Type Series Booklet: Submersible Borehole Pump

Submersible Borehole Pump
UPA
6 inch - UPA 150C

8 inch - UPA 200, UPA 200B
10 inch - UPA 250C
12 - 14 inch - UPA 300, UPA 350
Type Series Booklet

Legal information/Copyright
Type Series Booklet UPA
All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
edited or processed for any other purpose, nor otherwise transmitted, published or made available to a
third party without the manufacturer's express written consent.
Subject to technical modification without prior notice.
© KSB SE & Co. KGaA, Frankenthal 09/04/2020

Contents
Contents
Water Supply..................................................................................................................................................... 5
Submersible Borehole Pumps .................................................................................................................................................... 5
General overview, 50 Hz...................................................................................................................................................... 5
Overview of submersible motors .................................................................................................................................. 6
UPA 150C .............................................................................................................................................................................. 7
Main applications........................................................................................................................................................... 7
Fluids handled ................................................................................................................................................................ 7
Operating data............................................................................................................................................................... 7
Design details ................................................................................................................................................................. 7
Designation .................................................................................................................................................................... 8
Materials ......................................................................................................................................................................... 8
Product benefits ............................................................................................................................................................. 8
Product information ...................................................................................................................................................... 9
Certifications .................................................................................................................................................................. 9
Technical data .............................................................................................................................................................. 10
Scope of supply ............................................................................................................................................................ 27
Accessories .................................................................................................................................................................... 27
UPA 200, 200B, 250C .......................................................................................................................................................... 30
Main applications......................................................................................................................................................... 30
Fluids handled .............................................................................................................................................................. 30
Operating data............................................................................................................................................................. 30
Design details ............................................................................................................................................................... 30
Designation .................................................................................................................................................................. 31
Materials ....................................................................................................................................................................... 31
Coating and preservation ............................................................................................................................................ 32
Product benefits ........................................................................................................................................................... 32
Product information .................................................................................................................................................... 33
Certifications ................................................................................................................................................................ 33
Technical data .............................................................................................................................................................. 34
Scope of supply ............................................................................................................................................................ 57
UPA 300, 350 ...................................................................................................................................................................... 58
Fluids handled .............................................................................................................................................................. 58
Operating data............................................................................................................................................................. 58
Design details ............................................................................................................................................................... 58
Designation .................................................................................................................................................................. 59
Materials ....................................................................................................................................................................... 59
Coating and preservation ............................................................................................................................................ 60
Product benefits ........................................................................................................................................................... 60
Product information .................................................................................................................................................... 61
Certifications ................................................................................................................................................................ 61
Technical data .............................................................................................................................................................. 62
Scope of supply ............................................................................................................................................................ 74
Accessories for sizes UPA 200 to UPA 350 ........................................................................................................................ 75
Installation parts .......................................................................................................................................................... 75
Motor accessories ......................................................................................................................................................... 75
Electrical accessories..................................................................................................................................................... 75
Related Documents .................................................................................................................................................................. 77
List of components............................................................................................................................................................. 77
List of UPA 150C components ..................................................................................................................................... 77
List of UPA 200 components........................................................................................................................................ 79
List of UPA 200B components ..................................................................................................................................... 85
List of UPA 250C components ..................................................................................................................................... 87
Power cables....................................................................................................................................................................... 94
Operating data............................................................................................................................................................. 94
Designation .................................................................................................................................................................. 94
Design details ............................................................................................................................................................... 94
Selection information .................................................................................................................................................. 95
3
Contents
Dimensions and weights.............................................................................................................................................. 97

Cable connector ................................................................................................................................................................. 98
Cable clips ......................................................................................................................................................................... 100
Flow velocity past the motor........................................................................................................................................... 101
4
Water Supply
Submersible Borehole Pumps
Water Supply
General overview, 50 Hz

5 10 50 100 Q [U.S. gpm] 500 1000 5000 10000
5 10 50 100 Q [Imp. g.p.m.] 500 1000 5000 10000

2000
5000
4000
1000
3000
H
[m]
2000
500
H
400 [ft]
UPA 200
300 1000
200
UPA 200B 500
400
UPA 150C UPA 250C
100
300
UPA 300,350
200
50
40
30 100
20
50
40
10
30
20
5
0,5 1 2 5 10 20 Q [m3/h] 50 100 200 500 1000 2000 4000
0,2 0,5 1 2 5 10 20 Q [l/s] 50 100 200 500 1000

3400.5/10-EN
General overview, 50 Hz 5

Water Supply
Overview of submersible motors

The following submersible motors are available:
Selection table
Well diameter Motor size Voltage range Rated power Number of poles
2 poles 4 poles
4 inch 1~ Franklin DN 100 Up to 1 kV 0.37 to 2.2 kW ✔ -
3~ Franklin DN 100 Up to 1 kV 0.37 to 7.5 kW ✔ -
6 inch UMA 150E 1) Up to 1 kV 5.5 to 37 kW ✔ -
8 inch UMA 200D Up to 1 kV 37 to 90 kW ✔ -
Up to 1 kV 175 to 280 kW - ✔
TCD 1 to 3 kV 170 to 300 kW ✔ -
14 inch 14D Up to 1 kV 250 to 600 kW ✔ -
Up to 1 kV 150 to 400 kW - ✔
VBD 1 to 3 kV 140 to 400 kW ✔ -
VMD 1 to 3 kV 170 to 400 kW - ✔
16 inch XBD 1 to 3 kV 400 to 830 kW ✔ -
3 to 6 kV 260 to 700 kW ✔ -
XMD 1 to 3 kV 280 to 500 kW - ✔
3 to 6 kV 220 to 450 kW - ✔
19 inch ZBD 1 to 3 kV 650 to 1000 kW ✔ -
3 to 6 kV 650 to 1000 kW ✔ -
ZMD 1 to 3 kV 400 to 800 kW - ✔
3 to 6 kV 400 to 800 kW - ✔
24 inch EBD 1 to 3 kV 900 to 1600 kW ✔ -
3 to 6 kV 900 to 1600 kW ✔ -
EMD 1 to 3 kV 900 to 2000 kW - ✔
3 to 6 kV 900 to 2000 kW - ✔
Further motor data for the UMA asynchronous motor see type series booklet No. 3455.51
Further motor data for the UMA-S synchronous motor see type series booklet No. 3455.52
3400.5/10-EN
1) Also available as UMA-S 150E synchronous motor for operation on a frequency inverter.
6 General overview, 50 Hz

Water Supply
Design details
UPA 150C
Design
▪ Centrifugal pump
▪ Single-stage or multistage
▪ Single-entry
▪ Ring-section design
▪ Rigid connection between pump and motor
Type of installation
▪ Vertical installation
▪ Horizontal installation (depending on the number of
stages)
Drive
Asynchronous motor:
▪ With squirrel cage motor for submerged use
▪ Standard connection to NEMA
▪ Frequency 50 Hz
Main applications ▪ IP68 enclosure
▪ Spray irrigation systems ▪ DOL starting or star-delta starting
▪ General irrigation systems ▪ Frequency of starts
▪ Pressure boosting – DN 100: 20 start per hour
▪ Lowering groundwater levels – UMA 150E: 15 starts per hour
▪ Winding J1 (PVC) or, for higher temperatures, J2 (VPE /
▪ Domestic water supply
XLPE)
▪ Air-conditioning systems Synchronous motor:
▪ Water supply systems ▪ Interior (buried) permanent magnet synchronous motor
(IPMSM)
▪ IP68 enclosure
Fluids handled
▪ Drinking water
▪ Winding J2 (VPE / XLPE)
▪ Cooling water
▪ Frequency of starts ≤ 15 starts per hour
▪ River water, lake water and groundwater
▪ Max. permissible sand content of the fluid 50 g/m³
Electrical connection
▪ Delivered ex-factory with 1 or 2 motor leads (including
Operating data earth conductor and internal earthing)
Operating properties ▪ Extension cable connected with water-tight cable

connector
Characteristic Value
▪ Motor lead and extension cable suitable for drinking
Flow rate Q [m3/h] ≤ 79 water use
Q [l/s] ≤ 22
Head H [m] ≤ 440 Impeller type
Fluid temperature T [°C] ≤ +50 ▪ Radial or mixed flow versions
Speed n [rpm] ≤ 2900
Well diameter D [mm] 150
Bearings
D [″] 6
▪ Radial plain bearings
▪ Pump bearings lubricated by fluid handled; motor
bearings lubricated by water fill
3400.5/10-EN
▪ Axial thrust is balanced by a tilting-pad thrust bearing in

the motor (lower end)
▪ Intermediate bearing in every stage
Connections
▪ Pump screw-ended or flanged
▪ With lift check valve or connection branch
UPA 150C 7
Water Supply
Designation
Example: UPA 150C - 16 / 9

Designation key
Code Description
UPA Pump type series
150 Nominal size [mm]
C Design status
16 Flow rate at best efficiency point [m³/h]
9 Number of stages
Materials
Material selection for UPA 150C pumps
Component Material variant
C1 C2
Impeller CrNi steel (1.4301) CrNiMo steel (1.4404)
Suction casing / body of the lift check CrNiMo steel (1.4408)
valve
Screws, bolts and nuts CrNiMo steel (A4)
Stage casing CrNi steel (1.4301) CrNiMo steel (1.4404)
Shaft CrNi steel (1.4305) CrNiMo steel (1.4401)
Material selection for UMA 150E motors, DN 100

C1 C2
Bearing carrier DN 100 CrNi steel (1.4301) CrNiMo steel (1.4404)
UMA 150E CrNi steel (1.4301) CrNiMo steel (1.4571)
Stator case DN 100 CrNi steel (1.4301) CrNiMo steel (1.4571)
UMA 150E CrNi steel (1.4301) CrNiMo steel (1.4571)
Shaft DN 100 CrNi steel (1.4305) CrNiMo steel (1.4460)
UMA 150E CrNi steel (1.4021)2) / CrNiMo steel (1.4462)
CrNiMo steel (1.4462)3)
Product benefits
▪ High operating reliability and long service life due to
reinforced suction strainer, robust drive lantern and lift
check valve made of investment cast stainless steel, laser-
welded impellers and protection against thrust reversal
▪ High operating reliability as all components are made of
high-quality stainless steel.
▪ Optimised hydraulic design enables high efficiencies.
▪ High efficiencies in combination with UMA-S150E
synchronous motor
▪ High flexibility by vertical, horizontal and angular
installation options
▪ Reliable operation by anti-jam lift check valve
▪ Highly flexible operating range through adjustment of
motor dimensions
▪ Easy to install with service-friendly hydraulic system design
3400.5/10-EN
2) For motors < 18.5 kW

3) For motors ≥ 18.5 kW
8 UPA 150C
Water Supply
Product information ▪ The efficiency of a pump with a trimmed impeller is

usually lower than that of a pump with full impeller
diameter. Trimming of the impeller will adapt the pump
Product information as per Regulation No. 547/2012 to a fixed duty point, leading to reduced energy
(for 4" and 6" water pumps) implementing "Ecodesign" consumption. The minimum efficiency index (MEI) is based
Directive 2009/125/EC on the full impeller diameter.
▪ Minimum efficiency index: see data sheet ▪ Operation of this water pump with variable duty points
may be more efficient and economic when controlled, for
▪ The benchmark for the most efficient water pumps is MEI example, by the use of a variable speed drive that matches
≥ 0.70. the pump duty to the system.
▪ Year of construction: see data sheet ▪ Information relevant for disassembly, recycling or disposal
at end of life: see installation/operating manual
▪ Manufacturer’s name or trade mark, commercial
registration number and place of manufacture: see data ▪ Information on benchmark efficiency or benchmark
sheet or order documentation efficiency graph for MEI = 0.70 (0.40) for the pump based
on the model shown in the Figure are available at: http://
▪ Product’s type and size identificator: see data sheet www.europump.org/efficiencycharts
▪ Hydraulic pump efficiency (%) with trimmed impeller: see
data sheet
▪ Pump performance curves, including efficiency
Product information as per Regulation No.
characteristics: see documented characteristic curve 1907/2006 (REACH)
For information as per chemicals Regulation (EC) No. 1907/2006
(REACH), see http://www.ksb.com/reach.
Information on characteristic curves

The characteristic curves shown are intended to allow pre-selection. Refer to the quotation for the precise selection data.
▪ Tolerance to ISO 9906 Cl. 2B, > 10 kW
▪ Tolerance to ISO 9906 Cl. 3B, < 10 kW
▪ Threaded end to DIN ISO 228, Part 1
▪ Flanged end to DIN EN 1092
Hv Head losses in the lift check valve. The head losses Hv in the lift check valve are not included in the pump characteristic
curves.
ηp Pump efficiency (without lift check valve)
NPSH Net positive suction head required by pump
Certifications
Overview
Label Effective in: Comment
All countries Certified quality management to
ISO 9001
France Approved in accordance with the

French drinking water regulation
3400.5/10-EN
UPA 150C 9
Water Supply
Technical data
Selection chart
n = 2900 rpm
30 40 50 60 80 100 Q [U.S. gpm] 200 300
20 30 40 50 60 80 100 Q [Imp. g.p.m.] 200 300

500
1500
400
300 1000
800
200
UPA 150C - 60
600
150 500
H UPA 150C - 16 400

[m]
UPA 150C - 30
100
300
80
UPA 150C - 48
60 200
50
H
40 [ft]
30 100
80
20
60
15 50
40
10
30
8
6 20
4
5 6 8 10 15 20 Q [m3/h] 30 40 50 60 80 100
80
60
η
[%] UPA 150C - 30 UPA 150C - 60
UPA 150C - 16 UPA 150C - 48
20
0
3400.5/10-EN
5 6 8 10 15 20 Q [m3/h] 30 40 50 60 80 100
1,5 2 3 4 5 6 8 10 Q [l/s] 15 20
Fig. 1: Selection chart UPA 150C
10 UPA 150C
Water Supply
UPA 150C - 16/..., number of stages 1 - 20

Connection types
Standard pump end = G 2 1/2
Possible connection types:
▪ Threaded connection
– G3
– G4
▪ Flanged connection
– DN 50
– DN 65
– DN 80
Alternative pump ends are possible.

The length of the pump set LA and the diameter Dmax
depend on the pump end.
For an alternative pump end the length of the pump set LA*
is calculated as follows:
LA* = LA - LG + LG*
Values for calculating the dimensions if using a different
pump end:
▪ G 2 1/2: ▪ DN 50:
LG* = 40 mm LG* = 77 mm
Dmax* ≙ Dmax Dmax* = 165 mm
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G 2 1/2
LG
LP
LA
Operating range
Qmin = 5 m3/h
Qmax= end of stage curve
3400.5/10-EN
Dimensions of UPA 150C - 16 / ... [mm]
UPA 150C 11
Water Supply
Dimensions, weights and installation type depending on the motor [mm]

UPA 150C - 16 DN motor UMA motor Type of
installation
Horizontal5)
LP LA LG4) Dmax Total weight LP LA LG4) Dmax Total weight
DOL DOL Y-Δ
Vertical
[mm] [mm] [mm] [mm] [kg] [mm] [mm] [mm] [mm] [mm] [kg]
16/1 336 607 40 139 16 - - - - - - ✘ ✘

16/2 397 718 40 139 19 - - - - - - ✘ ✘
16/3 457 810 40 139 23 - - - - - - ✘ ✘
16/4 518 926 40 139 26 - - - - - - ✘ ✘
16/5 578 986 40 139 27 - - - - - - ✘ ✘
16/6 639 1159 40 139 33 - - - - - - ✘ ✘
16/7 699 1352 40 139 42 731 1410 40 142 142 58 ✘ ✘
16/8 760 1413 40 139 43 791 1470 40 142 142 61 ✘ ✘
16/9 820 1473 40 139 45 852 1531 40 142 142 62 ✘ ✘
16/10 881 1612 40 139 50 912 1611 40 142 142 65 ✘ ✘
16/11 941 1672 40 139 51 973 1672 40 142 142 67 ✘ ✘
16/12 1002 1733 40 139 53 1033 1732 40 142 142 68 ✘ ✘
16/13 1062 1793 40 139 54 1094 1793 40 142 142 69 ✘ ✘
16/14 - - - - - 1154 1883 40 142 142 74 ✘ ✘
16/15 - - - - - 1215 1944 40 142 142 75 ✘ ✘
16/16 - - - - - 1275 2004 40 142 142 76 ✘ ✘
16/17 - - - - - 1336 2145 40 142 142 86 ✘ ✘
16/18 - - - - - 1396 2205 40 142 142 87 ✘ ✘
16/19 - - - - - 1457 2266 40 142 142 89 ✘ ✘
16/20 - - - - - 1517 2326 40 142 142 90 ✘ ✘
Technical data
UPA 150C - 16 Pump Motor Motor lead, flat
v ≥ 0,2 m/s (0,0
Number × cross-section of cores

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
H0 PN T max IN ηM cos φ DOL Y-Δ

[m] [kW] [°C] [A] [%] [mm2] [mm2]
DN motor
1 + DN 100-0.75 11,2 0,75 30 (30) 2,0 70,0 0,77 4 × 1,5 -
2 + DN 100-1.5 22 1,50 30 (30) 3,9 73,0 0,78 4 × 1,5 -
3 + DN 100-2.2 32,5 2,20 30 (30) 5,5 75,0 0,77 4 × 1,5 -
4 + DN 100-3.0 44 3,00 30 (30) 7,5 76,0 0,77 4 × 1,5 -
5 + DN 100-3.0 54 3,00 30 (30) 7,5 76,0 0,77 4 × 1,5 -
6 + DN 100-3.7 65 3,70 30 (30) 9,0 78,0 0,78 4 × 1,5 -
7 + DN 100-5.5 79 5,50 30 (20) 12,6 79,0 0,81 4 × 1,5 -
8 + DN 100-5.5 90 5,50 30 (20) 12,6 79,0 0,81 4 × 1,5 -
9 + DN 100-5.5 100 5,50 30 (20) 12,6 79,0 0,81 4 × 1,5 -
10 + DN 100-7.5 110 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
11 + DN 100-7.5 121 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
12 + DN 100-7.5 131 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
13 + DN 100-7.5 140 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
UMA motor
7 + UMA 150E 5/21 80 4,50 41 (38) 12,2 76,5 0,70 4 × 2,5 3/4 × 2,5
8 + UMA 150E 5/21 91 5,00 39 (35) 12,9 76,5 0,73 4 × 2,5 3/4 × 2,5
9 + UMA 150E 5/21 102 5,50 37 (32) 13,8 76,1 0,76 4 × 2,5 3/4 × 2,5
10 + UMA 150E 7/21 113 6,50 36 (31) 16,3 77,0 0,74 4 × 2,5 3/4 × 2,5
11 + UMA 150E 7/21 124 7,00 33 (28) 17,2 77,0 0,77 4 × 2,5 3/4 × 2,5
12 + UMA 150E 7/21 134 7,50 31 (25) 18,1 77,0 0,78 4 × 2,5 3/4 × 2,5
13 + UMA 150E 7/21 145 7,50 31 (25) 18,1 77,0 0,78 4 × 2,5 3/4 × 2,5
14 + UMA 150E 9/21 157 8,50 32 (27) 20,3 78,5 0,77 4 × 2,5 3/4 × 2,5
15 + UMA 150E 9/21 168 9,00 30 (24) 21,2 78,3 0,79 4 × 2,5 3/4 × 2,5
16 + UMA 150E 9/21 178 9,30 29 (23) 21,7 78,1 0,79 4 × 2,5 3/4 × 2,5
17 + UMA 150E 13/21 193 10,50 35 (30) 26,1 80,6 0,72 4 × 2,5 3/4 × 2,5
3400.5/10-EN
18 + UMA 150E 13/21 204 11,00 34 (29) 26,8 80,6 0,74 4 × 2,5 3/4 × 2,5
19 + UMA 150E 13/21 215 11,50 33 (27) 27,6 80,5 0,75 4 × 2,5 3/4 × 2,5
20 + UMA 150E 13/21 225 12,00 31 (26) 28,4 80,5 0,76 4 × 2,5 3/4 × 2,5
4) Length of pump end fitted as standard

5) To reliably dissipate the motor heat of pump sets installed in a horizontal position, sufficient flow velocity past the motor is
necessary. A cooling shroud, hood or similar must be used.
12 UPA 150C
Water Supply

Connection types
Standard pump end = G 2 1/2
– G3
– G4
– DN 50
– DN 65
– DN 80

LA* = LA - LG + LG*
pump end:
▪ G 2 1/2: ▪ DN 50:
LG* = 40 mm LG* = 77 mm
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G 2 1/2
LG
LP
LA
Operating range
Qmin = 5 m3/h
3400.5/10-EN
UPA 150C 13
Water Supply

installation
Horizontal7)
DOL DOL Y-Δ
Vertical
16/21 - - - - - 1578 2387 40 142 142 91 ✘ ✘

16/22 - - - - - 1638 2447 40 142 142 93 ✘ ✘
16/23 - - - - - 1699 2508 40 142 142 94 ✘ ✘
16/24 - - - - - 1759 2613 40 142 142 100 ✘ ✘
16/25 - - - - - 1820 2674 40 142 142 101 ✘ ✘
16/26 - - - - - 1880 2734 40 142 142 102 ✘ ✘
16/27 - - - - - 1941 2840 40 142 142 109 ✘ ✘
16/28 - - - - - 2001 2900 40 142 142 110 ✘ ✘
16/29 - - - - - 2062 2961 40 142 142 111 ✘ ✘
16/30 - - - - - 2122 3021 40 142 142 113 ✘ -8)
16/31 - - - - - 2183 3082 40 142 142 114 ✘ -8)
16/32 - - - - - 2243 3142 40 142 142 115 ✘ -8)
16/33 - - - - - 2304 3293 40 142 142 126 ✘ -8)
16/34 - - - - - 2364 3353 40 142 142 127 ✘ -8)
16/35 - - - - - 2425 3414 40 142 142 128 ✘ -8)
16/36 - - - - - 2485 3474 40 142 142 130 ✘ -8)
16/37 - - - - - 2546 3535 40 142 142 131 ✘ -8)
16/38 - - - - - 2606 3595 40 142 142 133 ✘ -8)
16/39 - - - - - 2667 3761 40 142 142 145 ✘ -8)
16/40 - - - - - 2727 3821 40 142 142 146 ✘ -8)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
UMA motor
21 + UMA 150E 13/21 236 13,00 28 (22) 30,1 80,3 0,78 4 × 2,5 3/4 × 2,5
22 + UMA 150E 13/21 246 13,00 28 (22) 30,1 80,3 0,78 4 × 2,5 3/4 × 2,5
23 + UMA 150E 13/21 256 13,00 28 (22) 30,1 80,3 0,78 4 × 2,5 3/4 × 2,5
24 + UMA 150E 15/21 269 14,00 32 (26) 31,7 81,5 0,78 4 × 4,0 3/4 × 2,5
25 + UMA 150E 15/21 280 15,00 29 (23) 33,4 81,3 0,80 4 × 4,0 3/4 × 2,5
26 + UMA 150E 15/21 290 15,00 29 (23) 33,4 81,3 0,80 4 × 4,0 3/4 × 2,5
27 + UMA 150E 18/21 305 16,00 31 (25) 38,0 82,1 0,74 4 × 4,0 3/4 × 2,5
28 + UMA 150E 18/21 315 16,50 30 (24) 38,8 82,1 0,75 4 × 4,0 3/4 × 2,5
29 + UMA 150E 18/21 326 17,00 29 (22) 39,6 82,0 0,76 4 × 4,0 3/4 × 2,5
30 + UMA 150E 18/21 336 17,50 28 (21) 40,4 81,9 0,76 4 × 4,0 3/4 × 2,5
31 + UMA 150E 18/21 347 18,00 26 (19) 41,2 81,8 0,77 4 × 4,0 3/4 × 2,5
32 + UMA 150E 18/21 357 18,50 25 (18) 42,1 81,6 0,78 4 × 4,0 3/4 × 2,5
33 + UMA 150E 22/21 373 20,00 32 (26) 45,9 83,4 0,75 4 × 4,0 3/4 × 2,5
34 + UMA 150E 22/21 383 20,00 32 (26) 45,9 83,4 0,75 4 × 4,0 3/4 × 2,5
35 + UMA 150E 22/21 394 21,00 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
36 + UMA 150E 22/21 404 22,00 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
37 + UMA 150E 22/21 415 22,00 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
38 + UMA 150E 22/21 425 22,00 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
39 + UMA 150E 26/21 441 24,00 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
40 + UMA 150E 26/21 451 24,00 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
3400.5/10-EN

