Komatsu Eo 15W040 LC CK-4 - 2021

SAFETY DATA SHEET
According to EC No 1907/2006 as amended as at the date of this SDS

Komatsu EO 15W-40 LA CK-4
Version 1.2 Revision Date 05.01.2021 Print Date 06.01.2021
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier

Trade name : Komatsu EO 15W-40 LA CK-4
Product code : 001G5830
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use of the : Engine oil.
Substance/Mixture
Uses advised against :
This product must not be used in applications other than those
listed in Section 1 without first seeking the advice of the
supplier.
1.3 Details of the supplier of the safety data sheet

Manufacturer/Supplier : Belgian Shell NV/SA
Kantersteen – Cantersteen 47
B-1000 Brussel - Bruxelles
Telephone : (+32) 02508 9298
Telefax :
Email Contact for Safety Data : If you have any enquiries about the content of this SDS
Sheet please email [email protected]
1.4 Emergency telephone number

: +32 2 2167469
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture

Classification (REGULATION (EC) No 1272/2008)
Based on available data this substance / mixture does not meet the classification criteria.
2.2 Label elements
Labelling (REGULATION (EC) No 1272/2008)

Hazard pictograms : No Hazard Symbol required
Signal word : No signal word
Hazard statements : PHYSICAL HAZARDS:

Not classified as a physical hazard
according to CLP criteria.
HEALTH HAZARDS:
Not classified as a health hazard under CLP
1 / 19 800010031239
BE
SAFETY DATA SHEET
criteria.
ENVIRONMENTAL HAZARDS:
Not classified as environmental hazard
according to CLP criteria.
Precautionary statements : Prevention:

No precautionary phrases.
Response:
Storage:
Disposal:
Safety data sheet available on request.
2.3 Other hazards

This mixture does not contain any REACH registered substances that are assessed to be a PBT or a
vPvB.
Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin resulting in
disorders such as oil acne/folliculitis.
Used oil may contain harmful impurities.
Not classified as flammable but will burn.
SECTION 3: Composition/information on ingredients

3.2 Mixtures
Chemical nature : Highly refined mineral oils and additives.
The highly refined mineral oil contains <3% (w/w) DMSO-
extract, according to IP346.
Classification based on DMSO extract content < 3%
(Regulation (EC) 1272/2008, Annex VI, Part 3, Note L).
: * contains one or more of the following CAS-numbers

(REACH registration numbers): 64742-53-6 (01-2119480375-
34), 64742-54-7 (01-2119484627-25), 64742-55-8 (01-
2119487077-29), 64742-56-9 (01-2119480132-48), 64742-65-
0 (01-2119471299-27), 68037-01-4 (01-2119486452-34),
72623-86-0 (01-2119474878-16), 72623-87-1 (01-
2119474889-13), 8042-47-5 (01-2119487078-27), 848301-69-
9 (01-0000020163-82), 68649-12-7 (01-2119527646-33),
151006-60-9 (01-2119523580-47), 163149-28-8 (01-
2119543695-30).
Hazardous components
Chemical name CAS-No. Classification Concentration
EC-No. (REGULATION (% w/w)
2 / 19 800010031239
BE
SAFETY DATA SHEET
Registration (EC) No
number 1272/2008)
Interchangeable low Asp. Tox.1; H304 0 - 90
viscosity base oil Not Assigned
(<20,5 cSt @40°C) *
Alkylated phenol ester 125643-61-0 Aquatic Chronic4; 1- 3

406-040-9 H413
Zinc 93819-94-4 Skin Irrit.2; H315 1 - 2,4

dialkyldithiophosphate 298-577-9 Eye Dam.1; H318
Aquatic Chronic2;
H411
For explanation of abbreviations see section 16.
SECTION 4: First aid measures
4.1 Description of first aid measures

Protection of first-aiders : When administering first aid, ensure that you are wearing the
appropriate personal protective equipment according to the
incident, injury and surroundings.
If inhaled : No treatment necessary under normal conditions of use.

