0% found this document useful (0 votes)
231 views12 pages

B Lathe Machine

1) The document describes two lathe models - a bench lathe and a gap bed lathe. 2) The bench lathe has features like a precision ground cast iron bed, induction hardened tracks, and a 3.4KW main drive motor. 3) The gap bed lathe has a hypercooled quenched bedway and dovetail saddle, 58mm spindle bore, and one piece cast iron base for rigidity.

Uploaded by

Eddie Univo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
231 views12 pages

B Lathe Machine

1) The document describes two lathe models - a bench lathe and a gap bed lathe. 2) The bench lathe has features like a precision ground cast iron bed, induction hardened tracks, and a 3.4KW main drive motor. 3) The gap bed lathe has a hypercooled quenched bedway and dovetail saddle, 58mm spindle bore, and one piece cast iron base for rigidity.

Uploaded by

Eddie Univo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

1

BENCH LATHE

*Picture shown with optional accessories

FEATURES:
• Precision ground and hardeded ccast-iron bed, DESCRIPTION UoM C0636D C6236
heavily ribbed Swing over bed mm Ø 360 Ø 356
• All tracks are induction-hardened and precion ground Swing over cross slide mm 224 220
• Headstock with D1-4 mount, bore diam 38mm, Swing over gap mm Ø 502 Ø 506
run in adjustable tapered roller bearings Length in gap mm 210 145
• All gears are made of high quality steel, hardened, General
Width of bed mm 187 206
Capacity
precion ground, with oil bath lubrication Distance between centers mm 1000 1000
• Powerful main drive(3.4KW),including base frame Cross slide travel mm 170 180
• Easy operating gear box has various feeding and Compound rest travel mm 95 95
cutting function Cutting tool max section mm 16 × 16 16 x 16
Taper of spindle MT#5 MT#5
STANDARD ACCESSORIES:
Diameter of spindle bore mm 38 Ø 38
• Three jaw chuck • Work light Main
Number of spindle speeds 8 16
• Four jaw chuck • Dead center MT3# spindle
• Face plate • Coolant system Range of spindle speeds RPM 70-2000 45-1800
• Steady rest • Reduction sleeve 5/3# Spindle nose D1-4 D1-4
• Follow rest • Metric changing gear Metric pitch threads mm 0.1-7 (44 kinds) 0.4-7 (22 kinds)
• Foot brake • Thread chasing dial Threads imperial pitches TPI 4-112 (42 kinds ) 4-56 (44 kinds)
• Chip tray • Tool box & tools Threading Threads metric pitches mm 0.1-7 (44 kinds) -
• Splash guard Threads diametral pitches DP 16-112 (25 kinds) -
Threads module pitches MP 0.1-1.75 (34 kinds) -
OPTIONAL ACCESSORIES: Range of longitudinal feeds mm/rev 0.046-3.249 (24 kinds) 0.043-0.653
• Driving plate • Tool Post Guard Feeding
Range of cross feeds mm/rev 0.01-0.703 (24 kinds) 0.027-0.413
• Chuck cover • Quick change tool post Diameter of leadscrew mm Ø 22 Ø 22
• Live center • Taper turning attachment Leadscrew
Pitch threads of leadscrew TPI/mm 8/3 8/4
• Tool post guard • Digital Read Out (DRO) Travel of tailstock quill mm 100 120
Tailstock Taper hole of tailstock quill MT#3 MT#3
Quill diameter mm 32 45
Power Main motor power Kw(HP) 1.5 (2) 1.5 / 2.4 (2/3)
Overall size of lathe (L × W × H) mm 1930 × 760 × 1530 1930x740x1200
Net / Gross weight Kg 540 / 645 750 / 880