8) On request
14 UPA 150C
Water Supply

Connection types
Standard pump end = G 3
– G4
– DN 65
– DN 80

LA* = LA - LG + LG*
pump end:
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G3
LG
LP
LA
Operating range
Qmin = 12 m3/h
3400.5/10-EN
UPA 150C 15
Water Supply

installation
Horizontal10)
DOL DOL Y-Δ
Vertical
30/1 389 686 48 139 17 - - - - - - ✘ ✘

30/2 485 838 48 139 22 - - - - - - ✘ ✘
30/3 581 989 48 139 26 - - - - - - ✘ ✘
30/4 677 1197 48 139 31 - - - - - - ✘ ✘
30/5 773 1426 48 139 41 805 1484 48 146 148 58 ✘ ✘
30/6 869 1522 48 139 42 901 1580 48 146 148 60 ✘ ✘
30/7 965 1696 48 139 48 997 1696 48 146 148 63 ✘ ✘
30/8 - - - - - 1093 1792 48 146 148 65 ✘ ✘
30/9 - - - - - 1189 1918 48 146 148 69 ✘ ✘
30/10 - - - - - 1285 2014 48 146 148 71 ✘ ✘
30/11 - - - - - 1381 2110 48 146 148 72 ✘ ✘
30/12 - - - - - 1477 2286 48 146 148 82 ✘ ✘
30/13 - - - - - 1573 2382 48 146 148 84 ✘ ✘
30/14 - - - - - 1669 2478 48 146 148 85 ✘ ✘
30/15 - - - - - 1765 2574 48 146 148 87 ✘ ✘
30/16 - - - - - 1861 2715 48 147 148 93 ✘ ✘
30/17 - - - - - 1957 2811 48 147 148 95 ✘ ✘
30/18 - - - - - 2053 2952 48 147 148 101 ✘ ✘
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
DN motor
1 + DN 100-1.1 10,6 1,10 30 (30) 2,8 74,0 0,78 4 × 1,5 -
2 + DN 100-2.2 21,5 2,20 30 (30) 5,5 75,0 0,77 4 × 1,5 -
3 + DN 100-3.0 32,0 3,00 30 (30) 7,5 76,0 0,77 4 × 1,5 -
4 + DN 100-3.7 43,0 3,70 30 (30) 9,0 78,0 0,78 4 × 1,5 -
5 + DN 100-5.5 55,0 5,50 30 (20) 12,6 79,0 0,81 4 × 1,5 -
6 + DN 100-5.5 66,0 5,50 30 (20) 12,6 79,0 0,81 4 × 1,5 -
7 + DN 100-7.5 76,0 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
UMA motor
5 + UMA 150E 5/21 56 4,50 41 (38) 12,2 76,5 0,70 4 × 2,5 3/4 × 2,5
6 + UMA 150E 5/21 67 5,50 37 (32) 13,8 76,1 0,76 4 × 2,5 3/4 × 2,5
7 + UMA 150E 7/21 78 6,50 36 (31) 16,3 77,0 0,74 4 × 2,5 3/4 × 2,5
8 + UMA 150E 7/21 88 7,00 33 (28) 17,2 77,0 0,77 4 × 2,5 3/4 × 2,5
9 + UMA 150E 9/21 100 8,00 34 (30) 19,4 78,7 0,76 4 × 2,5 3/4 × 2,5
10 + UMA 150E 9/21 110 9,00 30 (24) 21,2 78,3 0,79 4 × 2,5 3/4 × 2,5
11 + UMA 150E 9/21 120 9,30 29 (23) 21,7 78,1 0,79 4 × 2,5 3/4 × 2,5
12 + UMA 150E 13/21 134 11,00 34 (29) 26,8 80,6 0,74 4 × 2,5 3/4 × 2,5
13 + UMA 150E 13/21 144 11,50 33 (27) 27,6 80,5 0,75 4 × 2,5 3/4 × 2,5
14 + UMA 150E 13/21 154 12,50 30 (24) 29,2 80,4 0,77 4 × 2,5 3/4 × 2,5
15 + UMA 150E 13/21 165 13,00 28 (22) 30,1 80,3 0,78 4 × 2,5 3/4 × 2,5
16 + UMA 150E 15/21 176 14,50 30 (24) 32,51 81,4 0,79 4 × 4,0 3/4 × 2,5
17 + UMA 150E 15/21 186 15,00 29 (23) 33,4 81,3 0,80 4 × 4,0 3/4 × 2,5
18 + UMA 150E 18/21 200 16,00 31 (25) 38,0 82,1 0,74 4 × 4,0 3/4 × 2,5
3400.5/10-EN

16 UPA 150C
Water Supply

Connection types
– G4
– DN 65
– DN 80

LA* = LA - LG + LG*
pump end:
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G3
LG
LP
LA
Operating range
Qmin = 12 m3/h
3400.5/10-EN
UPA 150C 17
Water Supply

installation
Horizontal12)
DOL DOL Y-Δ
Vertical
30/19 - - - - - 2149 3048 48 147 148 102 ✘ -13)

30/20 - - - - - 2245 3144 48 147 148 104 ✘ -13)
30/21 - - - - - 2341 3240 48 147 148 105 ✘ -13)
30/22 - - - - - 2437 3426 48 147 148 116 ✘ -13)
30/23 - - - - - 2533 3522 48 147 148 117 ✘ -13)
30/24 - - - - - 2629 3618 48 147 148 119 ✘ -13)
30/25 - - - - - 2725 3714 48 147 148 121 ✘ -13)
30/26 - - - - - 2821 3915 48 149 149 133 ✘ -13)
30/27 - - - - - 2917 4011 48 149 149 135 ✘ -13)
30/28 - - - - - 3013 4107 48 149 149 136 ✘ -13)
30/29 - - - - - 3109 4203 48 149 149 138 ✘ -13)
30/30 - - - - - 3205 4299 48 149 149 140 ✘ -13)
30/31 - - - - - 3301 4495 48 149 149 151 ✘ -13)
30/32 - - - - - 3397 4591 48 149 149 153 ✘ -13)
30/33 - - - - - 3493 4687 48 149 149 154 ✘ -13)
30/34 - - - - - 3589 4783 48 149 149 156 ✘ -13)
30/35 - - - - - 3685 4959 48 149 149 164 ✘ -13)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
UMA motor
19 + UMA 150E 18/21 210 17,00 29 (22) 39,6 82,0 0,76 4 × 4,0 3/4 × 2,5
20 + UMA 150E 18/21 220 18,00 26 (19) 41,2 81,8 0,77 4 × 4,0 3/4 × 2,5
21 + UMA 150E 18/21 230 18,50 25 (18) 42,1 81,6 0,78 4 × 4,0 3/4 × 2,5
22 + UMA 150E 22/21 244 20,00 32 (26) 45,9 83,4 0,75 4 × 4,0 3/4 × 2,5
23 + UMA 150E 22/21 254 21,00 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
24 + UMA 150E 22/21 265 22,00 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
25 + UMA 150E 22/21 275 22,00 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
26 + UMA 150E 26/21 289 24,00 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
27 + UMA 150E 26/21 299 24,00 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
28 + UMA 150E 26/21 309 25,00 32 (26) 55,2 84,5 0,77 4 × 6,0 3/4 × 4,0
29 + UMA 150E 26/21 320 26,00 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
30 + UMA 150E 26/21 330 26,00 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
31 + UMA 150E 30/21 345 28,00 32 (26) 63,6 84,3 0,75 4 × 6,0 3/4 × 4,0
32 + UMA 150E 30/21 355 29,00 31 (25) 65,2 84,2 0,76 4 × 6,0 3/4 × 4,0
33 + UMA 150E 30/21 365 30,00 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
34 + UMA 150E 30/21 376 30,00 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
35 + UMA 150E 37/22 389 32,00 44 (38) 73,4 83,9 0,75 3/4 × 4,014) 3/4 × 4,0 3400.5/10-EN

13) On request
14) Parallel cable
18 UPA 150C
Water Supply

Connection types
– G4
– DN 65
– DN 80

LA* = LA - LG + LG*
pump end:
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G3
LG
LP
LA
Operating range
Qmin = 22 m3/h
3400.5/10-EN
UPA 150C 19
Water Supply

installation
Horizontal16)
DOL DOL Y-Δ
Vertical
48/1 406 759 48 139 23 - - - - - - ✘ ✘

48/2 519 927 48 139 27 - - - - - - ✘ ✘
48/3 632 1284,5 48 139 42 663 1342 48 143 146 58,3 ✘ ✘
48/4 745 1475,5 48 139 47 776 1475 48 143 146 32,6 ✘ ✘
48/5 - - - - - 889 1618 48 143 146 67,9 ✘ ✘
48/6 - - - - - 1002 1731 48 143 146 70,1 ✘ ✘
48/7 - - - - - 1115 1924 48 143 146 80,4 ✘ ✘
48/8 - - - - - 1228 2037 48 143 146 82,7 ✘ ✘
48/9 - - - - - 1341 2195 48 145 146 89,9 ✘ ✘
48/10 - - - - - 1454 2353 48 145 146 96,2 ✘ ✘
48/11 - - - - - 1567 2466 48 145 146 98,5 ✘ ✘
48/12 - - - - - 1680 2579 48 145 146 100,7 ✘ ✘
48/13 - - - - - 1793 2782 48 145 146 112 ✘ ✘
48/14 - - - - - 1906 2895 48 145 146 114,3 ✘ ✘
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
DN motor
1 + DN 100-2.2 13,2 2,20 30 (30) 5,5 75,0 0,77 4 × 1,5 -
2 + DN 100-3.0 26,5 3,00 30 (30) 7,5 76,0 0,77 4 × 1,5 -
3 + DN 100-5.5 41,0 5,50 30 (20) 12,6 79,0 0,81 4 × 1,5 -
4 + DN 100-7.5 54,0 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
UMA motor
3 + UMA 150E 5/21 42 5,00 39 (35) 12,9 76,5 0,73 4 × 2,5 3/4 × 2,5
4 + UMA 150E 7/21 55 6,50 36 (31) 16,3 77,0 0,74 4 × 2,5 3/4 × 2,5
5 + UMA 150E 9/21 69 8,00 34 (30) 19,4 78,7 0,76 4 × 2,5 3/4 × 2,5
6 + UMA 150E 9/21 81 9,30 29 (23) 21,7 78,1 0,79 4 × 2,5 3/4 × 2,5
7 + UMA 150E 13/21 97 11,50 33 (27) 27,6 80,5 0,75 4 × 2,5 3/4 × 2,5
8 + UMA 150E 13/21 109 12,50 30 (24) 29,2 80,4 0,77 4 × 2,5 3/4 × 2,5
9 + UMA 150E 15/21 123 14,50 30 (24) 32,5 81,4 0,79 4 × 4,0 3/4 × 2,5
10 + UMA 150E 18/21 138 16,00 31 (25) 38,0 82,1 0,74 4 × 4,0 3/4 × 2,5
11 + UMA 150E 18/21 151 17,50 28 (21) 40,4 81,9 0,76 4 × 4,0 3/4 × 2,5
12 + UMA 150E 18/21 163 18,50 25 (18) 42,1 81,6 0,78 4 × 4,0 3/4 × 2,5
13 + UMA 150E 22/21 179 21,00 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
14 + UMA 150E 22/21 191 22,00 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
3400.5/10-EN

20 UPA 150C
Water Supply

Connection types
– G4
– DN 65
– DN 80

LA* = LA - LG + LG*
pump end:
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G3
LG
LP
LA
Operating range
Qmin = 22 m3/h
3400.5/10-EN
UPA 150C 21
Water Supply

installation
Horizontal18)
DOL DOL Y-Δ
Vertical
48/15 - - - - - 2019 3113 48 146 147 128 ✘ -19)

48/16 - - - - - 2132 3226 48 146 147 130 ✘ -19)
48/17 - - - - - 2245 3339 48 146 147 132 ✘ -19)
48/18 - - - - - 2358 3552 48 146 147 144 ✘ -19)
48/19 - - - - - 2471 3665 48 146 147 147 ✘ -19)
48/20 - - - - - 2584 3858 48 145 147 156 ✘ -19)
48/21 - - - - - 2697 3971 48 145 147 158 ✘ -19)
48/22 - - - - - 2810 4084 48 145 147 160 ✘ -19)
48/23 - - - - - 2923 4197 48 145 147 163 ✘ -19)
48/24 - - - - - 3036 4310 48 145 147 165 ✘ -19)
Technical data
v ≥ 0,2 m/s (0,0 Number × cross-section of cores
Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
UMA motor
15 + UMA 150E 26/21 207 24,00 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
16 + UMA 150E 26/21 219 26,00 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
17 + UMA 150E 26/21 232 26,00 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
18 + UMA 150E 30/21 248 29,00 31 (25) 65,2 84,2 0,76 4 × 6,0 3/4 × 4,0
19 + UMA 150E 30/21 261 30,00 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
20 + UMA 150E 37/22 276 32,00 44 (38) 73,4 83,9 0,75 3/4 × 4,020) 3/4 × 4,0
21 + UMA 150E 37/22 289 33,00 43 (37) 75,0 83,8 0,76 3/4 × 4,020) 3/4 × 4,0
22 + UMA 150E 37/22 301 35,00 40 (34) 78,2 83,6 0,77 3/4 × 4,020) 3/4 × 4,0
23 + UMA 150E 37/22 314 36,00 39 (32) 79,9 83,4 0,78 3/4 × 4,020) 3/4 × 4,0
24 + UMA 150E 37/22 327 37,00 38 (31) 81,6 83,3 0,79 3/4 × 4,020) 3/4 × 4,0
3400.5/10-EN

19) On request
20) Parallel cable
22 UPA 150C
Water Supply

Connection types
– G4
– DN 65
– DN 80

LA* = LA - LG + LG*
pump end:
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G3
LG
LP
LA
Operating range
Qmin = 32 m3/h
3400.5/10-EN
UPA 150C 23
Water Supply

installation
Horizontal22)
DOL DOL Y-Δ
Vertical
60/1 406 759 48 139 22 - - - - - - ✘ ✘

60/2 519 1039 48 139 31 - - - - - - ✘ ✘
60/3 632 1363 48 139 45 663 1362 48 143 146 60,2 ✘ ✘
60/4 745 1476 48 139 47 776 1475 48 143 146 62,5 ✘ ✘
60/5 - - - - - 889 1618 48 143 146 67,8 ✘ ✘
60/6 - - - - - 1002 1811 48 143 146 78 ✘ ✘
60/7 - - - - - 1115 1924 48 143 146 80,3 ✘ ✘
60/8 - - - - - 1228 2082 48 145 146 87,6 ✘ ✘
60/9 - - - - - 1341 2240 48 145 146 93,8 ✘ ✘
60/10 - - - - - 1454 2443 48 145 146 105,1 ✘ ✘
60/11 - - - - - 1567 2556 48 145 146 107,4 ✘ ✘
60/12 - - - - - 1680 2774 48 146 147 120,6 ✘ ✘
60/13 - - - - - 1793 2887 48 146 147 122,9 ✘ ✘
Technical data
v ≥ 0,2 m/s (0,0
Rated current Number × cross-section of cores

Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
DN motor
1 + DN 100-2.2 13,4 2,20 30 (30) 5,5 75,0 0,77 4 × 1,5 -
2 + DN 100-3.7 27 3,70 30 (30) 9,0 78,0 0,78 4 × 1,5 -
3 + DN 100-7.5 41 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
4 + DN 100-7.5 53 7,50 30 (20) 17,1 79,0 0,81 4 × 1,5 -
UMA motor
3 + UMA 150E 7/21 42 6,00 38 (34) 15,5 78,0 0,72 4 × 2,5 3/4 × 2,5
4 + UMA 150E 7/21 55 7,50 31 (25) 18,1 77,0 0,78 4 × 2,5 3/4 × 2,5
5 + UMA 150E 9/21 69 9,30 29 (23) 21,7 78,1 0,79 4 × 2,5 3/4 × 2,5
6 + UMA 150E 13/21 84 11,50 33 (27) 27,6 80,5 0,75 4 × 2,5 3/4 × 2,5
7 + UMA 150E 13/21 97 13,00 28 (22) 30,1 80,3 0,78 4 × 2,5 3/4 × 2,5
8 + UMA 150E 15/21 111 15,00 29 (23) 33,4 81,3 0,80 4 × 4,0 3/4 × 2,5
9 + UMA 150E 18/21 125 17,50 28 (21) 40,4 81,9 0,76 4 × 4,0 3/4 × 2,5
10 + UMA 150E 22/21 140 20,00 32 (26) 45,9 83,4 0,75 4 × 4,0 3/4 × 2,5
11 + UMA 150E 22/21 153 21,00 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
12 + UMA 150E 26/21 168 23,00 35 (30) 52,0 84,8 0,75 4 × 6,0 3/4 × 4,0
13 + UMA 150E 26/21 181 25,00 32 (26) 55,2 84,5 0,77 4 × 6,0 3/4 × 4,0
3400.5/10-EN

24 UPA 150C
Water Supply

Connection types
– G4
– DN 65
– DN 80

LA* = LA - LG + LG*
pump end:
▪ G 3: ▪ DN 65:
LG* = 48 mm LG* = 77 mm
▪ G 4: ▪ DN 80:
LG* = 93 mm LG* = 77 mm
Dmax
G3
LG
LP
LA
Operating range
Qmin = 32 m3/h
3400.5/10-EN
UPA 150C 25
Water Supply

installation
Horizontal24)
DOL DOL Y-Δ
Vertical
60/14 - - - - - 1906 3000 48 146 147 125,1 ✘ -25)

60/15 - - - - - 2019 3213 48 146 147 137 ✘ -25)
60/16 - - - - - 2132 3326 48 146 147 140 ✘ -25)
60/17 - - - - - 2245 3519 48 145 147 149 ✘ -25)
60/18 - - - - - 2358 3632 48 145 147 151 ✘ -25)
60/19 - - - - - 2471 3745 48 145 147 154 ✘ -25)
60/20 - - - - - 2584 3858 48 145 147 156 ✘ -25)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
[m] [kW] [°C] [A] [%] [mm2] [mm2]
UMA motor
14 + UMA 150E 26/21 194 26,00 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
15 + UMA 150E 30/21 210 29,00 31 (25) 65,2 84,2 0,76 4 × 6,0 3/4 × 4,0
16 + UMA 150E 30/21 223 30,00 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
17 + UMA 150E 37/22 237 33,00 43 (37) 75,0 83,8 0,76 3/4 × 4,026) 3/4 × 4,0
18 + UMA 150E 37/22 251 35,00 40 (34) 78,2 83,6 0,77 3/4 × 4,026) 3/4 × 4,0
19 + UMA 150E 37/22 264 36,00 39 (32) 79,9 83,4 0,78 3/4 × 4,026) 3/4 × 4,0
20 + UMA 150E 37/22 277 37,00 38 (31) 81,6 83,3 0,79 3/4 × 4,026) 3/4 × 4,0
3400.5/10-EN

25) On request
26) Parallel cable
26 UPA 150C
Water Supply
Scope of supply ▪ Extension cable optional: connected or supplied but not

Depending on the model, the following items are included in fitted
the scope of supply: ▪ Cable connector
▪ Pump set with motor lead ▪ Cable clips
▪ Back-up name plate ▪ Pedestals
Optional: ▪ Cooling shroud, suction shroud or pressure shroud
▪ Supporting clamps and mounting clamps
▪ Electrical protection equipment
▪ Automatic control units
Accessories
Pump accessories
Overview of pump accessories
Description Connection / Quantity Mat. No. [kg]
length
Pump end, Flanged DN 50, PN 16 - 40 Per piece 01116438 3,3
DN 65, PN 16 - 40 Per piece 01116439 3,6
DN 80, PN 16 - 40 Per piece 01116440 4,1
Pump end, Screw-ended G3" Per piece 01124645 0,9
G4" Per piece 01124644 1,4
Supporting and installation clamps R 2" / DN 50 Per pair 95000294 3,4
R 2 1/2" / DN 65 Per pair 95000296 12
R 3" / DN 80 Per pair 95000298 12
R 4" / DN 100 Per pair 95000300 21
Pedestals, shaft centreline height 95 mm for UMA 150E motor Per set 01117821 1,5
Cable tie, Size 1 Per piece 01088095 0,04
Power cable, round, drinking water 4 x 1,5 mm² Per metre 90068174 0,18
(with earth conductor) 4 x 2,5 mm² Per metre 90068175 0,259
4 x 4 mm² Per metre 90068176 0,356
4 x 6 mm² Per metre 90068177 0,6
4 x 10 mm² Per metre 90068178 1,1
4 x 16 mm² Per metre 90068179 1,22
4 x 25 mm² Per metre 90068180 1,8
4 x 35 mm² Per metre 90068181 2,3
4 x 50 mm² Per metre 90068182 3,2
4 x 70 mm² Per metre 90068183 4,4
Power cable, drinking water 3 x 1.5 mm² Per metre 90068148 0,1
(without earth conductor) 3 x 2.5 mm² Per metre 90068149 0,2
3 x 4 mm² Per metre 90068150 0,2
3 x 6 mm² Per metre 90068151 0,3
3 x 10 mm² Per metre 90068152 0,6
3 x 16 mm² Per metre 90068153 0,8
3 x 25 mm² Per metre 90068154 1,1
3 x 35 mm² Per metre 90068155 1,4
3 x 50 mm² Per metre 90068156 2,1
3 x 70 mm² Per metre 90068157 2,8
Cable kit for 3~ motors DN 100, 4-core, flat, 4 x 1.5 mm²27), for L=5m Per set 1712501 0,7
material variants C1 and C2 L = 10 m Per set 1712502 1,3
3400.5/10-EN
L = 15 m Per set 1712503 2,07

