STTH5R06

Turbo 2 ultrafast high voltage rectifier

Datasheet - production data

A K
Description
K The device is developed using ST's Turbo 2
600 V technology. It is well-suited as a boost
diode, especially for use in continuous mode
power factor corrections and hard switching
conditions.
A This device is also intended for use as a free
A K wheeling diode in power supplies and other
TO-220AC power switching applications.
K TO-220FPAC
Table 1: Device summary
K Symbol Value
IF(AV) 5A
VRRM 600 V
D²PAK A
Tj (max.) 175 °C
NC VF (typ.) 1.40 V
trr (max.) 25 ns
K K

A A
NC NC
DPAK

Features
 Ultrafast switching
 Low reverse recovery current
 Reduces switching losses
 Low thermal resistance
 Insulated package: TO-220FPAC
 Insulation voltage: 2000 VRMS sine
 ECOPACK®2 compliant component for
DPAK on demand

October 2016 DocID7976 Rev 12 1/17

This is information on a product in full production. www.st.com
Characteristics STTH5R06

1 Characteristics
Table 2: Absolute ratings (limiting values at 25 °C, unless otherwise specified)
Symbol Parameter Value Unit
VRRM Repetitive peak reverse voltage 600 V
TO-220AC
TO-220FPAC 20
IF(RMS) Forward rms current D²PAK A

DPAK 10
TO-220AC
Average forward current TC = 135 °C DPAK
IF(AV) D²PAK 5 A
δ = 0.5, square wave
TC = 105 °C TO-220FPAC
Surge non repetitive forward
IFSM tp = 10 ms sinusoidal 50 A
current
Tstg Storage temperature range -65 to +175 °C
Tj Maximum operating junction temperature 175 °C

Table 3: Thermal parameter

Symbol Parameter Max. value Unit
TO-220AC / DPAK / D²PAK 3.0
Rth(j-c) Junction to case °C/W
TO-220FPAC 5.5

Table 4: Static electrical characteristics

Symbol Parameter Test conditions Min. Typ. Max. Unit
Tj = 25 °C - 20
IR(1) Reverse leakage current VR = VRRM µA
Tj = 125 °C - 25 250
Tj = 25 °C - 2.9
VF(2) Forward voltage drop IF = 5 A V
Tj = 125 °C - 1.4 1.8

Notes:
(1)Pulse test: tp = 5 ms, δ < 2%
(2)Pulse test: tp = 380 µs, δ < 2%

To evaluate the conduction losses, use the following equation:

P = 1.164 x IF(AV) + 0.128 x IF2(RMS)

2/17 DocID7976 Rev 12

STTH5R06 Characteristics
Table 5: Dynamic electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
IF = 0.5 A
Irr = 0.25 A - 25
IR = 1 A
Reverse recovery
trr Tj = 25 °C ns
time IF = 1 A
VR = 30 V - 40
dIF/dt = -50 A/µs
Reverse recovery
IRM - 5.0 6.0 A
current IF = 5 A
Sfactor Softness factor Tj = 125 °C VR = 400 V - 0.35 -
Reverse recovery dIF/dt = -200 A/µs
Qrr - 110 nC
charges
Forward recovery
tfr IF = 5 A - 150 ns
time
Tj = 25 °C VFR = 1.1 x VF(max.)
Forward recovery dIF/dt = 40 A/µs
VFP - 4.5 V
voltage

DocID7976 Rev 12 3/17

Characteristics STTH5R06
1.1 Characteristics (curves)
Figure 1: Conduction losses versus average Figure 2: Forward voltage drop versus forward
current current
P(W)
13
δ = 0.05 δ = 0.1 δ = 0.2 δ = 0.5
12
11
10 δ=1

9
8
7
6
5
4
3 T

2
1 IF(AV)(A) δ =tp/T tp
0
0 1 2 3 4 5 6 7

Figure 3: Relative variation of thermal impedance Figure 4: Relative variation of thermal impedance
junction to case versus pulse duration junction to case versus pulse duration
(TO-220AC, DPAK, D²PAK) (TO-220FPAC)
Zth(j-c) /R th(j-c) Zth (j-c) /R th(j-c )
1.0 1.0
0.9 0.9
0.8 0.8
0.7 0.7
δ = 0.5
0.6 0.6 δ = 0.5
0.5 0.5
0.4 δ = 0.2 0.4
0.3 δ = 0.1 0.3 δ = 0.2
T T
0.2 0.2 δ = 0.1
Single pulse
0.1 0.1 t p(s )
t p (s) δ=tp/T tp S ingle puls e δ = t p/T tp
0.0 0.0
1.E-03 1.E-02 1.E-01 1.E+00 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01

