Scribd Logo
Upload

Welcome to Scribd!

  • 129 views

    VLF Ac Hipot Test Set 60kv

    Uploaded by

    Horacio Berni
    The document describes a VLF AC HIPOT TEST SET model SXVLF-60/0.1. It can output very low frequencies like 0.1 Hz, 0.05 Hz, and 0.02 Hz at voltages up to 60kV. It uses microprocessor control and closed-loop feedback to safely test electrical equipment. Its portability, clear display, data logging, and overvoltage protection make it suitable for indoor or outdoor use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    VLF Ac Hipot Test Set 60kv

    Uploaded by

    Horacio Berni
    129 views3 pages
    The document describes a VLF AC HIPOT TEST SET model SXVLF-60/0.1. It can output very low frequencies like 0.1 Hz, 0.05 Hz, and 0.02 Hz at voltages up to 60kV. It uses microprocessor control and closed-loop feedback to safely test electrical equipment. Its portability, clear display, data logging, and overvoltage protection make it suitable for indoor or outdoor use.

    Original Description:

    Manual

    Original Title

    Vlf Ac Hipot Test Set 60kv

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a VLF AC HIPOT TEST SET model SXVLF-60/0.1. It can output very low frequencies like 0.1 Hz, 0.05 Hz, and 0.02 Hz at voltages up to 60kV. It uses microprocessor control and closed-loop feedback to safely test electrical equipment. Its portability, clear display, data logging, and overvoltage protection make it suitable for indoor or outdoor use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    129 views3 pages

    VLF Ac Hipot Test Set 60kv

    Uploaded by

    Horacio Berni
    The document describes a VLF AC HIPOT TEST SET model SXVLF-60/0.1. It can output very low frequencies like 0.1 Hz, 0.05 Hz, and 0.02 Hz at voltages up to 60kV. It uses microprocessor control and closed-loop feedback to safely test electrical equipment. Its portability, clear display, data logging, and overvoltage protection make it suitable for indoor or outdoor use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    VLF AC HIPOT TEST SET

    SXVLF-60/0.1

    General Information:
    VLF stands for Very Low Frequency. VLF is generally

    considered to be 0.1 Hz and lower, its major application is for

    testing solid dielectric cable, transformers, motors,

    generators, switchgear and other electrical apparatus.

    A VLF hipot is just an AC output tester but with an output

    frequency of 0.1 Hz or lower rathe r than 50/60Hz. Although

    the frequency is very low, it is still an alternating current with

    polarity reversals every half cycle. At 0.1 Hz output, rather

    than 60Hz, it takes 600 times less current and power to apply

    an AC voltage to a capacitive load, like a long cable.

    Features:
     Adapts microprocessor controlled, can realize voltage set-up/down,

    measuring and protecting automatically. Manual intervention is

    allowable even during the auto voltage boosting.

     Portable, easy to move.


     Large LCD can display waveform clearly, and test report can be printed.

    Built-in printer.

     The data of current, voltage, and waveform can be sampled at HV side.

     A high voltage output protective resistor is provided in the voltage boost

    body in the design and this eliminates the need of additional protective

    resistor connected outside.

     Closed-loop negative feedback circuit is adopted. No capacity rising

    during outputting.

     Over voltage and current protection: When the output is beyond the

    limitation, the control unit will shut itself down within 20ms.

    Specifications

     Peak voltage: 60kV

     Output frequency: 0.1Hz, 0.05Hz and 0.02 Hz (selectable)


     Fuse: 20A
     Maximum load capacity: 0.5μ[email protected]; 1.0μ[email protected]; 2.5μ[email protected]

     Power supply: 110V ±10%, 60Hz ±5% (If using a portable generator,
    make sure the output voltage and frequency are stable. Power >3kW.)

     Output voltage accuracy: peak voltage instability ≤1%; frequency


    instability ≤3%.

     Voltage waveform distortion: ≤5％.


     Working environment: indoor or outdoor; -10℃-+50℃; 85%RH.
     Weight: Control unit - 4kg; HV unit I: 25kg; HV unit II: 45kg.

    Remarks: Capacitance of test object cannot be larger than the maximum value

    of the test instrument. If capacitance of test object is smaller than 0.05μF, the
    hipot should be equipped with an auxiliary device (supplied by Sansion Power
    Electric at your option).
    Screen Display:

    Packing List:

    Controller 1 pc
    60kV Booster (HV Unit) 1 pc
    HV Capacitor 1 pc

    LV Output Cable 2 pcs


    60kV High Voltage Connecting Cable 1 pc

    HV Output Cable 1 pc
    Ground Wire 1 pc
    Power Cord 1 pc

    Fuse 20A 4 pcs


    Print paper 2 rolls
    Discharge Rod 1 pc

    Manual 1 pc
    Test Report 1 pc

    You might also like