0% found this document useful (0 votes)
126 views8 pages

Input Calculation: Case 1 Case 3 Case 4 Case 5 Case 6 Case 7 Case 8

The document analyzes the design of a concrete slab with given dimensions and load conditions. It calculates required slab thickness, reinforcement, moments, and stresses. It considers 9 support cases and provides reinforcement requirements and spacing for negative and positive bending moments at continuous edges, discontinuous edges, and middle spans.

Uploaded by

abdullah rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
126 views8 pages

Input Calculation: Case 1 Case 3 Case 4 Case 5 Case 6 Case 7 Case 8

The document analyzes the design of a concrete slab with given dimensions and load conditions. It calculates required slab thickness, reinforcement, moments, and stresses. It considers 9 support cases and provides reinforcement requirements and spacing for negative and positive bending moments at continuous edges, discontinuous edges, and middle spans.

Uploaded by

abdullah rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 8

Input Calculation

Slab thickness = 5 in. Thickness from perimeter = 6.9 in , Selected thickness = 6.9
Live load = 40 psf d = (t-1.35) = 5.6 Total load w = 190.0 psf m = 0.79
Floor finish = 10 psf Moments Reinforcement
Partition wall load = 52.89 psf Negative moments at continuous edges 10 mm @
Longer side, b = 29.00 ft Ma(-ve) = 7.84 kip-ft d not OK As = 1.23 sq.in./ft 1.2 " c/c
Smaller side, a = 23.0 ft Mb(-ve) = 2.24 kip-ft d OK As = 0.35 sq.in./ft 4.3 " c/c
Support case no. = 9 Positive moments at the middle span
Concrete & Reinf. Properties: Ma(+ve) = 3.43 kip-ft d OK As = 0.54 sq.in./ft 2.8 " c/c
f'c = 2,500 psi Mb(+ve) = 1.32 kip-ft d OK As = 0.21 sq.in./ft 7.2 " c/c
fy = 40,000 psi Negative moments at discontinuous edge
fc = ### psi, fs = 16000 psi Ma(-ve) = 1.14 kip-ft d OK As = 0.18 sq.in./ft 8.3 " c/c
n = 11 k = 0.436 j = 0.85 Mb(-ve) = 0.44 kip-ft d OK As = 0.07 sq.in./ft 22 " c/c

