Advances in Intelligent Systems Research, volume 156

7th International Conference on Management, Education and Information (MEICI 2017)

Discussion on Improving Marine Boiler Efficiency on Board

Feifei Li

Marine Engineering Department, Tianjin Maritime College, Tianjin, 300350,

China

Keywords: Marine boiler; Do’s; Don’ts; Boiler efficiency

Abstract. Marine boiler is one of the most important systems on board which is used to produce
steam to drive the main engines or auxiliary machinery. Steam demand is the main criteria of
operating a boiler at a given load for marine boilers. It is of importance that boilers cannot be
overloaded to achieve excessive output and ensure all the parameters are within the safety limits.
Therefore, some important do’s and don’ts must be followed which marine engineers must know on
operating a marine boiler in a safe and efficient manner.

Introduction

On modern society, vessels play a critical role in world’s transportation and high-modernized and
high-automated ships have become the world’s trend. Therefore, the advanced technologies are
used and advanced devices are provided on board. In addition, researchers are more and more
concerning about the environmental protection and resources saving in shipbuilding. With the
recent technical development of shipping industry, ships which are capable of reducing energy
consumption and enhancing the operation efficiency are more popular all around the world. Marine
boiler is such an important application in ship’s engine room that needs special attention,
considering the fact that it supports several other operations and machinery, including the main
engine, auxiliary machinery, etc. Maintaining and improving boiler efficiency requires taking note
of a number of factors, for example, following the correct operating procedures, checking
associated valves and so on. Researches on improving marine boiler efficiency have been received
much more attention in recent years. However, marine boiler may cause severe damage to the safety
of property and even to the human’s lives if it is operated improperly. Crews on board know that the
dangers of high-temperature steam and they must be careful while operating and maintaining the
boilers. According to the reference data, one of the main reasons why such vital accident would
occur is that the improper operating procedures and ignoring the safety precautions. Each of
engineers on board is concerning that all the machinery and systems in engine room can be
available and maximize efficiency without potential safety hazard.

Do’s and Don’ts for Efficient Boiler Operations on Ships

Although it is a device which has the simple internal parts arrangement, it requires highest standards
of safety precautions and correct operating procedures. In order to obtain the highest efficiency,
some do’s and don’ts must be paid attention to operate the boiler correctly. Do’s and don’ts below
are some common ones in boiler operation.
Do’s in Boiler Operation
Operating Procedure
It must be ensured that engineers should follow correct operating procedures when igniting the
boiler from the cold condition. In addition, pre and post purging is very critical for every ignition
and the air vent must be kept open when initially firing and shutting down the boiler.
Checking Important Parts and Systems
To ensure the boiler can function well, a variety of important parts and systems need to be
checked, otherwise, accidents may occur and cause damage to the boilers. Engineers should check
the smoke from the funnel on every watch to gauge the combustion quality of the boiler. Actions
should be taken in the event of abnormal color of smoke. Make sure that various valves and

Copyright © 2017, the Authors. Published by Atlantis Press.

This is an open access article under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/). 907
 Advances in Intelligent Systems Research, volume 156

