Shelving Systems English

Shelving Systems
Stationary - Dynamic Racks Automated Storage

Systems
Effective storage and safety

Front racks
Pallet racks(frontal type) are designed for storage
pallet-fired goods and are a rational solution
a large range and a fast turnover. Palllet racks
simple enough and flexible solution, they're at 40
the capacity of the warehouse, while providingfree access to any
Well, at every moment of time.
Typical configuration of pallet shelving. 5 tiers high on 2 m, the weight of the

pallet 1000 kg, the width of the passage 2.8 m.
The system of pallet shelving consists of vertical racks (frames) and horizontal beams
(traverse), from which shelving seconds are formed. The shelves are assembled in one
or more rows of any length with an in-size number of storage tiers.
и The traverse allows you to bring the geometry of the racking sea to any storage
space as close as possible. The frames of shelving in the places of passage of loading
equipment are protected by special jacks.
To organize a zone of selection of piece goods on the lowertiers of Stella ya can

organize a solid shelf of DSP or metal.
advantages
Low cost compared to other pallet storage systems
Short delivery time, the possibility of makingnon-ndart sizes;
Use almost any loading technique to handle pallets;
The possibility of transformation into shelves or multi-storey
structures;
Access to any pallet at any given time. Guarantee - from 2
Technicalspecifications
It is possible to paint the shelving in a non-standard color.
The height of the rack 2,0
Length of section 1,8
Depth of the section 0,5
Load on storage tier up to 6 000 kg
Load on the section up to 40,000 kg
Step rearranging tiers 50mm
Coverage type powder enamel, zinc
blue (RAL 5005, 5015),

Standard colours
Orange (RAL 2004)
With the use of narrow-passing equipment, the capacity of pallet racks

increases significantly.
2 WWW.TOOLS.TOV-VAP.COM.UA 3
Drive Racks (drive)
Entry racks are designed to store large volumes of one
type pallets, allow you to make the most of the useful area
Warehouse (up to 70
Roomy. This is achieved by excluding work aisles for loading
appliances.
The entrance to the sewer channel is protected by jacks

with guides all over the depth.
The inbound shelving system provides a safe block of bling products that are too
fragile or unsuitable for stacking one on top of the other. They are ideal for storing
goods with low turnover rates and long shelf life.
Processing of cargo in the entrance racks is carried out on two principles of tsips: "LIFO" Separately standing block of the entry rack for processing cargo on
the principle of "FIFO."
and"FIFO". "FIFO" involves downloading
и unloading products from opposite sides, that is, pallets placed on the rack first,
will be unloaded too first.
advantages
Convenience in dealing with large volumes of similar cargoes;
more efficient than front pallet racks use of a useful warehouse area (up to
80%);
The ability to store EUR pallets (1200 x800 mm), FIN (1200 x1000 mm) and
others with the same length; Guarantee - from 2
Specifications
The height of the rack Up to12m
Canal width 1,35
Channel depth Up to18m
Масса паллеты up to 2 000 kg
blue (RAL 5005, 5015),

Standard colours
Orange (RAL 2004)
Loading/unloading racks can be done by a loader or a stacker.
Shelves
These stele racks are used to store various types of sedition on shelves (boxes, boxes,
containers, piece goods).
Presented type of shelving - one of the most sought-after.
Smart shelving is made in galvanization or covered with

powder enamel.
В depending on the load on the shelf, racks of this type are made of elements of
different configurations and thickness of metal. The most expensiveracks can
withstand up to 80 kg per shelf, the most durable structures of up to 1250 kg.
Constructor racks. Maximum load on the rack tier
advantages
Low cost
Short delivery time
ergonomics and aesthetic appearance;
A wide range of sizes and trims;
Convenience of installation and operation
guarantee - from 12 months.
Specifications
The height of the rack 2,0
Shelf length 0,6 Racks with LS trays. Thanks to the special grooves in the rack, individual
sections can besoy dined among themselves.
Depth of the shelf 0,3
Load on the shelf 80
Step rearranging tiers 38/50mm
The type of shelves CPD, galvanized or dyed metal
Standard colours blue, gray, orange
Smart shelf protection
Lightweight Mezzanine
The floor structure of the shelving is designed for the shelf storage of different types of
products with the organization on certain high-level floors of the floor (floors).
The floor structure is based on the Mega shelves with