If symptoms persist, obtain medical advice.
In case of skin contact : Remove contaminated clothing. Flush exposed area with
water and follow by washing with soap if available.
If persistent irritation occurs, obtain medical attention.
In case of eye contact : Flush eye with copious quantities of water.

Remove contact lenses, if present and easy to do. Continue
rinsing.
If persistent irritation occurs, obtain medical attention.
If swallowed : In general no treatment is necessary unless large quantities

are swallowed, however, get medical advice.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms : Oil acne/folliculitis signs and symptoms may include formation
of black pustules and spots on the skin of exposed areas.
Ingestion may result in nausea, vomiting and/or diarrhoea.
4.3 Indication of any immediate medical attention and special treatment needed
Treatment : Notes to doctor/physician:
Treat symptomatically.
3 / 19 800010031239
BE
SAFETY DATA SHEET
SECTION 5: Firefighting measures
5.1 Extinguishing media

Suitable extinguishing media : Foam, water spray or fog. Dry chemical powder, carbon
dioxide, sand or earth may be used for small fires only.
Unsuitable extinguishing : Do not use water in a jet.
media
5.2 Special hazards arising from the substance or mixture
Specific hazards during : Hazardous combustion products may include: A complex
firefighting mixture of airborne solid and liquid particulates and gases
(smoke). Carbon monoxide may be evolved if incomplete
combustion occurs. Unidentified organic and inorganic
compounds.
5.3 Advice for firefighters
Special protective equipment : Proper protective equipment including chemical resistant
for firefighters gloves are to be worn; chemical resistant suit is indicated if
large contact with spilled product is expected. Self-Contained
Breathing Apparatus must be worn when approaching a fire in
a confined space. Select fire fighter's clothing approved to
relevant Standards (e.g. Europe: EN469).
Specific extinguishing : Use extinguishing measures that are appropriate to local
methods circumstances and the surrounding environment.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures

Personal precautions : 6.1.1 For non emergency personnel:
Avoid contact with skin and eyes.
6.1.2 For emergency responders:
Avoid contact with skin and eyes.
6.2 Environmental precautions

Environmental precautions : Use appropriate containment to avoid environmental
contamination. Prevent from spreading or entering drains,
ditches or rivers by using sand, earth, or other appropriate
barriers.
Local authorities should be advised if significant spillages

cannot be contained.
6.3 Methods and materials for containment and cleaning up
4 / 19 800010031239
BE
SAFETY DATA SHEET
Methods for cleaning up : Slippery when spilt. Avoid accidents, clean up immediately.
Prevent from spreading by making a barrier with sand, earth
or other containment material.
Reclaim liquid directly or in an absorbent.
Soak up residue with an absorbent such as clay, sand or other
suitable material and dispose of properly.
6.4 Reference to other sections

For guidance on selection of personal protective equipment see Section 8 of this Safety Data Sheet.,
For guidance on disposal of spilled material see Section 13 of this Safety Data Sheet.
SECTION 7: Handling and storage
General Precautions : Use local exhaust ventilation if there is risk of inhalation of

vapours, mists or aerosols.
Use the information in this data sheet as input to a risk
assessment of local circumstances to help determine
appropriate controls for safe handling, storage and disposal of
this material.
7.1 Precautions for safe handling

Advice on safe handling : Avoid prolonged or repeated contact with skin.
Avoid inhaling vapour and/or mists.
When handling product in drums, safety footwear should be
worn and proper handling equipment should be used.
Properly dispose of any contaminated rags or cleaning
materials in order to prevent fires.
Product Transfer : Proper grounding and bonding procedures should be used

during all bulk transfer operations to avoid static accumulation.
7.2 Conditions for safe storage, including any incompatibilities

Other data : Keep container tightly closed and in a cool, well-ventilated
place. Use properly labeled and closable containers.
Store at ambient temperature.
Refer to section 15 for any additional specific legislation

covering the packaging and storage of this product.
Packaging material : Suitable material: For containers or container linings, use mild
steel or high density polyethylene.
Unsuitable material: PVC.
Container Advice : Polyethylene containers should not be exposed to high

temperatures because of possible risk of distortion.
7.3 Specific end use(s)

