Scribd
Upload
85 views4 pages

IOT Home Automation: Project Proposal

The document proposes an IOT home automation project using an Arduino Esp 8266 with Wi-Fi module to remotely control devices via an Android app. The system allows controlling loads like lights, doors, buzzers through touch inputs on the app from anywhere. It provides advantages like improved security, energy efficiency and cost savings.

Uploaded by

waleed malik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
85 views4 pages

IOT Home Automation: Project Proposal

The document proposes an IOT home automation project using an Arduino Esp 8266 with Wi-Fi module to remotely control devices via an Android app. The system allows controlling loads like lights, doors, buzzers through touch inputs on the app from anywhere. It provides advantages like improved security, energy efficiency and cost savings.

Uploaded by

waleed malik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

University of engineering and Technology

Faisalabad Campus

Project Proposal

IOT Home Automation

Submitted by Submitted to
Muhammad Junaid Akbar Dr. Muhammad Usman
2019MC285

Muhammad Suleman
2019MC287

Muhammad Waleed
2019MC295

Muhammad Haris
2019MC287
Abstract

The main objective of this project is to develop a home automation system using an Arduino Esp 8266
with Wi-Fi module being remotely controlled by any Android OS smart phone. As technology is
advancing so houses are also getting smarter. Modern houses are gradually shifting from conventional
switches to centralized control system, involving remote controlled switches. Presently, conventional
wall switches located in different parts of the house make it difficult for the user to go near them to
operate. Even more it becomes more difficult for the elderly or physically handicapped people to so.
Remote controlled home automation system provides a most modern solution with smart phones.
In order to achieve this, a WIFI module is interfaced to the Arduino board at the receiver end while on
the transmitted end, A GUI application on the cell phone sends ON/OFF commands to the receiver
where loads are connected. By touching the specified location on the GUI, the loads can be turned
ON/OFF remotely through this technology.

Project Objective
The objective of this project is to implement a low cost, reliable and scalable Home system that can
be used to remotely switch on or off any Household appliance, using a microcontroller to achieve
hardware simplicity Low cost short messaging service for feedback voice dial from phone to toggle
the switch state.

Description of the project


This project is one of the important Arduino Projects. Arduino based home Automation using Bluetooth
project helps the user to control any electronic Device using Device control app on their Android
Smartphone. The android app The android app sends commands to controller- Arduino smart phone.
The android Sends commands to the Controller-Arduino through wireless communication, Namely Wi-Fi.
The Arduino is connected to the main PCB which has for exampe five Relays, Device 1- buzzer, Device 2-
Door, Device 3- lights. When the user presses on the On button displayed on the app for the device 1,
The Buzzer is switched on. The buzzer can be switched off, by pressing the same Button again. Similarly,
when the user presses on the ‘on’ button displayed on the app for the device 2 The door is open. the
door can be close by pressing the same button again.
This project of home automation using Wi-Fi and Arduino can be used for controlling any AC or DC
devices.
Hardware Requirement
The list of components mentioned here are specifically for different loads.

 Arduino Esp 8266.


 Wi-Fi module for connectivity.
 Push button.
 9-volt battery.
 1.5 volt led x4.
 Heat sink.
 330-ohm Resistor x 16
 BC547 transistor x 16
 Breadboard
 Smartphone
 Connecting wires.
 Diode1n4007 x 16
 1n4007 x 16
 Arduino ide complier

Advantages of Home Automation

1. Security
Tap your finger to turn on the lights when get home so you worried about What’s hiding in the
shadows. Or in your pathways. Or automate to turn on when You are not home to look like you are to
ward off potential robbers. Door lacks are another automated home product that increase your home
security.
2. Energy Efficiency
Increase your home energy efficiency by remotely powering off systems and appliances when they
aren’t in use. In addition to the standard home automation.Products that give you active control. Some
products actively monitor systems and arm the homeowner with knowledge. Insight and guidance to
achieve greater control and energy efficiency.

3. Saving
Home automation literally pays off. When you are use home systems and appliances only when
needed. The saving will apparent in the first Utility bill. No more wasting money on lights left on
when you are not home.
Applications of iot system
 Smart Cities
 Agriculture
 Factories
 Industrial Automation
 Factory Digitalization
 Safety and Security and a lot more

You might also like