L = 20 m Per set 1712504 2,74
L = 25 m Per set 1712505 3,3
L = 30 m Per set 1712506 4,1
L = 35 m Per set 1712507 4,77
L = 40 m Per set 1712508 5,54
27) Specify the material number of the pump when ordering.
UPA 150C 27
Water Supply
Description Connection / Quantity Mat. No. [kg]

length
Cable kit for 3~ motors DN 100, 4-core, round, 4 x 1.5 mm²27), for L=5m Per set 1431841 0,7
material variant C1 L = 10 m Per set 1435407 1,3
L = 15 m Per set 1435408 2,07
L = 20 m Per set 1435409 2,74
L = 25 m Per set 1435410 3,3
L = 30 m Per set 1435411 4,1
L = 35 m Per set 1435412 4,77
L = 40 m Per set 1435413 5,54
Cable connector size 28 For 1 × motor lead to 1 × extension cable 95005106 0,5
Cable connector size 28 includes connection and sealing For 1 × motor lead to 1 × extension cable 90049385 0,5
Cable connector size 43 For 2 × motor leads to 1 × extension cable 90049400 0,8
Cable connector size 43 includes connection and sealing For 2 × motor leads to 1 × extension cable 90049390 0,8
Cable connector size 53 For 2 × motor leads to 1 × extension cable 90049401 1
Cable connector size 53 includes connection and sealing For 1 × motor lead to 1 × extension cable 90049391 1
Dry running protection device Fully automatic operation Per set 90009554 2
(with 1 relay and 3 electrodes)
Dry running protection device Semi-automatic operation Per set 90009553 2
(with 1 relay, 1 pressure switch)
Control cabinet UPA Control
For DOL starting, temperature-compensated, insulating enclosure
With 4 PG cable glands for round cables
3 immersion electrodes and integrated selector switch for "Dry running protection" or "Water level control" operation, as well as
with thermal overcurrent relay with phase failure protection, for motor sizes:
1~230 V 3~400 V
- 0,37 kW - 40980887 3,5
- 0,55 + 0,75 kW - 40980889 3,5
- 1,10 + 1,50 kW - 40980891 3,5
0,55 kW - - 40980893 3,5
0,75 kW 2,20 kW - 40980895 3,5
1,10 kW 3,00 + 3,70 kW - 40980897 3,5
1,50 kW - - 40980899 3,5
2,20 kW 5,50 kW - 40984811 3,5
- 7,50 kW - 90052649 3,5
- UMA 150E - 5/21 - 40984811 3,5
- UMA 150E - 7/21 - 90052649 3,5
Lightning protection For 3~400 V Per set 00533299 0,3
Pressure controller 0 - 8 bar Per piece 01151586 1
Motor accessories
Description Mat. No. [kg]
Fill check kit, for checking and topping up the motor fill after prolonged 90066762 0,25
storage for UMA 150D, UMA 150E, UMA 200D, UMA 250D
Automatic control units

3400.5/10-EN
Cervomatic EDP.2 automatic control unit 01185581 2,5
Controlmatic E automatic control unit 90053395 1,3
28 UPA 150C
Water Supply
Cooling shroud made of stainless steel 1.4301

UPA Motor type 3~ Cooling shroud Suction strainer
150C 400 V
DN UMA Ø × length Vertical installation Horizontal Ø × length Mat. No. [kg]
100 150E installation
(including
pedestals)
[kW] [kW] [mm] Mat. No. [kg] Mat. No. [kg] [mm]
16/... ≤ 1,5 - Ø 160 (180) × 450 01138258 2,5 01138255 4,9 Ø 160 × 158 01138982 0,5
30/... ≤ 2,2 - Ø 160 (180) × 500 01138259 2,7 01138256 5,1 Ø 160 × 158 01138982 0,5
≤ 3,0 - Ø 160 (180) × 625 01138260 3,8 01138317 6,2 Ø 160 × 158 01138982 0,5
≤ 5,5 - Ø 160 (180) × 800 01138261 3,9 01138318 6,3 Ø 160 × 158 01138982 0,5
≤ 7,5 - Ø 160 (180) × 1000 01315559 6,4 - - Ø 160 × 158 01138982 0,5
- ≤ 9,3 Ø 180 (200) × 800 01584802 5,5 01584805 7,9 Ø 180 × 192 01138984 0,6
- ≤ 18,5 Ø 180 (200) × 1000 01584806 6 01584817 9,6 Ø 180 × 192 01138984 0,6
- ≤ 26,0 Ø 180 (200) × 1250 01584818 8,6 01584819 12,2 Ø 180 × 192 01138984 0,6
- ≤ 37,0 Ø 180 (200) × 1500 01584820 10,6 01584821 14,2 Ø 180 × 192 01138984 0,6
48/... ≤ 2,2 - Ø 180 (200) × 500 01138262 3,7 01138319 6,1 Ø 180 × 192 01138984 0,6
60/... ≤ 3,0 - Ø 180 (200) × 625 01138263 4 01138320 6,4 Ø 180 × 192 01138984 0,6
≤ 5,5 - Ø 180 (200) × 800 01138264 5,5 01138321 7,9 Ø 180 × 192 01138984 0,6
≤ 7,5 - Ø 180 (200) × 1000 01315560 7,5 - - Ø 180 × 192 01138984 0,6
- ≤ 9,3 Ø 200 (220) × 800 01584822 5,8 01584823 8,5 Ø 200 × 192 01138985 0,8
- ≤ 18,5 Ø 200 (220) × 1000 01584842 6,3 01584843 10,3 Ø 200 × 192 01138985 0,8
- ≤ 26,0 Ø 200 (220) × 1250 01584844 11 01584845 15 Ø 200 × 192 01138985 0,8
- ≤ 37,0 Ø 200 (220) × 1500 01584846 12,4 01584867 16,4 Ø 200 × 192 01138985 0,8
Cooling shroud in material variant C2 on request

3400.5/10-EN
UPA 150C 29
Water Supply
Design details
UPA 200, 200B, 250C
Design
▪ Single-entry
stages)
Drive
Asynchronous motor:
▪ Frequency 50 Hz
Main applications ▪ IP68 enclosure
▪ Water supply systems ▪ DOL starting or star-delta starting
▪ Spray irrigation systems ▪ Frequency of starts
▪ Mining – UMA 150E: 15 starts per hour
▪ General irrigation systems – UMA 200D, UMA 250D: 10 starts per hour
– UMA 300D: 5 starts per hour
▪ Pressure boosting
▪ Winding J1 (PVC) or, for higher temperatures, J2 (VPE /
▪ Fire-fighting systems XLPE)
▪ Lowering groundwater levels Synchronous motor:
▪ Interior (buried) permanent magnet synchronous motor
(IPMSM)
Fluids handled ▪ IP68 enclosure
▪ Drinking water
▪ Cooling water
▪ Winding J2 (VPE / XLPE)
▪ River water, lake water and groundwater
▪ Frequency of starts ≤ 15 starts per hour
28)
▪ Seawater
▪ Max. permissible sand content of the fluid 50 g/m³ Electrical connection
▪ Delivered ex-factory with 1 or 2 motor leads (including
Operating data earth conductor and internal earthing)
▪ Extension cable connected with water-tight cable
Operating properties connector
Characteristic Value ▪ Motor lead and extension cable suitable for drinking
Flow rate Q [m3/h] ≤ 330 water use
Q [l/s] ≤ 92
Head H [m] ≤ 460 Impeller type
Fluid temperature T [°C] ≤ +50 ▪ Radial or mixed flow versions
Speed n [rpm] ≤ 2900
Well diameter D [mm] 200/250 Bearings
D [″] 8/10 ▪ Radial plain bearings
▪ Pump bearings lubricated by fluid handled; motor
3400.5/10-EN

the motor (lower end)
▪ 1 intermediate bearing in the pump, depending on the
pump size and the number of stages
28) Only for pumps in material variant C3 (duplex)
30 UPA 200, 200B, 250C

Water Supply
Connections ▪ With lift check valve or connection branch

▪ Pump screw-ended or flanged
Designation
Example: UPA 200B - 80B / 5d

Designation key
Code Description
200 Minimum well diameter [mm]
B Design status
80 Flow rate at best efficiency point [m³/h]
B Impeller material (e.g. B = bronze)
5 Number of stages
d Trimmed impellers
Materials
Material selection for UPA 200 pumps
G B
Casing Grey cast iron (EN-GJL-200) Bronze (CC480K-DW)
Impeller Glass fibre reinforced Noryl (PPO)
Screws, bolts and nuts CrNiMo steel (A4-70)
Shaft Chrome steel (1.4021) CrNiMo steel (1.4462)
Material selection for UPA 200B and 250C pumps

G B C3
Casing Grey cast iron (EN-GJL-250) Bronze (CC480K-DW) CrNiMo steel (1.4517)
Impeller 200B Glass fibre reinforced Noryl (PPO) / bronze (CC480K-DW) CrNiMo steel (1.4517)
250C Bronze (CC480K-DW) CrNiMo steel (1.4517)
Screws, bolts and nuts CrNiMo steel (A4-70) CrNiMo steel (1.4462)
Shaft Chrome steel (1.4021) CrNiMo steel (1.4462) CrNiMo steel (1.4462)
Material selection for UMA 150E, 200D, 250D, 300D motors

G C1 C2 C3
Casing 150E - CrNi steel (1.4301) CrNiMo steel (1.4571) CrNiMo steel (1.4539)
200D Grey cast iron (EN- - CrNiMo steel (1.4408) CrNiMo steel (1.4539)
GJL-200)
250D Grey cast iron (EN- - CrNiMo steel (1.4408) CrNiMo steel (1.4539)
GJL-200)
300D Grey cast iron (EN- - - CrNiMo steel (1.4517)
GJL-250)
Screws, bolts and 150E - CrNiMo steel (A4-70) CrNiMo steel (A4-70) CrNiMo steel (1.4539)
nuts 200D CrNiMo steel (A4-70) - CrNiMo steel (A4-70) CrNiMo steel (1.4539)
250D CrNiMo steel (A4-70) - CrNiMo steel (A4-70) CrNiMo steel (1.4539)
300D CrNiMo steel (1.4571) - - CrNiMo steel (1.4462)
Shaft 150E - CrNi steel (1.4021)29) / CrNiMo steel (1.4462) CrNiMo steel (1.4462)
CrNiMo steel (1.4462)30)
3400.5/10-EN
200D CrNiMo steel (1.4460) - CrNiMo steel (1.4462) CrNiMo steel (1.4462)
250D CrNiMo steel (1.4460) - CrNiMo steel (1.4462) CrNiMo steel (1.4462)
300D CrNiMo steel (1.4462) - - CrNiMo steel (1.4462)
29) For motors < 18.5 kW

30) For motors ≥ 18.5 kW
UPA 200, 200B, 250C 31

Water Supply
Coating and preservation

Only for pump sets in material variant grey cast iron.
▪ 2-component high-build coating, epoxy resin base paint
– Coating structure: primer and top coat
– Film thickness: 100 to 150 µm
– Colour: ultramarine blue (RAL 5002)
Product benefits
▪ High efficiencies through optimised hydraulic design
▪ High operating reliability and a long service life by
integrated sand separator, robust wear rings and enclosed
pump bearings
▪ Durable, completely maintenance-free design with
hydrodynamic bearings
▪ Low noise level
3400.5/10-EN
32 UPA 200, 200B, 250C

Water Supply
Product information Product information as per Regulation No.

1907/2006 (REACH)

▪ Tolerance to ISO 9906 Cl. 3B, < 10 kW
curves.
Certifications
Overview
All countries Certified quality management
to ISO 9001
France French drinking water

approval
31)
3400.5/10-EN
31) Valid for pump materials G and B and motor materials G, C1, C2 and C3
UPA 200, 200B, 250C 33

Water Supply
Technical data
Selection chart
n = 2900 rpm
UPA 250C-150
UPA 250C-120
UPA 200-14
UPA 200B-80
UPA 200-11 UPA 250C-250
UPA 200B-130
UPA 250C-120 UPA 250C-250

UPA 200B-80 UPA 250C-150
UPA 200-11 UPA 200-14
UPA 200B-130
3400.5/10-EN
Fig. 2: Selection chart UPA 200, 200B, 250C

Selection charts or characteristic curves for UPA in material variant C3 (duplex) only on request.
34 UPA 200, 200B, 250C

Water Supply
UPA 200 - 11 / ...

Types of connection
Connection types:
– DN 80

The length of the pump set LA and the diameter
Dmax depend on the pump end.
For an alternative pump end the length of the
pump set LA* is calculated as follows:
LA* = LA - LG + LG*
Values for calculating the dimensions if using a
different pump end:
▪ G 3:
LG* = 200 mm
Dmax* ≙ Dmax
▪ DN 80:
LG* = 200 mm
Dmax* = 200 mm
Dmax
G3
LG
LP
Optimum impeller Ø "d" Maximum

impeller Ø
LA
Operating range
Qmin = 8 m3/h
3400.5/10-EN
200
Ø13,5
A 220 320
Dimensions of UPA 200 - 11 / ... [mm]
UPA 200, 200B, 250C 35

Water Supply

UPA 200 - 11 A LP LA LG32) Dmax Total weight Type of
installation
Horizontal33)
DOL Y-Δ Material variant
G B C3
Vertical
[mm] [mm] [mm] [mm] [mm] [mm] [kg] [kg] [kg]
1e + UMA 150E 5/21 635 515 1194 200 192 195 75 80 - ✘ ✘

1d + UMA 150E 5/21 635 515 1194 200 192 195 75 80 - ✘ ✘
1 + UMA 150E 5/21 635 515 1194 200 192 195 75 80 - ✘ ✘
2e + UMA 150E 5/21 700 580 1259 200 192 195 79 85 - ✘ ✘
2c + UMA 150E 5/21 700 580 1259 200 192 195 79 85 - ✘ ✘
2 + UMA 150E 7/21 710 580 1279 200 192 195 81 87 - ✘ ✘
3d + UMA 150E 7/21 775 645 1344 200 192 195 85 92 - ✘ ✘
3 + UMA 150E 9/21 790 645 1374 200 192 195 88 95 - ✘ ✘
4c + UMA 150E 13/21 895 710 1519 200 192 195 100 108 - ✘ ✘
4 + UMA 150E 13/21 895 710 1519 200 192 195 100 108 - ✘ ✘
5b + UMA 150E 13/21 960 775 1584 200 192 195 104 112 - ✘ ✘
5 + UMA 150E 15/21 980 775 1629 200 193 195 109 117 - ✘ ✘
6b + UMA 150E 15/21 1045 840 1694 200 193 195 113 122 - ✘ ✘
6 + UMA 150E 18/21 1070 840 1739 200 193 195 117 126 - ✘ ✘
7 + UMA 150E 22/21 1180 905 1894 200 193 195 130 140 - ✘ ✘
8 + UMA 150E 26/21 1295 970 2064 200 194 196 146 156 - ✘ ✘
9 + UMA 150E 26/21 1360 1035 2129 200 194 196 150 161 - ✘ ✘
10 + UMA 150E 30/21 1475 1100 2294 200 194 196 164 176 - ✘ ✘
11 + UMA 150E 37/22 - 1165 2439 200 196 196 175 188 - ✘ -34)
12 + UMA 150E 37/22 - 1230 2504 200 196 196 179 193 - ✘ -34)
13 + UMA 150E 37/22 - 1295 2569 200 196 196 184 197 - ✘ -34)
14 + UMA 200D 45/21 1755 1360 2590 200 199 199 244 258 - ✘ ✘
Technical data
UPA 200 - 11 Pump Motor Motor lead, flat
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1e + UMA 150E 5/21 19 2,5 45 (42) 10,0 69,2 0,53 4 × 2,5 3/4 × 2,5
1d + UMA 150E 5/21 20 2,5 45 (42) 10,0 69,2 0,53 4 × 2,5 3/4 × 2,5
1 + UMA 150E 5/21 23 3,5 44 (41) 10,9 74,9 0,62 4 × 2,5 3/4 × 2,5
2e + UMA 150E 5/21 36 4,5 41 (38) 12,2 76,5 0,70 4 × 2,5 3/4 × 2,5
2c + UMA 150E 5/21 41 5,5 37 (32) 13,8 76,1 0,76 4 × 2,5 3/4 × 2,5
2 + UMA 150E 7/21 45 6,0 38 (34) 15,5 78,0 0,72 4 × 2,5 3/4 × 2,5
3d + UMA 150E 7/21 59 7,0 33 (28) 17,2 77,0 0,77 4 × 2,5 3/4 × 2,5
3 + UMA 150E 9/21 66 9,0 30 (24) 21,2 78,3 0,79 4 × 2,5 3/4 × 2,5
4c + UMA 150E 13/21 83 10,0 37 (32) 25,3 80,6 0,71 4 × 2,5 3/4 × 2,5
4 + UMA 150E 13/21 89 12,0 31 (26) 28,4 80,5 0,76 4 × 2,5 3/4 × 2,5
5b + UMA 150E 13/21 103 12,5 30 (24) 29,2 80,4 0,77 4 × 2,5 3/4 × 2,5
5 + UMA 150E 15/21 110 14,5 30 (34) 32,5 81,4 0,79 4 × 4,0 3/4 × 2,5
6b + UMA 150E 15/21 123 15,0 29 (23) 33,4 81,3 0,80 4 × 4,0 3/4 × 2,5
6 + UMA 150E 18/21 133 17,5 28 (21) 40,4 81,9 0,76 4 × 4,0 3/4 × 2,5
7 + UMA 150E 22/21 155 21,0 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
8 + UMA 150E 26/21 178 24,0 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
9 + UMA 150E 26/21 199 26,0 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
10 + UMA 150E 30/21 222 29,0 31 (25) 65,2 84,2 0,76 4 × 6,0 3/4 × 4,0
11 + UMA 150E 37/22 245 32,0 44 (38) 73,4 83,9 0,75 3/4 × 4,0 35) 3/4 × 4,0
12 + UMA 150E 37/22 266 35,0 40 (34) 78,2 83,6 0,77 3/4 × 4,0 35) 3/4 × 4,0
13 + UMA 150E 37/22 286 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,0 35) 3/4 × 4,0
14 + UMA 200D 45/21 315 42,0 30 (25) 85,0 86,1 0,83 3/4 × 6,0 36) 3/4 × 6,0
3400.5/10-EN

34) On request
35) Parallel cable
36) Delta configuration in cable connector or control cabinet
36 UPA 200, 200B, 250C

Water Supply
UPA 200 - 14 / ...

Types of connection
Connection types:
– DN 80

LA* = LA - LG + LG*
different pump end:
▪ G 3:
LG* = 200 mm
Dmax* ≙ Dmax
▪ DN 80:
LG* = 200 mm
Dmax* = 200 mm
Dmax
G3
LG
LP

impeller Ø
LA
Operating range
Qmin = 10 m3/h
3400.5/10-EN
200
Ø13,5
A 220 320
UPA 200, 200B, 250C 37

Water Supply

installation
Horizontal38)
G B C3
Vertical
1e + UMA 150E 5/21 650 530 1209 200 192 195 76 81 - ✘ ✘

1d + UMA 150E 5/21 650 530 1209 200 192 195 76 81 - ✘ ✘
1 + UMA 150E 5/21 650 530 1209 200 192 195 76 81 - ✘ ✘
2e + UMA 150E 7/21 740 610 1309 200 192 195 83 89 - ✘ ✘
2d + UMA 150E 7/21 740 610 1309 200 192 195 83 89 - ✘ ✘
2 + UMA 150E 9/21 755 610 1339 200 192 195 86 92 - ✘ ✘
3d + UMA 150E 13/21 875 690 1499 200 192 195 99 106 - ✘ ✘
3 + UMA 150E 13/21 875 690 1499 200 192 195 99 106 - ✘ ✘
4c + UMA 150E 15/21 975 770 1624 200 193 195 109 117 - ✘ ✘
4 + UMA 150E 18/21 1000 770 1669 200 193 195 113 121 - ✘ ✘
5c + UMA 150E 18/21 1080 850 1749 200 193 195 118 127 - ✘ ✘
5 + UMA 150E 22/21 1125 850 1839 200 193 195 127 136 - ✘ ✘
6c + UMA 150E 22/21 1205 930 1919 200 193 195 132 142 - ✘ ✘
6 + UMA 150E 26/21 1255 930 2024 200 194 196 143 153 - ✘ ✘
7c + UMA 150E 26/21 1335 1010 2104 200 194 196 148 159 - ✘ ✘
7 + UMA 150E 30/21 1385 1010 2204 200 194 196 158 169 - ✘ ✘
8 + UMA 150E 37/22 - 1090 2364 200 196 196 170 182 - ✘ -39)
9 + UMA 150E 37/22 - 1170 2444 200 196 196 176 188 - ✘ -39)
10 + UMA 200D 45/21 1645 1250 2480 200 199 199 237 250 - ✘ ✘
11 + UMA 200D 55/21 1780 1330 2670 200 199 199 262 277 - ✘ ✘
12 + UMA 200D 55/21 1860 1410 2750 200 199 199 267 282 - ✘ ✘
13 + UMA 200D 55/21 1940 1490 2830 200 199 199 272 288 - ✘ ✘
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1e + UMA 150E 5/21 18 3,0 45 (42) 10,4 72,7 0,57 4 × 2,5 3/4 × 2,5
1d + UMA 150E 5/21 21 3,5 44 (41) 10,9 74,9 0,62 4 × 2,5 3/4 × 2,5
1 + UMA 150E 5/21 25 4,5 41 (38) 12,2 76,5 0,70 4 × 2,5 3/4 × 2,5
2e + UMA 150E 7/21 35 6,0 38 (34) 15,5 78,0 0,72 4 × 2,5 3/4 × 2,5
2d + UMA 150E 7/21 42 7,0 33 (28) 17,2 77,0 0,77 4 × 2,5 3/4 × 2,5
2 + UMA 150E 9/21 50 8,5 32 (27) 20,3 78,5 0,77 4 × 2,5 3/4 × 2,5
3d + UMA 150E 13/21 65 10,5 35 (30) 26,1 80,6 0,72 4 × 2,5 3/4 × 2,5
3 + UMA 150E 13/21 75 12,5 30 (24) 29,2 80,4 0,77 4 × 2,5 3/4 × 2,5
4c + UMA 150E 15/21 90 14,5 30 (24) 32,5 81,4 0,79 4 × 4,0 3/4 × 2,5
4 + UMA 150E 18/21 101 17,0 29 (22) 39,6 82,0 0,76 4 × 4,0 3/4 × 2,5
5c + UMA 150E 18/21 113 18,0 26 (19) 41,2 81,8 0,77 4 × 4,0 3/4 × 2,5
5 + UMA 150E 22/21 126 21,0 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
6c + UMA 150E 22/21 136 22,0 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
6 + UMA 150E 26/21 151 25,0 32 (26) 55,2 84,5 0,77 4 × 6,0 3/4 × 4,0
7c + UMA 150E 26/21 159 26,0 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
7 + UMA 150E 30/21 177 30,0 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
8 + UMA 150E 37/22 202 34,0 41 (35) 76,6 83,7 0,77 3/4 × 4,0 40) 3/4 × 4,0
9 + UMA 150E 37/22 225 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,0 40) 3/4 × 4,0
10 + UMA 200D 45/21 255 44,0 30 (24) 89,0 86,0 0,84 3/4 × 6,0 41) 3/4 × 6,0
11 + UMA 200D 55/21 283 48,0 33 (27) 98,0 87,2 0,82 3/4 × 6,0 41) 3/4 × 6,0
12 + UMA 200D 55/21 307 52,0 30 (24) 104,0 87,1 0,83 3/4 × 6,0 41) 3/4 × 6,0
13 + UMA 200D 55/21 331 55,0 27 (21) 109,0 86,9 0,84 3/4 × 6,0 41) 3/4 × 6,0
3400.5/10-EN

39) On request
40) Parallel cable
38 UPA 200, 200B, 250C

Water Supply
UPA 200B - 80 / ...