Specific use(s) : Not applicable
5 / 19 800010031239
BE
SAFETY DATA SHEET
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure Limits
Value type (Form

Components CAS-No. Control parameters Basis
of exposure)
Oil mist, mineral TLV 8 hr (Mist) 5 mg/m3 BE OEL
Oil mist, mineral TLV 15 min (Mist) 10 mg/m3 BE OEL
Oil mist, mineral TWA (inhalable 5 mg/m3 US. ACGIH

fraction) Threshold
Limit Values
Biological occupational exposure limits

No biological limit allocated.
Monitoring Methods
Monitoring of the concentration of substances in the breathing zone of workers or in the general
workplace may be required to confirm compliance with an OEL and adequacy of exposure controls.
For some substances biological monitoring may also be appropriate.
Validated exposure measurement methods should be applied by a competent person and samples
analysed by an accredited laboratory.
Examples of sources of recommended exposure measurement methods are given below or contact
the supplier. Further national methods may be available.
National Institute of Occupational Safety and Health (NIOSH), USA: Manual of Analytical Methods
http://www.cdc.gov/niosh/
Occupational Safety and Health Administration (OSHA), USA: Sampling and Analytical Methods
http://www.osha.gov/
Health and Safety Executive (HSE), UK: Methods for the Determination of Hazardous Substances
http://www.hse.gov.uk/
Institut für Arbeitsschutz Deutschen Gesetzlichen Unfallversicherung (IFA) , Germany
http://www.dguv.de/inhalt/index.jsp
L'Institut National de Recherche et de Securité, (INRS), France http://www.inrs.fr/accueil
8.2 Exposure controls

Engineering measuresThe level of protection and types of controls necessary will vary depending
upon potential exposure conditions. Select controls based on a risk assessment of local
circumstances. Appropriate measures include:
Adequate ventilation to control airborne concentrations.
Where material is heated, sprayed or mist formed, there is greater potential for airborne
concentrations to be generated.
General Information:
Define procedures for safe handling and maintenance of controls.
6 / 19 800010031239
BE
SAFETY DATA SHEET
Educate and train workers in the hazards and control measures relevant to normal activities
associated with this product.
Ensure appropriate selection, testing and maintenance of equipment used to control exposure, e.g.
personal protective equipment, local exhaust ventilation.
Drain down system prior to equipment break-in or maintenance.
Retain drain downs in sealed storage pending disposal or subsequent recycle.
Always observe good personal hygiene measures, such as washing hands after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment
to remove contaminants. Discard contaminated clothing and footwear that cannot be cleaned.
Practice good housekeeping.
Personal protective equipment
The provided information is made in consideration of the PPE directive (Council Directive
89/686/EEC) and the CEN European Committee for Standardisation (CEN) standards.
Personal protective equipment (PPE) should meet recommended national standards. Check with
PPE suppliers.
Eye protection : If material is handled such that it could be splashed into eyes,
protective eyewear is recommended.
Approved to EU Standard EN166.
Hand protection
Remarks : Where hand contact with the product may occur the use of
gloves approved to relevant standards (e.g. Europe: EN374,
US: F739) made from the following materials may provide
suitable chemical protection. PVC, neoprene or nitrile rubber
gloves Suitability and durability of a glove is dependent on
usage, e.g. frequency and duration of contact, chemical
resistance of glove material, dexterity. Always seek advice
from glove suppliers. Contaminated gloves should be
replaced. Personal hygiene is a key element of effective hand
care. Gloves must only be worn on clean hands. After using
gloves, hands should be washed and dried thoroughly.
Application of a non-perfumed moisturizer is recommended.
For continuous contact we recommend gloves with

