Pallet Racking - Storage Systems - 0

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Document Ref: LHS2013/08

Revision Date: 02/08/2013

Clane Business Park


Clane, Co. Kildare
Ph: 045-868342
Fax: 045-861447
www.liftingandhandling.ie
[email protected]

INSPECTION OF PALLET
RACKING & STORAGE
SYSTEMS

LIFTING AND HANDLING SERVICES

TEST HOUSE
SOLUTIONS FOR INDUSTRY

Portable Appliance Testing Solutions


Lifting and Handling Services Ltd.
“Yours Partners in Safety”

Company Profile

Lifting and Handling Services is an independent Test House, carrying out statutory inspection and
certification of materials handling and safety equipment, see enclosed listing. Our company takes
inspection to the next level by combining the right people, processes and experience with personal attention
to provide our clients with an unrivalled quality of service.

We were the first company of our kind in Ireland to develop a state of the art bespoke online safety
management programme which our clients can access 24/7 to view a comprehensive suits of reports
surrounding statutory inspection history, plant failures, repairs and statistical analysis.

Services Provided

Lifting and Handling Services provide the following services to our clients nationwide:

 Pallet Racking and Storage Systems  Access Equipment including ladders


 Load Testing – Safety Equipment and  Calibration & Certification of Torque Measure
Structural Devices
 Product Investigation & Reporting  P.A.T. (Portable Appliance Testing) Solutions
 Non Destructive Testing Services  Static Testing
 Safety Management Consultation & Training  Fuel Dispense / Pump Testing
 Accident & Incident Investigation  Air Receivers & Pressure Vehicles
 Expert Witness  Fire Extinguishers Inspection
 Maintenance, Service & Inspection of Air  Statutory Inspection and Certification of
Receivers & Compressors Materials Handling & Safety Equipment
 Ergonomics – Work Risk Analysis & Solutions  CAD Design & Simulations for steel structures
 Fire Safety Risk Assessment / Audits  Safety Audits & Risk Assessments

Pallet Racking & Storage Systems

Lifting and Handling Services can offer a full inspection service for all of
your on-site pallet racking and warehouse storage systems, including:

• Adjustable Pallet Racking


• Narrow Aisle Racking
• Drive-in Racking
• Mobile Racking
• Pallet Live Storage

Pallet Racking & Storage


Systems

Maintenance, Service & Inspection of Air Receivers & Compressors


Lifting and Handling Services Ltd.
“Yours Partners in Safety”

Statutory Requirements

The Safety, Health and Welfare at Work (General Application) Regulations 2007
S.I. No. 299 of 2007 stipulates that each employer has a responsibility to ensure a safe place of work for
their employees. This includes ensuring that racking and storage systems are in a safe condition at all
times. Pallet Racking and Storage Systems are classified as installations under the Regulations which
states that “work equipment means any machinery, appliance, apparatus, tool or installation for use at
work”.

As such Section 30 “Inspection of work equipment”


applies, which states that:

An employer shall ensure that—

(a) where the safety of work equipment depends on


the installation conditions—

(i) an initial inspection is carried out after


installation is completed and before it is first put
into service, and

(ii) an inspection is carried out after assembly at


any new site or in any new location, and that the
work equipment is installed correctly and is
operating properly,

(b) in the case of work equipment which is exposed to conditions causing deterioration liable to result in a
danger to safety or health—

(i) periodic inspections and, where appropriate, testing is carried out,

(ii) special inspections are carried out when exceptional circumstances arise which are liable to make the
work equipment unsafe, including modification work, accidents, natural phenomena or prolonged inactivity,
and

(iii) deterioration is detected and remedied in good time,

(c) inspections carried out under paragraphs (a) and (b) are carried out by a competent person and are
appropriate to the nature, location and use of the work equipment,

(d) the results of inspections carried out under paragraphs (a) and (b) are recorded and kept available for 5
years from the date of inspection, for inspection by an inspector, and access to these records is made
available to users of the work equipment upon request, and

(e) when work equipment is used in another place of work, it is accompanied by evidence of the last
inspection carried out under paragraphs (a) and (b).
Lifting and Handling Services Ltd.
“Yours Partners in Safety”

Inspection of Racking

Lifting and Handling Services offers a complete and comprehensive Pallet Storage & Racking Systems
Safety Inspection Service, which will ensure that you meet all of your obligations under the Statutory
Regulations. All LHS surveyors are “competent persons” as defined within the Statutory Regulations, and
have extensive experience in the inspection and certification industry. A full set of reports are provided
following the inspection, which highlights all risks identified using our proven risk assessment methodology.

Pallet Racking & Storage Systems are load-bearing structures, and as such their stability will be affected in
the event of:

• Damage caused by fork trucks and


other machinery

• Damaged caused by over-loading

• Change in load capacity following


alternation

• Incorrect design or installation

LHS can help you to:

• Identify and report problems before


they become more serious

• Confirm the safety, integrity and


reliability of your pallet racking and
storages systems

• Minimize the risk of workplace


accidents or collapses

• Ensure worker safety and prevent


injury, loss of life, fines, compensation
claims and legal actions etc.

• Maintain high safety standard and


comply with all Statutory Regulations

• Enable all personal to conduct their work in a safe working environment


Lifting and Handling Services Ltd.
“Yours Partners in Safety”

Certification

All racking will have a signed self-adhesive label affixed showing the date of inspection and the work
carried out. An inspection report and certificate of conformance will be given to you showing details of the
service history of each piece of racking equipment and the number and type of racking on site will be
provided along with a certificate of inspection that you can displace in your workplace.

LIFTING AND HANDLING


SERVICES

CALIBRATION SERVICES

Data Collection &


Pallet Racking & Storage
Certification
System Testing

CLASS Data Collection


Software

CLASS Online accessible


24/7

Contact us for advice or a quotation at 045-868342 or [email protected]

You might also like