Assignment Due  25 March 2010       
                                                                                                                                            
 
EE311 Analog Electronics #3

Include your SPICE text files for each question in your homework submission.

Q1)
Enhancement-type
PMOS
Vt = -2 V
k’p(W/L) = 2 mA/V2
λ=0
Enhancement-type
NMOS
Vt = 2 V
k’n(W/L) = 0.2 mA/V2
λ=0

VDD = +10 V,
CS1, CS2, CC are very large,
RS1 = 4 kΩ,
Rin = 200 kΩ

For your circuit design satisfying IDQ1 = 0.4 mA, IDQ2 = 2 mA, VDSQ1 = 4 V, VSDQ2 = 5 V, using
SPICE, plot the output voltage waveform for vi =1mV and calculate the small-signal voltage gain
Av = vo/vi.

Q2)

β1 = β2 = 75
VA1 = VA2 = ∞
VT = 25 mV
VBE(on) = 0.7 V

Using SPICE, plot the output current waveform for vs =1mV and calculate the small-signal
current gain Ai = io/is.
                                                                                                                                 Assignment Due  25 March 2010       
                                                                                                                                            
 
Q3) Using SPICE, plot the output voltage waveform for vi =1mV and calculate the small-signal
voltage gain Av = vo/vi.

Q1-Q2 parameters
β1 = β2 = 100
VA1 = VA2 = ∞
VT = 25 mV
VBE(on) = 0.7 V
RB1 = RB2 = RS = 10 kΩ
RE1 = RE2 = 4.7 kΩ
RC2 = 2.2 kΩ
RL = 3 kΩ
 

Q4) Using SPICE, plot the output voltage waveform for vi =1mV and calculate the small-signal
voltage gain Av = vo/vi.
Enhancement-type
PMOS
Vt = -2 V
k’p(W/L) = 2 mA/V2
λ=0
Ri = 0.5 kΩ
R1 = 8 kΩ
R2 = 22 kΩ
RS = 0.5 kΩ
RD = 2 kΩ
RL = 5 kΩ

Q5) Using SPICE, plot the output voltage waveform for vi =1mV and calculate the small-signal
voltage gain Av = vo/vi.
Q1 parameters
β = 200
VA = ∞
VT = 25 mV
VBE(on) = 0.7 V
M1 parameters
Kn = 2 mA/V2
VA = ∞
VTN = 1 V
VDD = 5 V
Ri = 100 kΩ
RG = 10 MΩ
RS = 6.8 kΩ
RC = 3 kΩ
RL = 1 kΩ