breakthrough time of more than 240 minutes with preference
for > 480 minutes where suitable gloves can be identified. For
short-term/splash protection we recommend the same but
recognize that suitable gloves offering this level of protection
may not be available and in this case a lower breakthrough
time maybe acceptable so long as appropriate maintenance
and replacement regimes are followed. Glove thickness is not
a good predictor of glove resistance to a chemical as it is
dependent on the exact composition of the glove material.
Glove thickness should be typically greater than 0.35 mm
depending on the glove make and model.
Skin and body protection : Skin protection is not ordinarily required beyond standard
7 / 19 800010031239
BE
SAFETY DATA SHEET
work clothes.
It is good practice to wear chemical resistant gloves.
Respiratory protection : No respiratory protection is ordinarily required under normal

conditions of use.
In accordance with good industrial hygiene practices,
precautions should be taken to avoid breathing of material.
If engineering controls do not maintain airborne
concentrations to a level which is adequate to protect worker
health, select respiratory protection equipment suitable for the
specific conditions of use and meeting relevant legislation.
Check with respiratory protective equipment suppliers.
Where air-filtering respirators are suitable, select an
appropriate combination of mask and filter.
Select a filter suitable for combined particulate/organic gases
and vapours [Type A/Type P boiling point > 65°C (149°F)]
meeting EN14387 and EN143.
Thermal hazards : Not applicable
Environmental exposure controls

General advice : Take appropriate measures to fulfill the requirements of
relevant environmental protection legislation. Avoid
contamination of the environment by following advice given in
Section 6. If necessary, prevent undissolved material from
being discharged to waste water. Waste water should be
treated in a municipal or industrial waste water treatment plant
before discharge to surface water.
Local guidelines on emission limits for volatile substances
must be observed for the discharge of exhaust air containing
vapour.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties

Appearance : Liquid at room temperature.
Colour : Clear amber

Odour : Data not available
Odour Threshold : Data not available
pH : Not applicable
pour point : -39 °CMethod: ASTM D97
8 / 19 800010031239
BE
SAFETY DATA SHEET
Melting / freezing point Data not available

Boiling point : Data not available
Flash point : 230 °C
Method: ASTM D92 (COC)
Evaporation rate : Data not available

Flammability (solid, gas) : Data not available
Upper explosion limit : Typical 10 %(V)
Lower explosion limit : Typical 1 %(V)
Vapour pressure : < 0,5 Pa (20 °C)

estimated value(s)
Relative vapour density : > 1estimated value(s)
Relative density : 0,873 (15 °C)
Density : 873 kg/m3 (15,0 °C)

Method: ASTM D4052
Solubility(ies)
Water solubility : negligible
Solubility in other solvents : Data not available
Partition coefficient: n- : log Pow: > 6(based on information on similar products)

octanol/water
Auto-ignition temperature : >
320 °C
Decomposition temperature : Data not available
Viscosity
Viscosity, dynamic : Data not available
Viscosity, kinematic : 14,5 mm2/s (100 °C)
Method: ASTM D445
Explosive properties : Not classified
Oxidizing properties : Data not available
9.2 Other information
9 / 19 800010031239
BE
SAFETY DATA SHEET
Conductivity : This material is not expected to be a static accumulator.
SECTION 10: Stability and reactivity
10.1 Reactivity
The product does not pose any further reactivity hazards in addition to those listed in the following
sub-paragraph.
10.2 Chemical stability
Stable.
No hazardous reaction is expected when handled and stored according to provisions
10.3 Possibility of hazardous reactions
Hazardous reactions : Reacts with strong oxidising agents.
10.4 Conditions to avoid

Conditions to avoid : Extremes of temperature and direct sunlight.
10.5 Incompatible materials

Materials to avoid : Strong oxidising agents.
10.6 Hazardous decomposition products

Hazardous decomposition : No decomposition if stored and applied as directed.
products
SECTION 11: Toxicological information

