M288 Bass Octave Deluxe: 92503007924revd
M288 Bass Octave Deluxe: 92503007924revd
92503007924revD
M288 BASS OCTAVE DELUXE
DESCRIPTION POWER DIRECTIONS • Rotate the GIRTH knob clockwise SPECIFICATIONS
• Two independent The MXR Bass Octave Deluxe • Run a cable from your guitar to to increase level of smooth, Input Impedance 1 MΩ
sub-octave voices is powered by one 9-volt battery the Bass Octave Deluxe’s INPUT deep sub-octave voice or Output Impedance < 600 Ω
(remove bottom plate to install), jack and run another cable counterclockwise to decrease it. Noise Floor* 85 dB
• MID+ switch adds
mid range boost a 9-volt AC Adapter such as the from the Bass Octave Deluxe’s • Depress MID+ switch to boost
Octave Bandpass
Dunlop ECB003/ECB003EU, or OUTPUT jack to your amplifier. midrange. Frequency and level
• Constant Headroom -3 dB, 8 Hz to 46 Hz
a DC Brick™ power supply. • Start with all controls are both adjustable via internal
Technology™ for exceptional Control Range
at 12 o’clock. slider (up for 850Hz, down for
headroom and tracking Dry -∞ to +2.5 dB
• Turn the effect on by depressing 400Hz) and trim pot (+4dB
• Organic analog tone when fully clockwise, +14dB Girth -∞ to +1 dB
the footswitch. Growl -∞ to +6 dB
• True bypass fully counterclockwise).
• Rotate DRY knob clockwise to
Please see diagram A MID+ Switch**
increase level of dry signal or
DIAGRAM A Gain +4 dB to +14 dB
counterclockwise to decrease it.
CONTROLS Frequency 400 Hz or 850 Hz
• Rotate the GROWL knob 850Hz
MID+ switch adds up to +14dB clockwise to increase level of Bypass True Hardwire
of internally adjustable midrange throaty midrange sub-octave 400Hz
Current Draw 14 mA
(blue LED indicates on) voice or counterclockwise Power Supply 9 volts DC
DRY knob controls volume of to decrease it. *All controls mid position, A-weighted, (VREF = 1 VRMS)
+4dB +14dB
clean bass signal **Internally adjustable