Types of connection
Connection types:
– DN 125

LA* = LA - LG + LG*
different pump end:
▪ G 5:
LG* = 200 mm
Dmax* ≙ Dmax
▪ DN 125:
LG* = 150 mm
Dmax* = 250 mm (PN 10/16)
Dmax* = 270 mm (PN 25/40)
Dmax
G5
LG
LP
Optimum
Maximum
impeller Ø "f"
impeller Ø
LA
Operating range
Qmin = 15 m3/h
3400.5/10-EN
Dimensions of UPA 200B - 80 / ... [mm]
UPA 200, 200B, 250C 39

Water Supply

UPA 200B - 80 A LP LA LG42) Dmax Total weight Type of
installation
Horizontal43)
G B C3
Vertical
1g + UMA 150E 5/21 610 582 1261 200 193 196 81 88 89 ✘ ✘

1f + UMA 150E 7/21 620 582 1281 200 193 196 83 90 91 ✘ ✘
1d + UMA 150E 7/21 620 582 1281 200 193 196 83 90 91 ✘ ✘
1 + UMA 150E 9/21 635 582 1311 200 193 196 86 93 94 ✘ ✘
2g + UMA 150E 13/21 810 714 1523 200 193 196 104 114 115 ✘ ✘
2f + UMA 150E 13/21 810 714 1523 200 193 196 104 114 115 ✘ ✘
2d + UMA 150E 15/21 830 714 1568 200 194 196 109 119 120 ✘ ✘
2 + UMA 150E 18/21 855 714 1613 200 194 196 113 123 124 ✘ ✘
3f + UMA 150E 18/21 985 846 1745 200 194 196 124 135 136 ✘ ✘
3e + UMA 150E 18/21 985 846 1745 200 194 196 124 135 136 ✘ ✘
3d + UMA 150E 22/21 1030 846 1835 200 194 196 133 144 145 ✘ ✘
3 + UMA 150E 22/21 1030 846 1835 200 194 196 133 144 145 ✘ ✘
4e + UMA 150E 26/21 1215 978 2072 200 195 198 154 167 169 ✘ ✘
4c + UMA 150E 30/21 1265 978 2172 200 195 198 164 177 179 ✘ ✘
4 + UMA 150E 30/21 1265 978 2172 200 195 198 164 177 179 ✘ ✘
5d + UMA 150E 37/22 - 1110 2384 200 198 198 182 197 199 ✘ -44)
5 + UMA 150E 37/22 - 1110 2384 200 198 198 182 197 199 ✘ -44)
6c + UMA 200D 45/21 1550 1242 2475 200 201 201 249 266 268 ✘ ✘
6 + UMA 200D 45/21 1550 1242 2475 200 201 201 249 266 268 ✘ ✘
7c + UMA 200D 55/21 1735 1374 2715 200 201 201 280 298 301 ✘ ✘
7 + UMA 200D 55/21 1735 1374 2715 200 201 201 280 298 301 ✘ ✘
8c + UMA 200D 55/21 1865 1506 2845 200 201 201 290 311 313 ✘ ✘
8 + UMA 200D 65/21 1930 1506 2975 200 205 205 313 334 336 ✘ ✘
9 + UMA 200D 75/21 - 1638 3200 200 205 205 340 362 365 ✘ -44)
10 + UMA 200D 75/21 - 1770 3330 200 205 205 350 374 377 ✘ -44)
11 + UMA 200D 90/21 - 1902 3645 200 211 211 394 420 423 ✘ -44)
12 + UMA 200D 90/21 - 2034 3775 200 211 211 404 432 436 ✘ -44)
Technical data
UPA 200B - 80 Pump Motor Motor lead, flat
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1g + UMA 150E 5/21 20 5,5 37 (32) 13,8 76,1 0,76 4 × 2,5 3/4 × 2,5
1f + UMA 150E 7/21 24 6,0 38 (34) 15,5 78,0 0,72 4 × 2,5 3/4 × 2,5
1d + UMA 150E 7/21 25 7,5 31 (25) 18,1 77,0 0,78 4 × 2,5 3/4 × 2,5
1 + UMA 150E 9/21 27 8,0 34 (30) 19,4 78,7 0,76 4 × 2,5 3/4 × 2,5
2g + UMA 150E 13/21 39 10,5 35 (30) 26,1 80,6 0,72 4 × 2,5 3/4 × 2,5
2f + UMA 150E 13/21 44 12,0 31 (26) 28,4 80,5 0,76 4 × 2,5 3/4 × 2,5
2d + UMA 150E 15/21 48 14,5 30 (24) 32,5 81,4 0,79 4 × 4,0 3/4 × 2,5
2 + UMA 150E 18/21 53 16,0 31 (25) 38,0 82,1 0,74 4 × 4,0 3/4 × 2,5
3f + UMA 150E 18/21 67 16,0 31 (25) 38,0 82,1 0,74 4 × 4,0 3/4 × 2,5
3e + UMA 150E 18/21 70 18,0 26 (19) 41,2 81,8 0,77 4 × 4,0 3/4 × 2,5
3d + UMA 150E 22/21 73 20,0 32 (26) 45,9 83,4 0,75 4 × 4,0 3/4 × 2,5
3 + UMA 150E 22/21 78 22,0 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
4e + UMA 150E 26/21 94 24,0 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
4c + UMA 150E 30/21 99 28,0 32 (26) 53,6 84,3 0,75 4 × 6,0 3/4 × 4,0
4 + UMA 150E 30/21 104 30,0 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
5d + UMA 150E 37/22 122 33,0 43 (37) 75,0 83,8 0,76 3/4 × 4,0 45) 3/4 × 4,0
5 + UMA 150E 37/22 129 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,0 45) 3/4 × 4,0
6c + UMA 200D 45/21 150 44,0 30 (24) 89,0 86,0 0,84 3/4 × 6,0 46) 3/4 × 6,0
6 + UMA 200D 45/21 158 45,0 27 (20) 90,0 86,0 0,84 3/4 × 6,0 46) 3/4 × 6,0
3400.5/10-EN
7c + UMA 200D 55/21 176 50,0 31 (25) 101,0 87,2 0,83 3/4 × 6,0 46) 3/4 × 6,0
7 + UMA 200D 55/21 185 54,0 28 (22) 108,0 87,0 0,84 3/4 × 6,0 46) 3/4 × 6,0
8c + UMA 200D 55/21 200 55,0 26 (20) 109,0 86,9 0,84 3/4 × 6,0 46) 3/4 × 6,0
8 + UMA 200D 65/21 213 62,0 30 (23) 123,0 87,7 0,83 3/4 × 10 46) 3/4 × 10

44) Horizontal installation on request and only with pedestals in special design
45) Parallel cable
40 UPA 200, 200B, 250C

Water Supply
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
[m] [kW] [°C] [A] [%] [mm2] [mm2]
9 + UMA 200D 75/21 239 70,0 27 (20) 143,0 87,4 0,81 3/4 × 10 46) 3/4 × 10
10 + UMA 200D 75/21 264 75,0 22 (15) 151,0 87,3 0,83 3/4 × 10 46) 3/4 × 10
11 + UMA 200D 90/21 292 86,0 27 (20) 173,0 88,1 0,82 3/4 × 16 46) 3/4 × 16
12 + UMA 200D 90/21 317 90,0 23 (16) 181,0 88,0 0,82 3/4 × 16 46) 3/4 × 16
3400.5/10-EN
UPA 200, 200B, 250C 41

Water Supply
3400.5/10-EN
42 UPA 200, 200B, 250C

Water Supply
UPA 200B - 130 / ...

Types of connection
Connection types:
– DN 125

LA* = LA - LG + LG*
different pump end:
▪ G 5:
LG* = 200 mm
Dmax* ≙ Dmax
▪ DN 125:
LG* = 150 mm
Dmax* = 250 mm (PN 10/16)
Dmax* = 270 mm (PN 25/40)
Dmax
G5
LG
LP

impeller Ø
LA
Operating range
Qmin = 15 m3/h
3400.5/10-EN
Dimensions of UPA 200B - 130 / ... [mm]
UPA 200, 200B, 250C 43

Water Supply

UPA 200B - 130 A LP LA LG47) Dmax Total weight Type of
installation
Horizontal48)
G B C3
Vertical
1g + UMA 150E 5/21 615 595 1274 200 193 196 80 88 89 ✘ ✘

1e + UMA 150E 7/21 625 595 1294 200 193 196 82 90 91 ✘ ✘
1c + UMA 150E 7/21 625 595 1294 200 193 196 82 90 91 ✘ ✘
1 + UMA 150E 9/21 640 595 1324 200 193 196 85 93 94 ✘ ✘
2g + UMA 150E 13/21 825 740 1549 200 193 196 104 113 115 ✘ ✘
2f + UMA 150E 13/21 825 740 1549 200 193 196 104 113 115 ✘ ✘
2e + UMA 150E 13/21 825 740 1549 200 193 196 104 113 115 ✘ ✘
2d + UMA 150E 15/21 845 740 1594 200 194 196 109 118 120 ✘ ✘
2c + UMA 150E 15/21 845 740 1594 200 194 196 109 118 120 ✘ ✘
2 + UMA 150E 18/21 870 740 1639 200 194 196 113 122 124 ✘ ✘
3e + UMA 150E 18/21 1015 885 1784 200 194 196 123 134 136 ✘ ✘
3d + UMA 150E 22/21 1060 885 1874 200 194 196 132 143 145 ✘ ✘
3c + UMA 150E 22/21 1060 885 1874 200 194 196 132 143 145 ✘ ✘
3b + UMA 150E 26/21 1110 885 1979 200 195 198 143 154 156 ✘ ✘
3 + UMA 150E 26/21 1110 885 1979 200 195 198 143 154 156 ✘ ✘
4d + UMA 150E 30/21 1305 1030 2224 200 195 198 164 177 179 ✘ ✘
4c + UMA 150E 30/21 1305 1030 2224 200 195 198 164 177 179 ✘ ✘
4b + UMA 150E 30/21 1305 1030 2224 200 195 198 164 177 179 ✘ ✘
4 + UMA 150E 37/22 - 1030 2304 200 198 198 171 184 186 ✘ -49)
5c + UMA 150E 37/22 - 1175 2449 200 198 198 184 198 201 ✘ -49)
5b + UMA 150E 37/22 - 1175 2449 200 198 198 184 198 201 ✘ -49)
5 + UMA 200D 45/21 1470 1175 2405 200 201 201 238 252 255 ✘ ✘
6c + UMA 200D 45/21 1615 1320 2550 200 201 201 248 265 269 ✘ ✘
6b + UMA 200D 55/21 1670 1320 2660 200 201 201 268 285 289 ✘ ✘
6 + UMA 200D 55/21 1670 1320 2660 200 201 201 268 285 289 ✘ ✘
7b + UMA 200D 55/21 1815 1465 2805 200 201 201 279 297 301 ✘ ✘
7 + UMA 200D 65/21 1880 1465 2935 200 205 205 302 320 324 ✘ ✘
8 + UMA 200D 75/21 - 1610 3170 200 205 205 328 349 353 ✘ -49)
9 + UMA 200D 75/21 - 1755 3315 200 205 205 339 361 366 ✘ -49)
10 + UMA 200D 90/21 - 1900 3640 200 211 211 382 406 411 ✘ -49)
11 + UMA 200D 90/21 - 2045 3785 200 211 211 393 419 425 ✘ -49)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1g + UMA 150E 5/21 17 5,5 37 (32) 13,8 76,1 0,76 4 × 2,5 3/4 × 2,5
1e + UMA 150E 7/21 20 6,5 36 (31) 16,3 77,0 0,74 4 × 2,5 3/4 × 2,5
1c + UMA 150E 7/21 23 7,5 31 (25) 18,1 77,0 0,78 4 × 2,5 3/4 × 2,5
1 + UMA 150E 9/21 25 9,0 30 (24) 21,2 78,3 0,79 4 × 2,5 3/4 × 2,5
2g + UMA 150E 13/21 34 11,0 34 (29) 26,8 80,6 0,74 4 × 2,5 3/4 × 2,5
2f + UMA 150E 13/21 37 11,5 33 (27) 27,6 80,5 0,75 4 × 2,5 3/4 × 2,5
2e + UMA 150E 13/21 39 13,0 28 (22) 30,1 80,3 0,78 4 × 2,5 3/4 × 2,5
2d + UMA 150E 15/21 42 14,0 32 (26) 31,7 81,5 0,78 4 × 4,0 3/4 × 2,5
2c + UMA 150E 15/21 44 15,0 29 (23) 33,4 81,3 0,80 4 × 4,0 3/4 × 2,5
2 + UMA 150E 18/21 48 17,0 29 (22) 39,6 82,0 0,76 4 × 4,0 3/4 × 2,5
3e + UMA 150E 18/21 58 18,5 25 (18) 42,1 81,6 0,78 4 × 4,0 3/4 × 2,5
3d + UMA 150E 22/21 63 21,0 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
3c + UMA 150E 22/21 66 22,0 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
3b + UMA 150E 26/21 70 24,0 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
3 + UMA 150E 26/21 72 25,0 32 (26) 55,2 84,5 0,77 4 × 6,0 3/4 × 4,0
3400.5/10-EN
4d + UMA 150E 30/21 84 28,0 32 (26) 63,6 84,3 0,75 4 × 6,0 3/4 × 4,0
4c + UMA 150E 30/21 89 30,0 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
4b + UMA 150E 30/21 92 30,0 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
4 + UMA 150E 37/22 96 34,0 41 (35) 76,6 83,7 0,77 3/4 × 4,0 50) 3/4 × 4,0
5c + UMA 150E 37/22 110 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,0 50) 3/4 × 4,0

50) Parallel cable
44 UPA 200, 200B, 250C

Water Supply
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
[m] [kW] [°C] [A] [%] [mm2] [mm2]
5b + UMA 150E 37/22 114 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,0 50) 3/4 × 4,0
5 + UMA 200D 45/21 122 44,0 30 (24) 89,0 86,0 0,84 3/4 × 6,0 51) 3/4 × 6,0
6c + UMA 200D 45/21 135 45,0 28 (21) 90,0 86,0 0,84 3/4 × 6,0 51) 3/4 × 6,0
6b + UMA 200D 55/21 142 48,0 32 (27) 98,0 87,2 0,82 3/4 × 6,0 3/4 × 6,0
6 + UMA 200D 55/21 146 52,0 30 (24) 104,0 87,1 0,83 3/4 × 6,0 51) 3/4 × 6,0
7b + UMA 200D 55/21 164 55,0 27 (21) 109,0 86,9 0,84 3/4 × 6,0 51) 3/4 × 6,0
7 + UMA 200D 65/21 171 60,0 31 (25) 120,0 87,8 0,83 3/4 × 10,0 51) 3/4 × 10,0
8 + UMA 200D 75/21 196 70,0 27 (21) 143,0 87,4 0,81 3/4 × 10,0 51) 3/4 × 10,0
9 + UMA 200D 75/21 219 75,0 23 (15) 151,0 87,3 0,83 3/4 × 10,0 51) 3/4 × 10,0
10 + UMA 200D 90/21 245 86,0 27 (20) 173,0 88,1 0,82 3/4 × 16,0 51) 3/4 × 16,0
11 + UMA 200D 90/21 267 90,0 23 (16) 181,0 88,0 0,82 3/4 × 16,0 51) 3/4 × 16,0
3400.5/10-EN
UPA 200, 200B, 250C 45

Water Supply
3400.5/10-EN
46 UPA 200, 200B, 250C

Water Supply
UPA 250C - 120 / ...

Types of connection
Connection types:
– DN 150

LA* = LA - LG + LG*
different pump end:
▪ G 6:
LG* = 229 mm
Dmax* ≙ Dmax
▪ DN 150:
LG* = 179 mm
Dmax* = 285 mm (PN 10/16)
Dmax* = 300 mm (PN 25/40)
Dmax
G6
LG
LP
Optimum Maximum
impeller Ø "f" impeller Ø
LA
Operating range
Qmin = 20 m3/h
3400.5/10-EN
UPA 200, 200B, 250C 47

Water Supply

UPA 250C - 120 A LP LA LG52) Dmax Total weight Type of
installation
Horizontal53)
G B C3
Vertical
1l + UMA 150E 9/21 700 681 1410 229 230 232 117 129 132 ✘ ✘
1k + UMA 150E 13/21 740 681 1490 229 230 232 125 137 140 ✘ ✘
1g + UMA 150E 13/21 740 681 1490 229 230 232 125 137 140 ✘ ✘
1d + UMA 150E 15/21 765 681 1535 229 230 232 130 142 145 ✘ ✘
1 + UMA 150E 18/21 785 681 1580 229 230 232 134 146 149 ✘ ✘
2l + UMA 150E 18/21 935 828 1727 229 230 232 157 173 173 ✘ ✘
2k + UMA 150E 22/21 980 828 1817 229 230 232 166 182 182 ✘ ✘
2h + UMA 150E 26/21 1030 828 1922 229 232 233 177 193 193 ✘ ✘
2f + UMA 150E 26/21 1030 828 1922 229 232 233 177 193 193 ✘ ✘
2d + UMA 150E 30/21 1080 828 2022 229 232 233 187 203 203 ✘ ✘
2 + UMA 150E 37/22 - 828 2102 229 233 233 194 210 210 ✘ -54)
3h + UMA 150E 37/22 - 975 2249 229 233 233 220 240 236 ✘ -54)
3f + UMA 150E 37/22 - 975 2249 229 233 233 220 240 236 ✘ -54)
3e + UMA 200D 45/21 1245 975 2205 229 235 235 274 294 290 ✘ ✘
3c + UMA 200D 45/21 1245 975 2205 229 235 235 274 294 290 ✘ ✘
3 + UMA 200D 55/21 1300 975 2315 229 235 235 294 314 310 ✘ ✘
4f + UMA 200D 55/21 1450 1122 2465 229 235 235 318 341 334 ✘ ✘
4d + UMA 200D 65/21 1515 1122 2595 229 239 239 341 364 357 ✘ ✘
4 + UMA 200D 75/21 1560 1122 2685 229 239 239 357 380 373 ✘ ✘
5e + UMA 200D 75/21 1705 1269 2830 229 239 239 380 407 397 ✘ ✘
5c + UMA 200D 75/21 1705 1269 2830 229 239 239 380 407 397 ✘ ✘
5 + UMA 200D 90/21 - 1269 3010 229 244 244 412 439 429 ✘ -54)
6c + UMA 250D 110/21 1835 1416 2945 229 257 257 508 540 525 ✘ ✘
6 + UMA 250D 110/21 1835 1416 2945 229 257 257 508 540 525 ✘ ✘
7 + UMA 250D 132/21 - 1563 3220 229 257 257 576 611 592 ✘ -54)
8 + UMA 250D 160/21 - 1710 3480 229 257 266 636 675 653 ✘ -54)
9 + UMA 250D 190/21 - 1857 3775 229 266 280 710 753 727 ✘ -54)
10 + UMA 250D 190/21 - 2004 3925 229 266 280 733 780 751 ✘ -54)
11 + UMA 300D 250/22 - 2151 4225 229 304 304 886 936 898 ✘ -54)
12 + UMA 300D 250/22 - 2298 4370 229 304 304 909 963 922 ✘ -54)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1l + UMA 150E 9/21 29 9,0 30 (24) 21,2 78,3 0,79 4 × 2,5 3/4 × 2,5
1k + UMA 150E 13/21 32 10,5 35 (30) 26,1 80,6 0,72 4 × 2,5 3/4 × 2,5
1g + UMA 150E 13/21 36 12,0 31 (26) 28,4 80,5 0,76 4 × 2,5 3/4 × 2,5
1d + UMA 150E 15/21 40 14,0 32 (26) 31,7 81,5 0,78 4 × 4,0 3/4 × 2,5
1 + UMA 150E 18/21 43 16,5 30 (24) 38,8 82,1 0,75 4 × 4,0 3/4 × 2,5
2l + UMA 150E 18/21 57 18,0 26 (19) 41,2 81,8 0,77 4 × 4,0 3/4 × 2,5
2k + UMA 150E 22/21 62 21,0 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
2h + UMA 150E 26/21 68 24,0 34 (28) 53,6 84,7 0,76 4 × 6,0 3/4 × 4,0
2f + UMA 150E 26/21 72 26,0 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
2d + UMA 150E 30/21 79 29,0 31 (25) 65,2 84,2 0,76 4 × 6,0 3/4 × 4,0
2 + UMA 150E 37/22 84 34,0 41 (35) 76,6 83,7 0,77 3/4 × 4,055) 3/4 × 4,0
3h + UMA 150E 37/22 99 35,0 40 (34) 78,2 83,6 0,77 3/4 × 4,055) 3/4 × 4,0
3f + UMA 150E 37/22 106 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,055) 3/4 × 4,0
3e + UMA 200D 45/21 113 42,0 31 (25) 85,0 86,1 0,83 3/4 × 6,056) 3/4 × 6,0
3c + UMA 200D 45/21 122 45,0 27 (20) 90,0 86,0 0,84 3/4 × 6,056) 3/4 × 6,0
3 + UMA 200D 55/21 125 52,0 30 (24) 104,0 87,1 0,83 3/4 × 6,056) 3/4 × 6,0
3400.5/10-EN
4f + UMA 200D 55/21 145 54,0 29 (23) 108,0 87,0 0,84 3/4 × 6,056) 3/4 × 6,0
4d + UMA 200D 65/21 158 60,0 31 (25) 120,0 87,8 0,83 3/4 × 10,056) 3/4 × 10,0
4 + UMA 200D 75/21 168 70,0 27 (21) 143,0 87,4 0,81 3/4 × 10,056) 3/4 × 10,0
5e + UMA 200D 75/21 189 70,0 27 (21) 143,0 87,4 0,81 3/4 × 10,056) 3/4 × 10,0

55) Parallel cable
48 UPA 200, 200B, 250C

Water Supply
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
[m] [kW] [°C] [A] [%] [mm2] [mm2]
5c + UMA 200D 75/21 203 75,0 22 (14) 151,0 87,3 0,83 3/4 × 10,056) 3/4 × 10,0
5 + UMA 200D 90/21 209 86,0 27 (20) 173,0 88,1 0,82 3/4 × 16,056) 3/4 × 16,0
6c + UMA 250D 110/21 247 95,0 27 (20) 191,0 88,7 0,81 3/4 × 25,056) 3/4 × 25,0
6 + UMA 250D 110/21 251 105,0 23 (15) 208,0 88,6 0,83 3/4 × 25,056) 3/4 × 25,0
7 + UMA 250D 132/21 293 120,0 24 (16) 229,0 89,2 0,85 3/4 × 25,056) 3/4 × 25,0
8 + UMA 250D 160/21 335 140,0 24 (16) 268,0 89,5 0,85 3/4 × 25,055) 3/4 × 35,0
9 + UMA 250D 190/21 380 155,0 25 (17) 309,0 90,0 0,81 3/4 × 35,055)57) 3/4 × 50,057)
10 + UMA 250D 190/21 420 175,0 20 (11) 341,0 89,9 0,83 3/4 × 35,0 55)57) 3/4 × 50,057)
11 + UMA 300D 250/22 471 195,0 58 (52) 366,0 90,6 0,85 2×3×70 + 1×3555)58) 2×3×70 + 1×35 58)
12 + UMA 300D 250/22 513 215,0 56 (50) 398,0 90,7 0,86 2×3×70 + 1×35 55)58) 2×3×70 + 1×3558)
3400.5/10-EN
57) 1 × 3-core, flat and 1 × 4-core, round

UPA 200, 200B, 250C 49

Water Supply
3400.5/10-EN
50 UPA 200, 200B, 250C

Water Supply
UPA 250C - 150 / ...