11.1 Information on toxicological effects
Basis for assessment : Information given is based on data on the components and
the toxicology of similar products.Unless indicated otherwise,
the data presented is representative of the product as a
whole, rather than for individual component(s).
Information on likely routes of : Skin and eye contact are the primary routes of exposure
exposure although exposure may occur following accidental ingestion.
Acute toxicity
Product:
Acute oral toxicity : LD50 rat: > 5.000 mg/kg
Remarks: Low toxicity:
Based on available data, the classification criteria are not met.
Acute inhalation toxicity : Remarks: Based on available data, the classification criteria
are not met.
10 / 19 800010031239
BE
SAFETY DATA SHEET
Acute dermal toxicity : LD50 Rabbit: > 5.000 mg/kg

Remarks: Low toxicity:
Skin corrosion/irritation
Product:
Remarks: Slightly irritating to skin., Prolonged or repeated skin contact without proper cleaning
can clog the pores of the skin resulting in disorders such as oil acne/folliculitis., Based on
available data, the classification criteria are not met.
Serious eye damage/eye irritation

Product:
Remarks: Slightly irritating to the eye., Based on available data, the classification criteria are not
met.
Components:
Zinc dialkyldithiophosphate:
Remarks: Based on available data, the classification criteria are not met.
Respiratory or skin sensitisation

Product:
Remarks: For respiratory and skin sensitisation:, Not a sensitiser., Based on available data, the
classification criteria are not met.
Germ cell mutagenicity

Product:
: Remarks: Non mutagenic, Based on available data, the
classification criteria are not met.
Carcinogenicity
Product:
Remarks: Not a carcinogen., Based on available data, the classification criteria are not met.
Remarks: Product contains mineral oils of types shown to be non-carcinogenic in animal skin-
painting studies., Highly refined mineral oils are not classified as carcinogenic by the
International Agency for Research on Cancer (IARC).
Material GHS/CLP Carcinogenicity Classification
11 / 19 800010031239
BE
SAFETY DATA SHEET
Highly refined mineral oil No carcinogenicity classification.

Alkylated phenol ester No carcinogenicity classification.
Reproductive toxicity
Product:
:
Remarks: Not a developmental toxicant., Does not impair
fertility., Based on available data, the classification criteria are
not met.
STOT - single exposure

Product:
STOT - repeated exposure

Product:
Aspiration toxicity
Product:
Not an aspiration hazard.
Further information
Product:
Remarks: Used oils may contain harmful impurities that have accumulated during use. The
concentration of such impurities will depend on use and they may present risks to health and the
environment on disposal., ALL used oil should be handled with caution and skin contact avoided
as far as possible.
Remarks: Continuous contact with used engine oils has caused skin cancer in animal tests.
Remarks: Slightly irritating to respiratory system.
Remarks: Classifications by other authorities under varying regulatory frameworks may exist.
Summary on evaluation of the CMR properties

Germ cell mutagenicity- : This product does not meet the criteria for classification in
Assessment categories 1A/1B.
12 / 19 800010031239
BE
SAFETY DATA SHEET
Carcinogenicity - : This product does not meet the criteria for classification in
Reproductive toxicity - : This product does not meet the criteria for classification in
SECTION 12: Ecological information
12.1 Toxicity
Basis for assessment : Ecotoxicological data have not been determined specifically
for this product.
Information given is based on a knowledge of the components
and the ecotoxicology of similar products.
Unless indicated otherwise, the data presented is
representative of the product as a whole, rather than for
individual component(s).(LL/EL/IL50 expressed as the
nominal amount of product required to prepare aqueous test
extract).
Product:
Toxicity to fish (Acute : Remarks: LL/EL/IL50 > 100 mg/l
toxicity) Practically non toxic:
Toxicity to crustacean (Acute : Remarks: LL/EL/IL50 > 100 mg/l

toxicity) Practically non toxic:
Toxicity to algae/aquatic : Remarks: LL/EL/IL50 > 100 mg/l

plants (Acute toxicity) Practically non toxic:
Toxicity to fish (Chronic : Remarks: Data not available

toxicity)
Toxicity to crustacean : Remarks: Data not available
(Chronic toxicity)
Toxicity to microorganisms :
(Acute toxicity) Remarks: Data not available
12.2 Persistence and degradability

