AMOB parts list

stack with
Part Code Short Name Description Kit content Qty Engineering rules FCOA Wall Pole
flexi
subrack needed for AirScale SM installation
088757A.101 Cabinet assy in outdoor environment;
473952A AMOB AMOB subrack, with handle and padlock bracket for safety 1 Y Y Y Y
088792A.101 Site bag To be completed with cable glands or
conduits kits (available lower in this list)
max 1 AMFF per AMOB : depending on qty
AMFF Blind panel Assy Blank panel for ASIA; need to block the airflow on empty ASIA slot 087588A.102 Blind ASIA Assy 1 Y Y Y Y
474416A of ASIA
for AMOB Blank panel for ABIA; need to block the airflow on empty ABIA slot 087590A.102 Blind ABIA Assy 5
(If 2xASIA and 6xABIA, no AMFF needed)
Y Y Y Y
New upper Mounting brackets for FCOA,19inch rack, 19inch cabinet 089950A.101 Top mount bracket Assy 2 Y
New lower Mounting brackets for FCOA,19inch rack, 19inch cabinet, needed for AMOB installation inside FCOA;
AMFG FCOA installation can also help to block the airflow on the bottom side (1U) 832390 bottom support bracket 1 Y
474417A max 1 per AMOB depending on if installed
kit for AMOB
FCOA new bottom support steel bracket needs to replace the into FCOA
832907 FCOA bottom steel bracket 2 Y
aluminum bottom support bracket from FCOA
AMOB stack mounting bracket 089830A.101 stack mounting bracket assy 1 Y
Front plastic cover assembly, need to be removed in FCOA otherwise it needed for AMOB installation on wall, pole
AMFH Stack Wall Pole will block air-flow 088895A. 101 plastic cover Assy 1 or in stack.; Y Y Y
474418A
installation kit for AMOB max 1 per AMOB if installed WALL or
831730 security bracket POLE or STACK
Security Bracket to hold AMOB in place (wall/pole) 1 Y Y Y

needed for pole AMOB installation; not

471649A FPKA FPKA Flexi Pole Kit 1 included in AMOB; Y
2xFPKA per AMOB if POLE
needed for wall/ pole AMOB installation; not
470149A FMFA Flexi Mounting kit FMFA 1 included in AMOB; Y Y
max 1 per AMOB if POLE or WALL
AMOB is delivered with one heater installed
AMFI Heater assembly for AMOB; represents the 2nd Heater for -40°C from factory (cold start within 2h); this 2nd
474419A AMFI 089834A.101 heater assembly for AMOB 1 O O O O
cold start within 1 Hour (NEBS requirement) heater is needed if cold start should be
done in 1h.
max 1 AMFJ per AMOB for all type of
P346920 Conduit Fitting, Straight 1.5 inch x2
installations*.
P351750 Conduit fitting, straight, 1.0 inch x3
474420A AMFJ Conduit fittings for AMOB both sides (6x 1.0inch, 4x1.5 inch) 1 *Exception: if AMOB installed in FCOA and Y Y Y Y
P351883 Conduit fitting, right angle, 1.5 inch x2
has 2 ASIA => no AMFJ can be used=>
P351884 Conduit fitting, right angle, 1.0 inch x3
use cable glands instead

P390369 Cable gland M32-2x8+4x5 x1 only 1 kit is needed for installation in FCOA;
P390346 Cable gland M32-4x5+6.3+3x7 x1 for stack installation 2 kits can be ordered,
474421A AMFK Cable glands on the AMOB left side 2x 1.5inch and 3x 1.0 inch P390343 Cable gland M32-8x6.3 x1 1 one for each side of AMOB. Y Y Y Y
P390348 Cable gland M50-4x14.8 x2 for wall/pole installation 1 kits can be
P395512  cable gland insert 24x5mm  x2 ordered, only bottom side of AMOB.

one Kit needed to stack other Flexi modules

474700A AMFO Stacking Kit for AMOB to support Flexi modules above 1 O
above AMOB
for Sprint having mMIMO specific
474860A  AMFT Front Cover for AMOB 1 O O O
installation kits
474792A AMFR Door Sensor Kit for AMOB 1 one Kit needed if door alarm requested O O O
one Kit needed if used armored oprical
474826A AMFS Cable Gland 12x8 for AMOB 1 O O O O
cables whith Ø7-8,2mm
475013A AMFU Noise reduction kit for AMOB - KDDI specific muffler 1 one kit needed per AMOB rack O O O
needed to install the FYGM GPS module
GPS bracket assemby for FYGM GPS module; support bracket, screw
474422A AMFL 088975A.101 GPS bracket assy 1 inside AMOB; O O O O
and ground cable for GPS installation inside AMOB
max 1 per AMOB with FYGM
473394A FYGM FYGM GPS module 1 O O O O
Note1: Y: needed, O: optional

088759A Internal fan Assy spares Lu Gang

088763A External fan Assy spares
088764A PDU Box Assy spares

Others for AMOB cabinet and ASMI

Category Items Description Notes Qty
Power cable AWG6 2
AMOB cables
Ground cable 16mm2 Connect with 1pcs of M5 dual lug on AMOB 1
1. Need to use special fibers with special diameter
and inner length (gland solution)
SFP fiber cable 48
2. Commscope(TMO's vendor) have discussed
ASMI cables with AMOB team for these fibers
(Full capacity)
RJ45 cable 8
HDMI cable 3
MiniSAS HD cable 4

# Nokia internal use