Figure 5: Peak reverse recovery current versus Figure 6: Reverse recovery time versus dIF/dt
dIF/dt (typical values) (typical values)
I (A ) t rr(ns)
22 R M 80
VR =400V VR = 400V
20 Tj =125°C
IF =2 x I F(AV )
Tj = 125°C
70
18
60 I = 2 x I (AV)
16 IF =I F(AV )
F F

14 I = I (AV)
IF =0.5 x I F(AV ) 50 F F
12 I = 0.5 x I (AV)
F F
IF =0.25 x I F(AV )
40
10
8 30
6 20
4
10
2 dIF/d t(A /µs) dIF/d t(A /µs)
0 0
0 200 400 600 800 1000 0 200 400 600 800 1000

4/17 DocID7976 Rev 12

STTH5R06 Characteristics
Figure 7: Reverse recovery charges versus dIF/dt Figure 8: Softness factor versus dIF/dt
(typical values) (typical values)
Qrr (nC) S factor
350 0.70
VR = 400V I = I (AV)
F F
Tj = 125°C V = 400 V
300 I = 2 x I (AV) 0.60 R
T = 125 °C
F F j

250
0.50

200 I = I (AV)
F F
0.40
150
I = 0.5 x I (AV) 0.30
F F
100
0.20
50
dI F / dt (A /µs) dI F/dt(A/µs )
0 0.10
0 200 400 600 800 1000 0 200 400 600 800 1000

Figure 9: Relative variations of dynamic Figure 10: Transient peak forward voltage versus
parameters versus junction temperature dIF/dt (typical values)
VF P(V )
20
I = I (AV)
18 F F
Tj = 125 °C

16
14
12
10
8
6
4
2 dIF/d t(A /µs)

0
0 100 200 300 400 500

Figure 11: Forward recovery time versus dIF/dt Figure 12: Junction capacitance versus reverse
(typical values) voltage applied (typical values)
tfr(ns) C (pF)
120 100
I = I (AV) F = 1 MHz
F F
V = 1.1 x V max V = 30 V
FR F
osc FMS
100 Tj = 125 °C Tj = 25 °C

80

60

40

20
dIF/d t(A /µ s) VR (V)

0 10
0 100 200 300 400 500 1 10 100 1000

DocID7976 Rev 12 5/17

Characteristics STTH5R06
Figure 13: Thermal resistance junction to ambient Figure 14: Thermal resistance junction to ambient
versus copper surface under tab (DPAK) versus copper surface under tab (D²PAK)

6/17 DocID7976 Rev 12

STTH5R06 Package information

2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
 Cooling method: by conduction (C)
 Epoxy meets UL 94,V0
 Recommended torque value: 0.55 N·m (for TO-220FPAC / TO-220AC)
 Maximum torque value: 0.7 N·m (for TO-220FPAC / TO-220AC)

2.1 TO-220AC package information

Figure 15: TO-220AC package outline

DocID7976 Rev 12 7/17

Package information STTH5R06
Table 6: TO-220AC package mechanical data
Dimensions
Ref. Millimeters Inches
Min. Max. Min. Max.
A 4.40 4.60 0.173 0.181
C 1.23 1.32 0.048 0.051
D 2.40 2.72 0.094 0.107
E 0.49 0.70 0.019 0.027
F 0.61 0.88 0.024 0.034
F1 1.14 1.70 0.044 0.066
G 4.95 5.15 0.194 0.202
H2 10.00 10.40 0.393 0.409
L2 16.40 typ. 0.645 typ.
L4 13.00 14.00 0.511 0.551
L5 2.65 2.95 0.104 0.116
L6 15.25 15.75 0.600 0.620
L7 6.20 6.60 0.244 0.259
L9 3.50 3.93 0.137 0.154
M 2.6 typ. 0.102 typ.
Diam 3.75 3.85 0.147 0.151

8/17 DocID7976 Rev 12

STTH5R06 Package information
2.2 TO-220FPAC package information
Figure 16: TO-220FPAC package outline