overlappingm from MDF.
Access to people's overlap is provided through stairs or

ramps of the customer's desires. Loads can be weighed
mother using a forklift, lift, lift table, etc.
Safety railings around the perimeter of the mezzanine designare over but protect
staff from accidental fall.
В high-strength MDF wood slabs or metal galvanized bars capable of holding loads of
Mezzanine on the basis of "easythem" shelves with
up to 300 kg per 1 m sq. m. can be used as an overlap. galvanized lattice flooring.
advantages
The most efficient storage of products that require manual
processing in warehouses with high ceiling height (up to 12
meters);
Develop a unique design for eachKli
A wide range of material for shelves and overlapping; The
ability to integrate the lighting system
в aisles between the racks;
Guarantee - from 2
Specifications The overlap is placed on special longitudinal

and cross beams.
The height of the rack up to 6.5 m
Length of section Up to 3m
Depth of the section up to 1.5 m
Load on storage tier up to 1000 kg
The width of the work corridor from 0,8 to 1,5 m
Number of floors 2 to 3
Load on 1 sq m overlap up to 300 kg
Load on 1 sq m
up to 500 kg
shelf storage
MDF, lattice
Overlap type
galvanized metal
The type of shelves DSP, MDF, OSB, metal
Standard colours blue (RAL 5005, 5015), Inter-tiered movement is carried out
оранжевый (RAL 2004) thanks to stairs or sloping ramps.
Enhanced mezzanine
Enhanced mezzanine is a system of shelving with inter-tiered work-chimy platforms,
designed to store and conveniently handle manual and pallet cargo of medium
and above average load.
A wide variety of options allow you to create a uniqueand

more efficient design for each customer.
Enhanced mezzanine is designed both on the basis of pallet and on the basis of
shelves (using frames of a more complex profile). Floor - 2 floors and above.
This storage system is designedfor cargo with higher mas, it is possible, thanks to the
use of massive profiles.
Metal mezzanine can withstand more than 10 tons of

weight.
advantages
Enhanced mezzanine can withstand more than 10 tons of weight;
Develop a unique design for each customer
A wide range of material forlok and overlap; The ability to
integrate the lighting system
в aisles between the racks;
Guarantee - from 2
Specifications
Length of section 1000m
Depth of the section Up2m
Load on storage tier up to 4000 kg
The width of the work corridor 0.8 to4m
Number of floors 2 to 4
Load on 1 sq m
up to 1000 kg
shelf storage
MDF, lattice
Overlap type
galvanized metal
Typeof floor ok DSP, MDF, OSB, metal
Standard colours blue (RAL 5005, 5015), Multi-storey construction based on pallet
Orange (RAL 2004) Racking.
Shelves for shelving
Shelves from DSP
Shelves for shelvingin cut under the necessary sizes of the sheet of CPD
thickness from 10 to 38 mm.
The shelf from the DSP is overhead.
In order for the stove to withstand high loads, use special metal jumpers, cross beams
with welded at the ends special brackets, which arelaid on the racks, and on them are
shelves.
MMetal shelves
Metal shelves are assembled from galvanized panels, which, depending on the
necessary loads, are made of steel of varying thickness. Each panel has rigidity edges,
thanks to which the style of shelves does not sagunder the weight of cargo.
Net shelves
The metal shelf is set.
Netted shelves are made of high-pitched steel wire. The stiff edges are welded to the
grill to strengthen. The shelves are galvanized or covered with powder enamel. This
design can take up to 1,000 kg of distributed load.
The mesh shelves are not corrosion-free and perfectly let the light through, which is
important in low-light storage areas. Ideal for products that require good ventilation.
You can use anytemperature regimes.
The shelves are netted.
Overlap systems based on racks
Reclaiming systemsbased on racks are used to increase the size of the warehouse area
and can withstand up to 1,000 kg per sq m. The special purpose of this structure is
that the basis of the carrier frame is not columns, but racks.
Платформа на базе стеллажных рам.

