Ordering number : ENA0944 2SK596S

SANYO Semiconductors
DATA SHEET
N-channel Silicon Juncton FET

2SK596S Electret Condenser Microphone

Applications
Features
• Low output noise voltage : VNO=--110dB max (VCC=4.5V, RL=1kΩ, Cin=15pF, VIN=0V, A curve)
• Especiallysuited for use in condenser microphone for audio equipments and telephones
• Excellent transient characteristic
• Adoption of FBET process

Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Gate-to-Drain Voltage VGDO --20 V
Gate Current IG 10 mA
Drain Current ID 1 mA
Allowable Power Dissipation PD 100 mW
Junction Temperature Tj 150 °C
Storage Temperature Tstg --55 to +150 °C

Package Dimensions Product & Package Information

unit : mm (typ) • Package : SPA
7524-005 • JEITA, JEDEC : SC-72
• Minimum Packing Quantity : 500 pcs./bag
4.0 2.2 2SK596S-A
2SK596S-B Marking Electrical Connection
3.0

3
596S
1.8

Rank

0.4 LOT No.

0.5
2
0.6

0.4 0.4
15.0

1
1 2 3

1.3 1.3
1 : Source
0.7

0.7

2 : Gate
3 : Drain
3.0
3.8 SANYO : SPA

http://semicon.sanyo.com/en/network
51612GB TKIM TC-00002756 No. A0944-1/7
 2SK596S

Electrical Characteristics at Ta=25°C

Ratings
Parameter Symbol Conditions Unit
Rank min typ max
Gate-to-Drain Breakdown Voltage V(BR)GDO IG=--100μA --20 V
Cutoff Voltage VGS(off) VDS=5V, ID=1μA --0.4 --1.5 V
A 100 170
Drain Current IDSS* VDS=5V, VGS=0V μA
B 150 240
Forward Transfer Admittance | yfs | VDS=5V, VGS=0V, f=1kHz 0.4 0.8 mS
Input Capacitance Ciss VDS=5V, VGS=0V, f=1MHz 4.1 pF
Reverse Transfer Capacitance Crss VDS=5V, VGS=0V, f=1MHz 0.88 pF
[Ta=25°C, VCC=4.5V, RL=1kΩ, Cin=15pF, See specified Test Circuit.]
A --5.0
Voltage Gain GV VIN=10mV, f=1kHz dB
B --3.8
A --0.84 --1.8
Reduced Voltage Characteristic ΔGVV VIN=10mV, f=1kHz, VCC=4.5V → 1.5V dB
B --0.90 --2.0
Frequency Characteristic ΔGvf f=1kHz → 110Hz --1.0 dB
A 2.0
Total Harmonic Distortion THD VIN=30mV, f=1kHz %
B 1.6
Output Noise Voltage VNO VIN=0V, A curve --110 dB

* : The 2SK596S is classified by IDSS as follows : (unit : μA)

Rank A B
IDSS 100 to 170 150 to 240

Test Circuit
Voltage Gain
Frequency Characteristic
Harmonic Distortion
Reduced Voltage Characteristic
1kΩ VCC=4.5V
VCC=1.5V

15pF 33μF
+

VTVM V THD
OSC

Ordering Information
Device Package Shipping memo
2SK596S-A SPA 500pcs./bag
Pb Free
2SK596S-B SPA 500pcs./bag

No. A0944-2/7
 2SK596S

ID -- VDS ID -- VGS
200 300
VGS=0V VDS=5V
180
250
160
Drain Current, ID -- μA

Drain Current, ID -- μA
140
200
120
--0.1V
100 150

80
μA
100 2 40
60 = μA
--0.2V SS
1 70
I D A
40
0μ
50 10
20 --0.4V --0.3V
0 0
0 2 4 6 8 10 --0.5 --0.4 --0.3 --0.2 --0.1 0
Drain-to-Source Voltage, VDS -- V IT16804 Gate-to-Source Voltage, VGS -- V IT16805
ID -- VGS | yfs | -- IDSS
300 1.0
VDS=5V VDS=5V