2
GAP BED LATHE

*Picture shown with optional accessories


FEATURES:
• Hypercoustic quenched and accurate grinded bedway DESCRIPTION UoM C6241 x 1000 C6241 x 1500
and dovetail of saddle Swing over bed mm 410
• Ø 58 mm spindle bore Swing over cross slide mm 220
• One piece cast iron base, with well rigidity Swing over gap mm 640
• Hypercoustic quenched and accurate grinded Length in gap mm 165
main drive gear General
Width of bed mm 300
• Forced lubrication of headstock by oil pump Capacity
Distance between centers mm 1000 1500
• Clutch assembled in apron for avoiding Cross slide travel mm 285
overload automatic feed Compound rest travel mm 128
• Demountable gap bed is convenient to
Cutting tool max section mm 25 x 25
manufacture major diameter workpieces
Taper of spindle MT#6
• Convenient to cut thread without changing wheels
Diameter of spindle bore mm 58
• CE electrical compliances Main
• Foot brake giving rapid braking Number of spindle speeds 12
spindle
Range of spindle speeds RPM 25-2000
STANDARD ACCESSORIES: Spindle nose D1-6
• Steady rest • Three jaw selfcentering chuck Metric pitch threads mm 0.1-14 (41)
• Follow rest • Four jaw independent chuck Threads imperial pitches TPI 2-112 (60)
Threading
• Worklamp • Four station tool post Threads diametral pitches DP 4-112 (50)
• Face plate • Foot brake pedal Threads module pitches MP 0.1-7 (34)
• Reduce sleeve • Thread chasing dial Range of longitudinal feeds mm/rev 0.031-1.7
• Dead centers • Operation box with tools Feeding
Range of cross feeds mm/rev 0.014-0.784
• Coolant system • Operation manual Diameter of leadscrew mm Ø 35
• Live center • Thread Chasing Dial Leadscrew
Pitch threads of leadscrew TPI/mm 6 mm / 4 TPI
• Full length splash guard and chip tray Travel of tailstock quill mm 130
Tailstock Taper hole of tailstock quill MT#4
OPTIONAL ACCESSORIES:
Quill diameter mm 60
• Digital Read Out (DRO)
• Tool post guard Power Main motor power Kw (HP) 5.5 (7,5 )
• Chuck guard Overall size of lathe (L × W × H) mm 2200 x 1080 x 1340 2750 x 1080 x 1340
• Taper turning attachment Net / Gross weight Kg 1670 / 1980 1920 / 2265
• Quick change toopost

3
GAP BED LATHE

*Picture shown with optional accessories

FEATURE:
• Hypercoustic quenched and accurate grinded bedway DESCRIPTION UoM C6251 x 1000 C6251 x 1500
and dovetail of saddle Swing over bed mm 510
• Ø 80 mm spindle bore Swing over cross slide mm 305
• One piece cast iron base, with well rigidity Swing over gap mm 735
• Hypercoustic quenched and accurate grinded main drive gear Length in gap mm 170
• Forced lubrication of headstock by oil pump General
Width of bed mm 350
• Clutch assembled in apron for avoiding overload Capacity
Distance between centers mm 1000 1500
automatic feed Cross slide travel mm 316
• Demountable gap bed is convenient to manufacture Compound rest travel mm 130
major diameter workpieces
Cutting tool max section mm 25 × 25
• Convenient to cut thread without changing wheels
Taper of spindle MT#7
• CE electrical compliances
• Foot brake giving rapid braking Diameter of spindle bore mm 80
Main
Number of spindle speeds 12
spindle
STANDARD ACCESSORIES: Range of spindle speeds RPM 25-1600
• Face plate • Three jaw selfcentering chuck Spindle nose D1-8
• Steady rest • Four jaw independent chuck Metric pitch threads mm 0.2-14 (47)
• Follow rest • Four station tool post Threads imperial pitches TPI 2-112 (60)
Threading
• Reduce sleeve • Foot brake pedal Threads diametral pitches DP 4-112 (50)
• Dead centers • Thread Chasing dial Threads module pitches MP 0.1-7 (34)
• Worklamp • Operation box with tools Range of longitudinal feeds mm/rev 0.059-1.646 (35)
• Coolant system • Operation manual Feeding
Range of cross feeds mm/rev 0.020-0.573 (42)
• Live Center Diameter of leadscrew mm Ø 40
• Full length splash guard and chip tray Leadscrew
Pitch threads of leadscrew TPI/ mm 4 TPI / 6 mm
Travel of tailstock quill mm 180
OPTIONAL ACCESSORIES:
Tailstock Taper hole of tailstock quill MT#5
• Quick Change Toopost
Quill diameter mm 75
• Taper Turning Attachment
• Chuck Guard Power Main motor power KW (HP) 7.5 (10)
• Digital Read Out ( DRO ) Overall size of lathe (L × W × H) mm 2390 x 1150 x 1430 2850 x 1150 x 1430
• Tool Post Guard Net / Gross weight Kg 2025 / 2360 2335 / 2700