Case 1 Case 2 Case 3 Case 4 Case 5 Case 6 Case 7 Case 8


6.9 in

Reinforcement
12 mm @ 16 mm @
2 " c/c 3 " c/c
6 " c/c 11 " c/c

4" c/c 6.9 " c/c


10" c/c 18 " c/c

12" c/c 21 " c/c


30 " c/c 54 " c/c

Case 8 Case 9
0.50 0.000 0.000 0.086 0.006 0.000 0.022 0.094 0.006 0.090
0.55 0.000 0.000 0.084 0.007 0.000 0.028 0.092 0.008 0.089
0.60 0.000 0.000 0.081 0.010 0.000 0.035 0.089 0.011 0.088
0.65 0.000 0.000 0.077 0.014 0.000 0.043 0.085 0.015 0.087
0.70 0.000 0.000 0.074 0.017 0.000 0.050 0.081 0.019 0.086
0.75 0.000 0.000 0.069 0.022 0.000 0.056 0.076 0.024 0.085
0.80 0.000 0.000 0.065 0.027 0.000 0.061 0.071 0.029 0.083
0.85 0.000 0.000 0.060 0.031 0.000 0.065 0.066 0.034 0.082
0.90 0.000 0.000 0.055 0.037 0.000 0.070 0.060 0.040 0.080
0.95 0.000 0.000 0.050 0.041 0.000 0.072 0.055 0.045 0.079
1.00 0.000 0.000 0.045 0.045 0.000 0.076 0.050 0.050 0.075
0.000 0.097 0.000 0.000 0.014 0.089 0.010 0.088 0.003
0.000 0.096 0.000 0.000 0.019 0.085 0.014 0.086 0.005
0.000 0.095 0.000 0.000 0.024 0.080 0.018 0.085 0.006
0.000 0.093 0.000 0.000 0.031 0.074 0.024 0.083 0.008
0.000 0.091 0.000 0.000 0.038 0.068 0.029 0.081 0.011
0.000 0.088 0.000 0.000 0.044 0.061 0.036 0.078 0.014
0.000 0.086 0.000 0.000 0.051 0.055 0.041 0.075 0.017
0.000 0.083 0.000 0.000 0.057 0.049 0.046 0.072 0.021
0.000 0.079 0.000 0.000 0.062 0.043 0.052 0.068 0.025
0.000 0.075 0.000 0.000 0.067 0.038 0.056 0.065 0.029
0.000 0.071 0.000 0.000 0.071 0.033 0.061 0.061 0.033
0.50 0.095 0.006 0.037 0.002 0.080 0.007 0.059 0.004 0.039
0.55 0.088 0.008 0.035 0.003 0.071 0.009 0.056 0.005 0.038
0.60 0.081 0.010 0.034 0.004 0.062 0.011 0.053 0.007 0.037
0.65 0.074 0.013 0.032 0.006 0.054 0.014 0.050 0.009 0.036
0.70 0.068 0.016 0.030 0.007 0.046 0.016 0.046 0.011 0.035
0.75 0.061 0.019 0.028 0.009 0.040 0.018 0.043 0.013 0.033
0.80 0.056 0.023 0.026 0.011 0.034 0.020 0.039 0.016 0.032
0.85 0.050 0.026 0.024 0.012 0.029 0.022 0.036 0.019 0.031
0.90 0.045 0.029 0.022 0.014 0.025 0.024 0.033 0.022 0.029
0.95 0.040 0.033 0.020 0.016 0.021 0.025 0.030 0.024 0.028
1.00 0.036 0.036 0.018 0.018 0.018 0.027 0.027 0.027 0.027
0.001 0.061 0.003 0.089 0.007 0.056 0.004 0.038 0.002
0.002 0.058 0.004 0.081 0.009 0.052 0.005 0.037 0.003
0.003 0.056 0.006 0.073 0.012 0.048 0.007 0.036 0.004
0.004 0.054 0.007 0.065 0.014 0.044 0.009 0.034 0.005
0.005 0.051 0.009 0.058 0.017 0.040 0.011 0.033 0.006
0.007 0.048 0.012 0.051 0.02 0.036 0.013 0.031 0.007
0.009 0.045 0.015 0.045 0.022 0.032 0.015 0.029 0.010
0.011 0.042 0.017 0.04 0.025 0.029 0.017 0.028 0.013
0.013 0.039 0.021 0.035 0.028 0.025 0.019 0.026 0.015
0.015 0.036 0.024 0.031 0.031 0.022 0.021 0.024 0.017
0.018 0.033 0.027 0.027 0.033 0.020 0.023 0.023 0.020
0.50 0.095 0.006 0.066 0.004 0.088 0.007 0.077 0.005 0.067
0.55 0.088 0.008 0.062 0.006 0.080 0.009 0.072 0.007 0.063
0.60 0.081 0.010 0.058 0.007 0.071 0.011 0.067 0.009 0.059
0.65 0.074 0.013 0.053 0.010 0.064 0.014 0.062 0.011 0.055
0.70 0.068 0.016 0.049 0.012 0.057 0.016 0.057 0.014 0.051
0.75 0.061 0.019 0.045 0.014 0.051 0.019 0.052 0.016 0.047
0.80 0.056 0.023 0.041 0.017 0.045 0.022 0.048 0.020 0.044
0.85 0.050 0.026 0.037 0.019 0.040 0.024 0.043 0.023 0.041
0.90 0.045 0.029 0.034 0.022 0.035 0.027 0.039 0.026 0.037
0.95 0.040 0.033 0.030 0.025 0.031 0.029 0.035 0.029 0.034
1.00 0.036 0.036 0.027 0.027 0.027 0.032 0.032 0.032 0.032
0.004 0.078 0.005 0.092 0.007 0.076 0.005 0.067 0.004
0.005 0.073 0.006 0.085 0.009 0.070 0.007 0.063 0.006
0.007 0.068 0.008 0.077 0.011 0.065 0.009 0.059 0.007
0.009 0.064 0.010 0.070 0.014 0.059 0.011 0.054 0.009
0.011 0.060 0.013 0.063 0.017 0.054 0.014 0.050 0.011
0.013 0.055 0.016 0.056 0.020 0.049 0.016 0.046 0.013
0.016 0.051 0.019 0.051 0.023 0.044 0.019 0.042 0.017
0.019 0.046 0.022 0.045 0.026 0.040 0.022 0.039 0.020
0.021 0.042 0.025 0.040 0.029 0.035 0.024 0.036 0.022
0.024 0.038 0.029 0.036 0.032 0.031 0.027 0.032 0.025
0.027 0.035 0.032 0.032 0.035 0.028 0.030 0.030 0.028

You might also like