Types of connection
Connection types:
– DN 150

LA* = LA - LG + LG*
different pump end:
▪ G 6:
LG* = 229 mm
Dmax* ≙ Dmax
▪ DN 150:
LG* = 179 mm
Dmax* = 285 mm (PN 10/16)
Dmax* = 300 mm (PN 25/40)
Dmax
G6
LG
LP
Optimum impeller Ø "g" Maximum

impeller Ø
LA
Operating range
Qmin = 30 m3/h
3400.5/10-EN
UPA 200, 200B, 250C 51

Water Supply

installation
Horizontal60)
G B C3
Vertical
1l + UMA 150E 13/21 745 690 1499 229 230 232 123 135 140 ✘ ✘
1k + UMA 150E 15/21 765 690 1544 229 230 232 128 140 145 ✘ ✘
1d + UMA 150E 18/21 790 690 1589 229 230 232 132 144 149 ✘ ✘
1 + UMA 150E 22/21 835 690 1679 229 230 232 141 153 158 ✘ ✘
2k + UMA 150E 30/21 1095 846 2040 229 232 233 186 202 205 ✘ ✘
2h + UMA 150E 30/21 1095 846 2040 229 232 233 186 202 205 ✘ ✘
2f + UMA 150E 37/22 - 846 2120 229 233 233 193 209 212 ✘ -61)
2c + UMA 150E 37/22 - 846 2120 229 233 233 193 209 212 ✘ -
2 + UMA 200D 45/21 1110 846 2075 229 235 235 247 263 266 ✘ ✘
3h + UMA 200D 45/21 1270 1002 2235 229 235 235 269 288 290 ✘ ✘
3g + UMA 200D 55/21 1325 1002 2345 229 235 235 289 308 310 ✘ ✘
3d + UMA 200D 55/21 1325 1002 2345 229 235 235 289 308 310 ✘ ✘
3b + UMA 200D 65/21 1390 1002 2475 229 239 239 312 331 333 ✘ ✘
3 + UMA 200D 65/21 1390 1002 2475 229 239 239 312 331 333 ✘ ✘
4e + UMA 200D 75/21 1590 1158 2720 229 239 239 351 373 373 ✘ ✘
4c + UMA 200D 75/21 1590 1158 2720 229 239 239 351 373 373 ✘ ✘
4b + UMA 200D 90/21 - 1158 2900 229 244 244 383 405 405 ✘ -
4 + UMA 200D 90/21 - 1158 2900 229 244 244 383 405 405 ✘ -
5c + UMA 250D 110/21 1730 1314 2845 229 257 257 477 503 501 ✘ ✘
5b + UMA 250D 110/21 1730 1314 2845 229 257 257 477 503 501 ✘ ✘
5 + UMA 250D 110/21 1730 1314 2845 229 257 257 477 503 501 ✘ ✘
6c + UMA 250D 132/21 - 1470 3130 229 257 257 543 573 569 ✘ -61)
6b + UMA 250D 132/21 - 1470 3130 229 257 257 543 573 569 ✘ -61)
6 + UMA 250D 132/21 - 1470 3130 229 257 257 543 573 569 ✘ -61)
7b + UMA 250D 160/21 - 1626 3395 229 257 266 602 635 629 ✘ -61)
7 + UMA 250D 190/21 - 1626 3545 229 266 280 653 686 680 ✘ -61)
8 + UMA 250D 190/21 - 1782 3700 229 266 280 675 711 704 ✘ -61)
9 + UMA 300D 250/22 - 1938 4010 229 304 304 826 865 851 ✘ -61)
10 + UMA 300D 250/22 - 2094 4165 229 304 304 848 891 874 ✘ -61)
11 + UMA 300D 250/22 - 2250 4325 229 304 304 870 916 898 ✘ -61)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1l + UMA 150E 13/21 27 11,0 34 (29) 26,8 80,6 0,74 4 × 2,5 3/4 × 2,5
1k + UMA 150E 15/21 32 14,0 32 (26) 31,7 81,5 0,78 4 × 4,0 3/4 × 2,5
1d + UMA 150E 18/21 38 18,5 25 (18) 42,1 81,6 0,78 4 × 4,0 3/4 × 2,5
1 + UMA 150E 22/21 41 22,0 28 (21) 49,2 83,1 0,78 4 × 4,0 3/4 × 2,5
2k + UMA 150E 30/21 64 28,0 32 (26) 63,6 84,3 0,75 4 × 6,0 3/4 × 4,0
2h + UMA 150E 30/21 68 30,0 30 (23) 66,8 84,2 0,77 4 × 6,0 3/4 × 4,0
2f + UMA 150E 37/22 73 34,0 41 (35) 76,6 83,7 0,77 3/4 × 4,062) 3/4 × 4,0
2c + UMA 150E 37/22 77 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,062) 3/4 × 4,0
2 + UMA 200D 45/21 82 44,0 28 (22) 89,0 86,0 0,84 3/4 × 6,063) 3/4 × 6,0
3h + UMA 200D 45/21 99 45,0 27 (20) 90,0 86,0 0,84 3/4 × 6,063) 3/4 × 6,0
3g + UMA 200D 55/21 105 50,0 31 (25) 101,0 87,2 0,83 3/4 × 6,063) 3/4 × 6,0
3d + UMA 200D 55/21 112 55,0 27 (20) 109,0 86,9 0,84 3/4 × 6,063) 3/4 × 6,0
3b + UMA 200D 65/21 118 62,0 30 (24) 123,0 87,7 0,83 3/4 × 10,063) 3/4 × 10,0
3 + UMA 200D 65/21 121 65,0 27 (20) 129,0 87,7 0,84 3/4 × 10,063) 3/4 × 10,0
4e + UMA 200D 75/21 146 72,0 26 (19) 146,0 87,4 0,82 3/4 × 10,063) 3/4 × 10,0
4c + UMA 200D 75/21 152 75,0 22 (15) 151,0 87,3 0,83 3/4 × 10,063) 3/4 × 10,0
3400.5/10-EN
4b + UMA 200D 90/21 158 82,0 28 (21) 167,0 88,2 0,81 3/4 × 16,063) 3/4 × 16,0
4 + UMA 200D 90/21 162 88,0 25 (18) 177,0 88,1 0,82 3/4 × 16,063) 3/4 × 16,0
5c + UMA 250D 110/21 192 100,0 25 (18) 199,0 88,6 0,82 3/4 × 25,063) 3/4 × 25,0
5b + UMA 250D 110/21 197 105,0 23 (15) 208,0 88,6 0,83 3/4 × 25,063) 3/4 × 25,0

62) Parallel cable
52 UPA 200, 200B, 250C

Water Supply
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
[m] [kW] [°C] [A] [%] [mm2] [mm2]
5 + UMA 250D 110/21 202 110,0 19 (10) 215,0 88,5 0,84 3/4 × 25,063) 3/4 × 25,0
6c + UMA 250D 132/21 230 120,0 25 (18) 229,0 89,2 0,85 3/4 × 25,063) 3/4 × 25,0
6b + UMA 250D 132/21 236 125,0 23 (14) 237,0 89,1 0,86 3/4 × 25,063) 3/4 × 25,0
6 + UMA 250D 132/21 241 132,0 19 (10) 249,0 89,0 0,86 3/4 × 25,063) 3/4 × 25,0
7b + UMA 250D 160/21 275 145,0 21 (12) 276,0 89,4 0,85 3/4 × 25,062) 3/4 × 35,0
7 + UMA 250D 190/21 286 160,0 24 (16) 317,0 90,0 0,81 3/4 × 35,062)64) 3/4 × 50,064)
8 + UMA 250D 190/21 325 180,0 18 (8) 349,0 89,8 0,83 3/4 × 35,062)64) 3/4 × 50,064)
9 + UMA 300D 250/22 373 210,0 57 (51) 389,0 90,7 0,86 2×3×70 + 1×3562)65) 2×3×70 + 1×3565)
10 + UMA 300D 250/22 413 230,0 55 (48) 424,0 90,7 0,87 2×3×70 + 1×3562)65) 2×3×70 + 1×3565)
11 + UMA 300D 250/22 453 250,0 52 (45) 458,0 90,7 0,87 2×3×70 + 1×3562)65) 2×3×70 + 1×3565)
3400.5/10-EN

UPA 200, 200B, 250C 53

Water Supply
3400.5/10-EN
54 UPA 200, 200B, 250C

Water Supply
UPA 250C - 250 / ...

Types of connection
Connection types:
– DN 150

LA* = LA - LG + LG*
different pump end:
▪ G 6:
LG* = 229 mm
Dmax* ≙ Dmax
▪ DN 150:
LG* = 179 mm
Dmax* = 285 mm (PN 10/16)
Dmax* = 300 mm (PN 25/40)
Dmax
G6
LG
LP
Optimum impeller Ø "h" Maximum

impeller Ø
LA
Operating range
Qmin = 50 m3/h
3400.5/10-EN
UPA 200, 200B, 250C 55

Water Supply

installation
Horizontal67)
G B C3
Vertical
1k + UMA 150E 18/21 790 709 1608 229 230 230 131 143 149 ✘ ✘
1f + UMA 150E 22/21 835 709 1698 229 230 230 140 152 158 ✘ ✘
1 + UMA 150E 26/21 885 709 1803 229 232 233 151 163 169 ✘ ✘
2l + UMA 150E 37/22 - 884 2158 229 233 233 193 208 211 ✘ -
2g + UMA 150E 37/22 - 884 2158 229 233 233 193 208 211 ✘ -
2d + UMA 200D 45/21 1130 884 2115 229 235 235 247 262 265 ✘ ✘
2 + UMA 200D 55/21 1185 884 2225 229 235 235 267 282 285 ✘ ✘
3h + UMA 200D 55/21 1360 1059 2400 229 235 235 288 307 308 ✘ ✘
3f + UMA 200D 65/21 1425 1059 2530 229 239 239 311 330 331 ✘ ✘
3d + UMA 200D 75/21 1470 1059 2620 229 239 239 327 346 347 ✘ ✘
3 + UMA 200D 75/21 1470 1059 2620 229 239 239 327 346 347 ✘ ✘
4g + UMA 200D 75/21 1645 1234 2795 229 239 239 352 375 374 ✘ ✘
4e + UMA 200D 90/21 - 1234 2975 229 244 244 384 407 406 ✘ -
4c + UMA 250D 110/21 1630 1234 2765 229 257 257 454 477 476 ✘ ✘
4 + UMA 250D 110/21 1630 1234 2765 229 257 257 454 477 476 ✘ ✘
5e + UMA 250D 110/21 1805 1409 2940 229 257 257 476 502 499 ✘ ✘
5c + UMA 250D 132/21 - 1409 3070 229 257 257 520 546 543 ✘ -68)
5 + UMA 250D 132/21 - 1409 3070 229 257 257 520 546 543 ✘ -68)
6d + UMA 250D 132/21 - 1584 3245 229 257 257 541 571 567 ✘ -68)
6 + UMA 250D 160/21 - 1584 3355 229 257 266 578 608 604 ✘ -68)
7c + UMA 250D 190/21 - 1759 3680 229 266 280 651 684 678 ✘ -68)
7 + UMA 250D 190/21 - 1759 3680 229 266 280 651 684 678 ✘ -68)
8c + UMA 300D 250/22 - 1934 4005 229 304 304 802 838 825 ✘ -68)
8 + UMA 300D 250/22 - 1934 4005 229 304 304 802 838 825 ✘ -68)
9 + UMA 300D 250/22 - 2109 4180 229 304 304 823 863 848 ✘ -68)
10 + UMA 300D 300/22 - 2284 4535 229 282 282 923 966 951 ✘ -68)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1k + UMA 150E 18/21 29 18,5 25 (18) 42,1 81,6 0,78 4 × 4,0 3/4 × 2,5
1f + UMA 150E 22/21 32 21,0 30 (24) 47,6 83,3 0,77 4 × 4,0 3/4 × 2,5
1 + UMA 150E 26/21 38 26,0 31 (25) 56,9 84,4 0,78 4 × 6,0 3/4 × 4,0
2l + UMA 150E 37/22 55 35,0 40 (34) 78,2 83,6 0,77 3/4 × 4,069) 3/4 × 4,0
2g + UMA 150E 37/22 60 37,0 38 (31) 81,6 83,3 0,79 3/4 × 4,0 69) 3/4 × 4,0
2d + UMA 200D 45/21 70 45,0 27 (20) 90,0 86,0 0,84 3/4 × 6,070) 3/4 × 6,0
2 + UMA 200D 55/21 75 52,0 30 (24) 104,0 87,1 0,83 3/4 × 6,070) 3/4 × 6,0
3h + UMA 200D 55/21 87 55,0 27 (20) 109,0 86,9 0,84 3/4 × 6,070) 3/4 × 6,0
3f + UMA 200D 65/21 94 62,0 30 (24) 123,0 87,7 0,83 3/4 × 10,070) 3/4 × 10,0
3d + UMA 200D 75/21 103 68,0 28 (21) 140,0 87,5 0,81 3/4 × 10,070) 3/4 × 10,0
3 + UMA 200D 75/21 109 75,0 24 (16) 151,0 87,3 0,83 3/4 × 10,070) 3/4 × 10,0
4g + UMA 200D 75/21 120 75,0 22 (15) 151,0 87,3 0,83 3/4 × 10,070) 3/4 × 10,0
4e + UMA 200D 90/21 131 86,0 27 (20) 173,0 88,1 0,82 3/4 × 16,070) 3/4 × 16,0
4c + UMA 250D 110/21 142 95,0 26 (19) 191,0 88,7 0,81 3/4 × 25,070) 3/4 × 25,0
4 + UMA 250D 110/21 147 105,0 24 (16) 208,0 88,6 0,83 3/4 × 25,070) 3/4 × 25,0
5e + UMA 250D 110/21 164 110,0 21 (12) 215,0 88,5 0,84 3/4 × 25,070) 3/4 × 25,0
5c + UMA 250D 132/21 176 120,0 25 (17) 229,0 89,2 0,85 3/4 × 25,070) 3/4 × 25,0
5 + UMA 250D 132/21 182 125,0 22 (13) 237,0 89,1 0,86 3/4 × 25,070) 3/4 × 25,0
6d + UMA 250D 132/21 204 132,0 18 (8) 249,0 89,0 0,86 3/4 × 25,070) 3/4 × 25,0
6 + UMA 250D 160/21 218 150,0 19 (9) 284,0 89,3 0,86 3/4 × 25,069) 3/4 × 35,0
3400.5/10-EN
7c + UMA 250D 190/21 248 170,0 22 (13) 333,0 89,9 0,82 3/4 × 35,069) 3/4 × 50,0
7 + UMA 250D 190/21 256 180,0 19 (9) 349,0 89,8 0,83 3/4 × 35,069)71) 3/4 × 50,071)

69) Parallel cable
56 UPA 200, 200B, 250C

Water Supply
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
[m] [kW] [°C] [A] [%] [mm2] [mm2]
8c + UMA 300D 250/22 288 195,0 58 (52) 366,0 90,6 0,85 2×3×70 + 1×3569)72) 2×3×70 + 1×3572)
8 + UMA 300D 250/22 299 210,0 57 (51) 389,0 90,7 0,86 2×3×70 + 1×3569)72) 2×3×70 + 1×3572)
9 + UMA 300D 250/22 335 235,0 54 (48) 430,0 90,7 0,87 2×3×70 + 1×3569)72) 2×3×70 + 1×3572)
10 + UMA 300D 300/22 374 260,0 56 (50) 482,0 91,2 0,86 6×1×95 + 1×9569)73) 6×1×95 + 1×9573)
Scope of supply
Depending on the model, the following items are included in
the scope of supply:
▪ Pump set with motor lead
▪ Back-up name plate
Optional:
▪ Extension cable optional: connected or supplied but not
fitted
▪ Cable connector
▪ Cable clips
▪ Pedestals
▪ Cooling shroud, suction shroud or pressure shroud
3400.5/10-EN

73) 7×1-core, round
UPA 200, 200B, 250C 57

Water Supply
Design details
UPA 300, 350
Design
▪ Single-entry
stages)
Drive
▪ Three-phase asynchronous motor
▪ Frequency 50 Hz
▪ IP68 enclosure
Main applications ▪ DOL starting or star-delta starting
▪ Water supply systems
▪ Frequency of starts
▪ Spray irrigation systems – UMA 200D, UMA 250D: 10 starts per hour
▪ Mining – UMA 300D: 5 starts per hour
▪ General irrigation systems ▪ Winding J1 (PVC) or, for higher temperatures, J2 (VPE /
XLPE)
▪ Pressure boosting
▪ Fire-fighting systems Electrical connection
▪ Lowering groundwater levels ▪ Delivered ex-factory with 1 or 2 motor leads (including
earth conductor and internal earthing)
▪ Extension cable connected with water-tight cable
Fluids handled connector
▪ Drinking water ▪ Motor lead and extension cable suitable for drinking
water use
▪ Cooling water
▪ River water, lake water and groundwater Impeller type
74)
▪ Seawater ▪ Mixed flow hydraulic system with trimmable impellers
▪ Max. permissible sand content of the fluid 50 g/m³
Bearings
Operating data ▪ Radial plain bearings
Operating properties ▪ Pump bearings lubricated by fluid handled; motor

Flow rate Q [m3/h] ≤ 840 the motor (lower end)
Q [l/s] ≤ 234 ▪ 1 or 2 intermediate bearing(s) in the pump, depending on
Head H [m] ≤ 480 the pump size and the number of stages
Fluid temperature T [°C] ≤ +50
Speed n [rpm] ≤ 2900 Connections
Well diameter D [mm] 300/350 ▪ Pump screw-ended or flanged
D [″] 12/14 ▪ With lift check valve or connection branch
3400.5/10-EN
74) Only for pumps in material variant C3 (duplex)
58 UPA 300, 350

Water Supply
Designation
Example: UPA 300 - 94 / 5 b

Designation key
Code Description
300 Minimum well diameter [mm]
94 Flow rate at best efficiency point [l/s]
5 Number of stages
b Trimmed impellers
Materials
Material selection for UPA 300 and 350 pumps
G B C3
Casing Grey cast iron (EN-GJL-200) / Bronze (CC480K-DW) / CrNiMo steel (1.4517)
nodular cast iron (JS 1030) aluminium bronze (CC333G-GS)
Impeller Bronze (CC480K-DW) CrNiMo steel (1.4517)
Screws, bolts and CrNiMo steel (A4-70) CrNiMo steel (1.4462)
nuts
Shaft Chrome steel (1.4021) CrNiMo steel (1.4462) CrNiMo steel (1.4462)
Material selection for UMA 200D, 250D, 300D motors

G C2 C3
Casing 200D Grey cast iron (EN-GJL-200) CrNiMo steel (1.4408) CrNiMo steel (1.4539)
250D Grey cast iron (EN-GJL-200) CrNiMo steel (1.4408) CrNiMo steel (1.4539)
300D Grey cast iron (EN-GJL-250) - CrNiMo steel (1.4517)
Screws, bolts 200D CrNiMo steel (A4-70) CrNiMo steel (A4-70) CrNiMo steel (1.4539)
and nuts 250D CrNiMo steel (A4-70) CrNiMo steel (A4-70) CrNiMo steel (1.4539)
300D CrNiMo steel (A4-70) - CrNiMo steel (1.4462)
Shaft 200D CrNiMo steel (1.4462) CrNiMo steel (1.4462) CrNiMo steel (1.4462)
250D CrNiMo steel (1.4462) CrNiMo steel (1.4462) CrNiMo steel (1.4462)
300D CrNiMo steel (1.4462) - CrNiMo steel (1.4462)
3400.5/10-EN
UPA 300, 350 59

Water Supply
Coating and preservation

Only for pump sets in material variant grey cast iron.
▪ 2-component high-build coating, epoxy resin base paint
– Coating structure: primer and top coat
– Film thickness: 100 to 150 µm
– Colour: ultramarine blue (RAL 5002)
Product benefits
▪ High efficiencies through optimised hydraulic design
▪ High operating reliability and a long service life by
integrated sand separator, robust wear rings and enclosed
pump bearings
▪ Durable, completely maintenance-free design with
hydrodynamic bearings
▪ Low noise level
3400.5/10-EN
60 UPA 300, 350

Water Supply
Product information Product information as per Regulation No.

1907/2006 (REACH)

curves.
Certifications
Overview
All countries Certified quality management
to ISO 9001
France French drinking water

approval
75)
3400.5/10-EN
75) Valid for pump materials G and B and motor materials G, C1, C2 and C3
UPA 300, 350 61

Water Supply
Technical data
Selection chart
n = 2900 rpm
UPA 300-65
UPA 300-94
UPA 350-128
UPA 350-180
UPA 300-65 UPA 300-94

UPA 350-128 UPA 350-180
Fig. 3: Selection chart UPA 300, 350

Selection charts or characteristic curves for UPA in material variant C3 (duplex) only on request.
3400.5/10-EN
62 UPA 300, 350

Water Supply
UPA 300 - 65 / ...

