Scribd Logo
Upload

Welcome to Scribd!

  • 104 views

    Declaration of Conformity: Elcometer Limited

    Uploaded by

    hadyan rafdi
    This document is a declaration of conformity for the Elcometer 456 Model B Coating Thickness Gauge. It declares that the gauge and its listed parts comply with the 2014/30/EU Electromagnetic Compatibility Directive and the 2011/65/EU Restriction of Hazardous Substances Directive. It was issued by Elcometer Limited and signed by the managing director, stating that the gauge meets the standards of EN 61326-1:2013 for electrical equipment EMC requirements, IEC 61326-1:2012, and EN 63000:2018 for technical documentation on restricted hazardous substances.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Declaration of Conformity: Elcometer Limited

    Uploaded by

    hadyan rafdi
    104 views1 page
    This document is a declaration of conformity for the Elcometer 456 Model B Coating Thickness Gauge. It declares that the gauge and its listed parts comply with the 2014/30/EU Electromagnetic Compatibility Directive and the 2011/65/EU Restriction of Hazardous Substances Directive. It was issued by Elcometer Limited and signed by the managing director, stating that the gauge meets the standards of EN 61326-1:2013 for electrical equipment EMC requirements, IEC 61326-1:2012, and EN 63000:2018 for technical documentation on restricted hazardous substances.

    Original Title

    DoC_456C_B

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a declaration of conformity for the Elcometer 456 Model B Coating Thickness Gauge. It declares that the gauge and its listed parts comply with the 2014/30/EU Electromagnetic Compatibility Directive and the 2011/65/EU Restriction of Hazardous Substances Directive. It was issued by Elcometer Limited and signed by the managing director, stating that the gauge meets the standards of EN 61326-1:2013 for electrical equipment EMC requirements, IEC 61326-1:2012, and EN 63000:2018 for technical documentation on restricted hazardous substances.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    104 views1 page

    Declaration of Conformity: Elcometer Limited

    Uploaded by

    hadyan rafdi
    This document is a declaration of conformity for the Elcometer 456 Model B Coating Thickness Gauge. It declares that the gauge and its listed parts comply with the 2014/30/EU Electromagnetic Compatibility Directive and the 2011/65/EU Restriction of Hazardous Substances Directive. It was issued by Elcometer Limited and signed by the managing director, stating that the gauge meets the standards of EN 61326-1:2013 for electrical equipment EMC requirements, IEC 61326-1:2012, and EN 63000:2018 for technical documentation on restricted hazardous substances.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Elcometer Limited

    Edge Lane, Manchester


    M43 6BU. England
    Tel: +44 (0)161 371 6000
    Fax: +44 (0)161 371 6010
    [email protected]

    Declaration of Conformity www.elcometer.com


    REGISTERED NO. 1729726 ENGLAND
    Accredited to ISO 9001
    ISO 14001

    The Directives covered by this declaration:

    2014/30/EU Electromagnetic Compatibility


    2011/65/EU Restriction of the use of certain hazardous substances

    Declares that the product(s): Elcometer 456 Model B Coating Thickness Gauge

    Part Number(s): A456CFBI1, A456CFBI2, A456CFBI3, A456CFBS, A456CFNFBI1,


    A456CFNFBS, A456CNBI1, A456CNBS

    Product Option(s): T456CF1E, T456CF1P, T456CF1R, T456CF1S, T456CF1U,


    T456CF2ARM, T456CF2B, T456CF2P, T456CF2PHT, T456CF2R, T456CF2S, T456CF2SW,
    T456CF2SW-15, T456CF2SW-30, T456CF2SW-5, T456CF2SW-50, T456CF2T, T456CF2U,
    T456CF3P, T456CF3S, T456CF6ARM, T456CF6S, T456CF7ARM, T456CFM3---A, T456CFM3---C,
    T456CFM3R45A, T456CFM3R45D, T456CFM3R90A, T456CFM3R90C, T456CFM5R90A,
    T456CFM7R45A, T456CFME5R90A, T456CFME5R90A-2, T456CFNF1P, T456CFNF1R,
    T456CFNF1S, T456CFNF1U, T456CN1AS, T456CN1P, T456CN1R, T456CN1S, T456CN2P,
    T456CN2S, T456CN6ARM, T456CN6S, T456CNM3---A, T456CNM3---C, T456CNM3R90A,
    T456CNM3R90C, T456CNM3R90E, T456CNM5R90A, T456CNM5R90C, T456CNM5R90E,
    T456CNMG3R90A, T456CNMG3R90C, T456CNMG3R90E, T465CFM3R90D, T99921325

    This declaration of conformity is issued under the sole responsibility of Elcometer Limited.
    The products identified above comply with the requirements of the above EU Directive by meeting the
    following standards:
    EN 61326-1:2013 Electrical equipment for measurement, control
    IEC 61326-1:2012 and laboratory use – EMC requirements
    Class B1, Group 12 ISM Part 1: General requirements.
    EN 63000:2018 Technical documentation for the assessment of
    electrical and electronic products with respect to
    the restriction of hazardous substances

    1
    Class B product: Suitable for use in domestic establishments and in establishments directly connected to a low voltage
    power supply network which supplies buildings used for domestic purposes.
    2
    Group 1 ISM product: Product in which there is intentionally generated and/or used conductively coupled radio-frequency
    energy which is necessary for the internal functioning of the equipment itself.

    Manchester, UK
    Signed: Date: 4th January 2021
    M. C. Sellars Authority: Managing Director
    TMA-0680 Issue 02

    You might also like