dampers, e.g. fuel line valves, steam valves and safety valves, are in good order. Quick-closing
valves and safety valves should be correctly operational as well. In addition, one of most important
part needs to be examined is the furnace. Check the furnace for refractory deterioration and fuel
dripping near the burner assembly. If any defect is found, it should be rectified as soon as possible.
Cleaning and Maintaining
In order to make the boiler have a good performance, cleaning and maintaining work is
necessary. Measures mentioned below are some common ones to improve boiler efficiency. Scum
valve should be opened to discharge floating impurities and scum regularly and blow down should
be performed once a day to keep the chloride level minimum. Soot blowers should be used to
perform blowing soot since it can assist to continue the heat exchanging ability of the boiler tubes.
On the other side, soot blowing is a precaution against fire. Lubricating is a good and effective
measure in maintaining the boiler so that all the required parts and connections should be lubricated
and greased at regular intervals. Besides, steam system in boiler is prone to leakages because of
fluctuating steam pressure. It is necessary to attend all the leakages as soon as possible to maintain
the efficiency at all times.
Safety Precautions
For the safety reason, it is essential for the engineers to know the safety measures which mostly
described in the company Safety Management System. For example, emergency shut down of the
boiler, which is located in the ECR, should be checked whether it is functional or not. Marine boiler
is oil-fired, high-pressure device with its own fire fighting apparatus. The crew on board should be
aware of application method of local fire extinguisher (foam type). In addition, fire drill needs to be
carried out periodically to prevent accidents.
Apart from measures and operations mentioned above, there are other points that need to be paid
attention in boiler operation.
Don’ts in Boiler Operation
Starting Failure
Never let the inexperienced engineer and untrained operator light up the boiler, especially from
the cold condition. If the boiler is started but failed 3 times, trouble should be traced prior to another
starting. Important points, e.g. pre and post surging, correct starting operating, should be observed.
In addition, abnormal conditions in the boiler should be observed carefully in terms of sound,
smoke, flame quality, drum level and other parameters. Any abnormalities are found; correct them
as soon as possible.
Avoiding Actions
Never operate a soot blower when the boiler is at a high load. Never do the blow down
excessively since the feed water system will add cool water to the boiler drum which will reduce the
thermal efficiency and stress in the boiler. Never operate the boiler at a higher load as a regular
practice. Occasionally, boiler can be overloaded because of excess demand; however, frequent
overload will lead to high stress and tube failure. Never operate the boiler when there is leakage in
any water tube and rectify the failure at the earliest. Never supply sea water in any condition. If the
cascade is filled with sea water because of heavy leakage in the condenser, secure the equipment
and correct the problem.
Periodic Maintenance
Watch out the water level at regular intervals instead of relying on the water level indicator
which is located in the ECR. Keep a close watch to get the real and clear level by the local glass
gauge. Keep the furnace door of the boiler closed in normal condition. The door can be opened to
do cleaning and inspection work for the burner or furnace. Once the work is done, the furnace door
will be closed. In addition, periodic maintenance work is critical for the boiler and boiler auxiliaries
and fittings as the boiler efficiency will be much reduced if the maintenance work is not carried out
over a period of time.
The above mentioned do’s and don’ts provide a general overview to ensure that boiler efficiency is
maintained while the safety aspect is kept intact.

908
 Advances in Intelligent Systems Research, volume 156

Suggestions on Improving Boiler Efficiency on Board

One of the important tasks for marine engineers on board ships is to ensure that all the machinery
and systems are running efficiently, especially the critical equipment. The good running conditions
depend on a variety of factors which can affect the overall performance and efficiency of these
applications. Special attention must be paid to these important parameters for the marine boilers as
well. Several important points mention below must be taken into account in order to improve boiler
efficiency and performance.
Feed Water Temperature and level
It is essential to maintain the standard of all the inputs of the boiler system in order to improve
the system’s efficiency. Feed water system in the boiler system plays an important role in enhancing
the boiler operation efficiency. First of all, desired temperature of feed water is required. The
optimum temperature is maintained at approx. 80-85℃ which can ensure the boiler can be worked
at a high efficiency. Any decrease in feed water temperature can result in more time for heating up
the water to produce steam, more fuel consumption and less overall efficiency. Besides, water level
and temperature in the cascade should be monitored carefully as well. Any drop of the level in the
cascade should be arouse attention, it indicates more cold water will be added to maintain the
correct level, which cause reduction in the feed water temperature.
In summary, feed water temperature is a key factor to improve boiler efficiency. Therefore, feed
water temperature should be maintained. Hot well level controller should be operated properly.
Feed water temperature in hot well should be monitored.
Supply of Air/ Steam to Burner
To a large extent, an important factor which can determine the boiler efficiency is the percentage
of air/steam. This is required so that sufficient fire is ignited in the furnace through good
combustion. For the oil-fired marine boiler with register type burner, 15-20% by weight of air is
required for efficient combustion. Excessive air within the required range may cause reduction
losses in the fuel gas. In practice, every 1% reduction in the excess air supplied to the furnace
results in approx. 0.6% increase in the boiler overall efficiency. In enhancing the efficiency by
air/steam, several points should be taken into consideration. Reduce or avoid excess air/steam; be
aware of air fuel ratio under the rating; check the content of combustion gases to adjust the air fuel
ratio correspondingly. It is better to fit a boiler economizer to improve the boiler efficiency.
Observation of Critical Parameters and Parts
Marine boiler is a device which maintains high pressure to produce high temperature steam for
driving or other purposes. The outer shell or frame of the boiler is a key part since it not only has a
lot to do with the pressure but also maintains the flue gas temperature intact inside the boiler to have
a good heat exchanging ability. It is therefore necessary to check whether there is leakage from the
boiler shell which may be caused by deformation or bulging of shell resulting in cracks. If there are
black spots in the outer plates of the boiler, it indicates the boiler shell has cracks and leakages may
be occurred. Check the refractory of the boiler to avoid overheating of the shell and damage to it. If
there is failure, replace the damage refractory as soon as possible. Check the insulation of the shell
to minimize the heat loss and maintain the boiler efficiency.
Necessary Cleaning Work
Soot deposits will form in the tube and internal surface of the oil-fired boilers which can
decrease the heat exchanging effect. It is indicated by the elevated tube stack temperature whether
there are soot deposits or not. Every 22℃ increase in the stack temperature will cause approx.1%
loss in efficiency and 3mm soot formation will cause about 2.5% fuel consumption increase.
Therefore, regular cleaning work and observation of parameters must be carried out to avoid loss of
efficiency as much as possible.
Blow down is a very important cleaning work as well to maintain the efficiency and it should be
performed at regular intervals. It indicates that such work should be done only when the chloride
level is high in the test or high conductivity alarm occurs. However, long period of blow down is
avoided since correct chloride and thermal stress should be kept. Regular short blow down and
check on chloride in the feed water are recommended.