overlap
The overlapping system based on the racks is

prefabricated
pallet shelving and platforms, as well as additionalx specialties
mezzanine elements.
The second tier is equipped with shelves to store small-scale
The frame profile (racks) have a rather complex shape, so the structure can withstand goods in boxes.
heavy loads - up to 1000 kg per 1 m. In the axal of the new platform are metal beams,
allowing evenlyto distributeloads on metal construction.
advantages
The platform is up to 10 m high.
Enhanced design is able to withstand up to 1000 kg per sq m;
Develop a uniquedesign for each customer.
A wide range of material for shelves and overlapping; The
ability to integrate the lighting system
в aisles between the racks; Organizing the set-up area: receiving, sorting and packing the
Guarantee - from 2 goods.
Specifications
Distance between frames 4 x3 m
Frame width from 0,4 to 1,5 m
Overlap type MDF, lattice galvanized metal
Height of railings 1.1m
The width of the stairs 0,8
blue (RAL 5005, 5015),

Standard color
Orange (RAL 2004)
The organizationis an office space with its own lighting and air
conditioning system.
Overlap systems (platforms)
The overlap system (platform) is designed to maximize the floor of the height of the
warehouse or production storage in the case when the storage of goods is carried out
not on the racks, but on the floor.
A large load on the overlap (up to 1000 kg per sq. m.) allows you to move or store
pallets or other bulk cargoes. People access to the ceiling are providedwith stairs or
elevators, and loaders, stackers, elevators or lift tables can be used to lift the load.
The ability to integrate electrical networks, ventilation systems

and firefighting.
The flooring system allows for office space, floor or racking space on the topfloor.
The main advantage of this design: itis much cheaper than the capital construction of
reinforced concrete floors, and is installed in a shorter time.
Remote columns give freedom to move under the
platform.
advantages
Easy to mount, transfer or expand; Create a
customized configuration
The ability to integrate electrical networks, ventilation and fire suppression
systems; Additional storage area above the receiving area (gate).
Modular design iscompletely cheaper than the capital

overlap; Guarantee - from 2
Specifications
Step column Up to6h6m
Column profile (frames) 100 X150 mm
The height of the overlap profile from 250 to 400 mm
Load on 1 sq m. Slab up to 1000 kg
Overlap type MDF, lattice galvanized metal
Height of railings 1.1m
The width of the stairs from 0,8 m

Solid overlap for 2
Standard color blue (RAL 5015) area on your own.
Gravitational racks
Gravitational racks provide efficient storage and loading of cargo. They are as roomy
as the entrance racks, but the movement of pallets in the entrance of the rack
isautomatic at the expense of roller guides.
Loading the pallet on the rack.
The work with gravitational racks is based on the principle of "FIFO" (the first pallet
came in, first came out). Due to the inclination of the guides and under the influence
of its own weight there is an autonomous shiftof the pallet downwards until it
reaches the last pallet in thechannel.
Two-channel section of gravitational rack with restrictive
rollers.
advantages
allow you to make the most of the warehouse area (up to 70
Thanks to the FIFO principle, the inventory rotation takes place
Automatically.
Moving cargo quickly between different parts of the warehouse
saving on lighting, as the fixtures can be
Only at loading and unloading sites
the cost of cooling in freezers is significantly higher
are being reduced byreducing the volume of the warehouse;
Maximum staff safety when dealing with racks; Guarantee - from 2
Specifications
The unloading zone. It is possible to be processed by a forklift or
The height of the rack Up to12m a ricktrac.
Maximum pallet weight 1 200 kg
The angle of the guide 4 town.
Standardtemperature from–20° to +35°С
Standard colours blue (RAL 5015), orange (RAL 2004)
A special unloading module for 1 remove pallets with a