Forward Transfer Admittance, | yfs | -- mS

0.95 VGS=0V
250 f=1kHz
0.9
Drain Current, ID -- μA

200
0.85

150 0.8

0.75
100 C
5°
=7 °C 0.7
Ta
25
50 °C
--25 0.65

0 0.6
--0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 80 100 120 140 160 180 200 220 240 260
Gate-to-Source Voltage, VGS -- V IT16806 Drain Current, IDSS -- μA IT16807
VGS(off) -- IDSS Ciss -- VDS
0.6 2
VDS=5V VGS=0V
0.55 ID=1μA f=1MHz
Cutoff Voltage, VGS(off) -- V

Input Capacitance, Ciss -- pF

0.5 10

7
0.45

5
0.4

0.35 3

0.3
2

0.25

0.2 1.0
80 100 120 140 160 180 200 220 240 260 7 1.0 2 3 5 7 10 2 3
Drain Current, IDSS -- μA IT16808 Drain-to-Source Voltage, VDS -- V ITR01788
Crss -- VDS GV -- IDSS
5 --2.0
VGS=0V GV : VCC=4.5V
Reverse Transfer Capacitance, Crss -- pF

3
f=1MHz --2.5 VIN=10mV
--3.0 Cin=15pF
2 RL=1kΩ
Voltage Gain, GV -- dB

--3.5 f=1kHz
IDSS : VDS=5.0V
1.0 --4.0
7 --4.5
5 --5.0

3
--5.5
--6.0
2
--6.5
0.1 --7.0
7 1.0 2 3 5 7 10 2 3 80 100 120 140 160 180 200 220 240 260
Drain-to-Source Voltage, VDS -- V ITR01789 Drain Current, IDSS -- μA IT16809

No. A0944-3/7
 2SK596S

ΔGVV -- IDSS THD -- IDSS

Reduced Voltage Characteristic, ΔGVV -- dB --0.7 3.0
ΔGVV :VCC=4.5V→1.5V THD : VCC=4.5V
VIN=10mV 2.8 VIN=30mV

Total Harmonic Distortion, THD -- %

--0.75
Cin=15pF 2.6
Cin=15pF
--0.8 RL=1kΩ RL=1kΩ
f=1kHz 2.4 f=1kHz
--0.85 IDSS : VDS=5.0V IDSS : VDS=5.0V
2.2

--0.9 2.0

1.8
--0.95
1.6
--1.0
1.4

--1.05 1.2

--1.1 1.0
80 100 120 140 160 180 200 220 240 260 80 100 120 140 160 180 200 220 240 260
Drain Current, IDSS -- μA IT16810 Drain Current, IDSS -- μA IT16811
THD -- VIN PD -- Ta
100 120
7 THD : VCC=4.5V

Allowable Power Dissipation, PD -- mW

5 Cin=15pF
Total Harmonic Distortion, THD -- %

3 RL=1kΩ 100
2 f=1kHz μA
A 170
10
IDSS : VDS=5.0V =100μ
I DSS 80
7
5
240μA
3 60
2

1.0 40
7
5
3 20
2

0.1 0
0 40 80 120 160 200 240 0 20 40 60 80 100 120 140 160
Input Voltage, VIN -- mV IT16812 Ambient Temperature, Ta -- °C IT16813

No. A0944-4/7
 2SK596S

Bag Packing Specification

2SK596S-A, 2SK596S-B

No. A0944-5/7
 2SK596S

Outline Drawing
2SK596S-A, 2SK596S-B
Mass (g) Unit
0.13 mm
* For reference

No. A0944-6/7
 2SK596S

Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.

This catalog provides information as of May, 2012. Specifications and information herein are subject
to change without notice.

PS No. A0944-7/7