4
GAP BED LATHE

*Picture shown with optional accessories

FEATURE:
• Hypercoustic quenched and accurate grinded bedway DESCRIPTION UoM C6266BD
and dovetail of saddle Swing over bed mm Ø 660
• Ø 80 mm spindle bore Swing over cross slide mm Ø 440
• One piece cast iron base, with well rigidity Swing over gap mm Ø 900
• Hypercoustic quenched and accurate grinded main Length in gap mm 250
drive gear General
Width of bed mm 400
• Forced lubrication of headstock by oil pump Capacity
Distance between centers mm 2000
• Clutch assembled in apron for avoiding overload Cross slide travel mm 368
automatic feed
Compound rest travel mm 230
• Demountable gapped bed is convenient to manufacture
Cutting tool max section mm 25 x 25
major diameter workpieces
• Convenient to cut thread without changing wheels Taper of spindle MT5
• Five position self feed stop Diameter of spindle bore mm 105
Main
• Foot brake giving rapid braking Number of spindle speeds 16
spindle
Range of spindle speeds RPM 25 - 1600
STANDARD ACCESSORIES: Spindle nose D1 - 8
• Face plate • Three jaw selfcentering chuck Metric pitch threads mm 0.45 - 120 (54 steps)
• Steady rest • Four jaw independent chuck Threads imperial pitches TPI 7/16 - 80 (54 steps)
Threading
• Follow rest • Four station tool post Threads diametral pitches DP 7/8 - 160 (42 steps)
• Reduce sleeve • Foot brake pedal Threads module pitches MP 0.25 - 60 (46 steps)
• Dead centers • Thread chasing dial Range of longitudinal feeds mm/rev 0.044 - 1.48
• Worklamp • Operation box with tools Feeding
Range of cross feeds mm/rev 0.022 - 0.74
• Coolant system • Operation manual Diameter of leadscrew mm Ø 40
• Live Center • Thread Chasing Dial Leadscrew
Pitch threads of leadscrew TPI/mm 2 TPI / 12 mm
• Full length splash guard and chip tray
Travel of tailstock quill mm 235
OPTIONAL ACCESSORIES: Tailstock Taper hole of tailstock quill MT#5
• Quick Change Toopost Quill diameter mm Ø 90
• Taper Turning Attachment Power Main motor power Kw 7.5 (10)
• Chuck Guard Overall size of lathe (L × W × H) mm 3710 x 1230 x 1600
• Digital Read Out ( DRO ) Net / Gross weight Kg 3345 / 3835
• Tool Post Guard

5
GAP BED LATHE

*Picture shown with optional accessories

DESCRIPTION UoM CW6283C


Swing over bed mm 830
FEATURE: Swing over cross slide mm 550
• Hypercoustic quenched and accurate grinded bedway Swing over gap mm 1000
and dovetail of saddle Length in gap mm 300
• Ø 105 mm spindle bore General
Width of bed mm 550
• Hypercoustic quenched and accurate grinded main Capacity
Distance between centers mm 1500, 2000, 3000, 4500, 6000
drive gear Cross slide travel mm 480
• Low Spindle Speeds and high torque Compound rest travel mm 225
• Large Spindle Bore Cutting tool max section mm 30 x 30
• Heavy Duty Construction
Diameter of spindle bore mm 105
Number of spindle speeds 18
STANDARD ACCESSORIES: Main Spindle
• 3-Jaw Chuck & Flange • Coolant System Range of spindle speeds RPM 10 - 800
• 4-Jaw Chuck & Flange • Dead Centers Spindle nose C11 or D11
• Steady Rest • Reduction Sleeve Range of longitudinal feeds mm/rev 0.07 - 16.72
Feeding
• Follow Rest • Maintenance Kit Range of cross feeds mm/rev 0.04 - 9.6
• Face Plate • Foundation Bolts/Nuts Metric pitch threads mm 1-240 (53)
• Drive Plate • Level Blocks Threads imperial pitches TPI 2-30 (31)
Threading
• Working Lamp • Machine Tool Manual Threads diametral pitches DP 1/2 - 60 (46)
Threads module pitches MP 0.25 - 60 (47)
Diameter of leadscrew mm Ø 50
OPTIONAL ACCESSORIES: Lead-screw
Pitch threads of leadscrew mm 12
• Digital read Out ( DRO ) Travel of tailstock quill mm 270
• Tool Post Guard Tailstock Taper hole of tailstock quill MT#5
• Chuck Guard
Quill diameter mm 90
• Taper Turning Attachment
Power Main motor power KW 11
• Quick Change Toopost
• Live center Overall size of lathe (L × W × H) mm 4980 x 1250 x 1455 mm
•Automatic compound rest Weight Kg 4910
• Electric Turret