hydraulic trolley.
Shelving Push Back
Push Back stores are progressive shelves for glued pallet storage, with storage lines
similar to the entrance of the no, gravitational or shuttle racks.
Suitable for the organization of space in warehouses atflat tar storage of the most
diverse goods of medium turnover.
The construction of the rack clearly fixes pallets in the channel, which
prevents the cargo from going beyond the system, thereby ensuring the
safe operation of warehouse employees.
The system is built on the principle of LIFO - the product that was lastloaded, the first
to be unloaded.
The Push Back system consists of specific frameworks (cassettes) that The loading is carried out on pallets 1200x800 mm,
1200x1000mm and 1165x1165 mm with aforklift.
move on the system of guides (horizontal beamam
itself) and vertical carrier racks. At every storage site except
extreme, pallets are placed on cassettes that are pushed out
by the guides.
advantages
Efficient filling of the warehouse High speed and intensity
Operating in lower-temperature warehouses;
Use almost any loading technique to handle pallets;
The ability to useeach level of design for different SKU;
Specifications
Height 12 m
Load on storage tier 1400 kg
Number of pallets per tier 5
Coverage type bythe rosy enamel
CPD, galvanized
The type of shelves
or painted metal
blue (RAL 5005, 5015),
Standard colours Orange (RAL 2004)
At each storage site, except the extreme, pallets are located on

cassettes, catore pushed out on the guides.
Shuttle racks
Shuttle pallet racks, as well as entry racks, are intended to store large volumes of
similar pallets. The shuttle system consists of a structure of racks deepabout
и processing devices. The pallet moves with the help of a self-propelled platform. The
use of this platform in conjunction with the construction of shelving gives the largest
storage capacity compared to other storage systems. The useof tthle shelving is a cold
and freezer, warehouses of dis tributes, logistics operators and production
companies.
Shuttle racks allow even moreoptimization of operations

in the warehouse.
After completing thetask, the shuttle returns to its original position and is ready to The self-propelled trolley (shuttle) is designed for long and uninterrupted
operation, including in freezer warehouses.
perform new tasks.
advantages
shuttle racks provide the maximum capacity of skfret among all
types of shelving;
The system is equipped with high-capacity batteries for long-term use and
provides maximum autonomy;
The battery replacement process is simple and takes a minimum of time,
making the system ideal forrefrigeration and freezers;
In the same shelving structures it is possible to load unloading on the By installing the shuttle on the rack and pressing the button on the
principle of LIFO or FIFO; radiopool, the loader operator canstill do the next operation.
Guarantee - from 2
Specifications
The height of the shelving Up to12m
Channel depth Unlimited
Maximum pallet weight 1 500 kg
Platform moving speed 0.8 - 1 m/s (with cargo/without cargo)
Type ofDons processed 1200x800, 1200x1000 mm and mixed
Minimum working temperature

For a large turnover or warehouse size
Standard colours blue (RAL 5015), orange (RAL 2004) Multiple shuttles can be used ata time.
Pallet mobile racks
Pallet mobile racks are designed for a more compact storage of palletized goods.
Mobile racks allow to increase the number of pallets stored by 80% compared to
conventional pallet racks, or to reduce the warehouse area by 50% to store the same
amount of cargo.
Where compact storage is required on a par with the high steppe of New Accessibility,
mobile racks can be an ideal solution, especially if storage space is very expensive,
such as in holo wild and freezers.
Mobile racks in the freezer.
Mobile pallet racks are the usual front racks, the mouth is renewed on special Installation of mobile shelving requires a perfectly level floor.
mobilebases, interseded with electric motors.
Despite the relatively high cost, such advantages as the availability of each pallet and
the high bridge togethermake them the most efficient and cost-effective in
refrigeration and freezers.
advantages
Savings in investments in the construction of new storage space;
Access to any pallet at any given time.
an 80% increasein storage in an existing warehouse or savings of up to 50% of
the area in the construction of a new one; Reducing operating costs in
refrigeration
When staff work in an open corridor, laser sensors do not allow
и Freezers; Guarantee - racks to move.
from 2
Specifications
Up to
Base length(series) 50 m
Up to
Number of double rows in the block 13 state
Capacity 1 400 tons
Speed 4
Standard colours blue (RAL 5015), orange (RAL 2004)
The installation of P-D stations above the aisles furthersharpens

