CURRENT

&
NEW
AMINUDIN ABD AZIZ
SALES AND BUSINESS DEVELOPMENT
SERVICES
TESTING SERVICES DEPARTMENT
❑ ROLES OF TESTING SERVICES
DEPARTMENT
❑ RECOGNITIONS
❑ TESTING CAPABILITIES
❑ NEW SERVICES
o Government
Assist Regulatory Bodies (ST, BOMBA, SKMM,JPJ,
CIDB, DOSH, SPAN, Local Authorities) in implementing
regulations / legislations.
o Industry
Support companies’ Research and Development
activities
Test for compliance to company, association, national
and international standards.
Assist exporters meeting importing country’s
regulatory requirements.
IECEE CB Scheme
Issuing and Recognizing National Certification Body (NCB) and
Certification Body Testing Laboratory (CBTL) in the IECEE CB
Scheme.
Test Reports and Test Certificate recognized by almost 43 member
countries of the IECEE CB Scheme

Electrical & Electronic Test Lab

Recognised by CSA (Canada) as Qualified Testing Facilities.

Recognised by SASO (Saudi Arabia) as an approved laboratory

under ICCP
Packaging Laboratory

❑ Certified by the world renowned International

Safe Transit Association (ISTA).

❑ Test Report issued by SIRIM QAS Intl. is accepted

by ISTA / US market.
Provide wide range of testing services and
categorized into the following sectors:

1. Civil & Construction 6. Radio Frequency and

Electromagnetic Compatibility
2. Mechanical & Automotive (RFEMC)

3. Electrical & Electronic 7. Plastics & Composite Material

4. Energy Efficiency for Electrical 8. Material Integrity

Appliances
9. Chemical & Consumer
5. Fire Protection
TYPE OF PRODUCTS TESTED

❑ Cements, Ready-mixed concrete’ pavers,

natural stones
❑ Ceramic tiles, sanitary wares, clay pipes
❑ Mineral Rockwool
❑ Thermal insulation materials, acoustic
panels, energy efficiency glazing
❑ Playground equipment

❑ COA verification and approval for Iron and

Steel / COA exemption
Type of Products Tested
PPE equipment, Helmets, Packaging test - Jerrican, Palette,
Safety Shoes Plastic Containers, Boxes

Automotive Test - NGV, Side

Mirror, Light, Brake Pad Kerosene Stove, LPG
Regulator, Cooker Reliability test –
Electronics
Components,
Automotive
Components
 AUDIO
VIDEO

DOMESTIC
LAMP APPLIANCES
ACCESSORIES

ELECTRICAL
CABLES AND
WIRES AND PHOTOVOLTAIC
ELECTRONIC MODULES

WIRING ENERGY
ACCESSORIES EFFICIENCY

CONSIGNMENT
FOR IMPORTED
EE PRODUCTS
❑ Television
❑ Refrigerator
❑ Air conditioner
❑ Washing Machine
❑ Domestic electric fan
❑ Lamp and photometry
❑ Ballast for fluorescent
lamp
Type of Products Tested
❑ Industrial Chemicals, Cement
❑ Detergents, Herbal product,
Cosmetics
❑ Food products -Spices, Sugar
❑ Varnish, Road marking paints, Paints
❑ Fabrics, Carpets
❑ Lubricant - Fuel Oil, Gear Lubricant
Type of Products Tested

❑ Door sets
❑ Lift Landing Door
❑ Brick / Block Walls
❑ Drywall Partition / Panel System
❑ Penetration Seals
❑ Roller Shutter Assemblies
❑ Fire Extinguishers
❑ Landing Valves
❑ Ducting
Type of Products Tested
❑ Telecommunication Product
- Wireless Product
- Telephony Product
❑ Electrical Electronic Product
- Information Technologies Equipment
- Industrial, Scientific and Medical Equipment
- Audio Video Product
- Household appliances
- Automotive Sub Assemblies
- Electric Motor Bike
Type of Products Tested
❑ Plastic Resin, Plastic Products,
Tanks, Pipes and Fittings,
Aerospace Composite Materials

❑ Plastics Material Analysis Services

via various Characterization Tools
(DMA, TMA, DSC, TGA)
 •Failure
• Tensile test for metal Investigation
Products
•On-site
• Dynamic test for
metal Products assessment –
• Charpy
Replica, Creep
damage
• 3 point bend test
• Chemical
MATERIAL MATERIAL •Laboratory test
• Hardness SCIENCE ANALYSIS
• Salt Spray

LIFTING COA FOR

DEVICES IRON AND
• Breaking Load Test
• Proof load test
STEEL
• Ladder Test •Mechanical test
• PC Strand Test •Chemical Composition
test
•Coating mass test
1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing Fire Resistant Test
4. Tint film for Road Vehicle
5. Gas Appliances -Domestic Gas Cooker
6. Playground Surfacing Test
7. IGU Test
8. Fire Performance of External Cladding System
9. Material Integrity and Analysis
Primary Battery:
Standard: MS IEC 60086