Types of connection
Connection types:
– DN 150

LA* = LA - LG + LG*
pump end:
Pump design with lift check Version with connection
valve: nozzle:
▪ G 6: ▪ G 6:
LG* = 255 mm LG* = 150 mm
Dmax* ≙ Dmax Dmax* ≙ Dmax
▪ DN 150: ▪ DN 150:
LG* = 220 mm (PN 10/16) LG* = 140 mm (PN 10/16)
LG* = 228 mm (PN 25/40) LG* = 148 mm (PN 25/40)
Dmax* = 285 mm (PN Dmax* = 285 mm (PN
10/16) 10/16)
25/40) 25/40)
Dmax
G6
LG
LP
LA
Operating range
Qmin = 50 m3/h
3400.5/10-EN
250
13,5
A 400
365
UPA 300, 350 63

Water Supply

UPA 300 - 65 A LP76) LA76) LG77) Dmax Total weight Type of
installation
connection
G B C3
Horizontal78)
With lift
nozzle
check
valve
With
Vertical
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] [kg] [kg]
1n + UMA 200D 37/21 945 735 1875 255 150 276 276 221 235 245 ✘ ✘
1m + UMA 200D 37/21 945 735 1875 255 150 276 276 221 235 245 ✘ ✘
1l + UMA 200D 37/21 945 735 1875 255 150 276 276 221 235 245 ✘ ✘
1f + UMA 200D 37/21 945 735 1875 255 150 276 276 221 235 245 ✘ ✘
1 + UMA 200D 37/21 945 735 1875 255 150 276 276 221 235 245 ✘ ✘
2m + UMA 200D 45/21 1155 900 2130 255 150 276 276 265 284 294 ✘ ✘
2l + UMA 200D 45/21 1155 900 2130 255 150 276 276 265 284 294 ✘ ✘
2g + UMA 200D 55/21 1210 900 2240 255 150 276 276 285 304 315 ✘ ✘
2d + UMA 200D 65/21 1275 900 2370 255 150 275 275 308 327 338 ✘ ✘
2 + UMA 200D 75/21 1320 900 2460 255 150 275 275 324 343 353 ✘ ✘
3k + UMA 200D 75/21 1485 1065 2625 255 150 275 275 361 387 398 ✘ ✘
3h + UMA 200D 90/21 - 1065 2805 255 150 278 278 393 419 431 ✘ -
3e + UMA 200D 90/21 - 1065 2805 255 150 278 278 393 419 431 ✘ -
3d + UMA 250D 110/21 1500 1095 2624 255 150 289 289 463 489 496 ✘ ✘
3 + UMA 250D 110/21 1500 1095 2624 255 150 289 289 463 489 496 ✘ ✘
4g + UMA 250D 110/21 1665 1260 2789 255 150 289 289 492 522 528 ✘ ✘
4e + UMA 250D 132/21 1730 1260 2919 255 150 289 289 536 566 572 ✘ ✘
4b + UMA 250D 132/21 1730 1260 2919 255 150 289 289 536 566 572 ✘ ✘
4 + UMA 250D 160/21 - 1260 3029 255 150 289 289 573 603 609 ✘ -79)
5e + UMA 250D 160/21 - 1425 3194 255 150 289 289 603 637 645 ✘ -79)
5b + UMA 250D 190/21 - 1425 3344 255 150 298 311 654 688 696 ✘ -79)
5 + UMA 300D 250/22 - 1425 3498 255 150 325 325 779 813 819 ✘ -79)
6e + UMA 250D 190/21 - 1590 3509 255 150 298 311 682 721 728 ✘ -79)
6b + UMA 300D 250/22 - 1590 3663 255 150 325 325 807 846 851 ✘ -79)
6 + UMA 300D 250/22 - 1590 3663 255 150 325 325 807 846 851 ✘ -79)
7 + UMA 300D 300/22 - 1755 4008 255 150 304 304 913 957 964 ✘ -79)
8 + UMA 300D 300/22 - 1920 4173 255 150 304 304 942 990 997 ✘ -79)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1n + UMA 200D 37/21 30 16,0 44 (42) 43,5 83,0 0,64 3/4 × 6,080) 3/4 × 6,0
1m + UMA 200D 37/21 35 20,0 43 (40) 48,5 84,6 0,71 3/4 × 6,080) 3/4 × 6,0
1l + UMA 200D 37/21 39 23,0 41 (38) 53,0 85,2 0,75 3/4 × 6,080) 3/4 × 6,0
1f + UMA 200D 37/21 42 27,0 38 (34) 59,0 85,5 0,79 3/4 × 6,080) 3/4 × 6,0
1 + UMA 200D 37/21 48 34,0 32 (26) 70,0 85,4 0,83 3/4 × 6,080) 3/4 × 6,0
2m + UMA 200D 45/21 71 40,0 32 (27) 82,0 86,2 0,82 3/4 × 6,080) 3/4 × 6,0
2l + UMA 200D 45/21 77 45,0 28 (21) 90,0 86,0 0,84 3/4 × 6,080) 3/4 × 6,0
2g + UMA 200D 55/21 83 54,0 29 (23) 108,0 87,0 0,84 3/4 × 6,080) 3/4 × 6,0
2d + UMA 200D 65/21 91 60,0 30 (25) 120,0 87,8 0,83 3/4 × 10,080) 3/4 × 10,0
2 + UMA 200D 75/21 98 70,0 27 (20) 143,0 87,4 0,81 3/4 × 10,080) 3/4 × 10,0
3k + UMA 200D 75/21 118 72,0 25 (18) 146,0 87,4 0,82 3/4 × 10,080) 3/4 × 10,0
3h + UMA 200D 90/21 124 82,0 28 (22) 167,0 88,2 0,81 3/4 × 16,080) 3/4 × 16,0
3e + UMA 200D 90/21 130 88,0 26 (18) 177,0 88,1 0,82 3/4 × 16,080) 3/4 × 16,0
3d + UMA 250D 110/21 137 95,0 26 (19) 191,0 88,7 0,81 3/4 × 25,080) 3/4 × 25,0
3 + UMA 250D 110/21 147 110,0 20 (11) 215,0 88,5 0,84 3/4 × 25,080) 3/4 × 25,0
4g + UMA 250D 110/21 167 110,0 19 (10) 215,0 88,5 0,84 3/4 × 25,080) 3/4 × 25,0
4e + UMA 250D 132/21 174 120,0 25 (17) 229,0 89,2 0,85 3/4 × 25,080) 3/4 × 25,0
3400.5/10-EN
4b + UMA 250D 132/21 186 130,0 20 (10) 245,0 89,1 0,86 3/4 × 25,080) 3/4 × 25,0
4 + UMA 250D 160/21 196 145,0 21 (12) 276,0 89,4 0,85 3/4 × 25,081) 3/4 × 35,082)
5e + UMA 250D 160/21 217 145,0 20 (11) 276,0 89,4 0,85 3/4 × 25,081) 3/4 × 35,082)
76) UPA 300 - 65 in C3 material variant: Subtract 5 mm.

81) Parallel cable
82) 1×3-core, flat and 1×4-core, round
64 UPA 300, 350

Water Supply
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)
[m] [kW] [°C] [A] [%] [mm2] [mm2]
5b + UMA 250D 190/21 235 165,0 22 (13) 325,0 90,0 0,82 3/4 × 35,082) 3/4 × 50,082)
5 + UMA 300D 250/22 252 190,0 59 (53) 359,0 90,5 0,85 2×3×70 + 1×3581)83) 2×3×70 + 1×3583)
6e + UMA 250D 190/21 261 180,0 19 (9) 349,0 89,8 0,83 3/4 × 35,081)82) 3/4 × 50,082)
6b + UMA 300D 250/22 287 205,0 57 (51) 382,0 90,6 0,86 2×3×70 + 1×3581)83) 2×3×70 + 1×3583)
6 + UMA 300D 250/22 300 225,0 55 (49) 414,0 90,7 0,87 2×3×70 + 1×3581)83) 2×3×70 + 1×3583)
7 + UMA 300D 300/22 351 265,0 56 (49) 491,0 91,2 0,86 6×1×95 + 1×9581)84) 6×1×95 + 1×9584)
8 + UMA 300D 300/22 399 300,0 53 (46) 546,0 91,2 0,87 6×1×95 + 1×9581)84) 6×1×95 + 1×9584)
3400.5/10-EN

UPA 300, 350 65

Water Supply
3400.5/10-EN
66 UPA 300, 350

Water Supply
UPA 300 - 94 / ...

Types of connection
Connection types:
– DN 200

LA* = LA - LG + LG*
pump end:
valve: nozzle:
▪ G 8: ▪ G 8:
LG* = 290 mm LG* = 200 mm
▪ DN 200: ▪ DN 200:
LG* = 240 mm (PN 10/16) LG* = 134 mm (PN 10/16)
LG* = 244 mm (PN 25) LG* = 138 mm (PN 25)
10/16) 10/16)
Dmax* = 360 mm (PN 25) Dmax* = 360 mm (PN 25)
Dmax
LG G8
LP
LA
Operating range
Qmin = 70 m3/h
3400.5/10-EN
250
13,5
A 425
365
UPA 300, 350 67

Water Supply

installation
connection
G B C3
Horizontal86)
With lift
nozzle
check
valve
With
Vertical
1n + UMA 200D 37/21 960 775 1915 290 200 286 286 235 252 276 ✘ ✘
1m + UMA 200D 37/21 960 775 1915 290 200 286 286 235 252 276 ✘ ✘
1k + UMA 200D 37/21 960 775 1915 290 200 286 286 235 252 276 ✘ ✘
1g + UMA 200D 45/21 1005 775 2005 290 200 286 286 251 268 292 ✘ ✘
1d + UMA 200D 45/21 1005 775 2005 290 200 286 286 251 268 292 ✘ ✘
1 + UMA 200D 55/21 1060 775 2115 290 200 286 286 271 288 312 ✘ ✘
2m + UMA 200D 65/21 1300 950 2420 290 200 285 285 335 359 372 ✘ ✘
2k + UMA 200D 75/21 1345 950 2510 290 200 285 285 351 375 388 ✘ ✘
2h + UMA 200D 90/21 - 950 2690 290 200 288 288 383 407 420 ✘ -
2d + UMA 250D 110/21 1360 980 2509 290 200 299 299 453 477 498 ✘ ✘
2 + UMA 250D 110/21 1360 980 2509 290 200 299 299 453 477 498 ✘ ✘
3k + UMA 250D 110/21 1535 1155 2684 290 200 299 299 484 514 535 ✘ ✘
3h + UMA 250D 132/21 1600 1155 2814 290 200 299 299 528 558 579 ✘ ✘
3e + UMA 250D 132/21 1600 1155 2814 290 200 299 299 528 558 579 ✘ ✘
3c + UMA 250D 160/21 1655 1155 2924 290 200 299 308 565 595 616 ✘ ✘
3 + UMA 250D 190/21 - 1155 3074 290 200 308 321 616 646 667 ✘ -87)
4f + UMA 250D 190/21 - 1330 3249 290 200 308 321 650 684 703 ✘ -87)
4c + UMA 300D 250/22 - 1330 3403 290 200 331 331 775 809 829 ✘ -87)
4 + UMA 300D 250/22 - 1330 3403 290 200 331 331 775 809 829 ✘ -87)
5 + UMA 300D 300/22 - 1505 3758 290 200 311 311 886 925 946 ✘ -87)
6 + UMA 300D 400/22 - 1680 4053 290 200 311 311 970 1014 1032 ✘ -87)
7e + UMA 300D 400/22 - 1855 4228 290 200 311 311 1001 1051 1069 ✘ -87)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1n + UMA 200D 37/21 34 29,0 37 (32) 62,0 85,6 0,80 3/4 × 6,088) 3/4 × 6,0
1m + UMA 200D 37/21 38 32,0 34 (29) 67,0 85,5 0,82 3/4 × 6,088) 3/4 × 6,0
1k + UMA 200D 37/21 43 36,0 30 (25) 73,0 85,3 0,84 3/4 × 6,088) 3/4 × 6,0
1g + UMA 200D 45/21 47 42,0 31 (25) 85,0 86,1 0,83 3/4 × 6,088) 3/4 × 6,0
1d + UMA 200D 45/21 51 45,0 27 (20) 90,0 86,0 0,84 3/4 × 6,088) 3/4 × 6,0
1 + UMA 200D 55/21 54 54,0 29 (23) 108,0 87,0 0,84 3/4 × 6,088) 3/4 × 6,0
2m + UMA 200D 65/21 78 62,0 29 (23) 123,0 87,7 0,83 3/4 × 10,088) 3/4 × 10,0
2k + UMA 200D 75/21 90 74,0 25 (18) 149,0 87,3 0,83 3/4 × 10,088) 3/4 × 10,0
2h + UMA 200D 90/21 96 82,0 28 (22) 167,0 88,2 0,81 3/4 × 16,088) 3/4 × 16,0
2d + UMA 250D 110/21 105 95,0 26 (19) 191,0 88,7 0,81 3/4 × 25,088) 3/4 × 25,0
2 + UMA 250D 110/21 112 110,0 20 (10) 215,0 88,5 0,84 3/4 × 25,088) 3/4 × 25,0
3k + UMA 250D 110/21 138 110,0 20 (10) 215,0 88,5 0,84 3/4 × 25,088) 3/4 × 25,0
3h + UMA 250D 132/21 146 125,0 24 (15) 237,0 89,1 0,86 3/4 × 25,088) 3/4 × 25,0
3e + UMA 250D 132/21 155 130,0 20 (11) 245,0 89,1 0,86 3/4 × 25,088) 3/4 × 25,0
3c + UMA 250D 160/21 162 145,0 20 (11) 276,0 89,4 0,85 3/4 × 25,089) 3/4 × 35,0
3 + UMA 250D 190/21 172 165,0 22 (14) 325,0 90,0 0,82 3/4 × 35,089)90) 3/4 × 50,090)
4f + UMA 250D 190/21 204 175,0 19 (10) 341,0 89,9 0,83 3/4 × 35,089)90) 3/4 × 50,090)
4c + UMA 300D 250/22 222 205,0 57 (52) 382,0 90,6 0,86 2×3×70 + 1×3589)91) 2×3×70 + 1×3591)
4 + UMA 300D 250/22 232 225,0 55 (49) 414,0 90,7 0,87 2×3×70 + 1×3589)91) 2×3×70 + 1×3591)
5 + UMA 300D 300/22 290 280,0 54 (48) 516,0 91,2 0,86 6×1×95 + 1×9589)92) 6×1×95 + 1×9592)
6 + UMA 300D 400/22 348 335,0 52 (45) 619,0 91,4 0,86 6×1×95 + 1×9589)92) 6×1×95 + 1×9592)
7e + UMA 300D 400/22 371 315,0 54 (47) 586,0 91,4 0,85 6×1×95 + 1×9589)92) 6×1×95 + 1×9592)
3400.5/10-EN

89) Parallel cable
68 UPA 300, 350

Water Supply
3400.5/10-EN
UPA 300, 350 69

Water Supply
UPA 350 - 128 / ...

Types of connection
Connection types:
– DN 200

LA* = LA - LG + LG*
pump end:
valve: nozzle:
▪ G 8: ▪ G 8:
LG* = 328 mm LG* = 169 mm
▪ DN 200: ▪ DN 200:
LG* = 278 mm (PN 10/16) LG* = 123 mm (PN 10/16)
10/16) 10/16)
Dmax
G8
LG
LP
LA
Operating range
Qmin = 100 m3/h
250
250
3400.5/10-EN
13,5 13,5
A 485
365 445
70 UPA 300, 350

Water Supply

installation
connection
G B C3
Horizontal94)
With lift
nozzle
check
valve
With
Vertical
1l + UMA 200D 37/21 1020 898 2038 328 169 322 322 274 298 315 ✘ ✘
1k + UMA 200D 45/21 1065 898 2128 328 169 322 322 290 314 331 ✘ ✘
1h + UMA 200D 55/21 1120 898 2238 328 169 322 322 310 334 351 ✘ ✘
1f + UMA 200D 65/21 1185 898 2368 328 169 320 320 333 357 374 ✘ ✘
1d + UMA 200D 75/21 1230 898 2458 328 169 320 320 349 373 390 ✘ ✘
1b + UMA 200D 90/21 - 898 2638 328 169 324 324 381 405 422 ✘ -
1 + UMA 250D 110/21 1215 898 2427 328 169 334 334 451 475 493 ✘ ✘
2h + UMA 250D 110/21 1415 1098 2627 328 169 334 334 497 532 542 ✘ ✘
2g + UMA 250D 132/21 1480 1098 2757 328 169 334 334 541 576 586 ✘ ✘
2e + UMA 250D 132/21 1480 1098 2757 328 169 334 334 541 576 586 ✘ ✘
2d + UMA 250D 160/21 1535 1098 2867 328 169 334 343 578 613 623 ✘ ✘
2b + UMA 250D 190/21 - 1098 3017 328 169 343 357 629 664 674 ✘ -95)
2 + UMA 300D 250/22 - 1108 3181 328 169 360 360 754 789 800 ✘ -95)
3c + UMA 300D 250/22 - 1308 3381 328 169 360 360 799 839 849 ✘ -95)
3 + UMA 300D 300/22 - 1308 3561 328 169 341 341 877 917 929 ✘ -95)
4b + UMA 300D 400/22 - 1508 3881 328 169 341 341 972 1019 1029 ✘ -95)
4 + UMA 300D 400/22 - 1508 3881 328 169 341 341 972 1019 1029 ✘ -95)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1l + UMA 200D 37/21 40 35,0 31 (25) 72,0 85,3 0,83 3/4 × 6,096) 3/4 × 6,0
1k + UMA 200D 45/21 45 44,0 28 (22) 89,0 86,0 0,84 3/4 × 6,096) 3/4 × 6,0
1h + UMA 200D 55/21 52 55,0 27 (20) 109,0 86,9 0,84 3/4 × 6,096) 3/4 × 6,0
1f + UMA 200D 65/21 57 64,0 28 (22) 127,0 87,7 0,84 3/4 × 10,096) 3/4 × 10,0
1d + UMA 200D 75/21 63 75,0 23 (15) 151,0 87,3 0,83 3/4 × 10,096) 3/4 × 10,0
1b + UMA 200D 90/21 69 88,0 25 (18) 177,0 88,1 0,82 3/4 × 16,096) 3/4 × 16,0
1 + UMA 250D 110/21 75 105,0 22 (14) 208,0 88,6 0,83 3/4 × 25,096) 3/4 × 25,0
2h + UMA 250D 110/21 104 110,0 19 (10) 215,0 88,5 0,84 3/4 × 25,096) 3/4 × 25,0
2g + UMA 250D 132/21 109 120,0 24 (16) 229,0 89,2 0,85 3/4 × 25,096) 3/4 × 25,0
2e + UMA 250D 132/21 117 132,0 18 (9) 249,0 89,0 0,86 3/4 × 25,096) 3/4 × 25,0
2d + UMA 250D 160/21 126 150,0 18 (9) 284,0 89,3 0,86 3/4 × 25,097) 3/4 × 35,098)
2b + UMA 250D 190/21 138 175,0 19 (10) 341,0 89,9 0,83 3/4 × 35,097)98) 3/4 × 50,098)
2 + UMA 300D 250/22 153 210,0 57 (51) 389,0 90,7 0,86 2×3×70 + 1×3597)99) 2×3×70 + 1×3599)
3c + UMA 300D 250/22 196 240,0 54 (47) 439,0 90,7 0,87 2×3×70 + 1×3597)99) 2×3×70 + 1×3599)
3 + UMA 300D 300/22 228 300,0 52 (45) 546,0 91,2 0,87 6×1×95 + 1×9597)100) 6×1×95 + 1×95100)
4b + UMA 300D 400/22 280 355,0 50 (42) 652,0 91,4 0,86 6×1×95 + 1×9597)100) 6×1×95 + 1×95100)
4 + UMA 300D 400/22 302 400,0 45 (35) 728,0 91,2 0,87 6×1×95 + 1×9597)100) 6×1×95 + 1×95100)
3400.5/10-EN

97) Parallel cable
UPA 300, 350 71

Water Supply
UPA 350 - 180 / ...

Types of connection
Connection types:
– DN 200

LA* = LA - LG + LG*
pump end:
valve: nozzle:
▪ G 8: ▪ G 8:
LG* = 328 mm LG* = 169 mm
▪ DN 200: ▪ DN 200:
LG* = 278 mm (PN 10/16) LG* = 123 mm (PN 10/16)
10/16) 10/16)
Dmax
G8
LG
G8 / DN 200
DN 250
LP
LA
Operating range
Qmin = 120 m3/h
250
250
3400.5/10-EN
13,5 13,5
A 480
365 440
72 UPA 300, 350

Water Supply

installation
connection
G B C3
Horizontal102)
With lift
nozzle
check
valve
With
Vertical
1m + UMA 200D 55/21 1120 898 2238 328 169 322 322 317 342 351 ✘ ✘
1l + UMA 200D 65/21 1185 898 2368 328 169 320 320 340 365 374 ✘ ✘
1h + UMA 200D 65/21 1185 898 2368 328 169 320 320 340 365 374 ✘ ✘
1e + UMA 200D 75/21 1230 898 2458 328 169 320 320 356 381 390 ✘ ✘
1c + UMA 200D 90/21 - 898 2638 328 169 324 324 388 413 422 ✘ -
1 + UMA 250D 110/21 1215 898 2427 328 169 334 334 458 483 493 ✘ ✘
2k + UMA 250D 132/21 1480 1098 2757 328 169 334 334 546 578 587 ✘ ✘
2g + UMA 250D 132/21 1480 1098 2757 328 169 334 334 546 578 587 ✘ ✘
2f + UMA 250D 160/21 1535 1098 2867 328 169 334 343 583 615 624 ✘ ✘
2d + UMA 250D 190/21 - 1098 3017 328 169 343 357 634 666 675 ✘ -103)
2b + UMA 250D 190/21 - 1098 3017 328 169 343 357 634 666 675 ✘ -103)
2 + UMA 300D 250/22 - 1108 3181 328 169 360 360 759 791 798 ✘ -103)
3e + UMA 300D 250/22 - 1308 3381 328 169 360 360 801 840 846 ✘ -103)
3 + UMA 300D 400/22 - 1308 3681 328 169 341 341 931 970 976 ✘ -103)
4f + UMA 300D 400/22 - 1508 3881 328 169 341 341 974 1021 1025 ✘ -103)
4d + UMA 300D 400/22 - 1508 3881 328 169 341 341 974 1021 1025 ✘ -103)
Technical data
v ≥ 0,2 m/s (0,0

Rated current
Rated power
Power factor
temperature
Q = 0 m3/h
Max. fluid
Efficiency
Head
m/s)

[m] [kW] [°C] [A] [%] [mm2] [mm2]
1m + UMA 200D 55/21 41 54,0 29 (23) 108,0 87,0 0,84 3/4 × 6,0104) 3/4 × 6,0
1l + UMA 200D 65/21 45 62,0 30 (24) 123,0 87,7 0,83 3/4 × 10,0104) 3/4 × 10,0
1h + UMA 200D 65/21 49 65,0 28 (21) 129,0 87,7 0,84 3/4 × 10,0104) 3/4 × 10,0
1e + UMA 200D 75/21 55 75,0 24 (16) 151,0 87,3 0,83 3/4 × 10,0104) 3/4 × 10,0
1c + UMA 200D 90/21 62 86,0 27 (20) 173,0 88,1 0,82 3/4 × 16,0104) 3/4 × 16,0
1 + UMA 250D 110/21 66 100,0 25 (17) 199,0 88,6 0,82 3/4 × 25,0104) 3/4 × 25,0
2k + UMA 250D 132/21 95 130,0 22 (13) 245,0 89,1 0,86 3/4 × 25,0104) 3/4 × 25,0
2g + UMA 250D 132/21 100 132,0 18 (9) 249,0 89,0 0,86 3/4 × 25,0104) 3/4 × 25,0
2f + UMA 250D 160/21 111 150,0 20 (11) 284,0 89,3 0,86 3/4 × 25,0105) 3/4 × 35,0106)
2d + UMA 250D 190/21 121 165,0 22 (14) 325,0 90,0 0,82 3/4 × 35,0105)106) 3/4 × 50,0106)
2b + UMA 250D 190/21 128 180,0 18 (9) 349,0 89,8 0,83 3/4 × 35,0105)106) 3/4 × 50,0106)
2 + UMA 300D 250/22 137 210,0 57 (51) 389,0 90,7 0,86 2×3×70 + 1×35105)107) 2×3×70 + 1×35107)
3e + UMA 300D 250/22 173 240,0 53 (47) 439,0 90,7 0,87 2×3×70 + 1×35105)107) 2×3×70 + 1×35107)
3 + UMA 300D 400/22 205 320,0 54 (47) 595,0 91,4 0,85 6×1×95 + 1×95105)108) 6×1×95 + 1×95108)
4f + UMA 300D 400/22 226 310,0 54 (47) 580,0 91,4 0,85 6×1×95 + 1×95105)108) 6×1×95 + 1×95108)
4d + UMA 300D 400/22 245 345,0 51 (44) 634,0 91,4 0,86 6×1×95 + 1×95105)108) 6×1×95 + 1×95108)
3400.5/10-EN

105) Parallel cable
UPA 300, 350 73

Water Supply
Scope of supply
Depending on the model, the following items are included in
the scope of supply:
▪ Pump set with motor lead
▪ Back-up name plate
Optional:
▪ Extension cable optional: connected or supplied but not
fitted
▪ Cable connector
▪ Cable clips
▪ Pedestals
▪ Cooling shroud, suction shroud or pressure shroud
3400.5/10-EN
74 UPA 300, 350

Water Supply
Accessories for sizes UPA 200 to UPA 350

Installation parts
Selection table
Description Mat. No. Weight
[kg]
Set of pedestals for horizontal installation, comprising: 2 pedestals and fastening elements
Galvanised steel (S235 JRG2+Z) UPA 200 with UMA 150E motor 90017255 2,5
UPA 200 with UMA 200D motor 01046640 2,5
CrNi steel (1.4301) UPA 200B with UMA 150E motor 01061866 2,5
UPA 200B with UMA 200D motor 01061867 2,5
UPA 250C with UMA 150E motor 01061868 2,5
UPA 250C with UMA 200D motor 01061869 2,5
UPA 250C with UMA 250D motor 01061870 2,5
Galvanised steel (S235 JRG2+Z) UPA 300-65 with UMA 200D motor 01046644 7,8
UPA 300-94 with UMA 200D motor 01046645 7,8
Bolts for fastening the pedestals to the foundation are not included in the scope of supply; they must be provided at
the site.
Pedestals for pump sets in material variant C3 (duplex) on request.