the capacity of mobile shelving.
Console racks
Console racks are the most specialized and optimal system for storing long cargoes,
various in number, weight and size (plastic and mmetalprofile, pipes, wooden slats,
boards and slabs).
The console rack system is a prefabricated metal structure consisting of racks, basics,
consoles (loads for cargo) and rigidity elements (screeds).
No limit on the length of cargo allows you to store different parts on

onerack.
Rack, base and console

racks, made of hot-rolled steel profiles IPE different sizes and thicknesses (selected for
a specific load). In the dependable bridges from the method of handling cargo console
Perforation of the rack allows you to rearrange tiers at a height of 100
racks are divided into one-way and two-wayronies. mm in a step.
To ensure that the lengthy storage of the lengthest

cargo console racks can be made mobile by installing them
to mobile bases. In rooms with high ceilings based on con
solo racks can be organized platform (mezonin), which is
1
shelves or get extra
free space.
advantages
Convenience of storage and handling of long cargo No limit on
the length of stored goods;
A significant increase incapacious storage at high warehouse ceilings or when
shelving is installed on mobile bases; Guarantee - from 2
Specifications
Rack height Up to 11m
Distance between racks 0,5
Length of rack row Unlimited
Console length 0,5
Naload on 1 console up to 2 500 kg
Step rearranging tiers 50, 100 mm
Coverage type Powder enamel/hot zinc
Standard colours blue (RAL 5015) The jacks between the racks provide precise positioning of loading
equipment, which guarantees a safe robot with a lengthy load in narrow
aisles.
Protecting shelving
Warehouse racks are processed with the help of heavy storage of those niks, and
there are risks of collision of the loader with the frame of the stele of the lazh. Even a
small and not immediately noticedloader can cause deformation and wrecking of
shelving along with expensive goods.
The end frameis wooden.
The protection of shelving nseparates into the protection of racks (corner and
frontal) and the protection of the end of the entire frame of the rack.
The racks are angled (made from G profile) that protect the rack with 2
The end protection is metallic.
plinth protections to protect the rack with 3
Such protections are installedI am on the corners of the rows of shelving and in places
about riding equipment, for example, in the channels of the entrance shelving.
The end protection of the frame is horizontal beams of a straight coal section, which
are attached to the protection of the racks, thereby protecting the extreme frame of
the rackof the row.
advantages
Resistance to the impacts of warehouse machinery;
Significant savings on the repair of expensive shelving elements;
The jacks to protect the rack racks.
The ability to install protection on all types of shelving;
Extending the life of the shelving; Guarantee -
from 2
Specifications
The height of the rack protection 400mm
Metal thickness 4
Number of anchor bolts for fastening 4
The type of shelves powder enamel
blue (RAL 5005, 5015),

Standard colours
Orange (RAL 2004)
Develop and implement individual projects.
Self-carrying warehouses based on steleof cool structures
Self-carrying warehouses are a profitable solution for storage and processing
Cargo. Self-carrying warehouses are designed on the basis of different types of stella
I don't know what to do. The shelving structure, in addition to storing the goods, is also not
the structure of the warehouse.
A self-carrying warehouse based on console racks.
Such a system does not require the implementation of a full-fledged project

document and approval in the city planning authorities, because it is introduced
в operation as a temporary structure. This, accordingly, certainly saves time to
develop the project and to implement it as a whole. A self-carrying warehouse based on palletracks.
The structure of the warehouse consists of racks and traverse. Shelving frames reach
the ceiling of the warehouse. On their base formed a frame for the ceiling or roof of
the warehouse. Traverses serve to organize the levelof th storage and provide rigidity
for the entire structure, as well as complement the frame of the building for further
cladding of the warehouse sandwich
The construction of shelving withstands not only the weight of stored goods, but also
reliably resists wind and snow.
Fast-moving self-carrying warehouses can be designed