6
HEAVY DUTY LATHE

FEATURE : STANDARD ACCESSORIES: OPTIONAL ACCESSORIES:


• Hypercoustic quenched and accurate grinded bedway and • Steady Rest • 3-Jaw Chuck & Flange • Digital read Out ( DRO ) • Live center
dovetail of saddle • Follow Rest • 4-Jaw Chuck & Flange • Tool Post Guard • Chuck Guard
• Ø 105 mm spindle bore • Face Plate • Machine Tool Manual • Taper Turning Attachment • Foot brake
• Hypercoustic quenched and accurate grinded main drive gear • Drive Plate • Foundation Bolts/Nuts • Quick Change Toopost • Electric Turret
• Low Spindle Speeds and high torque • Working Lamp • Level Blocks • Automatic compound rest
• Large Spindle Bore • Coolant System • Maintenance Kit
• Heavy Duty Construction • Dead Centers • Reduction Sleeve *Picture shown with optional accessories

DESCRIPTION UoM CW62103C CW62123C CW62143C CW62163C CW62183C


Swing over bed mm 1030 1230 1430 1630 1830
Swing over cross slide mm 700 900 1100 1240 1440
Swing over gap mm 1200 1400 1600 1800 2000
General Width of bed mm 610
Capacity Distance between centers mm 1500 , 2000 , 3000 , 4500 , 6000
Cross slide travel mm 615 715 815 915
Compound rest travel mm 225 300
Cutting tool max section mm 30 x 30 30 x 30 30 x 30 30 x 30 30 x 30
Diameter of spindle bore mm 105 (OPT. 130)
Main Number of spindle speeds 18
spindle Range of spindle speeds RPM 10 - 800 7 - 576 6 - 480
Spindle nose C11 or D11
Range of longitudinal feeds mm/rev 0.07 - 16.72
Feeding
Range of cross feeds mm/rev 0.04 - 9.6
Metric pitch threads mm 1 - 240 (53)
Thread- Threads imperial pitches TPI 2 - 30 (31)
ing Threads diametral pitches DP 1/2-60 (47)
Threads module pitches MP
Lead- Diameter of leadscrew mm
screw Pitch threads of leadscrew mm 12
Travel of tailstock quill mm 270
Tailstock Taper hole of tailstock quill MT#6
Quill diameter mm 120
Power Main motor power KW 11
Overall size of lathe (L × W × H) 3465x1420x1410 mm 3465x1420x1510 mm 3465x1620x1610 mm 3465x1820x1710 mm 3465x1920x1810 mm
Weight 4050 4250 4450 4650 4870

NB : * Approx for machine with between center 1500 mm

7
VERTICAL LATHE

*Picture shown with optional accessories


FEATURE:
• Wagong casting parts
• ZWZ spindle and bearings
• Schneider electric components
• 4-jaw chuck
• 2-axis DRO
• Side head
• Square ram or pentagon turret