Product:
Biodegradability : Remarks: Not readily biodegradable., Major constituents are
inherently biodegradable, but contains components that may
persist in the environment., Persistent per IMO criteria.,
13 / 19 800010031239
BE
SAFETY DATA SHEET
International Oil Pollution Compensation (IOPC) Fund

definition: “A non-persistent oil is oil, which, at the time of
shipment, consists of hydrocarbon fractions, (a) at least 50%
of which, by volume, distills at a temperature of 340ºC (645ºF)
and (b) at least 95% of which, by volume, distils at a
temperature of 370ºC (700ºF) when tested by the ASTM
Method D-86/78 or any subsequent revision thereof."
12.3 Bioaccumulative potential

Product:
Bioaccumulation : Remarks: Contains components with the potential to
bioaccumulate.
Partition coefficient: n- : log Pow: > 6Remarks: (based on information on similar

octanol/water products)
12.4 Mobility in soil
Product:
Mobility : Remarks: Liquid under most environmental conditions., If it
enters soil, it will adsorb to soil particles and will not be
mobile.
Remarks: Floats on water.
12.5 Results of PBT and vPvB assessment
Product:
Assessment : This mixture does not contain any REACH registered
substances that are assessed to be a PBT or a vPvB.
12.6 Other adverse effects
Product:
Additional ecological : Does not have ozone depletion potential, photochemical
information ozone creation potential or global warming potential., Product
is a mixture of non-volatile components, which will not be
released to air in any significant quantities under normal
conditions of use.
Poorly soluble mixture., Causes physical fouling of aquatic
organisms.
Mineral oil does not cause chronic toxicity to aquatic
organisms at concentrations less than 1 mg/l.
SECTION 13: Disposal considerations
13.1 Waste treatment methods

Product : Recover or recycle if possible.
It is the responsibility of the waste generator to determine the
toxicity and physical properties of the material generated to
determine the proper waste classification and disposal
14 / 19 800010031239
BE
SAFETY DATA SHEET
methods in compliance with applicable regulations.

Waste product should not be allowed to contaminate soil or
ground water, or be disposed of into the environment.
Do not dispose into the environment, in drains or in water
courses
Do not dispose of tank water bottoms by allowing them to
drain into the ground. This will result in soil and groundwater
contamination.
Waste arising from a spillage or tank cleaning should be
disposed of in accordance with prevailing regulations,
preferably to a recognised collector or contractor. The
competence of the collector or contractor should be
established beforehand.
MARPOL - see International Convention for the Prevention of

Pollution from Ships (MARPOL 73/78) which provides
technical aspects at controlling pollutions from ships.
Contaminated packaging : Dispose in accordance with prevailing regulations, preferably

to a recognized collector or contractor. The competence of
the collector or contractor should be established beforehand.
Disposal should be in accordance with applicable regional,
national, and local laws and regulations.
Local legislation
Waste catalogue :
EU Waste Disposal Code (EWC):
Waste Code :
13 02 05*
Remarks : Disposal should be in accordance with applicable regional,

national, and local laws and regulations.
Classification of waste is always the responsibility of the end

user.
SECTION 14: Transport information
14.1 UN number
ADN : Not regulated as a dangerous good
ADR : Not regulated as a dangerous good
RID : Not regulated as a dangerous good
IMDG : Not regulated as a dangerous good
IATA : Not regulated as a dangerous good
14.2 Proper shipping name
15 / 19 800010031239
BE
SAFETY DATA SHEET