on the basis of:
Fast-moving self-carrying warehouses.
Construction time from 90 days.
Lubin (entry) shelving;
advantages
building a self-carrying warehouse is more optimal
Capital construction;
Rapid development of the project
Fast warehouse construction time from 3
Any shelving systems can be obtained inside the warehouse.
prefabricated
и Collect a self-carrying warehouse elsewhere.
Guarantee - from 2
The roof and cladding of the walls are fixed directly on the
elements of shelving.
(Certified Racks (AS/RS)
These systemsinvolve automated processing of cargo on racks without human
involvement.
Automatedresidents are used in modern warehouse complexes in a wide variety of

areas where high turnover and order processing speed areimportant.
Miniload system for storing and processing plastic boxes and piece
goods.
The robot sets the box na rack.
Regardless of the type of shelving and type of storage container, they are all sorted
Specialtyed faucet
guides, fixed from above and below. tap
remove the cargo from the cell and move it to the selection area, or deliver iton the
assembly line immediately.
advantages
Increase warehouse performance
The absence of errors related to the so-called "human factor";
Reducing cargo damage
Saving resources and operating costs
Staff safety
Guarantee - from 2
Specifications
The height of the shelving Up to 45m
Maximum weight
1600/1200/120 kg
pallet/container/box
The speed of the crane horizontally Up to 6 m/s
Open Face racks. Allow safe and effectivebut
The speed of the crane vertically Up to 3 m/s Store containers.
Vertical lift systems
Lift system
delivers shelves (pallets) with stored goods to the access window. Working on the
principle of "goods tothe christmas tree" rather than "man to goods", the elevator
system allows to reduce the storage area by 90% and 4 times increase the speed of
the equipment.
Lift systems can significantly reduce the number of staff.
The access window lighting provides productive work throughout the

day.
Lift systems can be used in any areas of activity where you need tohr anise and
process small parts (in boxes or piece).
advantages
Accelerating the set-up through the "goods-to-man" principle;
Saving warehouse space of up to 80% compared to classic shelves;
High security for the operator and the stocked goods;
Improving the accuracy of operations to 99.99%;
On one shelf you can install partitions of different sizes.
Specifications
The height of the system 2,5
System width 1,25
Depth of the system 2.30/2,90/3.10 m
The depth of the shelves 0.61/0.81/0.86 m
Distance between shelves 25mm
Maximum cell height 0.75m
Maximum load on the shelf 725 kg
Vertical speed
up to 2.3 m/sec
moving extractor
Access windows in elevator systems can be arranged
Maximum rack loading 120 tonnes on several floors.
Vertical carousel systems
The vertical merry-go-round system is an automated and computer-driven vertical
merry-go-round in which shelvesare given to the access window in accordance
with theoperator's team.
The carousel rack system works on the principle of "goods to the man ku" rather
than "man to thatvaru", it automatically searches and determines the location of the
necessary shelf with the desired goods by pressing a button or scanning the stroke of
a search of the TMC.
Vertical merry-go-rounding systems are used to store the same type of

small cargo.
The access area is equipped with a convenient stand for processing

goods.
The carousel system requires only a few square metersof space and uses the entire
height to the ceiling in the front of any warehouse or factory, thanks to its compact
and durable design.
Pre-propertytwa
Acceleration of the equipment thanks to the principle of "goods to man" and
high speed of rotation;
Saving warehouse space by up to 60% compared to classic shelves;
particularlyoutsto made merry-go-round racks when storing homogeneous
Products in plastic trays;
Saving the area through merry-go-rounding systems allows for
additional jobs.
Specifications
The height of the system 2,3
System width 2,80
Depth of the system 1,25
The depth of the shelves 0,425
Distance betweenthe litres 25mm
Maximum cell height 0.5m
Maximum load on the shelf 650 kg
Maximum rack loading 23 tons
The shelf with the right goods is always at the ergonof the omich
height for work.
Horizontal carousel systems
It is an automated and computer-controlled horizontal merry-go-round, created on
the principle of "goods to man." It consists of an oval transporter withshelves, sodas
hanging boxes.
С Up to 3 carousels can be maintained in one