▪ Type of battery: Size-AA, AAA, AAAA,C,D and 9V

▪ Application: Primary batteries designed or intended

for consumer and household such as - torch light,
remote control etc…

▪ Regulation: KPDNKK’s Consumer Protection (Safety

Standards For Primary Batteries) Regulations 2013
Secondary Battery
 Secondary Battery

❑ Standard : IEC 62133:

Secondary cells and batteries
containing alkaline or other
non-acid electrolytes
❑ Type of battery: Lithium-ion,
Nickel cadmium
❑ Application: Batteries for
laptop, hand-phone, vape,
etc…
❑ Regulation: To be regulated
by KPDNHEP
 Secondary Battery

APPLIATION FOR CERTIFICATION a) Applicant submits test report to

SIRIM QAS (certification body) for
application of labels or
**a battery supplier which certification mark
includes importer, Application by
a SUPPLIER b) SIRIM QAS will conduct scheme
manufacturer and trader
Type 5 or Type 1b certification
process
c) SIRIM QAS will issue label

Local Manufacturer Foreign Manufacturer / Importer (Trader)

or
Apply Apply Apply
Product Certification Product Certification Batch Certification
Scheme (Type 5) Scheme (Type 5) Scheme(Type 1b)
(Consignment)
1. Battery

2. Photovoltaic Module Testing

3. Ventilation Duct Testing & Load Bearing Fire Resistant Test
4. Tint film for Road Vehicle
5. Gas Appliances -Domestic Gas Cooker
6. Playground Surfacing Test
7. IGU Test
8. Fire Performance of External Cladding System
9. Material Integrity and Analysis
❑ PV is the process of converting light
to electricity using semiconducting
materials e.g. PV module.

❑ Testing according to standard IEC

61215 (Part 1 and Part 2) and IEC
61730 (Part 1 and Part 2) covers both
crystalline silicon and thin-film
terrestrial PV module designs.
 2017 2018

Temperature Humidity Cyclic

Solar Simulator Wet Leakage Current Tester UV Chamber
Chamber

Robustness of Termination Testers

Cut Susceptibility Tester EL Camera System
 2019
Full Facility
Complete

Mechanical Load
Bypass Diode
Thermal Test

Outdoor Exposure Test

System

Hail Tester Pulse simulator

1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing
Fire Resistant Test
4. Tint film for Road Vehicle
5. Gas Appliances -Domestic Gas Cooker
6. Playground Surfacing Test
7. IGU Test
8. Fire Performance of External Cladding System
9. Material Integrity and Analysis
 Fire Resistance
Test On
Ventilation Duct
 Vertical Fire Resistance
Test Furnace

Horizontal Fire Resistance

Test Furnace
 Testing Standards:
• BSEN 1366-1:2014 Fire resistance
tests for service installations.
Ventilation ducts
• ISO 6944 :20018 Fire containment -
- Elements of building construction
-- Part 1: Ventilation ducts
 TEST SET-UP (FRONT VIEW)

Test set-up for Fire Resistance

Test on Ventilation Duct TEST SET-UP (SIDE VIEW)
1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing Fire Resistant Test

4. Tint film for Road Vehicle

5. Gas Appliances -Domestic Gas Cooker
6. Playground Surfacing Test
7. IGU Test
8. Fire Performance of External Cladding System
9. Material Integrity and Analysis
Implementation of “GARIS PANDUAN
PEMATUHAN STANDARD FILEM
PENGHADANG HABA KENDERAAN” by
KPDNHEP on 1st July 2020
This MS specifies methods and
requirements of visible light,
energy transmittance of solar
radiation and other related factors
for tint film on the glazing in road
vehicles.
 Test Requirements

WEATHERING TEST (DURABILITY)

- 1000 HOURS ULTRAVIOLET
RAY EXPOSURE

THERMAL TEST (ADHESIVE

QUALITY)
- BOIL TEST, or
- BAKE TEST

SOLAR PERFORMANCE
- UV TRANSMITTANCE
- VL TRASMITTANCE
- SOLAR FACTOR
1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing Fire Resistant Test
4. Tint film for Road Vehicle

5. Gas Appliances -Domestic Gas Cooker

6. Playground Surfacing Test
7. IGU Test
8. Fire Performance of External Cladding System
9. Material Integrity and Analysis
 Register at Online
Application System
MANUFACTURERS (Local) MANUFACTURERS ( Foreign/Importer ) (OAS) website
http://oas.st.gov.my/

Product Certification Type 5 Batch Certification Type 1b

(long-term) (short-term)

Apply from SIRIM Product Certification Apply from SIRIM Type Test
Scheme (TYPE 5) Report Evaluation

TYPE 5 Assessment Apply Certificate of Approval

from ST
Award of License
Apply from SIRIM Product
Apply Certification Scheme (TYPE 1b)
Certificate of Approval
from ST TYPE 1B Assessment

SIRIM-ST Label Award of Batch Certificate

BY SIRIM LINK
Surveillance Program SIRIM-ST Label
Optical Ultra Dynascope,
Weathering Chamber,
Pressure Tester, Flow Meter.
Endurance / Duty Cycle
Tester, Vibration Machine,
Gas Wet Meter.