14.3 Transport hazard class
14.4 Packing group
CDNI Inland Water Waste : NST 3411 Engine oil
Agreement
14.5 Environmental hazards
14.6 Special precautions for user
Remarks : Special Precautions: Refer to Section 7, Handling & Storage,
for special precautions which a user needs to be aware of or
needs to comply with in connection with transport.
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied. MARPOL Annex 1 rules apply for bulk shipments by sea.
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
REACH - List of substances subject to authorisation : Product is not subject to
(Annex XIV) Authorisation under REACH.
REACH - Candidate List of Substances of Very High : This product does not contain
Concern for Authorisation (Article 59). substances of very high concern
(Regulation (EC) No
1907/2006 (REACH), Article 57).
Volatile organic compounds : 0%
16 / 19 800010031239
BE
SAFETY DATA SHEET
Other regulations : The regulatory information is not intended to be

comprehensive. Other regulations may apply to this material.
Regulation (EC) No 1907/2006 of the European Parliament

and of the Council of 18 December 2006 concerning the
Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH), annex XIV.
Regulation (EC) No 1907/2006 of the European Parliament
and of the Council of 18 December 2006 concerning the
Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH), annex XVII.
Directive 2004/37/EC on the protection of workers from the
risks related to exposure to carcinogens or mutagens at work
and its amendments.
Directive 1994/33/EC on the protection of young people at
work and its amendments.
Council Directive 92/85/EEC on the introduction of measures
to encourage improvements in the safety and health at work of
pregnant workers and workers who have recently given birth
or are breastfeeding and its amendments.
The components of this product are reported in the following inventories:

EINECS : All components listed or polymer exempt.
TSCA : All components listed.
15.2 Chemical safety assessment

No Chemical Safety Assessment has been carried out for this substance/mixture by the supplier.
SECTION 16: Other information

,
Full text of H-Statements

H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
H413 May cause long lasting harmful effects to aquatic life.
Full text of other abbreviations

Aquatic Chronic Long-term (chronic) aquatic hazard
Asp. Tox. Aspiration hazard
Eye Dam. Serious eye damage
Skin Irrit. Skin irritation
Abbreviations and Acronyms : The standard abbreviations and acronyms used in this
document can be looked up in reference literature (e.g.
scientific dictionaries) and/or websites.
17 / 19 800010031239
BE
SAFETY DATA SHEET
ACGIH = American Conference of Governmental Industrial

Hygienists
ADR = European Agreement concerning the International
Carriage of Dangerous Goods by Road
AICS = Australian Inventory of Chemical Substances
ASTM = American Society for Testing and Materials
BEL = Biological exposure limits
BTEX = Benzene, Toluene, Ethylbenzene, Xylenes
CAS = Chemical Abstracts Service
CEFIC = European Chemical Industry Council
CLP = Classification Packaging and Labelling
COC = Cleveland Open-Cup
DIN = Deutsches Institut fur Normung
DMEL = Derived Minimal Effect Level
DNEL = Derived No Effect Level
DSL = Canada Domestic Substance List
EC = European Commission
EC50 = Effective Concentration fifty
ECETOC = European Center on Ecotoxicology and
Toxicology Of Chemicals
ECHA = European Chemicals Agency
EINECS = The European Inventory of Existing Commercial
Chemical Substances
EL50 = Effective Loading fifty
ENCS = Japanese Existing and New Chemical Substances
Inventory
EWC = European Waste Code
GHS = Globally Harmonised System of Classification and
Labelling of Chemicals
IARC = International Agency for Research on Cancer
IATA = International Air Transport Association
IC50 = Inhibitory Concentration fifty
IL50 = Inhibitory Level fifty
IMDG = International Maritime Dangerous Goods
INV = Chinese Chemicals Inventory
IP346 = Institute of Petroleum test method N° 346 for the
determination of polycyclic aromatics DMSO-extractables
KECI = Korea Existing Chemicals Inventory
LC50 = Lethal Concentration fifty
LD50 = Lethal Dose fifty per cent.
LL/EL/IL = Lethal Loading/Effective Loading/Inhibitory loading
LL50 = Lethal Loading fifty
MARPOL = International Convention for the Prevention of
Pollution From Ships
NOEC/NOEL = No Observed Effect Concentration / No
Observed Effect Level
OE_HPV = Occupational Exposure - High Production Volume
PBT = Persistent, Bioaccumulative and Toxic
PICCS = Philippine Inventory of Chemicals and Chemical
Substances
PNEC = Predicted No Effect Concentration
REACH = Registration Evaluation And Authorisation Of
Chemicals
18 / 19 800010031239
BE
SAFETY DATA SHEET
RID = Regulations Relating to International Carriage of