Centring device for UMA 150E and UMA 200D, for use in wells of up to DN 350
Plastic (PE) Up to DN 250 90047662 -
Up to DN 300 90047663 -
Up to DN 350 90047664 -
Cooling, suction and pressure shroud On request
Material: CrNiMo steel or galvanised steel
Adapter from screwed end to flange, PN 10/40, with 2 recesses in the flange, offset by 90°
G 3 to DN 80, CrNiMo steel H = 180 mm, D = 200 mm 95000233 5,6
Pair of supporting and installation clamps for the following riser sizes, incl. fastening elements, material: painted steel
R 3 / DN 80 L = 600 mm, F = 17,5 kN 95000298 12
R 4 / DN 100 L = 700 mm, F = 24,5 kN 95000300 21
R 5 / DN 125 L = 800 mm, F = 31,0 kN 95000302 29
R 6 / DN 150 L = 800 mm, F = 31,0 kN 95000304 29
R 8 / DN 200 L = 900 mm, F = 108 kN 95000307 70
2 pairs are required for installation and dismantling.
Motor accessories
Fill check kit, for checking and topping up the motor fill after prolonged 90066762 0,25
storage for UMA 150D, UMA 150E, UMA 200D, UMA 250D
Electrical accessories
Selection table
3400.5/10-EN

[kg]
Extension cable,
blue, rubber-sheathed cable for drinking water applications, maximum ambient temperatures +50 °C
G RD GWT - J, 4-core, round, with earth conductor 4 x 1,5 mm² 90068174 0,18
Values indicated per meter 4 x 2,5 mm² 90068175 0,259
4 x 4 mm² 90068176 0,356
4 x 6 mm² 90068177 0,475
4 x 10 mm² 90068178 0,837
4 x 16 mm² 90068179 1,22
Accessories for sizes UPA 200 to UPA 350 75

Water Supply

[kg]
G RD GWT - J, 4-core, round, with earth conductor 4 x 25 mm² 90068180 1,77
Values indicated per meter 4 x 35 mm² 90068181 2,304
4 x 50 mm² 90068182 3,185
4 x 70 mm² 90068183 4,364
G FL GWT - O, 3-core, flat, without earth conductor 3 x 1.5 mm² 90068148 0,11
Values indicated per meter 3 x 2.5 mm² 90068149 0,171
3 x 4 mm² 90068150 0,252
3 x 6 mm² 90068151 0,319
3 x 10 mm² 90068152 0,486
3 x 16 mm² 90068153 0,75
3 x 25 mm² 90068154 1,107
3 x 35 mm² 90068155 1,438
3 x 50 mm² 90068156 2,054
3 x 70 mm² 90068157 2,76
Shielded Hydrofirm (T) cable
S07BC4B - F 3 x 6 / 6 KON 01101358 -
S07BC4B - F 3 x 16 / 16 KON 01101360 -
S07BC4B - F 3 x 35 + 3G16 / 3 01101361 -
Cable connector, non-separable, including sealing compound, for connecting 1 extension cable to 1 or 2 motor leads
Size 28 for connection to:
1 motor lead Supplied but not fitted 95005106 0,5
Connected and sealed at the factory 90049385 0,5
2 motor leads Supplied but not fitted 90049400 0,8
Sizes 53 and 78 for connection On request
Cable clip for fastening the cable to the riser
Size 1 (rubber strap / plastic studs), 01088095 0,04
for up to 1 cable, flat, 3 x 6 mm2 or 4 x 6 mm2 and 1 cable, round, 4 x 6 mm2
Sizes 2 - 11 (metal strap / screw band with tension screw / rubber cable protector), On request -
for larger cross-sections up to 70 mm2
Cable clips for pump sets in material variant B (special), C3 (duplex) on request.
Use 1 cable clip each per cable and per 3 m of riser pipe.
Dry running protection equipment (supply voltage 220 V / 240 V) for
Semi-automatic operation (1 relay, 1 pushbutton + 2 electrodes) 90009553 2
Fully automatic operation (1 relay + 3 electrodes) 90009554 2
Plus 1 control current line, blue, 1 x 1.5 mm2 for each electrode; values indicated per metre 01096713 0,1
Pressure controller, insulating enclosure (membrane type), 1 to 8 bar, with pressure connection G 3/8 01151586 1
Pt100 temperature monitoring equipment for use in submersible motors to protect the windings from overheating. Comprises:
Pt100 temperature sensor with 10 m cable UMA 150E material variant C1, C2 01532593 1,1
4 x 0.5 mm2 for motor_ UMA 150E material variant C3 01532594 1,1
UMA 200D, UMA 250D material variant G, C2 90063006 1,1
UMA 200D, UMA 250D material variant C3 On request -
Display / switchgear (supply voltage V = 110/220 V) 90064446 0,32
Control cable, blue, round 4 x 0.5 mm2 Per metre 01049403 0,08
3400.5/10-EN
Immersion electrodes
Set of electrodes: 3 electrodes made of stainless 40980055 0,3
steel
Set of electrodes: 1 electrode made of stainless 40980056 0,1
steel
76 Accessories for sizes UPA 200 to UPA 350

Water Supply
Related Documents
Related Documents
List of components
List of UPA 150C components
914.01
145 545
752
756
108.05
759
412
316
751
905 922
52 - 4
230
58 - 1 503
108.02
210
825
108.01
849
502
108.01
550
143
106
914.02
81 - 39
920 914.03
3400.5/10-EN
List of components 77
Water Supply
Related Documents
Quantity Part No. Description Scope of supply Recommended in

addition:
1 per stage 52-4 Locking sleeve - -
1 58-1 Protecting plug - -
Depending on the length of the 81-39 Cable clip - 914.02
pump and the number of cable
guards
1 106 Suction casing - -
1 per stage 108.01 Stage casing 502, 545 -
1 per stage 108.02 Stage casing with drilled holes 502, 545 -
1 108.05 Upper stage casing 752, 545 316
1 143 Suction strainer - 914.03
1 145 Adapter - 412, 914.01
1 210 Shaft 849 -
1 per stage 230 Impeller 503 52-4, 922
1 per stage 230 109) Impeller, complete set 503, 52-4, 922 -
1 316 Bearing 110) - 108.05
1 412 O-ring 110) - 914.01
1 per stage 502 Casing wear ring 110) - 503
1 per stage 503 Impeller wear ring 110) - 502
110)
1 per stage 545 Bearing bush - -
1 550 Disc - 502
1 751 Valve body - 412
1 752 Valve seat - -
1 756 Valve spring - -
1 759 Valve disc - -
1 759 Valve disc, complete set 110) 412, 752, 756, 914.01 -
1 per cable 825 Cable guard - 81-39, 914.02, 914.03
4 905 Metal strap - 920
8 914.01 Hexagon socket head cap screw 110) - -
2 x depending on the length of 914.02 Hexagon socket head cap screw M5 - -
the pump and the number of ×8
cable guards
1 914.03 Hexagon socket head cap screw M5 - -
× 25
4 920 Nut - -
1 per stage 922 109) Impeller nut - -
3400.5/10-EN
109) Special tool required for assembly

110) Recommended spare parts
78 List of components
Water Supply
Related Documents
List of UPA 200 components
List of UPA 200 components, material variant G
751
901.11
916.11 920.02
751 900.01
81-73
920.01 171.02
900.21
108.02
550.01
81-39.21
756
752.12
759 Diffuser fastening for UPA 200-14
752.11
917
545
58-1
932.01
900.01
529
171.01 521
550.02 932.02
108.01
81-39.22 550.02
540.01
825
108.02
520.01
Axial thrust balancing for pumps with ≥ 11 stages
171.02
940.01
232
412
503
211
502
106
211
525.01
525.01
106
940.02 525.02
904.01
849
143
849
900.02
904.01
904.02
901.01
920.03
3400.5/10-EN
UPA 200 with connection to a UMA 200D motor UPA 200 with connection to a UMA 150E motor
Water Supply
Related Documents
List of UPA 200 components, material variant G
Quantity Part No. Description Scope of supply Additionally

recommended:
1 58-1 Protecting plug111) - -
1 per cable 81-39.21 Clamp - 900.21
1 per cable 81-39.22 Disc - -
1 per cable 81-73 Cable support - -
1 106 Suction casing Incl. 502 143, 412, 900.02
1 108.01 Stage casing (last stage)111) Incl. 171.01, 545, 900.01 or 412, 58-1
900.01+920.02
Number of stages -1 108.02 Stage casing Incl. 171.02, 540.01, 900.01 412
or 900.01+920.02
1 143 Suction strainer111) - 900.02
1 171.01 Diffuser (last stage) Incl. 108.01 -
Number of stages -1 171.02 Diffuser - 900.01 or
900.01+920.02
1 211 Pump shaft - 550.02, 932.01/.02,
940.01/.02
Number of stages 232 Clockwise impeller (radial) Incl. 503 -
Number of stages +1 412 O-ring111) - -
1 502112) Casing wear ring111) - -
111)
Number of stages 503 Impeller wear ring - -
Number of stages -1 520.01 Sleeve111) - -
1 521113) Stage sleeve111) - 550.02, 932.02
1 525.01 Spacer sleeve - 550.02, 932.01
1 525.02 Spacer sleeve - -
1 529 Bearing sleeve - 545, 550.02, 932.01
Number of stages -1 540.01 Bush111) - -
1 545 Bearing bush - 529, 58-1
4 550.01 Disc111) - -
10 550.02113) Disc - -
1 751 Valve body Incl. 752.11/.12, 756, 759, -
901.11, 916.11
1 752.11 Valve seat - 752.12
1 752.12 Valve seat (rubber) - -
1 per cable 825 Cable guard - 81-39.21/.22, 81-73,
900.21
1 849 Sleeve coupling - 904.01, 904.02, 940.02
Number of stages x 3 900.01 Bolt/screw - -
2 900.02 Bolt/screw111) - -
2 900.21 Bolt/screw - -
4 901.01 Hexagon head bolt - -
1 904.01 Grub screw111) - -
114)
1 904.02 Grub screw111) - -
1 916.11 Plug - -
4 917 Metal strap - 550.01, 920.01
4 920.01 Nut - -
Number of stages x 3 920.02115) Nut (diffuser) - -
4 920.03 Nut - -
3400.5/10-EN
1 932.01 Circlip111) - -

112) Only for UPA 200-11
113) Only for pump sets with axial thrust balancing
114) Only for UMA 200D
Water Supply
Related Documents

recommended:
1 932.02113) Circlip111) - -
Number of stages 940.01 Key111) - -
1 940.02114) Key111) - -
3400.5/10-EN
Water Supply
Related Documents
List of UPA 200 components, material variant B
751
901.11
916.11 920.02
751
900.01
81-73
920.01 171.02
900.21
550.01 108.02
81-39.21
756
752.12
759
Diffuser fastening for UPA 200-14
752.11
917
545.01
58-1
901.01
900.01
550.02
171.01 521
529.01 501
108.01
81-39.22 550.03
540.01
550.03
108.02
825 Axial thrust balancing for pumps with ≥ 11 stages
171.02
520.01
232
940.01
503
412
502 211
211 525.01
525.01
106 106
940.02 525.02
849
904.01 849
143 904.01
900.02
904.02
901.02
920.03
3400.5/10-EN
UPA 200 with connection to a UMA 200D motor UPA 200 with connection to a UMA 150E motor
Water Supply
Related Documents
List of UPA 200 components, material variant B

recommended:
1 58-1 Protecting plug116) - -
1 per cable 81-39.21 Clamp - 900.21
1 per cable 81-39.22 Disc - 900.21
1 per cable 81-73 Cable support - -
1 106 Suction casing Incl. 502 143, 412, 900.02
1 108.01 Stage casing (last stage)116) Incl. 171.01, 545.01, 900.01 412, 58-1
or 900.01+920.02
Number of stages -1 108.02 Stage casing Incl. 171.02, 540.01, 900.01 412
or 900.01+920.02
1 143 Suction strainer116) - 900.02
1 171.01 Diffuser (last stage) Incl. 108.01 -
Number of stages -1 171.02 Diffuser - 540.01, 900.01 or
900.01+920.02
1 211 Pump shaft - 501, 550.03, 940.01/.02
Number of stages 232 Clockwise impeller (radial) Incl. 503 -
Number of stages +1 412 O-ring116) - -
117)
1 501 Segmental ring116) - 550.03
118) 116)
1 502 Casing wear ring - -
116)
Number of stages 503 Impeller wear ring - -
Number of stages -1 520.01 Sleeve116) - -
1 521117) Stage sleeve116) - 501, 550.03
1 529.01 Bearing sleeve116) - 545.01, 550.03
Number of stages -1 540.01 Bush116) - -
1 545.01 Bearing bush - 529.01, 58-1
4 550.01 Disc - -
1 550.02 Disc - -
10 550.03117) Disc116) - -
1 751 Valve body Incl. 752.11/.12, 756, 759, -
901.11, 916.11
1 752.11 Valve seat - 752.12
1 per cable 825 Cable guard - 81-39.21/.22, 81-73,
900.21
1 849 Sleeve coupling - 904.01, 904.02, 940.02
Number of stages x 3 900.01 Bolt/screw - -
2 900.02 Bolt/screw116) - -
2 900.21 Bolt/screw - -
116)
1 901.01 Hexagon head bolt -
1 904.01 Grub screw116) - -
119)
1 904.02 Grub screw116) - -
1 916.11 Plug - -
4 917 Metal strap - 550.01, 920.01
3400.5/10-EN
4 920.01 Nut - -
Number of stages x 3 920.02120) Nut (diffuser) - -

Water Supply
Related Documents

recommended:
4 920.03 Nut - -
Number of stages 940.01 Key116) - -
1 940.02119) Key116) - -
3400.5/10-EN
Water Supply
Related Documents
List of UPA 200B components
901.11
75-6
545
759 751
529
58--1 756
752.11 Intermediate bearing in the first stage

752.12 for pumps with ≥ 8 stages
902.11
825
920.11 521
931
901.01 940.01
513
545 932
550.01
550.02
529
270
902.01 Axial thrust balancing in the pump:
1 × for ≤ 10 stages; 2 × for ≥ 11 stages
412.01
920.01
108 232
502
540
520.01 525.01
503
211
502
940.01 520.02
525.02 849
900
503 143 904.02
940.02 412.02
211
849
106
900
143 904.01
904.02
412.02
901.02
3400.5/10-EN
920.02
UPA 200B with connection to a UMA 200D motor UPA 200B with connection to a UMA 150E motor

122) For UMA 150E only
125) 2 pieces for pumps ≥ 8 stages
Water Supply
Related Documents
List of UPA 200B components

addition:
1 58-1 Protecting plug 121) - 513
1 75-6 Valve disc guide Incl. 752.12, 756, 759 -
1 106 Suction casing Incl. 502 143, 412.01, 900
1 108 Stage casing (last stage) Incl. 270, 545, 752.11, 412.01, 58-1, 513,
902.01 920.01
Number of stages -1 108 Stage casing Incl. 270, 502, 540, 902.01 412.01, 920.01
1 143 Suction strainer 121) - 900
1 211 Pump shaft - 550.01, 932, 940.01/.02
Number of stages 232 Clockwise impeller Incl. 503 550.02
Number of stages 270 Deflector - -
Number of stages 412.01 O-ring 121) - -
1 412.02 O-ring 121) - -
Number of stages 502 Casing wear ring 121) - 503
121)
Number of stages 503 Impeller wear ring - 502
1 513 Replacement ring - -
Number of stages -1 520.01 Sleeve - 540
1 520.02 122) Sleeve - -
1 521 123) Stage sleeve - -
1 525.01 122) Spacer sleeve - -
1 525.02 124) Spacer sleeve - -
1 125) 529 Bearing sleeve 121) - 545
Number of stages -1 540 Bush - 520.01
125) 121)
1 545 Bearing bush - 529
1 550.01 Disc 121) - -
123)
10 550.02 Disc 121) - -
1 751 Valve body Incl. 75-6, 752.11/.12, 756, 920.11
759, 901.11, 902.11
1 752.11 Valve seat - 752.12
1 759 Valve disc - 752.12
1 per cable 825 Cable guard - 931
1 849 Sleeve coupling - 904.01, 904.02, 940.02
3 900 Screw/bolt 121) - -
4 901.02 124) Hexagon head bolt - -
Number of stages x 8 902.01 Stud - -
8 902.11 Stud - -
2 904.01 124) Grub screw 121) - -
1 904.02 Grub screw 121) - -
Number of stages x 8 920.01 Nut - -
4 920.02 124) Nut - -
8 920.11 Nut - -
1 per cable 931 Lock washer - -
1 932 123) Circlip 121) - -
Number of stages 940.01 Key 121) - -
3400.5/10-EN
124) 121)
1 940.02 Key - -
Water Supply
Related Documents
914.11
753 901.11
751
550.11
75--6
752.12 756
752.11
759
211
902.11
58--1
920.11 849
81--39
901.01 904.01
931
545.02 412.02
550.01
232 106
108
940.03 Connection to a 150E motor
412.01
502.02
940.01
940.04
520
940.02
540
525.01 106
825
529.02 211
529.01
503 270 940.05
902.01 545.01
904.02
920.01 502.01
901.02
849 211 849
920.02 904.01 412.02
143 106
940.05
900.01
904.03
901.02
3400.5/10-EN
920.02
UPA 250C with connection to a UMA 250D motor Connection to a UMA 200D motor
Water Supply
Related Documents
525.02
106
211
211 412.02
500.01
940.05
904.04 940.05
902.02
106 562.01
904.05
904.04 920.03
849
849
Connection to a UMA 300D motor Connection to a 14D / VBD motor

addition:
1 58-1 Protecting plug 126) - -
1 75-6 Valve disc guide Incl. 550.11, 752.12, 753, -
756, 759, 914.11
1 per cable 81-39 Cable clip - -
1 106 Suction casing Incl. 412.01, 502.01, 502.02 143, 900.01
1 108 Stage casing (last stage) Incl. 270, 412.01, 58-1, 920.01
545.01/.02, 752.11, 902.01
Number of stages -1 108 Stage casing Incl. 270, 412.01, 920.01
502.01/.02, 540, 545.01/.02,
902.01
1 143 Suction strainer 126) - 900.01
1 211 Pump shaft - 940
Number of stages 232 Clockwise impeller Incl. 503 -
Number of stages 270 Deflector - -
Number of stages +1 412.01 O-ring 126) - -
1 412.02 O-ring 126) - -
1 500.01 Ring - 412.02
Number of stages 502.01 Casing wear ring 126) - -
Number of stages 502.02 Casing wear ring 126) - 503
126)
Number of stages 503 Impeller wear ring - 502.02
Number of stages - number of 520.01 Sleeve 126) - 540
pump bearings 127)
Number of pump bearings 127) 525.01 Spacer sleeve - -
Number of pump bearings 127) 529.01 Bearing sleeve 126) - 545.01
Number of pump bearings 127) 529.02 Bearing sleeve 126) - 545.02
126)
Number of stages - number of 540 Bush - 520
pump bearings 127)
3400.5/10-EN
Number of pump bearings 127) 545.01 Bearing bush 126) - 529.01

127)
Number of pump bearings 545.02 Bearing bush 126) - 529.02
1 550.01 Disc - -
1 550.11 Disc - -
2 562.01 Parallel pin 126) - -

127) Up to 3 stages: 1 bearing; 4 and more stages: 2 bearings
Water Supply
Related Documents

addition:
1 751 Valve body Incl. 412.01, 752.12, 901.11, 920.11
902.11
1 752.11 Valve seat - 752.12
1 752.12 Valve seat (rubber) 126) - -
1 753 Valve plug Incl. 550.11, 752.12, 75-6, -
756, 759, 914.11
1 756 Valve spring Incl. 550.11, 752.12, 753, -
75-6, 759, 914.11
1 759 Valve disc Incl. 550.11, 752.12, 753, -
75-6, 756, 914.11
1 per cable 825 Cable guard - -
1 849 Sleeve coupling - 412.02, 562.01, 904,
940.05
3 900.01 Screw/bolt 126) - -
Number of stages x 8 128) 902.01 Stud - -
Number of stages x 12129) 902.01 Stud - -
8 902.02 Stud - -
8 128) 902.11 Stud - -
12 129) 902.11 Stud - -
1 904.01 Grub screw 126) - -
126)
2 904.02 Grub screw - -
126)
4 904.03 Grub screw - -
2 904.04 Grub screw 126) - -
2 904.05 Grub screw 126) - -
1 914.11 Hexagon socket head cap screw - -
Number of stages x 8 128) 920.01 Nut - -
Number of stages x 12 129) 920.01 Nut - -
4 920.02 Nut - -
8 920.03 Nut - -
8 128) 920.11 Nut - -
12 129) 920.11 Nut - -
1 per cable 931 Lock washer - -
Number of stages - number of 940.02 Key 126) - -
pump bearings 127)
Number of pump bearings 127) 940.03 Key 126) - -
127) 126)
Number of pump bearings 940.04 Key - -
126)
1 940.05 Key - -
3400.5/10-EN
128) For pump sets with ≤ 8 stages

129) For pump sets with ≥ 9 stages
Water Supply
Related Documents
901.11
751
756 751 901.11
752.12
759
752.11 751
756
412.01 759 752

900.21
902.11 721 412.11
902.11
920.11
81-39.21 920.11
58-1 921
545.01 Pump end UPA 300-94

506
529.01
108.01
940.01 901.11
71-12
825 71-12
502.01
232 902.11
902.01 902.11
920.11 920.11
920.01
540.01
Version with connection nozzles
108.02 520.01
231 412.02
502.02
81-39.22
106 71-2
900.21
211
920.02
211
940.02
143
143
904.01
901.01
940.02
849
900.01 904.01
901.02
849 920.03
412.03
904.02
106
901.01 920.02
3400.5/10-EN
UPA 300 with connection to a UMA 200D motor UPA 300 with connection to a UMA 250D or
UMA 300D motor

Water Supply
Related Documents

addition:
1 71-2 Collar - -
1 71-12 Connection nozzle Incl. 901.11, 902.11 920.11
1 per cable 81-39.21/. Cable clip - 900.21
22
1 106 Suction casing Incl. 502.02, 412.02 143, 900.01, 901.02
1 108.01 Stage casing (last stage) Incl. 412.01, 545.01, 902.01 58-1
Number of stages -1 108.02 Stage casing Incl. 412.02, 502.01, 540.01, -
902.01
1 143 Suction strainer 130) Incl. 920.02 900.01, 901.01
1 211 Pump shaft - 506, 940.01/.02, 921
1 231 Suction stage impeller - 940.01
Number of stages -1 232 Clockwise impeller - 940.01
1 412.01131) O-ring 130) - -
132)
Number of stages -1 412.01 O-ring 130) - -
Number of stages 412.02 131) O-ring 130) - -
133) 130)
1 412.03 O-ring - -
130)
1 412.11 O-ring - -
Number of stages -1 502.01 Casing wear ring 130) - -
1 502.02 Casing wear ring 130) - -
1 506 Retaining ring - -
Number of stages -1 520.01 Sleeve - -
1 529.01 Bearing sleeve 130) - 545.01
Number of stages -1 540.01 Bush - -
1 545.01 Bearing bush 130) - 529.01
1 721 Adapter Incl. 412.11 752
1 751 Valve body Incl. 752.11/.12, 756, 759, 920.11
901.11, 902.11
1 752.11 Valve seat - 752.12
1 752.12 Valve seat (rubber) - 752.11
1 759 Valve disc - 752.12
1 per cable 825 Cable guard - 81-39.21/.22, 900.21
1 849 Sleeve coupling - 904.01, 904.02, 940.02
3 900.01 133) Screw/bolt 130) - -
4 per cable 900.21 Screw/bolt 130) - -
133)
134) 130)
4 901.02 134) Hexagon head bolt - -
Number of stages x 12 902.01 Stud - 920.01
8 902.11 131) Stud - 920.11
12 902.11 132) Stud - 920.11
130)
2 904.01 Grub screw - -
134) 130)
4 904.01 Grub screw - -
1 904.02 133) Grub screw 130) - -
920.02 133)
3400.5/10-EN
4 Nut - -
3 920.02 134) Nut 130) - -
4 920.03 134) Nut - -
131)
8 920.11 Nut - -
132)
12 920.11 Nut - -
2 921 Shaft nut 130) - -
1 940.02 Key 130) - -
Water Supply
Related Documents
901.11
751
756
759
751
752 901.11
412.11
902.11 71-12
71-12
81-39.21
920.11
900.21 902.01
721
920.01
529.01
58-1
921 545.01
Connection nozzle
506
825
108.01
211
232
520.01
540.01
940.01 502.01
520.01
108.02
540.01
412.01 231
106 71-12
902.01
502.02 81-39.22 920.02 211
920.01
143
940.02
901.01
904.01
920.02 901.02
106
849
143 920.03
940.02
901.01
904.01
849
901.02
904.02
3400.5/10-EN
920.03 412.03
UPA 350 with connection to a UMA 200D motor UPA 350 with connection to a UMA 250D or
UMA 300D motor