Testing Equipment
Salt Spray/Corrosion Tester,
Soap-Film Leak Tester, CO
Analyzer, Sound Level Meter,
Rubber Hardness Tester
(Shore A and IRHD), Wooden
Temperature Panel.
1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing Fire Resistant Test
4. Tint film for Road Vehicle
5. Gas Appliances -Domestic Gas Cooker

6. Playground Surfacing Test

7. IGU Test
8. Fire Performance of External Cladding System
9. Material Integrity and Analysis
STANDARDS:

MS 966: 2017, Playground Equipment – Safety

performance for Public use – Specification
(Second Revision

MS 2665-1:2017, Playground Surfacing –Part

1:- Standard Guide

MS 2665-2: 2017, Playground Surfacing-Part

2: Impact Attenuation Of Surfacing Materials
Within The Use Zone Of Playground
Equipment – Specification
 Loose-Fill Rubber
– ASTM F 3012

Types of Playground
Surface and
Standards

Engineered Wood Fiber –

ASTM F 2075

Poured-In-Place Surface
Systems – ASTM F 2479
 Drop Height, fall height
on top climbers

Drop height, fall height

for swing on pivot
point
Impact Test system together
with recording devise
1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing Fire Resistant Test
4. Tint film for Road Vehicle
5. Gas Appliances -Domestic Gas Cooker
6. Playground Surfacing Test

7. IGU Test
8. Fire Performance of External Cladding System
9. Material Integrity and Analysis
STANDARD : MS 2666 : 2016
Glass in buildings - Insulating
glass unit (IGU) - Performance
and evaluation
 Accelerated Weathering Test Equipment

SIMULATE WEATHERING CONDITIONS:

❑ UV
❑ COLD
❑ HIGH TEMPERATURE
❑ HUMIDITY

Condition Max Standard’s

Parameter Requirement
UV
Cold - 40 ºC -20 ºC
High Temp
100 ºC 60 ºC
Humidity 95% 90%
 Solar Factor Test
Equipment

Thermal Conductivity
Test Equipment

Emissivity Test
Equipment
1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing Fire Resistant Test
4. Tint film for Road Vehicle
5. Gas Appliances -Domestic Gas Cooker
6. Playground Surfacing Test
7. IGU Test

8. Fire Performance of External Cladding System

9. Material Integrity and Analysis
 Fire Performance of External Cladding
BS8414-1:2015 Systems. Part 1: Test Method for Non Load
+ A1:2017 Bearing External Cladding Systems Applied
to the Masonry Face of a Building.

Fire Performance of External Cladding

BS8414-2:2015 Systems. Part 1: Test Method for Non Load
+ A1:2017 Bearing External Cladding Systems Fixed to
and Supported by a Structural Steel Frame
 SIRIM QAS INTL. IS THE ONLY
3RD PARTY TESTING BODY
IN SOUTH EAST ASIA
Performance Criteria :
 External Fire Spread
 Internal Fire Spread
 Visible Flaming
 Mechanical Performance
 Burning Debris and Pool Fires
 System Burn Through
1. Battery
2. Photovoltaic Module Testing
3. Ventilation Duct Testing & Load Bearing Fire Resistant Test
4. Tint film for Road Vehicle
5. Gas Appliances -Domestic Gas Cooker
6. Playground Surfacing Test
7. IGU Test
8. Fire Performance of External Cladding System

9. Material Integrity and Analysis

Failure Investigation

• Failure investigation on Metallic Materials i.e Iron base e.g. Cast Iron, Carbon
Steel, low alloy steel, stainless steel, Copper Base, Aluminium

On-Site Jobs

• Plant Condition Assessment, Fire and Creep Damage Assessment of High

Temperature, Plant Component Hardness Test, Hardness Test, On-site
Analysis

Laboratory Test

• Material Analysis, Metallurgy, Coating and Corrosion Test

 TESTING FACILITIES

Optical Microscope Scanning Electron Microscope

Hardness Tester

Precision Cutter Portable Arc Spark Analyser

 THANK YOU
FOR INFORMATION
CONTACT US

603 5544 6400 603 5544 6810 [email protected] sirim-qas.com.my