A
H B

Dia

L6

L2 L7

L3

L5

D
F1

L4

F E
G1

DocID7976 Rev 12 9/17

Package information STTH5R06
Table 7: TO-220FPAC package mechanical data
Dimensions
Ref. Millimeters Inches
Min. Max. Min. Max.
A 4.40 4.60 0.173 0.181
B 2.50 2.70 0.098 0.106
D 2.50 2.75 0.098 0.108
E 0.45 0.70 0.018 0.027
F 0.75 1.00 0.030 0.039
F1 1.15 1.70 0.045 0.067
G 4.95 5.20 0.195 0.205
G1 2.40 2.70 0.094 0.106
H 10.00 10.40 0.393 0.409
L2 16.00 typ. 0.630 typ.
L3 28.60 30.60 0.126 1.205
L4 9.80 10.60 0.386 0.417
L5 2.90 3.60 0.114 0.142
L6 15.90 16.40 0.626 0.646
L7 9.00 9.30 0.354 0.366
Dia. 3.00 3.20 0.118 0.126

10/17 DocID7976 Rev 12

STTH5R06 Package information
2.3 DPAK package information
Figure 17: DPAK package outline

This package drawing may slightly differ from the physical package. However, all
the specified dimensions are guaranteed.

DocID7976 Rev 12 11/17

Package information STTH5R06
Table 8: DPAK package mechanical data
Dimensions
Ref. Millimeters Inches
Min. Max. Min. Max.
A 2.18 2.40 0.085 0.094
A1 0.90 1.10 0.035 0.043
A2 0.03 0.23 0.001 0.009
b 0.64 0.90 0.025 0.035
b4 4.95 5.46 0.194 0.215
c 0.46 0.61 0.018 0.024
c2 0.46 0.60 0.018 0.023
D 5.97 6.22 0.235 0.244
D1 4.95 5.60 0.194 0.220
E 6.35 6.73 0.250 0.265
E1 4.32 5.50 0.170 0.216
e 2.286 typ. 0.090 typ.
e1 4.40 4.70 0.173 0.185
H 9.35 10.40 0.368 0.409
L 1.0 1.78 0.039 0.070
L2 1.27 0.050
L4 0.60 1.02 0.023 0.040
V2 -8° +8° -8° +8°

Figure 18: DPAK recommended footprint (dimensions in mm)

12/17 DocID7976 Rev 12

STTH5R06 Package information
2.4 D²PAK package information
Figure 19: D²PAK package outline

DocID7976 Rev 12 13/17

Package information STTH5R06
Table 9: D²PAK package mechanical data
Dimensions
Ref. Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 4.40 4.60 0.173 0.181
A1 0.03 0.23 0.001 0.009
b 0.70 0.93 0.028 0.037
b2 1.14 1.70 0.045 0.067
c 0.45 0.60 0.018 0.024
c2 1.23 1.36 0.048 0.053
D 8.95 9.35 0.352 0.368
D1 7.50 7.75 8.00 0.295 0.305 0.315
D2 1.10 1.30 1.50 0.043 0.051 0.060
E 10 10.40 0.394 0.409
E1 8.50 8.70 8.90 0.335 0.343 0.346
E2 6.85 7.05 7.25 0.266 0.278 0.282
e 2.54 0.100
e1 4.88 5.28 0.190 0.205
H 15 15.85 0.591 0.624
J1 2.49 2.69 0.097 0.106
L 2.29 2.79 0.090 0.110
L1 1.27 1.40 0.049 0.055
L2 1.30 1.75 0.050 0.069
R 0.4 0.015
V2 0° 8° 0° 8°

14/17 DocID7976 Rev 12

STTH5R06 Package information
Figure 20: D²PAK recommended footprint (dimensions are in mm)

DocID7976 Rev 12 15/17

Ordering information STTH5R06

3 Ordering information
Table 10: Ordering information
Order code Marking Package Weight Base qty. Delivery mode
STTH5R06D STTH5R06D TO-220AC 1.90 g 50 Tube
STTH5R06G-TR STTH5R06G D²PAK 1.48 g 1000 Tape and reel
STTH5R06FP STTH5R06FP TO-220FPAC 1.90 g 50 Tube
STTH5R06B STTH5 R06B DPAK 0.30 g 75 Tube
STTH5R06B-TR STTH5 R06B DPAK 0.30 g 2500 Tape and reel

4 Revision history
Table 11: Document revision history
Date Revision Changes
17-Feb-2011 9 Last issue.
Added insulated package text in Features. Corrected
typographical errors in Table 10. Updated TO-220FPAC,
01-Aug-2014 10
D2PAK and DPAK package information and reformatted
to current standard.
18-Sep-2014 11 Updated Figure 18, Figure 19 and Table 4.
Updated DPAK package information and reformatted to
19-Oct-2016 12
current standard.

16/17 DocID7976 Rev 12

STTH5R06

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2016 STMicroelectronics – All rights reserved

DocID7976 Rev 12 17/17