workplace.
The carousels are covered with protective fences on all sides. It's a warning.
rotates the possibility of accidents and protects against unauthorized
access. The access window is equipped with automatic doors
For safe operation, the carousel systems are fenced.
m and that only open at the time of selection or loading of the goods.
The horizontal carousel system always chooses the shortest path of the goods to the
access window. Storage cells are reflected on the LCD monitor, making the work
simple, fast and convenient.
advantages
Acceleration of the equipment thanks to the principle of "goods to man" and
high speed of rotation;
her racio'suse of narrow and low
Warehouse plots
Cell height can be adjusted in 75 mm increments
Easy maintenance at the expense of
self-smearing bearings;
guarantee - from 12 monthsofyaks.
Specifications
The height of the system up to 4.1 m
The length of the system Up to 60m
System width up to 1.83 m
Speed 24 m/min
Maximum shelf width 0,96 m
Maximum shelf depth 0,61 m
Payload per support 450, 680, 900 kg
Maximum system load 54,5 Tons The height of the cells can be adjusted in a step of 75 mm.
Kiev, 100 000 000 E. Sverstuyuka, 13
Floor 2, 02002
tel./fax: (044) 501
and
WWW.TOOLS.TOV-VAP.COM.UA
Our Internet
www.ssk

Shelving Systems English

Uploaded by

Copyright:

Available Formats

Shelving Systems English

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Shelving Systems English

Uploaded by

Copyright:

Available Formats

Shelving Systems

Stationary - Dynamic Racks Automated Storage

Effective storage and safety

Typical configuration of pallet shelving. 5 tiers high on 2 m, the weight of the

To organize a zone of selection of piece goods on the lowertiers of Stella ya can

Length of section 1,8

Depth of the section 0,5

Load on storage tier up to 6 000 kg

Load on the section up to 40,000 kg

Step rearranging tiers 50mm

Coverage type powder enamel, zinc

blue (RAL 5005, 5015),

With the use of narrow-passing equipment, the capacity of pallet racks

The entrance to the sewer channel is protected by jacks

Canal width 1,35

Channel depth Up to18m

Масса паллеты up to 2 000 kg

Step rearranging tiers 50mm

Coverage type powder enamel, zinc

blue (RAL 5005, 5015),

Loading/unloading racks can be done by a loader or a stacker.

Presented type of shelving - one of the most sought-after.

Smart shelving is made in galvanization or covered with

Constructor racks. Maximum load on the rack tier

Load on the shelf 80

Step rearranging tiers 38/50mm

Coverage type powder enamel, zinc

The type of shelves CPD, galvanized or dyed metal

Standard colours blue, gray, orange

Smart shelf protection

The floor structure is based on the Mega shelves with

Access to people's overlap is provided through stairs or

Specifications The overlap is placed on special longitudinal

Depth of the section up to 1.5 m

Load on storage tier up to 1000 kg

The width of the work corridor from 0,8 to 1,5 m

Load on 1 sq m overlap up to 300 kg

A wide variety of options allow you to create a uniqueand

Metal mezzanine can withstand more than 10 tons of

Length of section 1000m

Depth of the section Up2m

Load on storage tier up to 4000 kg

The width of the work corridor 0.8 to4m

Load on 1 sq m overlap up to 1000 kg

Typeof floor ok DSP, MDF, OSB, metal

The metal shelf is set.

The shelves are netted.

Платформа на базе стеллажных рам.

The overlapping system based on the racks is

Frame width from 0,4 to 1,5 m

Load on 1 sq m overlap up to 500 kg

Overlap type MDF, lattice galvanized metal

Height of railings 1.1m

The width of the stairs 0,8

blue (RAL 5005, 5015),

The ability to integrate electrical networks, ventilation systems

Modular design iscompletely cheaper than the capital

Column profile (frames) 100 X150 mm

The height of the overlap profile from 250 to 400 mm

Load on 1 sq m. Slab up to 1000 kg