DC580 Numerically Controlled DC Boost

and Buck Adjustable Power Supply

Product Manual

July 25, 2020

Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

深圳市菲尼瑞斯科技有限公司
 深圳市菲尼瑞斯科技有限公司

Table of Contents
1 product description ..................................................................................................... 1

2 Parameter Description .................................................................................................1

2.1 Basic parameters........................................................................................................................... 1
2.2 Protection mechanism parameters.......................................................................................... 1

3 Function introduction .................................................................................................2

3.1 Interface display diagram........................................................................................................... 2
3.2 Parameter setting description...................................................................................................3
3.2.1 System settings................................................................................................................. 3
3.2.2 Software protection settings........................................................................................ 3
3.3 Intelligent temperature control system..................................................................................4

4 Key Description .............................................................................................................. 4

5 Upper computer Software introduction（ Suitable for DC580 V1.1 version）

.................................................................................................................................................... 5
5.1 Firmware upgrade......................................................................................................................... 6
5.2 Control operation..........................................................................................................................6

I
 深圳市菲尼瑞斯科技有限公司

1 product description

DC-580 digital controlled step-up and step-down adjustable power supply is

small in size, powerful in function, stable in performance, high in precision, and

contains a variety of humanized system settings. Adopting 1.44-inch LCD

high-definition display, one screen displays a variety of data, the page is simple

and rich.

2 Parameter Description

2.1 Basic parameters

1. Input voltage：8V-32V（ Note: The lower the input voltage, the smaller

the maximum output power）；

2. The output voltage： 1.8-32V；

3. Output current： 0-5A；

4. Output Power：0-80W（ Note: When running at full load, ensure that the input

voltage is greater than 15V and the power is greater than 100W）；

5. Voltage resolution： 0.01V；

6. Current resolution： 0.001A；

2.2 Protection mechanism parameters

1. Input anti-reverse connection, output anti-short connection and

anti-backflow, can charge the battery (distinguish positive and

negative)

1
 深圳市菲尼瑞斯科技有限公司

2. Output overvoltage protection (OVP): 1.8V-35V custom adjustment,

default 35V;

3. Output overcurrent protection (OCP): 0-5A custom adjustment,

default 5A;

4. Output over power protection (OPP): 0-80W custom adjustment, default

80W;

5. Output over temperature protection (OTP): 45-120 ℃ self-defined

adjustment, closed by default;

6. Output overtime protection (OHP): 0-100h custom adjustment, closed

by default;

7. Power-on default (ACQ): Closed by default

3 Function introduction

3.1 Interface display diagram

2
 深圳市菲尼瑞斯科技有限公司

3.2 Parameter setting description

3.2.1 System settings

1. Default Switch： Set the power-on device to turn on or turn off the output by

default;

2. Language： Set English and Chinese switching;

3. Brightness： Support display brightness adjustment;

4. Direction： Set the direction of four-way rotation;

5. Temp Unit： Set the temperature unit (℃ or ℉ ).

3.2.2 Software protection settings

During the operation of the equipment, once the software protection

mechanism is triggered, the output of the equipment is disconnected and the

buzzer will beep for a long time, and the corresponding mechanism code will be

3
 深圳市菲尼瑞斯科技有限公司

alarmed. Press the switch key and the knob again to release the alarm and return

to the normal state.

1. Over Voltage ： Set the threshold voltage, and alarm OVP when the output

voltage exceeds the set voltage;

2. Over Current ： Set the threshold current, and alarm OCP when the output

current exceeds the set current;

3. Over Power：Set the threshold power, and alarm OPP when the output power

exceeds the set power;

4. Over Temp ： Set the threshold temperature, and alarm OTP when the device

temperature exceeds the set temperature

5. Timeout：Set the threshold time, when the output time exceeds the set time,

it will alarm OHP;

3.3 Intelligent temperature control system

When the product temperature is greater than 45° C or the output current is

greater than 1A, the fan will automatically start, and the fan will automatically

turn off when the conditions are not met.

4 Key Description

4
 深圳市菲尼瑞斯科技有限公司

5 Upper computer Software introduction（Suitable for

DC580 V1.1 version）

After the DC580 is powered on, connect to the computer through the serial

5
 深圳市菲尼瑞斯科技有限公司

port module, select the corresponding serial port number (if you find the serial

port number, please check whether the computer is installed with the CH340

driver), and then open the serial port, click Connect device, the message window

will prompt whether the connection is successful, the connection is successful

The corresponding product model will be updated in the lower left corner of the

back page.

5.1 Firmware upgrade

After turning on the Upper computer to connect to the device, select the

correct latest device firmware file and data packet length (optional) to perform

the firmware upgrade operation. Please do not power off the device during the

upgrade process to avoid the failure of the upgrade and cause the device to crash.

If the upgrade fails, please disconnect the power supply and press and hold the

coding button to power on the device, try to re-enter the upgrade mode, and turn

on the upper computer again to upgrade the firmware. After the firmware

upgrade is successful, the device will automatically run the latest firmware, and

the Upper computer software will restart.

5.2 Control operation

First, you must open the correct serial port number before connecting the

device button to take effect. When operating the upper computer, all control

input boxes cannot be empty, and only numbers and decimal points can be input

(decimal points can only be input in specific positions to take effect, such as

voltage 10.00 , Current 3.000, power 080.0), the setting will take effect after the

cursor leaves the input box.

You can observe the waveform status light to determine whether the

6
 深圳市菲尼瑞斯科技有限公司

waveform status is acquired in real time (green represents acquiring data

waveform, red represents data waveform acquisition pause), and the waveform

status light can be controlled by the start/pause next to the waveform. The

waveform can also be zoomed in by selecting the specified area with the left

mouse button to view the waveform more intuitively. If you want to analyze the

data for a period of time, click the save button next to the waveform, and the

DC-Date.xlsx file will be automatically generated on the desktop and open the file

Just perform data analysis.