Scribd
Upload
356 views

Corys Geosynthetics Data Sheet HDPE Smooth Geomembrane: Metric Units

This document provides specifications for high-density polyethylene (HDPE) smooth geomembrane sheets in various thicknesses ranging from 0.75mm to 3.00mm. It lists test methods and minimum requirements for properties such as thickness, density, tensile strength, tear resistance, puncture resistance, stress crack resistance, ultraviolet resistance, and more. Dimensions and test frequency for quality control are also specified.

Uploaded by

Venkadesh Periathambi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
356 views

Corys Geosynthetics Data Sheet HDPE Smooth Geomembrane: Metric Units

This document provides specifications for high-density polyethylene (HDPE) smooth geomembrane sheets in various thicknesses ranging from 0.75mm to 3.00mm. It lists test methods and minimum requirements for properties such as thickness, density, tensile strength, tear resistance, puncture resistance, stress crack resistance, ultraviolet resistance, and more. Dimensions and test frequency for quality control are also specified.

Uploaded by

Venkadesh Periathambi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Metric Units

CORYS GEOSYNTHETICS DATA SHEET


HDPE Smooth Geomembrane
Value
Properties Test Method Frequency Units
0.75 mm 1.00 mm 1.50 mm 2.00 mm 2.50 mm 3.00 mm

Thickness (min. ave.) ASTM D 5199 Per Roll mm 0.75 1.00 1.50 2.00 2.50 3.00

Density (min. ave.) ASTM D 1505/D 792 90,000 Kg g/cc 0.940 0.940 0.940 0.940 0.940 0.940
Melt Flow Index @190°C / 2.16 kg ASTM D 1238 Per g/10 min. 0.1> MFR 0.1> MFR 0.1> MFR 0.1> MFR 0.1> MFR 0.1> MFR
Formulation <1.0 <1.0 <1.0 <1.0 <1.0 <1.0
Tensile Properties¹ (min. ave.)
➢ Strength at yield ASTM D 6693 kN/m 13 17 26 37 44 56
➢ Strength at break Type IV 9,000 Kg kN/m 24 32 47 66 75 86
➢ Elongation at yield (gauge length 33mm) (@50 mm/min.) % 15 15 15 15 15 15
➢ Elongation at break (gauge length50mm) % 720 720 720 720 720 720

Tear Resistance (min. ave.) ASTM D 1004 20,000 Kg N 98 144 220 320 375 460
Puncture Resistance (min. ave.) ASTM D 4833 20,000 Kg N 310 392 540 710 820 970
Stress Crack Resistance (NCTL)² ASTM D 5397 Per hrs. ≥500 ≥500 ≥500 ≥500 ≥500 ≥500
Formulation
Environmental Stress Crack Resistance ASTM D 1693 Per hrs. >2000 >2000 >2000 >2000 >2000 >2000
(ESCR) 10% Igpal / F50 Formulation
Carbon Black Content ASTM D 1603 9,000 Kg % 2.0 – 3.0 2.0 – 3.0 2.0 – 3.0 2.0 – 3.0 2.0 – 3.0 2.0 – 3.0
Carbon Black Dispersion ASTM D 5596 Per Category Note 3* Note 3* Note 3* Note 3* Note 3* Note 3*
Formulation
Oxidative Induction Time (OIT)
➢ Standard OIT ASTM D 3895 90,000 Kg min. ≥120 ≥120 ≥120 ≥120 ≥120 ≥120
or
➢ High Pressure OIT ASTM D 5885 90,000 Kg min. 400 400 400 400 400 400
Oven Aging at 85°C ASTM D 5721
➢ Standard OIT. % Retained after 90 days ASTM D 3895 Per % 55 55 55 55 55 55
or Formulation
➢ High pressure OIT (min. avg.)-%retained ASTM D 5885 80 80 80 80 80 80
after 90 days
UV Resistance Note4* GRI GM 11 Per
➢ High pressure OIT Note5*. % Retained ASTM D 5885 Formulation % 50 50 50 50 50 50
after 1600 hrs (min. ave.)
Dimensional Stability ASTM D 1204 Per % ±1 ±1 ±1 ±1 ±1 ±1
Formulation
Roll Dimensions
➢ Width Meters 7 7 7 7 7 7
➢ Length Meters 280 210 140 105 84 70
➢ Area Sq. metr. 1960 1470 980 735 588 490
Note:
1. Machine Direction (MD) and Transverse Direction (TD) average values are on the basis of 5 specimens each direction.
2. The yield stress used to calculate the applied load for the SP-NCTL test should be the mean value via MQC testing.
3. Carbon Black Dispersion for 10 different views: 9 in Categories 1 and 2 with 1 allowed in Category 3.
4. The condition of the test should be 20 hr. UV cycle at 75°C followed by 4 hr. condensation at 60°C.
5. UV resistance is based on percent retained value regardless of the original HP-OIT value.
This data is provided for informational purpose only. The specifications on this sheet are subject to change without notice.
CGS / GM CGS/GMB-PTDS / Rev.04/ 07/19

www.geosynthetics.corys.ae
Corys Geosynthetics LLC
P.O. Box 2345 Nad Al Hamar Road, Dubai - United Arab Emirates. Tel: +971 42894670 - Fax: +971 42894620 - Email: [email protected]
[email protected] :‫ون‬ ‫ر‬
‫ ر‬+97142894620 :‫ فاكس‬+97142894670 :‫ هاتف‬.‫دب اإلمارات العربية المتحدة‬
‫البيد اإللكب ي‬ ‫ شارع ند الحمر ي‬2345 ‫صندوق بريد‬

You might also like