OPTIONAL ACCESSORIES:
• Bearings : SKF, FAG, NTN, TIMKEN

DESCRIPTION UoM C516 C5110 C5112 C5116 C5120


Max. turning diameter mm 630 1000 1250 1600 2000
Table diameter mm 630 900 1000 1400 1800
Max. height of workpiece mm 600 800 1000 1000 1250
Max. weight of workpiece T 0.8 2 3.2 5 8
Range of table speed RPM 60 - 200 8 - 250 6.3 - 200 5 - 160 3.2 - 100
Table speed steps steps 3 16 16 16 16
Range of feed rates mm/min 15 - 45 0.8 - 86 0.8 - 86 0.8 - 86 0.8 - 86
General
Max. cutting force KN 20 20 20 25 25
Capacity
Max. torque of table KN.m 10 12.5 12.5 25 25
Horizontal travel of rail head mm 500 670 700 915 1115
Vertical travel of rail head mm 500 800/650 (Turret) 800/650 (Turret) 1000/800 (Turret) 1000/800 (Turret)
Travel of cross rail mm 500 580 650 760 890
Swivel of rail head degree 30 30 30 30 30
Rapid traverse of rail head mm/min 1350 1800 1800 1800 1800
Elevating speed of cross rail mm/min 750 660 660 440 440
Max. turning diameter mm - 1000 1100 1400 1800
Side Max. cutting force KN - 15 20 20 20
Head Horizontal travel mm - 500 500 500 500
Vertical travel mm - 810 900 980 1150
Power Main motor power KW 11 22 22 30 30
Overall size of lathe (L × W × H) mm 2100x1400x2600 2187x2711x3230 2460x2330x3430 3000x2800x3900 3135x3040x3910
Net / Gross weight Kg 3000 7800 9000 12000 17000

8
GAP BED LATHE

*Picture shown with optional accessories


STANDARD ACCESSORIES:
• 3 - Jaw scroll chuck 10” *
DESCRIPTION UoM DY - 410 G DY - 510 G DY - 560 G
• 4 - Jaw chuck 20” * Swing over bed mm Ø 410 Ø 510 Ø 560
• Face plates 20” * Swing over cross slide mm Ø 230 Ø 320 Ø 310
• Rear splash guard * Swing over gap mm Ø 660 Ø 760 Ø 800
• Auto lubrication sytem General Width of bed mm 330 330 410
• Center & center sleeve Capacity Distance between centers mm 1100 1600 3000
• Coolant pump Cross slide travel mm 260 260 380
• Tailstock Compound rest travel mm 127 127 255
• Toolbox Cutting tool max section mm 25 x 25 25 x 25 25 x 25
• Steady rest * Diameter of spindle bore mm Ø 63 Ø 80 Ø 104
• Follow rest * Main Number of spindle speeds 12 12 12
• Manual tool post spindle Range of spindle speeds RPM 36 - 2000 36 - 2000 25 - 1250
• Rolling center (for DY-560G only) *
Spindle nose D1-6 D1-6 D1-8
Metric pitch threads mm 0.2 - 14 (45 kinds) 0.2 - 14 (45 kinds) 0.8-14
OPTIONAL ACCESSORIES:
• Soft jaw for 3 - jaw strong chuck Threads imperial pitches TPI 2 - 72 (45 Kinds) 2 - 72 (45 Kinds) 2 - 28 (45 Kinds)
Threading
• Collet chuck 3 - 25mm Threads diametral pitches DP 8 - 44 (41 Kinds) 8 - 44 (41 Kinds) 4 - 56 (41 Kinds)
• Fixed tool post (Quick change type) Threads module pitches MP 0.3 - 3.5 (18 kinds) 0.3 - 3.5 (18 kinds) 0.5 - 7 (18 kinds)
• Rear tool post Range of longitudinal feeds mm/rev 0.04 - 1 0.04 - 1 0.05 - 0.07
Feeding
• Larger spindle bore Range of cross feeds mm/rev 0.02 - 0.5 0.02 - 0.5 0.025 - 0.35
• DRO 2 axis Diameter of leadscrew mm Ø 35 Ø 35 Ø 45
Leadscrew
• Chuck guard Pitch threads of leadscrew 4 T. P.I or 6 pitch 4 T. P.I or 6 pitch 4 T. P.I or 6 pitch
• 2 speed tailstock Travel of tailstock quill mm 130 130 180
• Rapid traverse X / Z axis Tailstock Taper hole of tailstock quill MT#4 MT#4 MT#5
• Taper attachment Quill diameter mm Ø 65 Ø 75 Ø 75
• Grinder Power Main motor power HP 7.5 7.5 10
• CE standard includes rear splash, Overall size of lathe (L × W × H) mm 2370 x 1100 x 1700 2880 x 1100 x 1700 4800 x 1400 x 1630
tool post, chuck, lead screw guard,
Net / Gross weight Kg 2000 / 2200 2300 / 2500 3700 / 3900
CE electrical equipment