909
 Advances in Intelligent Systems Research, volume 156

Boiler Loading
Boiler loading should be maintained within a correct range, neither too high nor too low. The
optimum range to obtain the highest efficiency is 2/3 of the full load. If it falls below half of the full
load, more air is required to burn the fuel which can increase of the heat loss. Therefore, avoid
operate the boiler below 25% load because the efficiency will be much reduced. Keep the load at
the 2/3 of the full load.

Conclusion
Marine boiler is a device that requires a lot of attention to achieve the maximum efficiency. There
are a number of measures to achieve the efficiency. In the previous passages, some do’s and don’ts
and suggestions about boiler efficiency have been discussed. Apart from suggestions above
mentioned, it is certain that there are other measures need to be taken. In conclusion, correct
operation is the essential step to run the boiler. The operator is required to have the professional
knowledge to operate the boiler. Keep a check on the various important parts and systems and do
the cleaning and maintaining work play a crucial role in obtaining the boiler efficiency. Feed water
temperature and level control, supply air/steam to burner, important parameters and parts and
systems, boiler loading, etc. are common factors need to be controlled strictly and carefully. It is
therefore necessary for the engineers to do the check and cleaning work according to the instruction
manual. During boiler operation, safety precautions need to be taken to avoid potential accidents
and hazards.

References
[1] Cen Kefa. Science of Advanced Combustion [C]. Hangzhou: Zhejiang University Press, 2002.
33-57.
[2] Beltrame, A, Porshnev, P, et al. Soot and NO formation in Methane-Oxygen Enriched Diffusion
Flame [J], Combustion and Flame, 2001, 124: 295-310.
[3] Jia Hongxiang. Heat transfer in Boiler Furnace[M]. Xi’an: Xi’an Jiaotong University Press,
1988.
[4] Liu Hongru, Wan Longjun, Xu yiqun. Research On Simulation of Marine Auxiliary Boiler
System [J], Mechanical & Electrical Engineering Technology, 2015, 44(7) 89-91.
[5] Zhao You. Analysis of the Method of Improving the Thermal Efficiency of Marine Auxiliary
Boiler [J], Science and Technology & Innovation, 2015, 13, 144-146.
[6] Yang Zhiyun, Zhou Guoyi,et al. The Experimental System and Analytical Method of the
Flue-gas Filter used on a Marine Supercharged Boiler [J], Ship Marine Engineering, 2006, 2,
25-27.
[7] R.S. Virdi, D.G. Thakur. Investigation and Analysis of High Temperature Corrosion and
Degradation of Marine Boiler Combustion Swirler [J], Journal of Marine Science and
Application, 2016, 15(1) 86-94
[8] Zzhang Lixiang. The Boiler Steam Temperature Fuzzy-adaptation PI Control System Intelligent
Control and Automation, 2000. Proceedings of the 3rd World Congress On Volume, July,
2000.

910