137) Only for UMA 200D and 250D
Water Supply
Related Documents

addition:
1 71-2 Collar - -
1 71-12 Connection nozzle Incl. 901.11, 902.01 920.01
1 per cable 81-39.21/. Cable clip - 900.21
22
1 106 Suction casing Incl. 502.01, 412.01 143, 901.01
1 108.01 Stage casing (last stage) Incl. 412.01, 545.01, 902.01 58-1
Number of stages -1 108.02 Stage casing Incl. 412.02, 502.01, 540.01, -
902.01
1 143 Suction strainer 135) Incl. 920.02 901.01
1 211 Pump shaft - 506, 940.01/.02, 921
1 231 Suction stage impeller - 940.01
Number of stages -1 232 Clockwise impeller - 940.01
Number of stages -1 412.01 O-ring 135) - -
136)
1 412.03 O-ring 135) - -
1 412.11 O-ring 135) - -
135)
Number of stages -1 502.01 Casing wear ring - -
135)
1 502.02 Casing wear ring - -
1 506 Retaining ring - -
Number of stages -1 520.01 Sleeve - -
1 529.01 Bearing sleeve 135) - 545.01
Number of stages -1 540.01 Bush - -
1 545.01 Bearing bush 135) - 529.01
1 721 Adapter Incl. 412.11, 902.01 920.01
1 751 Valve body Incl. 752, 756, 759, 901.11, 920.11
902.11
1 752 Valve seat - -
1 759 Valve disc - 752
1 per cable 825 Cable guard - 81-39.21/.22, 900.21
1 849 Sleeve coupling - 904.01, 904.02, 940.02
4 per cable 900.21 Screw/bolt 135) - -
3 901.01 Hexagon head bolt 135) - -
137)
135)
Number of stages x 12 902.01 Stud - 920.01
12 902.11 Stud - 920.11
2 904.01 Grub screw 135) - -
138)
4 904.01 Grub screw 135) - -
136)
1 904.02 Grub screw 135) - -
3 920.02 Nut 135) - -
4 920.03137) Nut
12 920.11 Nut - -
2 921 Shaft nut 135) - -
135)
1 940.02 Key - -
3400.5/10-EN
Water Supply
Related Documents
Power cables
Main applications
▪ For use with drinking water applications
▪ Motor lead for submersible motors, cable laid under water
▪ Extension cable for the motor lead, cable laid freely
exposed to air
Operating data
Operating properties
Rated voltage VN [V] ≤ 1000
Ambient temperature T [°C] ≤ 50
Immersion depth IM [m] ≤ 500
Designation
Example:
ZN 1391 - G FL GWT -J 4G25 - Cu-Rubber
Designation key
Code Description
ZN Works standard
G Insulation, rubber
FL Type of power cable
FL Flat
RD Round
GWT Suitable for drinking water
J Information about earth conductor
J With earth conductor
O Without earth conductor
4G25 Number of cores
4G25 With earth conductor, 4-core, cross-section
25 mm2
3x25 Without earth conductor, 3-core, cross-
section 25 mm2
Cu-rubber Material
Design details
▪ 3-core or 4-core rubber-sheathed cable
Comprising:
– Stranded copper conductor
– Bare
– Core insulation and outer sheath made of a special
EPR-based rubber compound (ethylene propylene
rubber)
– Blue
Cable designs
Cable type Characteristic
Flat cable
3400.5/10-EN
3 cores, flat
4 cores, flat
Round cable
1 core, round
4 cores, round
94 Power cables
Water Supply
Related Documents
Selection information
Permissible cable lengths for starting method: DOL

139)
Applies to 1 cable or 2 cables in parallel
Conditions:
▪ V = 400 V; ΔV = 3 %; T ≤ 30 °C; laid freely exposed to air and in contact with surfaces
400
300
Imax = 250 A 70 mm2
Imax = 202 A 50 mm2

200
Imax = 162 A 35 mm2
Imax = 131 A 25 mm2
Imax = 99 A 16 mm2
100
90
80 Imax = 74 A 10 mm2
70
60 Imax = 53 A 6,0 mm2
50
Imax = 41 A 4,0 mm2
40
Imax = 30 A 2,5 mm2
30
Imax = 23 A 1,5 mm2
20
IN
[A]
10
9
8
7
6
5
2
A B
1
10 20 30 40 50 60 70 80 100 L [m] 200 300 400 500
Example A Example B
IN = 68 A IN = 68 A
Cable design: 1 x 16 mm2 Cable design: 1 x 25 mm2
3400.5/10-EN
Cable length: L ≤ 105 m Cable length: L ≤ 165 m
139) For parallel cables the value is doubled to obtain the permissible length.
Power cables 95
Water Supply
Related Documents
Permissible cable lengths for starting method: YΔ

Applies to 2 cables
Conditions:
▪ V = 400 V; ΔV = 3 %; T ≤ 30 °C; laid freely exposed to air and in contact with surfaces
Imax = 433 A 70 mm2
400 Imax = 350 A 50 mm2
300 Imax = 280 A 35 mm2
Imax = 227 A 25 mm2
200
Imax = 171 A 16 mm2
Imax = 128 A 10 mm2
100 Imax = 92 A 6,0 mm2

90
80 Imax = 71 A 4,0 mm2
70
60 Imax = 52 A 2,5 mm2
50
Imax = 40 A 1,5 mm2
40
30
20
IN
[A]
10
9
8
7
6
5
2
A B
1
10 20 30 40 50 60 70 80 100 L [m] 200 300 400 500
Example A Example B
IN = 27 A IN = 27 A
Cable design: 2 x 6.0 mm2 Cable design: 2 x 10 mm2
Cable length: L ≤ 145 m Cable length: L ≤ 235 m
3400.5/10-EN
96 Power cables
Water Supply
Related Documents
Voltage drop in the extension cable Starting method YΔ (2 cables):

When calculating the required conductor cross-section q not
only IN, but also the voltage drop ΔV along the cable length L
2,1 × L × IN × cos φ
ΔU = [%]
(distance from motor to control unit) must be taken into q×U
account. Proper functioning of our submersible motors ▪
requires ΔV ≤ 3 % of the supply voltage V.
If ΔV > 3 %, a larger conductor cross-section must be used.
The voltage drop is calculated using the following equations: Power loss ΔP:
ΔU
Starting method DOL/autotransformer ΔP = [%]
(cos φ)2
▪ 1 cable: ▪
3,1 × L × IN × cos φ Key

ΔU = [%]
q×U Code Description
L Single cable length [m]
▪ 2 cables in parallel (II):
IN Rated current [A]:
1,55 × L × IN × cos φ cos φ Power factor at 4/4 load
ΔU = [%]
q×U q Conductor cross-section [mm2]
U Supply voltage [V]
Maximum permissible rated motor current

For ambient temperature t ≤ 30 °C
Starting method Used as ... Imax [A]

for the following conductor cross-sections [mm2]
1,5 2,5 4 6 10 16 25 35 50 70 95
DOL Motor lead 29 38 52 67 94 125 166 205 256 316 517
(1 cable or 2 Extension cable 23 30 41 53 74 99 131 162 202 250 409
cables in parallel)
YΔ Motor lead 50 66 90 116 163 217 288 355 443 547 895
(2 cables) Extension cable 40 52 71 92 128 171 227 280 350 433 708
Dimensions and weights

Selection table: dimensions [mm]
Core type Conductor cross-section [mm2]
1,5 2,5 4 6 10 16 25 35 50 70 95
Height 5,2 +1,0 6,1 +1,5 7,0 +2,0 7,6 +2,2 9,3 +2,2 11,2 +2,3 13,0 +2,5 14,6 +2,9 17,0 +3,0 19,3 +2,7 -
Width 11,0 +2,0 13,2 +2,3 15,5 +3,5 17,4 +3,6 21,5 +3,5 26,7 +4,3 31,6 +3,9 35,5 +5,0 42,1 +4,9 48,4 +3,6 -
Height 5,2 +1,0 6,1 +1,5 - 7,6 +2,2 9,3 +2,2 11,2 +2,3 13,0 +2,5 - - - -
Width 14,5 +2,7 17,5 +2,5 - 23,5 +3,0 29,0 +3,5 35,0 +2,4 41,5 +4,5 - - - -
Diameter 5,3 +1,1 - - - - - - 13,8 +3,6 16,0 +3,8 18,5 +3,6 21,9 +1,5
Diameter 10,0 +2,0 12,0 +1,9 13,9 +2,0 15,7 +2,1 21,1 +2,1 24,5 +4,3 29,7 +4,3 33,3 +5,5 39,0 +5,6 44,2 +5,8 -
Selection table: weight [kg/m]

Conductor cross-section [mm2]
Core
type
1,5 2,5 4 6 10 16 25 35 50 70 95
0,110 0,171 0,252 0,319 0,486 0,750 1,107 1,438 2,054 2,760 -
0,165 0,237 - 0,440 0,704 1,026 1,457 - - - -
0,051 - - - - - - 0,499 0,699 0,940 1,140
0,180 0,259 0,356 0,475 0,837 1,220 1,770 2,304 3,185 4,364 -
3400.5/10-EN
Power cables 97
Water Supply
Related Documents
Cable connector
Application
For providing a sealed, water-tight connection between extension cables and motor leads of submersible motors.
▪ Ambient temperature: T ≤ + 50 °C
▪ Immersion depth: ≤ 500 m
Selection table
The table below only shows the cables on stock. Connectors for other cables on request.
Selection table
Motor Extension cable [mm2]
lead
[mm2] 1,5 2,5 4 6 10 16 25 35 50 70
Cable connector size
1,5 / 2,5 28 28 28 35 35 43 53 53 - -
4 - 35 35 35 35 43 53 53 - -
6 - - 35 35 35 43/29f 53/29f 53/29f - -
10 - - - 43 43/29f 43/29f 53/29f 53/29f - -
16 - - - - - 53 53 53 66 66
25 - - - - - - 66 66 66 66
35 - - - - - - - 66 66 66
50 - - - - - - - 66 66 66
70 - - - - - - - - - 66
1,5 / 2,5 28 28 28 35 35 43 53 53 - -
4 - 35 35 35 35 43 53 53 - -
6 - - 35 35 35 43 53 53 - -
10 - - - 43 43 43 53 53 - -
16 - - - - - 53 53 53 66 66
25 - - - - - - 66 66 66 66
+
or
+
1,5 28 28 28 35 35 - - - - -
2,5 35 35 35 35 35 - - - - -
4 - - 35 35 35 43 - - - -
6 - - - 43 43 43 53 53 66 66
10 - - - 66 66 66 66 66 66 66
16 - - - - - 66 66 66 66 66
25 - - - - - - 78 78 78 -
1,5 / 2,5 / 4 28 28 28 28 35 43 - - - -
6 28 28 28 28 35 43 53 53 - -
10 - - 35 35 35 43 53 53 - -
16 - - - - 43 43 53 53 66 66
25 - - - - - 53 53 53 66 78
35 - - - - - - - 53 66 78
3400.5/10-EN
50 - - - - - - - - 66 78
70 - - - - - - - - - 78
35 - - - - - - - 35 - -
50 - - - - - - - - 35 -
70 - - - - - - - - - 35
98 Cable connector
Water Supply
Related Documents
Key
Cable symbols Description Cable designation
1-core, round G RD GWT - O 1 G
4-core, round G RD GWT - J 4 G
3-core, flat G FL GWT - O 3x ...

4-core, flat G FL GWT - J 4G ...
3400.5/10-EN
Cable connector 99
Water Supply
Related Documents
Cable clips
Applications
▪ Securing cables at the riser / discharge pipe.
▪ Suitable for use in normal or slightly aggressive water.
▪ Versions for use in more aggressive water (e.g. seawater) on request.
Selection table
Cable Weight Required strap length L [mm] per cable clip for the following risers
Cable clip
G 1 1/4 /
G 1 1/2 /
G 2 / DN
G 3 / DN
G 4 / DN
G 5 / DN
G 6 / DN
G 8 / DN
Type Number x ∅ of cores
DN 175
DN 250
DN 300
DN 350
DN 400
DN 32
DN 40
DN 65
[mm] [kg]
size
100
125
150
200
50
80
Flat 3 x 1.5 4 x 1.5 1 0,01 270 280 320 360 400 450 500 600 - - - - - -
to to
3 x 6,0 4 x 6.0
3 x 10 4 x 10 11 0,01 - - 350 400 450 550 650 800 950 1100 1300 1500 1700 1900
to to
3 x 70 4 x 70
Round 3 x 1.5 4 x 1.5 1 0,01 270 280 320 360 400 450 500 600 - - - - - -
to to
3 x 6.0 4 x 6.0
3 x 10 4 x 10 2 0,08 - - 350 400 450 550 650 800 950 1100 1300 1500 1700 1900
3 x 16 4 x 16 3a 0,19 - - 350 400 450 550 650 800 950 1100 1300 1500 1700 1900
3 x 25
3 x 35 4 x 25 3 0,19 - - - 450 500 600 700 850 1000 1150 1350 1550 1750 1950
3 x 50 4 x 35
3 x 70 4 x 50 3b 0,19 - - - 450 500 600 700 850 1000 1150 1350 1550 1750 1950
3 x 95 4 x 70 4 0,55 - - - - - 650 750 900 1050 1200 1400 1600 1800 2000
4 x 95
3 cables 1 x 50 7 0,6 - - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 70 8 0,6 - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 95 6 0,6 - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 120 9 0,6 - - - - 700 800 950 1100 1250 1450 1650 1850 2050
3 cables 1 x 150
Cable clip sizes
Size 1 Sizes 2, 3, 3a, 3b, 4 Sizes 6 to 9 Size 11

2
1
1 3
2
4
3
5
4
1 = cable 1 = screw band with tension screw (re-usable)

2 = riser 2 = cable guard
3 = plastic stud 3 = cable
4 = rubber strap 4 = metal strap
5 = riser
3400.5/10-EN
100 Cable clips

Water Supply
Related Documents
Flow velocity past the motor

Application
▪ Required motor cooling
v = 0 m/s
The flow velocity past the motor is not defined. The heat is dissipated freely. This heat dissipation must not be influenced or
hindered by any structures, and a supply of fresh water must be provided at all times.
▪ Example: pump set freely suspended in a vertical position inside a large tank
v > 0.2 m/s
v > 0.5 m/s
The flow velocity past the motor is defined for the installation conditions, see table below. Decisive factors are the inside well
diameter or the inside shroud diameter, the operating data and the outside dimensions of the pump.
▪ Example: pump set installed in a vertical position above the screen/filter in a well; values in accordance with the table below.
▪ Example: pump set installed in a horizontal position in a tank, fitted with a cooling shroud, or pump set installed in a vertical
position in a pump sump, fitted with a cooling shroud; values in accordance with the table below
Maximum permissible inside diameter of the well or shroud
Flow rate Flow Inside diameter of the well or shroud [mm]

velocity
Q [m³/h] v [m/s] For For For For For
UMA 150D UMA 200D UMA 250D UMA 300D 14D
UMA 150E UMA-S 200D
UMA-S 150E
15 ≥ 0,2 ≤ 215 - - - -
≥ 0,5 ≤ 175 - - - -
25 ≥ 0,2 ≤ 255 - - - -
≥ 0,5 ≤ 195 - - - -
50 ≥ 0,2 ≤ 330 ≤ 350 - - -
≥ 0,5 ≤ 235 ≤ 265 - - -
75 ≥ 0,2 ≤ 390 ≤ 410 ≤ 430 - -
≥ 0,5 ≤ 270 ≤ 300 ≤ 330 - -
100 ≥ 0,2 ≤ 445 ≤ 460 ≤ 480 - -
≥ 0,5 ≤ 300 ≤ 325 ≤ 355 - -
125 ≥ 0,2 ≤ 490 ≤ 510 ≤ 525 - -
≥ 0,5 ≤ 330 ≤ 350 ≤ 380 - -
150 ≥ 0,2 ≤ 535 ≤ 550 ≤ 565 ≤ 590 -
≥ 0,5 ≤ 355 ≤ 380 ≤ 400 ≤ 430 -
175 ≥ 0,2 ≤ 575 ≤ 590 ≤ 605 ≤ 625 -
≥ 0,5 ≤ 380 ≤ 400 ≤ 420 ≤ 450 -
200 ≥ 0,2 ≤ 615 ≤ 625 ≤ 640 ≤ 660 ≤ 690
≥ 0,5 ≤ 405 ≤ 420 ≤ 445 ≤ 470 ≤ 510
250 ≥ 0,2 ≤ 680 ≤ 690 ≤ 705 ≤ 725 ≤ 750
≥ 0,5 ≤ 445 ≤ 460 ≤ 480 ≤ 505 ≤ 540
300 ≥ 0,2 ≤ 745 ≤ 755 ≤ 765 ≤ 780 ≤ 800
≥ 0,5 ≤ 485 ≤ 500 ≤ 515 ≤ 540 ≤ 570
350 ≥ 0,2 - ≤ 810 ≤ 820 ≤ 835 ≤ 860
≥ 0,5 - ≤ 530 ≤ 550 ≤ 570 ≤ 600
400 ≥ 0,2 - ≤ 865 ≤ 875 ≤ 890 ≤ 910
≥ 0,5 - ≤ 565 ≤ 580 ≤ 605 ≤ 630
3400.5/10-EN
500 ≥ 0,2 - ≤ 960 ≤ 970 ≤ 985 ≤ 1000

≥ 0,5 - ≤ 625 ≤ 640 ≤ 660 ≤ 690
600 ≥ 0,2 - ≤ 1050 ≤ 1055 ≤ 1070 ≤ 1090
≥ 0,5 - ≤ 680 ≤ 695 ≤ 710 ≤ 740
800 ≥ 0,2 - ≤ 1205 ≤ 1215 ≤ 1225 ≤ 1240
≥ 0,5 - ≤ 775 ≤ 790 ≤ 805 ≤ 830
1000 ≥ 0,2 - ≤ 1345 ≤ 1350 ≤ 1360 ≤ 1370
≥ 0,5 - ≤ 865 ≤ 875 ≤ 890 ≤ 910
1200 ≥ 0,2 - - - ≤ 1485 ≤ 1500
Flow velocity past the motor 101

Water Supply
Related Documents
Flow rate Flow Inside diameter of the well or shroud [mm]

velocity
Q [m³/h] v [m/s] For For For For For
UMA 150D UMA 200D UMA 250D UMA 300D 14D
UMA 150E UMA-S 200D
UMA-S 150E
1200 ≥ 0,5 - - - ≤ 965 ≤ 980
1400 ≥ 0,2 - - - ≤ 1600 ≤ 1610
≥ 0,5 - - - ≤ 1030 ≤ 1050
1600 ≥ 0,2 - - - ≤ 1705 ≤ 1720
≥ 0,5 - - - ≤ 1100 ≤ 1120
1800 ≥ 0,2 - - - ≤ 1805 ≤ 1820
≥ 0,5 - - - ≤ 1165 ≤ 1180
2000 ≥ 0,2 - - - ≤ 1900 ≤ 1910
≥ 0,5 - - - ≤ 1225 ≤ 1240
3400.5/10-EN
102 Flow velocity past the motor

09/04/2020
3400.5/10-EN
KSB SE & Co. KGaA

Johann-Klein-Straße 9 • 67227 Frankenthal (Germany)
Tel. +49 6233 86-0
www.ksb.com

Type Series Booklet: Submersible Borehole Pump

Uploaded by

Copyright:

Available Formats

Type Series Booklet: Submersible Borehole Pump

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Type Series Booklet: Submersible Borehole Pump

Uploaded by

Copyright:

Available Formats

Submersible Borehole Pump

6 inch - UPA 150C

Type Series Booklet

© KSB SE & Co. KGaA, Frankenthal 09/04/2020

Dimensions and weights.............................................................................................................................................. 97

General overview, 50 Hz

5 10 50 100 Q [Imp. g.p.m.] 500 1000 5000 10000

UPA 200B 500

0,2 0,5 1 2 5 10 20 Q [l/s] 50 100 200 500 1000

General overview, 50 Hz 5

Overview of submersible motors

6 General overview, 50 Hz

Operating properties ▪ Extension cable connected with water-tight cable

▪ Axial thrust is balanced by a tilting-pad thrust bearing in

Example: UPA 150C - 16 / 9

Material selection for UMA 150E motors, DN 100

2) For motors < 18.5 kW

Product information ▪ The efficiency of a pump with a trimmed impeller is

Information on characteristic curves

France Approved in accordance with the

30 40 50 60 80 100 Q [U.S. gpm] 200 300

20 30 40 50 60 80 100 Q [Imp. g.p.m.] 200 300

H UPA 150C - 16 400

Fig. 1: Selection chart UPA 150C

UPA 150C - 16/..., number of stages 1 - 20

Alternative pump ends are possible.

Dimensions of UPA 150C - 16 / ... [mm]

Dimensions, weights and installation type depending on the motor [mm]

16/1 336 607 40 139 16 - - - - - - ✘ ✘

Number × cross-section of cores

H0 PN T max IN ηM cos φ DOL Y-Δ

4) Length of pump end fitted as standard

UPA 150C - 16/..., number of stages 21 - 40

Alternative pump ends are possible.

Dimensions of UPA 150C - 16 / ... [mm]

Dimensions, weights and installation type depending on the motor [mm]

16/21 - - - - - 1578 2387 40 142 142 91 ✘ ✘

Number × cross-section of cores

H0 PN T max IN ηM cos φ DOL Y-Δ

6) Length of pump end fitted as standard

UPA 150C - 30/..., number of stages 1 - 18

Alternative pump ends are possible.

Dimensions of UPA 150C - 30 / ... [mm]

Dimensions, weights and installation type depending on the motor [mm]

30/1 389 686 48 139 17 - - - - - - ✘ ✘

Number × cross-section of cores

H0 PN T max IN ηM cos φ DOL Y-Δ

9) Length of pump end fitted as standard

UPA 150C - 30/..., number of stages 19 - 35

Alternative pump ends are possible.

Dimensions of UPA 150C - 30 / ... [mm]

Dimensions, weights and installation type depending on the motor [mm]

30/19 - - - - - 2149 3048 48 147 148 102 ✘ -13)

Number × cross-section of cores

H0 PN T max IN ηM cos φ DOL Y-Δ

11) Length of pump end fitted as standard

UPA 150C - 48/..., number of stages 1 - 14

Alternative pump ends are possible.

Dimensions of UPA 150C - 48 / ... [mm]