DS-FGR1-EN / 11.03.

2021

Strawinskylaan 1105 EN
1077 XX Amsterdam, The Netherlands datasheet

FGR1
ROTARY GEAR LIMIT SWITCH

Technical data

Worm screw limit switches FGR series are in conformity Case thermoplastic glass fiber reinforced
with the following standards or other normative Ratio 1:12 - 1:33 - 1:50 - 1:75 - 1:100
documents: - 1:150 - 1:200 - 1:400
EN 60947-1 2007/A1 : 2011/A2 : 2017 Direct ratio 1:50 - 1:75 - 1:100
EN 60947-5-1 2004/A1 : 2009/AC : 2004/AC : 2005 Protection class IP65
EN 60204-1 2006/A1 : 2009 Shaft type - steel
EN 60529 1991/A1 : 2000/A2 : 2013 - double overhang shaft
EN 50581 2012 version available
IEC 63000 2016 Fixing type base
front (flanged version)
and therefore follow the Microswitches up to 4
provision of the Directives: Cam block self-lubricating with transparent
support for easier cam viewing
2014/35/UE Markings Cable entry M20 or M16 (max 4)
2014/33/UE
Temperature - operating: -25 ... +70°C
2011/65/UE
- storage: -30 ... +70°C
2015/863/UE
Options - 5 cam shape options
- 20 pinion options

Microswitch technical data

Operating temperature -25 ... +85°C

Minimum life expectancy mechanical one million of cycles
electrical half million of cycles
Rated thermal current Ith 8A
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 1500 V
Rated operating current le resistive load 8 A - 250 V
inductive load 3 A - 250 V
Pollution degree 2
Protection against electric shock class II

Giovenzana International B.V. reserves the right to change the features and data shown in this document at any time and without notice.
Terminals
This document cannot therefore be considered a contract with third parties. 1/3
The microswitches installed can have one of the three types of terminals illustrated below:
Dimensions

Base fixing

125 94.8

35
Ø 12 h 7

106
71
14

45
11.5 27.3 123 50 16.5
(200.3) 90

10.7
6.2

10
79

Ø 4

103.5

Flanged fixing

140 125 94.8

35
Ø 12 h 7

106
49

71

71
14

45

11.5 27.3 123 50 16.5

120 (200.3) 90

10.7
6.2

10 12
79

Ø 4
6.5

103.5

GIOVENZANA INTERNATIONAL B.V. - DS-FGR1-EN / 11.03.2021 2/3

 Rear shaft

50 125 94.8

35
Ø 12 h 7

Ø 12 h 7

106
71
14

45
11.5 27.3 123 50 16.5
(200.3) 90

10.7
6.2

10
79

Ø 4

103.5

GIOVENZANA INTERNATIONAL B.V. - DS-FGR1-EN / 11.03.2021 3/3