9
10
CNC LATHE MACHINE

FEATURES: STANDARD ACCESSORIES: OPTIONAL ACCESSORIES:


• High Grade LM guideway and ballscrew • Manual 3-Jaw Chuck/Collet (for L30/16A) • Hydraulic 3-Jaw Chuck • Hydraulic tailstock (N/A for L30/16A)
• Centralized Lubrication system ensures • Working lamp • 8 Pos Electric Turret 20 mm • Chip Conveyor and Bucket
long life span of motion parts • Automatic lubricating system • LNS Bar Feeder
• Higher and more stable machining precision • Coolant system
• High Precision Spindle Unit *Only L30/16A Slant Bed 45 deg

MACHINE SPECIFICATIONS MoU L30/16 *L30/16A L40/20 L36/19 L36/16


Controller (Selectable) GSK /FANUC/ SIEMENS
Max Swing Diameter Over Bed mm Ø350 Ø520 Ø440 Ø380 Ø350
Max Swing Diameter Over Slide mm Ø160 Ø160 Ø200 Ø190 Ø160
Capacity Max Turning Diameter (disk) mm 280 Ø380 Ø400 Ø280 Ø280
Max Machining Length mm 210 300 600 360 200
Max Bar Through Diameter mm Ø35 Ø35 Ø65 Ø50 Ø50
Spindle Bore mm Ø49 Ø45 Ø66 Ø63 Ø63
Spindle Nose A2-5 A2-5 A2-6 A2-6 A2-6
Spindle
Spindle Speed r/min 2800 4000 2600 2800 2800
Clamping Type 6” Manual Chuck Hyd Collet 8” Manual Chuck 8” Manual Chuck 8” Manual Chuck
Tools Type Gang Type Gang Type 4 Electric Tool Post 4 Electric Tool Post Gang Type
Tools OD Tool Size mm 20x20 20x20 25x25 25x25 20x20
Boring Tool Size mm Ø25 Ø25 Ø40 Ø32 Ø25
X/Z axis travel mm 280/350 400/350 240/800 280/550 280/350
X/Z Axis
X/Z axis rapid feed m/min 12/15 16/18 10/15 12/15 12/15
Main Motor Power kW 4 5.5 7.5 5.5 5.5
Motor X/Z axis driver Motor Torque (Power) Nm 6/6 6/6 7/10 6/6 6/6
Coolant Pump Power W 90 370 120 90 90
Tailstock Option N/A Standard Standard Option
Tailstock
Tailstock Taper M.T.4 N/A M.T.5 M.T.4 M.T.5
Weight Net Weight (Approximate) kg 1270 2250 2450 1850 1420
Size LxWxH mm 2100*1450*1600 2180*1600*1810 2700*1420*1730 2350*1450*1600 2100*1450*1600

11
BONTANG MEDAN TANJUNG MORAWA
KLS/P&A.561/5k/KLS.Lathe/Fau.uni/07.19

Tel. : (021) 582-8282 Tel. : 0811 581 4591 Tel. : (061) 452-7269 Tel. : (061) 794-1328
BALI CIKARANG PALEMBANG YOGYAKARTA
Tel. : (0361) 907-9320 Tel. : (021) 8984-5858 Tel. : (0711) 571-7788 Tel. : (0274) 642-9097,98,99
BALIKPAPAN CILEGON SAMARINDA
Tel. : (0542) 763-698 Tel. : (0254) 387-987 Tel. : (0541) 410-0637 Kawan Lama Industrial Solution
BANDUNG LAMPUNG SEMARANG BALIKPAPAN
Tel. : (022) 421-3939 Tel. : (0721) 474-480 Tel. : (024) 355-8788 Tel. : (0542) 870-3946
BATAM MAKASAR SURABAYA (Juanda) PEKANBARU
Tel. : (0778) 473-566 Tel. : (0882) 2736-5749 Tel. : (031) 868-8328 Tel. : (0761) 282-98

12

You might also like