Dangerous Goods by Rail
SKIN_DES = Skin Designation
STEL = Short term exposure limit
TRA = Targeted Risk Assessment
TSCA = US Toxic Substances Control Act
TWA = Time-Weighted Average
vPvB = very Persistent and very Bioaccumulative
Further information
Training advice :
Provide adequate information, instruction and training for

operators.
Other information : No Exposure Scenario annex is attached to this safety data

sheet. It is a non-classified mixture containing hazardous
substances as detailed in Section 3; relevant information from
Exposure Scenarios for the hazardous substances contained
have been integrated into the core sections 1-16 of this SDS.
A vertical bar (|) in the left margin indicates an amendment

from the previous version.
Sources of key data used to :

compile the Safety Data
Sheet
The quoted data are from, but not limited to, one or more
sources of information (e.g. toxicological data from Shell
Health Services, material suppliers’ data, CONCAWE, EU
IUCLID date base, EC 1272 regulation, etc).
This information is based on our current knowledge and is intended to describe the product for the
purposes of health, safety and environmental requirements only. It should not therefore be
construed as guaranteeing any specific property of the product.
19 / 19 800010031239
BE

Komatsu Eo 15W040 LC CK-4 - 2021

Uploaded by

Copyright:

Available Formats

Komatsu Eo 15W040 LC CK-4 - 2021

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Komatsu Eo 15W040 LC CK-4 - 2021

Uploaded by

Copyright:

Available Formats

What is the product being described in the document?

What is the product being described in the document?

What hazards are associated with the product?

What hazards are associated with the product?

SAFETY DATA SHEET

According to EC No 1907/2006 as amended as at the date of this SDS

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

1.3 Details of the supplier of the safety data sheet

1.4 Emergency telephone number

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Labelling (REGULATION (EC) No 1272/2008)

Signal word : No signal word

Hazard statements : PHYSICAL HAZARDS:

Precautionary statements : Prevention:

Safety data sheet available on request.

2.3 Other hazards

SECTION 3: Composition/information on ingredients

: * contains one or more of the following CAS-numbers

Alkylated phenol ester 125643-61-0 Aquatic Chronic4; 1- 3

Zinc 93819-94-4 Skin Irrit.2; H315 1 - 2,4

SECTION 4: First aid measures

4.1 Description of first aid measures

If inhaled : No treatment necessary under normal conditions of use.

In case of eye contact : Flush eye with copious quantities of water.

If swallowed : In general no treatment is necessary unless large quantities

SECTION 5: Firefighting measures

5.1 Extinguishing media

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

6.2 Environmental precautions

Local authorities should be advised if significant spillages

6.3 Methods and materials for containment and cleaning up

6.4 Reference to other sections

SECTION 7: Handling and storage

General Precautions : Use local exhaust ventilation if there is risk of inhalation of

7.1 Precautions for safe handling

Product Transfer : Proper grounding and bonding procedures should be used

7.2 Conditions for safe storage, including any incompatibilities

Store at ambient temperature.

Refer to section 15 for any additional specific legislation

Container Advice : Polyethylene containers should not be exposed to high

7.3 Specific end use(s)

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure Limits

Value type (Form

Oil mist, mineral TLV 15 min (Mist) 10 mg/m3 BE OEL

Oil mist, mineral TWA (inhalable 5 mg/m3 US. ACGIH

Biological occupational exposure limits

8.2 Exposure controls

For continuous contact we recommend gloves with

Respiratory protection : No respiratory protection is ordinarily required under normal

Thermal hazards : Not applicable

Environmental exposure controls

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

Colour : Clear amber