicator modules in
landing operating panels.
Connection in the shaft

ARL Universal Keypad can be connected to the CANbus plug on KXCBA CANbus connector board in shaft
CANbus line.
Connection from control panel

ARL Universal Keypad can be connected to the CANbus plug on KXCBA CANbus connector board in the
control panel.
4. KEYPAD OPERATION
The ARL-500 controller is operated by using 6-key keypad. The basic functions of keys according to screen are described
in the tables below. A detailed description of the operation as well as the menu navigation is explained in the
programming manual of the ARL-500.
Key functions in the main screen
or To previous/next monitoring screens
Open service options screen
Open manual command screen
Open main menu
Back to main screen
+ Open manual motion screen
Key functions in the main menu

or To previous/next submenu
To next menu item
Increase value
To previous menu item
Decrease value
Select submenu/menu item
Exit submenu/menu item
Key functions in the manual motion screen

Inspection drive Up
Inspection drive Down
Back to main screen
Key functions in the car command entry screen

Change car command number
Set in/reset car command to a number
Back to main screen
5. REMOTE OPERATING the ADrive

Before this remote operation, a cable connection must be done between the ARL-500 controller and the ADrive Inverter.
This connection is described in the operation manual of the ARL-500.
After connecting the HS500 to the system, it automaticaly detects the communication and the status screen “ADrive
screen” will be available on the display.
Press LEFT key on main screen in order to activate the “ADrive screen” and so the display of the ADrive inverter is simulated
on the ARL-500 display. It is one of the status screens and can be switched by LEFT/RIGHT keys.
In this screen first you have to select the usage of keypad either commanding to the ARL-500 or ADrive. When activating
“6. ADrive screen” the keypad still operates the ARL-500 and it must be changed to ADrive.
Press UP+DOWN keys simultaneously on this screen in order to enable operating ADrive by keypad. By pressing UP+DOWN
keys the keypad control is switched between ARL-500 and ADrive.
ADrive screen
BUTTONS > ARL500 BUTTONS > ADrive
In this status screen ARL-500 keys have the following functions for operating the ADrive:
ARL-500 key ADrive key
In order to exit this screen you have to set keypad control to ARL-500.
6. REMOTE OPERATING the CT Unidrive SP

Before this remote operation, a communication must be done between the ARL-500 controller and the CT Unidrive SP
Inverter. Also the Unidrive SP must support this communication.
After connecting the HS500 to the system, it automaticaly detects the communication and the status screen “CT Unidrive
Screen” will be available on the display.
First activate the “CT Unidrive Screen“ of ARL-500 controller by pressing or key until this screen appears in the
display (while the controller is in the main screen not in the menu!)
In this screen press and keys together to adjust the ARL500 keypad commanding to CT Unidrive SP. “BUTTONS ->
DRIVER” message must be written on the screen. The menu of CT Unidrive is shown in a window. The parameter number is
written on the up side, and the parameter value is written on the down side.
Parameter code
CT Unidrive Screen
Parameter value
BUTTONS > ARL-500 BUTTONS > Driver
• When the up line (parameter code line) is active:

, keys are used to change a digit before “.” (dot) of parameter number
, keys are used to change a digit after “.” (dot) of parameter number
• “Enter” key is used to set an item or to change between parameter / value / trip
• When the down line (parameter value line) is active:
, keys are used to change the active digit of parameter value
, keys are used to change the value of activated digit of parameter value
• Press and keys together to adjust the ARL-500 keypad commanding back to ARL-500 controller.
• Press “ESC” key to exit this screen.

HS500 User Manual.V110.en

Uploaded by

Copyright:

Available Formats

HS500 User Manual.V110.en

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HS500 User Manual.V110.en

Uploaded by

Copyright:

Available Formats

HS500 User Manual V1.

Publisher ARKEL Elektrik Elektronik San. ve Tic. A.Ş.

Document version V1.10

128x64 pixel resolution graphic LCD

Reserved function keys F1, F2, F3

6-key keypad (Keys have same functions

1.5m portable cable

CANbus socket ARL-500 keypad

3. CONNECTION POSSIBILITIES OF HS500

Connection in the car (via COP)

Connection at the landings (via LOPs)

Connection in the shaft

Connection from control panel

+ Open manual motion screen

Key functions in the main menu

Key functions in the manual motion screen

Key functions in the car command entry screen

5. REMOTE OPERATING the ADrive

BUTTONS > ARL500 BUTTONS > ADrive

6. REMOTE OPERATING the CT Unidrive SP

BUTTONS > ARL-500 BUTTONS > Driver

• When the up line (parameter code line) is active:

You might also like